various speed-ups in TF_WriteImpl and elsewhere

FreeRTOSConfig.h

@@ -110,7 +110,7 @@ extern uint32_t SystemCoreClock;
 #define configCHECK_FOR_STACK_OVERFLOW           2
 #define configENABLE_BACKWARD_COMPATIBILITY      0
 
-#define configUSE_TIMERS                         1
+#define configUSE_TIMERS                         0
 #define configTIMER_TASK_PRIORITY                TSK_TIMERS_PRIO // above normal
 #define configTIMER_TASK_STACK_DEPTH             TSK_STACK_TIMERS //128
 #define configTIMER_QUEUE_LENGTH                 4

TinyFrame/TF_Integration.c

@@ -8,6 +8,7 @@
 #include "task_main.h"
 
 #include "USB/usbd_cdc_if.h"
+#include "USB/usb_device.h"
 #include "TinyFrame.h"
 
 extern osSemaphoreId semVcomTxReadyHandle;
@@ -15,6 +16,30 @@ extern osMutexId mutTinyFrameTxHandle;
 
 void TF_WriteImpl(TinyFrame *tf, const uint8_t *buff, uint32_t len)
 {
+#if 1
+    const uint32_t real_size = len;
+
+    // Padding to a multiple of 64 bytes - this is supposed to maximize the bulk transfer speed
+    if (len&0x3F) {
+        uint32_t pad = (64 - (len&0x3F));
+        memset((void *) (buff + len), 0, pad);
+        len += pad; // padding to a multiple of 64 (size of the endpoint)
+    }
+
+    // We bypass the USBD driver library's overhead by using the HAL function directly
+    assert_param(HAL_OK == HAL_PCD_EP_Transmit(hUsbDeviceFS.pData, CDC_IN_EP, (uint8_t *) buff, len));
+
+    // The buffer is the TF transmit buffer, we can't leave it to work asynchronously because
+    // the next call could modify it before it's been transmitted (in the case of a chunked / multi-part frame)
+
+    // the assumption here is that all until the last chunk use the full buffer capacity
+    if (real_size == TF_SENDBUF_LEN) {
+        if (pdTRUE != xSemaphoreTake(semVcomTxReadyHandle, 100)) {
+            TF_Error("Tx stalled in WriteImpl");
+            return;
+        }
+    }
+#else
     (void) tf;
 #define CHUNK 64 // same as TF_SENDBUF_LEN, so we should always have only one run of the loop
     int32_t total = (int32_t) len;
@@ -26,21 +51,36 @@ void TF_WriteImpl(TinyFrame *tf, const uint8_t *buff, uint32_t len)
         }
 
         const uint16_t chunksize = (uint16_t) MIN(total, CHUNK);
-        assert_param(USBD_OK == CDC_Transmit_FS((uint8_t *) buff, chunksize));
+
+        // this is an attempt to speed it up a little by removing a couple levels of indirection
+        assert_param(HAL_OK == HAL_PCD_EP_Transmit(hUsbDeviceFS.pData, CDC_IN_EP, (uint8_t *) buff, chunksize));
+
+//        USBD_LL_Transmit(&hUsbDeviceFS, CDC_IN_EP, (uint8_t *) buff, chunksize);
+//        assert_param(USBD_OK == CDC_Transmit_FS((uint8_t *) buff, chunksize));
 
         buff += chunksize;
         total -= chunksize;
     }
+#endif
 }
 
 /** Claim the TX interface before composing and sending a frame */
 bool TF_ClaimTx(TinyFrame *tf)
 {
     (void) tf;
-//    assert_param(osThreadGetId() != tskMainHandle);
-    assert_param(!inIRQ());
+//    assert_param(!inIRQ()); // useless delay
+    assert_param(pdTRUE == xSemaphoreTake(mutTinyFrameTxHandle, 5000)); // trips the wd
+
+    // The last chunk from some previous frame may still be being transmitted,
+    // wait for it to finish (the semaphore is given in the CDC tx done handler)
+    if (pdTRUE != xSemaphoreTake(semVcomTxReadyHandle, 100)) {
+        TF_Error("Tx stalled in Claim");
+
+        // release the guarding mutex again
+        assert_param(pdTRUE == xSemaphoreGive(mutTinyFrameTxHandle));
+        return false;
+    }
 
-    assert_param(osOK == osMutexWait(mutTinyFrameTxHandle, 5000));
     return true;
 }
 
@@ -48,5 +88,7 @@ bool TF_ClaimTx(TinyFrame *tf)
 void TF_ReleaseTx(TinyFrame *tf)
 {
     (void) tf;
-    assert_param(osOK == osMutexRelease(mutTinyFrameTxHandle));
+    assert_param(pdTRUE == xSemaphoreGive(mutTinyFrameTxHandle));
+
+    // the last payload is sent asynchronously
 }

TinyFrame/TinyFrame.c

@@ -870,7 +870,11 @@ static inline uint32_t _TF_FN TF_ComposeTail(uint8_t *outbuff, TF_CKSUM *cksum)
  */
 static bool _TF_FN TF_SendFrame_Begin(TinyFrame *tf, TF_Msg *msg, TF_Listener listener, TF_TICKS timeout)
 {
-    TF_TRY(TF_ClaimTx(tf));
+    bool suc = TF_ClaimTx(tf);
+    if (!suc) {
+        TF_Error("TF lock not free");
+        return false;
+    }
 
     tf->tx_pos = (uint32_t) TF_ComposeHead(tf, tf->sendbuf, msg); // frame ID is incremented here if it's not a response
     tf->tx_len = msg->len;
@@ -1031,10 +1035,10 @@ bool _TF_FN TF_Query_Multipart(TinyFrame *tf, TF_Msg *msg, TF_Listener listener,
     return TF_Query(tf, msg, listener, timeout);
 }
 
-void _TF_FN TF_Respond_Multipart(TinyFrame *tf, TF_Msg *msg)
+bool _TF_FN TF_Respond_Multipart(TinyFrame *tf, TF_Msg *msg)
 {
     msg->data = NULL;
-    TF_Respond(tf, msg);
+    return TF_Respond(tf, msg);
 }
 
 void _TF_FN TF_Multipart_Payload(TinyFrame *tf, const uint8_t *buff, uint32_t length)

TinyFrame/TinyFrame.h

@@ -369,7 +369,7 @@ bool TF_Query_Multipart(TinyFrame *tf, TF_Msg *msg, TF_Listener listener, TF_TIC
  * TF_Respond() with multipart payload.
  * msg.data is ignored and set to NULL
  */
-void TF_Respond_Multipart(TinyFrame *tf, TF_Msg *msg);
+bool TF_Respond_Multipart(TinyFrame *tf, TF_Msg *msg);
 
 /**
  * Send the payload for a started multipart frame. This can be called multiple times

USB/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c.rej

@@ -1,328 +0,0 @@
---- Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c	(date 1511202099000)
-+++ Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c	(revision )
-@@ -59,6 +59,7 @@
-   */ 
- 
- /* Includes ------------------------------------------------------------------*/
-+#include "usbd_msc.h" // for rejecting bad control messages
- #include "usbd_cdc.h"
- #include "usbd_desc.h"
- #include "usbd_ctlreq.h"
-@@ -103,34 +104,7 @@
-   * @{
-   */
- 
--
--static uint8_t  USBD_CDC_Init (USBD_HandleTypeDef *pdev, 
--                               uint8_t cfgidx);
--
--static uint8_t  USBD_CDC_DeInit (USBD_HandleTypeDef *pdev, 
--                                 uint8_t cfgidx);
--
--static uint8_t  USBD_CDC_Setup (USBD_HandleTypeDef *pdev, 
--                                USBD_SetupReqTypedef *req);
--
--static uint8_t  USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, 
--                                 uint8_t epnum);
--
--static uint8_t  USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, 
--                                 uint8_t epnum);
--
--static uint8_t  USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev);
--
--static uint8_t  *USBD_CDC_GetFSCfgDesc (uint16_t *length);
--
--static uint8_t  *USBD_CDC_GetHSCfgDesc (uint16_t *length);
--
--static uint8_t  *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length);
--
--static uint8_t  *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length);
--
--uint8_t  *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length);
--
-+#ifndef CDC_COMPOSITE
- /* USB Standard Device Descriptor */
- __ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
- {
-@@ -156,7 +130,7 @@
- 
- 
- /* CDC interface class callbacks structure */
--USBD_ClassTypeDef  USBD_CDC = 
-+USBD_ClassTypeDef  USBD_CDC =
- {
-   USBD_CDC_Init,
-   USBD_CDC_DeInit,
-@@ -172,6 +146,7 @@
-   USBD_CDC_GetFSCfgDesc,    
-   USBD_CDC_GetOtherSpeedCfgDesc, 
-   USBD_CDC_GetDeviceQualifierDescriptor,
-+  NULL
- };
- 
- /* USB CDC device Configuration Descriptor */
-@@ -456,6 +431,7 @@
-   0x00,
-   0x00                              /* bInterval */
- };
-+#endif
- 
- /**
-   * @}
-@@ -463,7 +439,7 @@
- 
- /** @defgroup USBD_CDC_Private_Functions
-   * @{
--  */ 
-+  */
- 
- /**
-   * @brief  USBD_CDC_Init
-@@ -472,7 +448,7 @@
-   * @param  cfgidx: Configuration index
-   * @retval status
-   */
--static uint8_t  USBD_CDC_Init (USBD_HandleTypeDef *pdev, 
-+uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev,
-                                uint8_t cfgidx)
- {
-   uint8_t ret = 0;
-@@ -514,18 +490,18 @@
-                  CDC_CMD_PACKET_SIZE);
-   
-     
--  pdev->pClassData = USBD_malloc(sizeof (USBD_CDC_HandleTypeDef));
-+  pdev->pClassData2 = USBD_malloc(sizeof (USBD_CDC_HandleTypeDef));
-   
--  if(pdev->pClassData == NULL)
-+  if(pdev->pClassData2 == NULL)
-   {
-     ret = 1; 
-   }
-   else
-   {
--    hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
-+    hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData2;
-     
-     /* Init  physical Interface components */
--    ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init();
-+    ((USBD_CDC_ItfTypeDef *)pdev->pUserData2)->Init();
-     
-     /* Init Xfer states */
-     hcdc->TxState =0;
-@@ -560,7 +536,7 @@
-   * @param  cfgidx: Configuration index
-   * @retval status
-   */
--static uint8_t  USBD_CDC_DeInit (USBD_HandleTypeDef *pdev, 
-+uint8_t  USBD_CDC_DeInit (USBD_HandleTypeDef *pdev,
-                                  uint8_t cfgidx)
- {
-   uint8_t ret = 0;
-@@ -579,11 +555,11 @@
-   
-   
-   /* DeInit  physical Interface components */
--  if(pdev->pClassData != NULL)
-+  if(pdev->pClassData2 != NULL)
-   {
--    ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->DeInit();
--    USBD_free(pdev->pClassData);
--    pdev->pClassData = NULL;
-+    ((USBD_CDC_ItfTypeDef *)pdev->pUserData2)->DeInit();
-+    USBD_free(pdev->pClassData2);
-+    pdev->pClassData2 = NULL;
-   }
-   
-   return ret;
-@@ -596,20 +572,23 @@
-   * @param  req: usb requests
-   * @retval status
-   */
--static uint8_t  USBD_CDC_Setup (USBD_HandleTypeDef *pdev, 
-+uint8_t  USBD_CDC_Setup (USBD_HandleTypeDef *pdev,
-                                 USBD_SetupReqTypedef *req)
- {
--  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
-+  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData2;
-   static uint8_t ifalt = 0;
-     
-   switch (req->bmRequest & USB_REQ_TYPE_MASK)
-   {
-   case USB_REQ_TYPE_CLASS :
-+    if (req->bRequest == BOT_GET_MAX_LUN) break; // Not ours!
-+    if (req->bRequest == BOT_RESET) break; // Not ours!
-+
-     if (req->wLength)
-     {
-       if (req->bmRequest & 0x80)
-       {
--        ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest,
-+        ((USBD_CDC_ItfTypeDef *)pdev->pUserData2)->Control(req->bRequest,
-                                                           (uint8_t *)hcdc->data,
-                                                           req->wLength);
-           USBD_CtlSendData (pdev, 
-@@ -629,7 +608,7 @@
-     }
-     else
-     {
--      ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest,
-+      ((USBD_CDC_ItfTypeDef *)pdev->pUserData2)->Control(req->bRequest,
-                                                         (uint8_t*)req,
-                                                         0);
-     }
-@@ -661,14 +640,15 @@
-   * @param  epnum: endpoint number
-   * @retval status
-   */
--static uint8_t  USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum)
-+uint8_t  USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum)
- {
--  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
-+  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData2;
-   
--  if(pdev->pClassData != NULL)
-+  if(pdev->pClassData2 != NULL)
-   {
-     
-     hcdc->TxState = 0;
-+    USBD_CDC_TransmitDone(pdev);
- 
-     return USBD_OK;
-   }
-@@ -685,18 +665,18 @@
-   * @param  epnum: endpoint number
-   * @retval status
-   */
--static uint8_t  USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum)
-+uint8_t  USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum)
- {      
--  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
-+  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData2;
-   
-   /* Get the received data length */
-   hcdc->RxLength = USBD_LL_GetRxDataSize (pdev, epnum);
-   
-   /* USB data will be immediately processed, this allow next USB traffic being 
-   NAKed till the end of the application Xfer */
--  if(pdev->pClassData != NULL)
-+  if(pdev->pClassData2 != NULL)
-   {
--    ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Receive(hcdc->RxBuffer, &hcdc->RxLength);
-+    ((USBD_CDC_ItfTypeDef *)pdev->pUserData2)->Receive(hcdc->RxBuffer, &hcdc->RxLength);
- 
-     return USBD_OK;
-   }
-@@ -715,13 +695,13 @@
-   * @param  epnum: endpoint number
-   * @retval status
-   */
--static uint8_t  USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev)
-+uint8_t  USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev)
- { 
--  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
-+  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData2;
-   
--  if((pdev->pUserData != NULL) && (hcdc->CmdOpCode != 0xFF))
-+  if((pdev->pUserData2 != NULL) && (hcdc->CmdOpCode != 0xFF))
-   {
--    ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode,
-+    ((USBD_CDC_ItfTypeDef *)pdev->pUserData2)->Control(hcdc->CmdOpCode,
-                                                       (uint8_t *)hcdc->data,
-                                                       hcdc->CmdLength);
-       hcdc->CmdOpCode = 0xFF; 
-@@ -730,6 +710,7 @@
-   return USBD_OK;
- }
- 
-+#ifndef CDC_COMPOSITE
- /**
-   * @brief  USBD_CDC_GetFSCfgDesc 
-   *         Return configuration descriptor
-@@ -737,7 +718,7 @@
-   * @param  length : pointer data length
-   * @retval pointer to descriptor buffer
-   */
--static uint8_t  *USBD_CDC_GetFSCfgDesc (uint16_t *length)
-+uint8_t  *USBD_CDC_GetFSCfgDesc (uint16_t *length)
- {
-   *length = sizeof (USBD_CDC_CfgFSDesc);
-   return USBD_CDC_CfgFSDesc;
-@@ -750,7 +731,7 @@
-   * @param  length : pointer data length
-   * @retval pointer to descriptor buffer
-   */
--static uint8_t  *USBD_CDC_GetHSCfgDesc (uint16_t *length)
-+uint8_t  *USBD_CDC_GetHSCfgDesc (uint16_t *length)
- {
-   *length = sizeof (USBD_CDC_CfgHSDesc);
-   return USBD_CDC_CfgHSDesc;
-@@ -763,7 +744,7 @@
-   * @param  length : pointer data length
-   * @retval pointer to descriptor buffer
-   */
--static uint8_t  *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length)
-+uint8_t  *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length)
- {
-   *length = sizeof (USBD_CDC_OtherSpeedCfgDesc);
-   return USBD_CDC_OtherSpeedCfgDesc;
-@@ -780,6 +761,7 @@
-   *length = sizeof (USBD_CDC_DeviceQualifierDesc);
-   return USBD_CDC_DeviceQualifierDesc;
- }
-+#endif
- 
- /**
- * @brief  USBD_CDC_RegisterInterface
-@@ -794,7 +776,7 @@
-   
-   if(fops != NULL)
-   {
--    pdev->pUserData= fops;
-+    pdev->pUserData2= fops;
-     ret = USBD_OK;    
-   }
-   
-@@ -811,7 +793,7 @@
-                                 uint8_t  *pbuff,
-                                 uint16_t length)
- {
--  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
-+  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData2;
-   
-   hcdc->TxBuffer = pbuff;
-   hcdc->TxLength = length;  
-@@ -829,7 +811,7 @@
- uint8_t  USBD_CDC_SetRxBuffer  (USBD_HandleTypeDef   *pdev,
-                                    uint8_t  *pbuff)
- {
--  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
-+  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData2;
-   
-   hcdc->RxBuffer = pbuff;
-   
-@@ -845,9 +827,9 @@
-   */
- uint8_t  USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev)
- {      
--  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
-+  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData2;
-   
--  if(pdev->pClassData != NULL)
-+  if(pdev->pClassData2 != NULL)
-   {
-     if(hcdc->TxState == 0)
-     {
-@@ -882,10 +864,10 @@
-   */
- uint8_t  USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev)
- {      
--  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
-+  USBD_CDC_HandleTypeDef   *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData2;
-   
-   /* Suspend or Resume USB Out process */
--  if(pdev->pClassData != NULL)
-+  if(pdev->pClassData2 != NULL)
-   {
-     if(pdev->dev_speed == USBD_SPEED_HIGH  ) 
-     {      

USB/STM32_USB_Device_Library/Class/MSC/Inc/usbd_msc.h.rej

@@ -1,60 +0,0 @@
---- Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Inc/usbd_msc.h	(date 1511202099000)
-+++ Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Inc/usbd_msc.h	(revision )
-@@ -58,9 +58,10 @@
- #define BOT_RESET                    0xFF
- #define USB_MSC_CONFIG_DESC_SIZ      32
-  
--
-+#ifndef MSC_CUSTOM_EPS
- #define MSC_EPIN_ADDR                0x81 
--#define MSC_EPOUT_ADDR               0x01 
-+#define MSC_EPOUT_ADDR               0x01
-+#endif
- 
- /**
-   * @}
-@@ -107,7 +108,7 @@
- USBD_MSC_BOT_HandleTypeDef; 
- 
- /* Structure for MSC process */
--extern USBD_ClassTypeDef  USBD_MSC;
-+extern USBD_ClassTypeDef USBD_MSC;
- #define USBD_MSC_CLASS    &USBD_MSC
- 
- uint8_t  USBD_MSC_RegisterStorage  (USBD_HandleTypeDef   *pdev, 
-@@ -118,8 +119,34 @@
- 
- /**
-   * @}
--  */ 
-+  */
- 
-+// XXX "static" moved here for use in composite driver
-+
-+uint8_t  USBD_MSC_Init (USBD_HandleTypeDef *pdev,
-+                        uint8_t cfgidx);
-+
-+uint8_t  USBD_MSC_DeInit (USBD_HandleTypeDef *pdev,
-+                          uint8_t cfgidx);
-+
-+uint8_t  USBD_MSC_Setup (USBD_HandleTypeDef *pdev,
-+                         USBD_SetupReqTypedef *req);
-+
-+uint8_t  USBD_MSC_DataIn (USBD_HandleTypeDef *pdev,
-+                          uint8_t epnum);
-+
-+
-+uint8_t  USBD_MSC_DataOut (USBD_HandleTypeDef *pdev,
-+                           uint8_t epnum);
-+
-+uint8_t  *USBD_MSC_GetHSCfgDesc (uint16_t *length);
-+
-+uint8_t  *USBD_MSC_GetFSCfgDesc (uint16_t *length);
-+
-+uint8_t  *USBD_MSC_GetOtherSpeedCfgDesc (uint16_t *length);
-+
-+uint8_t  *USBD_MSC_GetDeviceQualifierDescriptor (uint16_t *length);
-+
- #ifdef __cplusplus
- }
- #endif

USB/STM32_USB_Device_Library/Class/MSC/Src/usbd_msc.c.rej

@@ -1,35 +0,0 @@
---- Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Src/usbd_msc.c	(date 1511202099000)
-+++ Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Src/usbd_msc.c	(revision )
-@@ -116,7 +116,7 @@
-   * @{
-   */ 
- 
--
-+#ifndef MSC_COMPOSITE
- USBD_ClassTypeDef  USBD_MSC = 
- {
-   USBD_MSC_Init,
-@@ -279,6 +279,7 @@
-   0x01,
-   0x00,
- };
-+#endif
- /**
-   * @}
-   */ 
-@@ -530,6 +531,7 @@
-   return 0;
- }
- 
-+#ifndef MSC_COMPOSITE
- /**
- * @brief  USBD_MSC_GetHSCfgDesc 
- *         return configuration descriptor
-@@ -576,6 +578,7 @@
-   *length = sizeof (USBD_MSC_DeviceQualifierDesc);
-   return USBD_MSC_DeviceQualifierDesc;
- }
-+#endif
- 
- /**
- * @brief  USBD_MSC_RegisterStorage

USB/STM32_USB_Device_Library/Class/MSC/Src/usbd_msc_scsi.c.rej

@@ -1,37 +0,0 @@
---- Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Src/usbd_msc_scsi.c	(date 1511202099000)
-+++ Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Src/usbd_msc_scsi.c	(revision )
-@@ -190,14 +190,27 @@
-                    INVALID_CDB);
-     return -1;
-   }  
--  
--  if(((USBD_StorageTypeDef *)pdev->pUserData)->IsReady(lun) !=0 )
-+
-+  // XXX THIS SECTION IS MODIFIED FOR NOTIFY!
-+  // https://www.microchip.com/forums/m401735.aspx
-+  int8_t changeStatus = ((USBD_StorageTypeDef *)pdev->pUserData)->IsReady(lun);
-+  if(changeStatus != 0)
-   {
--    SCSI_SenseCode(pdev,
--                   lun,
--                   NOT_READY, 
--                   MEDIUM_NOT_PRESENT);
--    
-+    if (changeStatus == -1)
-+    {
-+      SCSI_SenseCode(pdev,
-+                     lun,
-+                     UNIT_ATTENTION,
-+                     MEDIUM_HAVE_CHANGED);
-+    }
-+    else
-+    {
-+      SCSI_SenseCode(pdev,
-+                     lun,
-+                     NOT_READY,
-+                     MEDIUM_NOT_PRESENT);
-+    }
-+
-     hmsc->bot_state = USBD_BOT_NO_DATA;
-     return -1;
-   } 

USB/STM32_USB_Device_Library/Core/Inc/usbd_def.h

@@ -265,8 +265,8 @@ typedef struct _USBD_HandleTypeDef
 #define  SWAPBYTE(addr)        (((uint16_t)(*((uint8_t *)(addr)))) + \
                                (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8))
 
-#define LOBYTE(x)  ((uint8_t)(x & 0x00FF))
-#define HIBYTE(x)  ((uint8_t)((x & 0xFF00) >>8))
+#define LOBYTE(x)  ((uint8_t)((x) & 0x00FF))
+#define HIBYTE(x)  ((uint8_t)(((x) & 0xFF00) >>8))
 
 #ifndef MIN
 #define MIN(a, b)  (((a) < (b)) ? (a) : (b))

USB/STM32_USB_Device_Library/Core/Inc/usbd_def.h.rej

@@ -1,62 +0,0 @@
---- Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h	(date 1511202099000)
-+++ Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h	(revision )
-@@ -99,6 +99,7 @@
- #define  USB_DESC_TYPE_ENDPOINT                            5
- #define  USB_DESC_TYPE_DEVICE_QUALIFIER                    6
- #define  USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION           7
-+#define  USB_DESC_TYPE_IFACE_ASSOCIATION                   11
- #define  USB_DESC_TYPE_BOS                                 0x0F
- 
- #define USB_CONFIG_REMOTE_WAKEUP                           2
-@@ -147,7 +148,7 @@
- 
- typedef  struct  usb_setup_req 
- {
--    
-+
-     uint8_t   bmRequest;                      
-     uint8_t   bRequest;                           
-     uint16_t  wValue;                             
-@@ -230,7 +231,7 @@
-   uint32_t                dev_config_status; 
-   USBD_SpeedTypeDef       dev_speed; 
-   USBD_EndpointTypeDef    ep_in[15];
--  USBD_EndpointTypeDef    ep_out[15];  
-+  USBD_EndpointTypeDef    ep_out[15];
-   uint32_t                ep0_state;  
-   uint32_t                ep0_data_len;     
-   uint8_t                 dev_state;
-@@ -242,10 +243,14 @@
- 
-   USBD_SetupReqTypedef    request;
-   USBD_DescriptorsTypeDef *pDesc;
--  USBD_ClassTypeDef       *pClass;
--  void                    *pClassData;  
--  void                    *pUserData;    
--  void                    *pData;    
-+  USBD_ClassTypeDef       *pClass; // the composite class
-+  void                    *pClassData;
-+  void                    *pUserData;
-+  void                    *pClassData2; // used for secondary class
-+  void                    *pUserData2; // used for secondary class
-+  void                    *pClassData3; // used for tertiary class
-+  void                    *pUserData3; // used for tertiary class
-+  void                    *pData; // this is a pointer to the low level registers struct
- } USBD_HandleTypeDef;
- 
- /**
-@@ -262,8 +267,14 @@
- 
- #define LOBYTE(x)  ((uint8_t)(x & 0x00FF))
- #define HIBYTE(x)  ((uint8_t)((x & 0xFF00) >>8))
-+
-+#ifndef MIN
- #define MIN(a, b)  (((a) < (b)) ? (a) : (b))
-+#endif
-+
-+#ifndef MAX
- #define MAX(a, b)  (((a) > (b)) ? (a) : (b))
-+#endif
- 
- 
- #if  defined ( __GNUC__ )

USB/usb_device.c

@@ -66,6 +66,7 @@ PCD_HandleTypeDef hpcd_USB_FS;
 /* init function */                                        
 void MX_USB_DEVICE_Init(void)
 {
+  dbg("USB device init ...");
   /* USER CODE BEGIN USB_DEVICE_Init_PreTreatment */
   
   /* USER CODE END USB_DEVICE_Init_PreTreatment */

USB/usbd_cdc_if.c

@@ -314,7 +314,7 @@ void USBD_CDC_TransmitDone(USBD_HandleTypeDef *pdev)
   assert_param(inIRQ());
 
   portBASE_TYPE taskWoken = pdFALSE;
-  assert_param(xSemaphoreGiveFromISR(semVcomTxReadyHandle, &taskWoken) == pdTRUE);
+  assert_param(pdTRUE == xSemaphoreGiveFromISR(semVcomTxReadyHandle, &taskWoken));
   portYIELD_FROM_ISR(taskWoken);
 }
 /* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */

comm/messages.c

@@ -2,6 +2,7 @@
 // Created by MightyPork on 2017/11/21.
 //
 
+#include <platform/status_led.h>
 #include "platform.h"
 #include "framework/settings.h"
 #include "utils/ini_parser.h"
@@ -64,7 +65,7 @@ static void settings_bulkread_cb(BulkRead *bulk, uint32_t chunk, uint8_t *buffer
     if (buffer == NULL) {
         free_ck(bulk);
         iw_end();
-        dbg("INI read complete.");
+//        dbg("INI read complete.");
         return;
     }
 
@@ -80,7 +81,7 @@ static void settings_bulkread_cb(BulkRead *bulk, uint32_t chunk, uint8_t *buffer
  */
 static TF_Result lst_ini_export(TinyFrame *tf, TF_Msg *msg)
 {
-    dbg("Bulk read INI file");
+//    dbg("Bulk read INI file");
 
     BulkRead *bulk = malloc_ck(sizeof(BulkRead));
     assert_param(bulk != NULL);
@@ -91,6 +92,7 @@ static TF_Result lst_ini_export(TinyFrame *tf, TF_Msg *msg)
     bulk->userdata = NULL;
 
     bulkread_start(tf, bulk);
+    Indicator_Effect(STATUS_DISK_BUSY_SHORT);
 
     return TF_STAY;
 }
@@ -112,7 +114,7 @@ static void settings_bulkwrite_cb(BulkWrite *bulk, const uint8_t *chunk, uint32_
 
         if (bulk->offset > 0) {
             settings_load_ini_end();
-            dbg("INI write complete");
+//            dbg("INI write complete");
         } else {
             dbg("INI write failed");
         }
@@ -129,7 +131,7 @@ static void settings_bulkwrite_cb(BulkWrite *bulk, const uint8_t *chunk, uint32_
  */
 static TF_Result lst_ini_import(TinyFrame *tf, TF_Msg *msg)
 {
-    dbg("Bulk write INI file");
+//    dbg("Bulk write INI file");
 
     BulkWrite *bulk = malloc_ck(sizeof(BulkWrite));
     assert_param(bulk);
@@ -152,6 +154,8 @@ static TF_Result lst_ini_import(TinyFrame *tf, TF_Msg *msg)
 
     bulkwrite_start(tf, bulk);
 
+    Indicator_Effect(STATUS_DISK_BUSY);
+
 done:
     return TF_STAY;
 }
@@ -161,6 +165,7 @@ done:
 /** Listener: Save settings to Flash */
 static TF_Result lst_persist_cfg(TinyFrame *tf, TF_Msg *msg)
 {
+    Indicator_Effect(STATUS_DISK_REMOVED);
     settings_save();
     return TF_STAY;
 }

cortex_handlers.c

@@ -13,8 +13,10 @@
 
 void SysTick_Handler(void)
 {
-    GEX_MsTick();
+    // OS first, avoids jitter
     osSystickHandler();
+    // GEX periodic updates
+    GEX_MsTick();
 }
 
 
@@ -34,7 +36,7 @@ void vApplicationStackOverflowHook(TaskHandle_t xTask, signed char *pcTaskName)
 
 // && (__CORTEX_M >= 3)
 #if VERBOSE_HARDFAULT
-void __attribute__((used)) HardFault_DumpRegisters( uint32_t *origStack, uint32_t lr_value)
+void __attribute__((used)) HardFault_DumpRegisters(const uint32_t *origStack, uint32_t lr_value)
 {
 /* These are volatile to try and prevent the compiler/linker optimising them
 away as the variables never actually get used.  If the debugger won't show the

framework/resources.c

@@ -6,6 +6,7 @@
 #include "unit.h"
 #include "resources.h"
 #include "hw_utils.h"
+#include "cfg_utils.h"
 #include "unit_registry.h"
 
 static bool rsc_initialized = false;
@@ -21,10 +22,8 @@ const char *const rsc_names[] = {
 #undef X
 };
 
-// Check that EXTI have higher values than GPIOs in the enum
-// (determines the logic in the name generation code below)
-COMPILER_ASSERT(R_EXTI0 > R_PA0);
-
+COMPILER_ASSERT(R_PF15 < R_EXTI0);
+COMPILER_ASSERT(R_PA0 == 0);
 
 const char * rsc_get_name(Resource rsc)
 {
@@ -34,23 +33,45 @@ const char * rsc_get_name(Resource rsc)
     // we assume the returned value is not stored anywhere
     // and is directly used in a sprintf call, hence a static buffer is OK to use
 
-    if (rsc >= R_EXTI0) {
+    // R_PA0 is 0
+    if (rsc <= R_PF15) {
+        // we assume the returned value is not stored anywhere
+        // and is directly used in a sprintf call.
+        uint8_t index = rsc;
+        SNPRINTF(gpionamebuf, 8, "P%c%d", 'A'+(index/16), index%16);
+        return gpionamebuf;
+    }
+
+    if (rsc >= R_EXTI0 && rsc <= R_EXTI15) {
         uint8_t index = rsc - R_EXTI0;
         SNPRINTF(gpionamebuf, 8, "EXTI%d", index);
         return gpionamebuf;
     }
 
-    if (rsc >= R_PA0) {
-        // we assume the returned value is not stored anywhere
-        // and is directly used in a sprintf call.
-        uint8_t index = rsc - R_PA0;
-        SNPRINTF(gpionamebuf, 8, "P%c%d", 'A'+(index/16), index%16);
-        return gpionamebuf;
+    return rsc_names[rsc - R_EXTI15 - 1];
 }
 
-    return rsc_names[rsc];
+/** Convert a pin to resource handle */
+Resource rsc_portpin2rsc(char port_name, uint8_t pin_number, bool *suc)
+{
+    assert_param(suc != NULL);
+
+    if(port_name < 'A' || port_name >= ('A'+PORTS_COUNT)) {
+        dbg("Bad port: %c", port_name); // TODO proper report
+        *suc = false;
+        return R_NONE;
     }
 
+    if(pin_number > 15) {
+        dbg("Bad pin: %d", pin_number); // TODO proper report
+        *suc = false;
+        return R_NONE;
+    }
+
+    uint8_t num = (uint8_t) (port_name - 'A');
+
+    return R_PA0 + num*16 + pin_number;
+}
 
 const char * rsc_get_owner_name(Resource rsc)
 {
@@ -64,11 +85,12 @@ const char * rsc_get_owner_name(Resource rsc)
 
 void rsc_init_registry(void)
 {
-    for(uint32_t i = 0; i < RSCMAP_LEN; i++) {
-        UNIT_PLATFORM.resources[i] = global_rscmap[i] = 0xFF;
-    }
+    memset(UNIT_PLATFORM.resources, 0xFF, RSCMAP_LEN);
+    memset(global_rscmap, 0xFF, RSCMAP_LEN);
 
     rsc_initialized = true;
+
+    rsc_dbg("Total %d hw resources, bitmap has %d bytes.", RESOURCE_COUNT, RSCMAP_LEN);
 }
 
 
@@ -121,17 +143,11 @@ error_t rsc_claim_range(Unit *unit, Resource rsc0, Resource rsc1)
     return E_SUCCESS;
 }
 
-
 error_t rsc_claim_gpios(Unit *unit, char port_name, uint16_t pins)
 {
-    bool suc = true;
-
     for (int i = 0; i < 16; i++) {
         if (pins & (1 << i)) {
-            Resource rsc = hw_pin2resource(port_name, (uint8_t) i, &suc);
-            if (!suc) return E_BAD_CONFIG;
-
-            TRY(rsc_claim(unit, rsc));
+            TRY(rsc_claim_pin(unit, port_name, (uint8_t)i));
         }
     }
     return E_SUCCESS;
@@ -141,7 +157,7 @@ error_t rsc_claim_gpios(Unit *unit, char port_name, uint16_t pins)
 error_t rsc_claim_pin(Unit *unit, char port_name, uint8_t pin)
 {
     bool suc = true;
-    Resource rsc = hw_pin2resource(port_name, pin, &suc);
+    Resource rsc = rsc_portpin2rsc(port_name, pin, &suc);
     if (!suc) return E_BAD_CONFIG;
     TRY(rsc_claim(unit, rsc));
     return E_SUCCESS;
@@ -222,7 +238,7 @@ void rsc_print_all_available(IniWriter *iw)
 
     uint32_t count0 = (iw->count + iw->skip);
     bool first = true;
-    for (uint32_t rsc = 0; rsc < R_PA0; rsc++) {
+    for (uint32_t rsc = R_EXTI15+1; rsc < R_NONE; rsc++) {
         if (RSC_IS_HELD(scratchmap, (Resource)rsc)) continue;
         if (!first) iw_string(iw, ", ");
 
@@ -242,7 +258,7 @@ void rsc_print_all_available(IniWriter *iw)
         if (i%16 == 0) {
             // here we print the previous port
             if (bitmap != 0) {
-                iw_string(iw, pinmask2str(bitmap, iwbuffer));
+                iw_string(iw, cfg_pinmask_encode(bitmap, iwbuffer, 0));
                 bitmap = 0;
             }
 
@@ -257,7 +273,7 @@ void rsc_print_all_available(IniWriter *iw)
     }
     // the last one
     if (bitmap != 0) {
-        iw_string(iw, pinmask2str(bitmap, iwbuffer));
+        iw_string(iw, cfg_pinmask_encode(bitmap, iwbuffer, 0));
     }
     iw_newline(iw);
     iw_newline(iw);

framework/resources.h

@@ -94,6 +94,16 @@ void rsc_free(Unit *unit, Resource rsc);
  */
 void rsc_free_range(Unit *unit, Resource rsc0, Resource rsc1);
 
+/**
+ * Convert pin name and number to a resource enum
+ *
+ * @param port_name - char 'A'..'Z'
+ * @param pin_number - number 0..15
+ * @param suc - set to false on failure, left unchanged on success
+ * @return the resource, or R_NONE
+ */
+Resource rsc_portpin2rsc(char port_name, uint8_t pin_number, bool *suc);
+
 /**
  * Get name of a resource by the Resource enum.
  * Uses a static buffer, DO NOT store the returned pointer.

framework/rsc_enum.h

@@ -13,6 +13,7 @@
     X(I2C1) X(I2C2) X(I2C3) \
     X(ADC1) X(ADC2) X(ADC3) X(ADC4) \
     X(DAC1) X(DAC2) \
+    X(TSC) \
     X(USART1) X(USART2) X(USART3) X(USART4) X(USART5) X(USART6) \
     X(TIM1) X(TIM2) X(TIM3) X(TIM4) X(TIM5) \
     X(TIM6) X(TIM7) X(TIM8) X(TIM9) X(TIM10) X(TIM11) X(TIM12) X(TIM13) X(TIM14) \
@@ -24,7 +25,6 @@
 // X(I2S1) X(I2S2) X(I2S3)
 // X(OPAMP1) X(OPAMP2) X(OPAMP3) X(OPAMP4)
 // X(CAN1) X(CAN2)
-// X(TSC)
 // X(DCMI)
 // X(ETH)
 // X(FSMC)
@@ -59,9 +59,13 @@ typedef enum hw_resource Resource;
 /** Enum of all resources */
 enum hw_resource {
 #define X(res_name) R_##res_name,
-    XX_RESOURCES
+    // GPIO are at the beginning, because some units use the constants in their config to represent
+    // selected pins and those must not change with adding more stuff to the main list
     XX_RESOURCES_GPIO
+    // EXTIs (same like GPIOs) have dynamically generated labels to save rom space. Must be contiguous.
     XX_RESOURCES_EXTI
+    // All the rest ...
+    XX_RESOURCES
 #undef X
     R_NONE,
     RESOURCE_COUNT = R_NONE,

framework/settings.c

@@ -2,7 +2,6 @@
 // Created by MightyPork on 2017/11/26.
 //
 
-#include "utils/avrlibc.h"
 #include "platform.h"
 #include "utils/hexdump.h"
 #include "settings.h"
@@ -10,6 +9,7 @@
 #include "system_settings.h"
 #include "utils/str_utils.h"
 #include "unit_base.h"
+#include "utils/avrlibc.h"
 
 // pre-declarations
 static void savebuf_flush(PayloadBuilder *pb, bool final);

framework/system_settings.c

@@ -6,6 +6,7 @@
 #include "system_settings.h"
 #include "utils/str_utils.h"
 #include "platform/lock_jumper.h"
+#include "cfg_utils.h"
 
 struct system_settings SystemSettings;
 
@@ -77,12 +78,12 @@ bool systemsettings_load_ini(const char *restrict key, const char *restrict valu
 {
     bool suc = true;
     if (streq(key, "expose_vcom")) {
-        bool yn = str_parse_yn(value, &suc);
+        bool yn = cfg_bool_parse(value, &suc);
         if (suc) SystemSettings.visible_vcom = yn;
     }
 
     if (streq(key, "ini_comments")) {
-        bool yn = str_parse_yn(value, &suc);
+        bool yn = cfg_bool_parse(value, &suc);
         if (suc) SystemSettings.ini_comments = yn;
     }
 

framework/unit_base.h

@@ -8,6 +8,7 @@
 #include "platform.h"
 #include "unit.h"
 #include "hw_utils.h"
+#include "cfg_utils.h"
 #include "resources.h"
 #include "utils/str_utils.h"
 #include "utils/malloc_safe.h"

framework/unit_registry.c

@@ -346,8 +346,9 @@ bool ureg_finalize_all_init(void)
             // try to assign unique callsigns
             if (pUnit->callsign == 0) {
                 // this is very inefficient but should be reliable
-                bool change = false;
+                bool change;
                 do {
+                    change = false;
                     UlistEntry *xli = ulist_head;
                     while (xli != NULL) {
                         if (xli->unit.callsign != 0) {

freertos.c

@@ -147,7 +147,7 @@ void MX_FREERTOS_Init(void) {
   stackmon_register("Main", mainTaskStack, sizeof(mainTaskStack));
   stackmon_register("Job+Msg", msgJobQueTaskStack, sizeof(msgJobQueTaskStack));
   stackmon_register("Idle", xIdleStack, sizeof(xIdleStack));
-  stackmon_register("Timers", xTimersStack, sizeof(xTimersStack));
+//  stackmon_register("Timers", xTimersStack, sizeof(xTimersStack));
   /* USER CODE END Init */
 
   /* Create the mutex(es) */

gex.mk

@@ -15,6 +15,9 @@ GEX_SRC_DIR = \
     User/units/spi \
     User/units/adc \
     User/units/sipo \
+    User/units/fcap \
+    User/units/touch \
+    User/units/simple_pwm \
     User/TinyFrame \
     User/CWPack \
     User/tasks

gex_hooks.c

@@ -43,6 +43,18 @@ void GEX_PreInit(void)
     dbg("\r\n\033[37;1m*** GEX "GEX_VERSION" on "GEX_PLATFORM" ***\033[m");
     dbg("Build "__DATE__" "__TIME__);
 
+    PRINTF("Reset cause:");
+    if (LL_RCC_IsActiveFlag_LPWRRST()) PRINTF(" LPWR");
+    if (LL_RCC_IsActiveFlag_WWDGRST()) PRINTF(" WWDG");
+    if (LL_RCC_IsActiveFlag_IWDGRST()) PRINTF(" IWDG");
+    if (LL_RCC_IsActiveFlag_SFTRST()) PRINTF(" SFT");
+    if (LL_RCC_IsActiveFlag_PORRST()) PRINTF(" POR");
+    if (LL_RCC_IsActiveFlag_PINRST()) PRINTF(" PIN");
+    if (LL_RCC_IsActiveFlag_OBLRST()) PRINTF(" OBL");
+    if (LL_RCC_IsActiveFlag_V18PWRRST()) PRINTF(" V18PWR");
+    PUTNL();
+    LL_RCC_ClearResetFlags();
+
     plat_init();
 
     MX_USB_DEVICE_Init();

platform/cfg_utils.c

@@ -0,0 +1,299 @@
+//
+// Created by MightyPork on 2018/02/23.
+//
+
+#include "cfg_utils.h"
+#include "hw_utils.h"
+#include "utils/avrlibc.h"
+#include "utils/str_utils.h"
+
+/** Parse a string representation of a pin directly to a resource constant */
+Resource cfg_pinrsc_parse(const char *str, bool *suc)
+{
+    char pname;
+    uint8_t pnum;
+
+    if (!cfg_portpin_parse(str, &pname, &pnum)) {
+        *suc = false;
+        return R_NONE;
+    }
+
+    return rsc_portpin2rsc(pname, pnum, suc);
+}
+
+/** Convert a resource to a pin name - uses a static buffer, result must not be stored! */
+char *cfg_pinrsc_encode(Resource rsc)
+{
+    static char buf[4];
+    uint32_t index = rsc - R_PA0;
+    uint32_t portnum = (index/16);
+    uint8_t pinnum = (uint8_t) (index % 16);
+    if (portnum >= PORTS_COUNT) return "";
+    buf[0] = (char) ('A' + portnum);
+    if (pinnum>9) {
+        buf[1] = '1';
+        buf[2] = (char) ('0' + (pinnum - 10));
+        buf[3] = 0;
+    } else {
+        buf[1] = (char) ('0' + pinnum);
+        buf[2] = 0;
+    }
+    return buf;
+}
+
+/** Parse single pin */
+bool cfg_portpin_parse(const char *value, char *targetName, uint8_t *targetNumber)
+{
+    // discard leading 'P'
+    if (value[0] == 'P') {
+        value++;
+    }
+
+    size_t len = strlen(value);
+    if (len<2||len>3) return false;
+
+    *targetName = (uint8_t) value[0];
+    if (!(*targetName >= 'A' && *targetName <= 'H')) return false;
+
+    // lets just hope it's OK
+    *targetNumber = (uint8_t) avr_atoi(value + 1);
+    return true;
+}
+
+/** Parse port name */
+bool cfg_port_parse(const char *value, char *targetName)
+{
+    *targetName = (uint8_t) value[0];
+    if (!(*targetName >= 'A' && *targetName < 'A' + PORTS_COUNT)) return false;
+    return true;
+}
+
+/** Parse a list of pin numbers with ranges and commans/semicolons to a bitmask */
+uint32_t cfg_pinmask_parse_32(const char *value, bool *suc)
+{
+    uint32_t bits = 0;
+    uint32_t acu = 0;
+    bool inrange = false;
+    uint32_t rangestart = 0;
+
+    // shortcut if none are set
+    if (value[0] == 0) return 0;
+
+    char c;
+    do {
+        c = *value++;
+        if (c == ' ' || c == '\t') {
+            // skip
+        }
+        else if (c >= '0' && c <= '9') {
+            acu = acu*10 + (c-'0');
+        }
+        else if (c == ',' || c == ';' || c == 0) {
+            // end of number or range
+            if (!inrange) rangestart = acu;
+
+            // swap them if they're in the wrong order
+            if (acu < rangestart) {
+                uint32_t swp = acu;
+                acu = rangestart;
+                rangestart = swp;
+            }
+
+            if (rangestart > 31) rangestart = 31;
+            if (acu > 31) acu = 31;
+
+            for(uint32_t i=rangestart; i <= acu; i++) {
+                bits |= 1<<i;
+            }
+
+            inrange = false;
+            rangestart = 0;
+            acu = 0;
+        }
+        else if (c == '-' || c == ':') {
+            rangestart = acu;
+            inrange = true;
+            acu=0;
+        } else {
+            *suc = false;
+        }
+    } while (c != 0);
+
+    return bits;
+}
+
+/** Convert a pin bitmask to the ASCII format understood by str_parse_pinmask() */
+char *cfg_pinmask_encode(uint32_t pins, char *buffer, bool ascending)
+{
+    char *b = buffer;
+    uint32_t start = 0;
+    bool on = false;
+    bool first = true;
+    bool bit;
+
+    // shortcut if none are set
+    if (pins == 0) {
+        buffer[0] = 0;
+        return buffer;
+    }
+
+    if (ascending) {
+        for (int32_t i = 0; i <= 32; i++) {
+            if (i == 32) {
+                bit = false;
+            } else {
+                bit = 0 != (pins & 1);
+                pins >>= 1;
+            }
+
+            if (bit) {
+                if (!on) {
+                    start = (uint32_t) i;
+                    on = true;
+                }
+            } else {
+                if (on) {
+                    if (!first) {
+                        b += SPRINTF(b, ", ");
+                    }
+
+                    if (start == (uint32_t)(i - 1)) {
+                        b += SPRINTF(b, "%"PRIu32, start);
+                    } else {
+                        b += SPRINTF(b, "%"PRIu32"-%"PRIu32, start, i - 1);
+                    }
+
+                    first = false;
+                    on = false;
+                }
+            }
+        }
+    } else {
+        for (int32_t i = 31; i >= -1; i--) {
+            if (i == -1) {
+                bit = false;
+            } else {
+                bit = 0 != (pins & 0x80000000);
+                pins <<= 1;
+            }
+
+            if (bit) {
+                if (!on) {
+                    start = (uint32_t) i;
+                    on = true;
+                }
+            } else {
+                if (on) {
+                    if (!first) {
+                        b += SPRINTF(b, ", ");
+                    }
+
+                    if (start == (uint32_t) (i + 1)) {
+                        b += SPRINTF(b, "%"PRIu32, start);
+                    } else {
+                        b += SPRINTF(b, "%"PRIu32"-%"PRIu32, start, i + 1);
+                    }
+
+                    first = false;
+                    on = false;
+                }
+            }
+        }
+    }
+
+    return buffer;
+}
+
+bool cfg_bool_parse(const char *str, bool *suc)
+{
+    // TODO implement strcasecmp without the locale crap from newlib and use it here
+    if (streq(str, "Y")) return true;
+    if (streq(str, "N")) return false;
+
+    if (streq(str, "1")) return true;
+    if (streq(str, "0")) return false;
+
+    if (streq(str, "H")) return true;
+    if (streq(str, "L")) return false;
+
+    if (streq(str, "YES")) return true;
+    if (streq(str, "NO")) return false;
+
+    if (streq(str, "ON")) return true;
+    if (streq(str, "OFF")) return false;
+
+    *suc = false;
+    return false;
+}
+
+/** Convert number to one of 2 options */
+const char *cfg_enum2_encode(uint32_t n,
+                             uint32_t na, const char *a,
+                             uint32_t nb, const char *b)
+{
+    if (n == nb) return b;
+    return a;
+}
+
+/** Convert number to one of 3 options */
+const char *cfg_enum3_encode(uint32_t n,
+                             uint32_t na, const char *a,
+                             uint32_t nb, const char *b,
+                             uint32_t nc, const char *c)
+{
+    if (n == nb) return b;
+    if (n == nc) return c;
+    return a;
+}
+
+/** Convert number to one of 4 options */
+const char *cfg_enum4_encode(uint32_t n,
+                             uint32_t na, const char *a,
+                             uint32_t nb, const char *b,
+                             uint32_t nc, const char *c,
+                             uint32_t nd, const char *d)
+{
+    if (n == nb) return b;
+    if (n == nc) return c;
+    if (n == nd) return d;
+    return a;
+}
+
+uint32_t cfg_enum2_parse(const char *value,
+                         const char *a, uint32_t na,
+                         const char *b, uint32_t nb,
+                         bool *suc)
+{
+    if (streq(value, a)) return na;
+    if (streq(value, b)) return nb;
+    *suc = false;
+    return na;
+}
+
+uint32_t cfg_enum3_parse(const char *value,
+                         const char *a, uint32_t na,
+                         const char *b, uint32_t nb,
+                         const char *c, uint32_t nc,
+                         bool *suc)
+{
+    if (streq(value, a)) return na;
+    if (streq(value, b)) return nb;
+    if (streq(value, c)) return nc;
+    *suc = false;
+    return na;
+}
+
+uint32_t cfg_enum4_parse(const char *value,
+                         const char *a, uint32_t na,
+                         const char *b, uint32_t nb,
+                         const char *c, uint32_t nc,
+                         const char *d, uint32_t nd,
+                         bool *suc)
+{
+    if (streq(value, a)) return na;
+    if (streq(value, b)) return nb;
+    if (streq(value, c)) return nc;
+    if (streq(value, d)) return nd;
+    *suc = false;
+    return na;
+}

platform/cfg_utils.h

@@ -0,0 +1,153 @@
+//
+// Created by MightyPork on 2018/02/23.
+//
+
+#ifndef GEX_F072_CFG_UTILS_H
+#define GEX_F072_CFG_UTILS_H
+
+#include "platform.h"
+#include "rsc_enum.h"
+#include "utils/avrlibc.h"
+
+/**
+ * Parse a pin name (e.g. PA0 or A0) to port name and pin number
+ *
+ * @param str - source string
+ * @param targetName - output: port name (one character)
+ * @param targetNumber - output: pin number 0-15
+ * @return success
+ */
+bool cfg_portpin_parse(const char *str, char *targetName, uint8_t *targetNumber);
+
+/**
+ * Parse a string representation of a pin directly to a resource constant
+ *
+ * @param[in]  str - source string - e.g. PA0 or A0
+ * @param[out] suc - written to false on failure
+ * @return the parsed resource
+ */
+Resource cfg_pinrsc_parse(const char *str, bool *suc);
+
+/**
+ * Convert a resource to a pin name - uses a static buffer, result must not be stored!
+ *
+ * @param[in] rsc - resource to print
+ * @return a pointer to a static buffer used for exporting the names
+ */
+char *cfg_pinrsc_encode(Resource rsc);
+
+/**
+ * Parse a port name (one character) - validates that it's within range
+ *
+ * @param value - source string
+ * @param targetName - output: port name (one character)
+ * @return success
+ */
+bool cfg_port_parse(const char *value, char *targetName);
+
+/**
+ * Parse a list of pin numbers with ranges and commands/semicolons to a bitmask.
+ * Supported syntax:
+ * - comma separated numbers
+ * - numbers connected by dash or colon form a range (can be in any order)
+ *
+ * @param value - source string
+ * @param suc - set to False if parsing failed
+ * @return the resulting bitmap
+ */
+uint32_t cfg_pinmask_parse_32(const char *value, bool *suc);
+
+/** same as cfg_pinmask_parse_32(), but with a cast to u16 */
+static inline uint16_t cfg_pinmask_parse(const char *value, bool *suc)
+{
+    return (uint16_t) cfg_pinmask_parse_32(value, suc);
+}
+
+/**
+ * Convert a pin bitmap to the ASCII format understood by str_parse_pinmask()
+ *
+ * @param[in]  pins - sparse pin map
+ * @param[out] buffer - output string buffer
+ * @param[in]  ascending - use ordering 0..31 rather than 31..0
+ * @return the output buffer
+ */
+char *cfg_pinmask_encode(uint32_t pins, char *buffer, bool ascending);
+
+
+/** Parse Y/N to bool */
+bool cfg_bool_parse(const char *str, bool *suc);
+
+/** Convert number to one of 4 options */
+const char *cfg_enum2_encode(uint32_t n,
+                             uint32_t na, const char *a,
+                             uint32_t nb, const char *b);
+
+/** Convert number to one of 4 options */
+const char *cfg_enum3_encode(uint32_t n,
+                             uint32_t na, const char *a,
+                             uint32_t nb, const char *b,
+                             uint32_t nc, const char *c);
+
+/** Convert number to one of 4 options */
+const char *cfg_enum4_encode(uint32_t n,
+                             uint32_t na, const char *a,
+                             uint32_t nb, const char *b,
+                             uint32_t nc, const char *c,
+                             uint32_t nd, const char *d);
+
+/** Convert string to one of two numeric options */
+uint32_t cfg_enum2_parse(const char *tpl,
+                         const char *a, uint32_t na,
+                         const char *b, uint32_t nb,
+                         bool *suc);
+
+/** Convert string to one of three numeric options */
+uint32_t cfg_enum3_parse(const char *tpl,
+                         const char *a, uint32_t na,
+                         const char *b, uint32_t nb,
+                         const char *c, uint32_t nc,
+                         bool *suc);
+
+/** Convert string to one of four numeric options */
+uint32_t cfg_enum4_parse(const char *tpl,
+                         const char *a, uint32_t na,
+                         const char *b, uint32_t nb,
+                         const char *c, uint32_t nc,
+                         const char *d, uint32_t nd,
+                         bool *suc);
+
+/** Convert bool to a Y or N constant string */
+#define str_yn(cond) ((cond) ? ("Y") : ("N"))
+
+
+static inline uint8_t cfg_u8_parse(const char *value, bool *suc)
+{
+    return (uint8_t) avr_atoi(value);
+}
+
+static inline int8_t cfg_i8_parse(const char *value, bool *suc)
+{
+    return (int8_t) avr_atoi(value);
+}
+
+static inline uint16_t cfg_u16_parse(const char *value, bool *suc)
+{
+    return (uint16_t) avr_atoi(value);
+}
+
+static inline int16_t cfg_i16_parse(const char *value, bool *suc)
+{
+    return (int16_t) avr_atoi(value);
+}
+
+static inline uint32_t cfg_u32_parse(const char *value, bool *suc)
+{
+    return (uint32_t) avr_atoi(value);
+}
+
+static inline int32_t cfg_i32_parse(const char *value, bool *suc)
+{
+    return (int32_t) avr_atoi(value);
+}
+
+#endif //GEX_F072_CFG_UTILS_H

platform/hw_utils.c

@@ -3,10 +3,8 @@
 //
 
 #include "platform.h"
-#include "utils/avrlibc.h"
 #include "hw_utils.h"
 
-
 /** Convert pin number to LL bitfield */
 uint32_t hw_pin2ll(uint8_t pin_number, bool *suc)
 {
@@ -36,210 +34,19 @@ GPIO_TypeDef *hw_port2periph(char port_name, bool *suc)
     return GPIO_PERIPHS[num];
 }
 
-/** Convert a pin to resource handle */
-Resource hw_pin2resource(char port_name, uint8_t pin_number, bool *suc)
+/** Convert a pin resource to it's LL lib values */
+bool hw_pinrsc2ll(Resource rsc, GPIO_TypeDef **port, uint32_t *llpin)
 {
-    assert_param(suc != NULL);
-
-    if(port_name < 'A' || port_name >= ('A'+PORTS_COUNT)) {
-        dbg("Bad port: %c", port_name); // TODO proper report
-        *suc = false;
-        return R_NONE;
-    }
-
-    if(pin_number > 15) {
-        dbg("Bad pin: %d", pin_number); // TODO proper report
-        *suc = false;
-        return R_NONE;
-    }
-
-    uint8_t num = (uint8_t) (port_name - 'A');
-
-    return R_PA0 + num*16 + pin_number;
-}
-
-/** Parse single pin */
-bool parse_pin(const char *value, char *targetName, uint8_t *targetNumber)
-{
-    // discard leading 'P'
-    if (value[0] == 'P') {
-        value++;
-    }
-
-    size_t len = strlen(value);
-    if (len<2||len>3) return false;
-
-    *targetName = (uint8_t) value[0];
-    if (!(*targetName >= 'A' && *targetName <= 'H')) return false;
-
-    // lets just hope it's OK
-    *targetNumber = (uint8_t) avr_atoi(value + 1);
+    if (rsc > R_PF15) return false;
+    uint32_t index = rsc - R_PA0;
+    uint32_t pname = (index/16);
+    uint8_t pnum = (uint8_t) (index % 16);
+    if (pname >= PORTS_COUNT) return false;
+    *port = GPIO_PERIPHS[pname];
+    *llpin = LL_GPIO_PINS[pnum];
     return true;
 }
 
-/** Parse port name */
-bool parse_port_name(const char *value, char *targetName)
-{
-    *targetName = (uint8_t) value[0];
-    if (!(*targetName >= 'A' && *targetName < 'A' + PORTS_COUNT)) return false;
-    return true;
-}
-
-/** Parse a list of pin numbers with ranges and commans/semicolons to a bitmask */
-uint32_t parse_pinmask(const char *value, bool *suc)
-{
-    uint32_t bits = 0;
-    uint32_t acu = 0;
-    bool inrange = false;
-    uint32_t rangestart = 0;
-
-    // shortcut if none are set
-    if (value[0] == 0) return 0;
-
-    char c;
-    do {
-        c = *value++;
-        if (c == ' ' || c == '\t') {
-            // skip
-        }
-        else if (c >= '0' && c <= '9') {
-            acu = acu*10 + (c-'0');
-        }
-        else if (c == ',' || c == ';' || c == 0) {
-            // end of number or range
-            if (!inrange) rangestart = acu;
-
-            // swap them if they're in the wrong order
-            if (acu < rangestart) {
-                uint32_t swp = acu;
-                acu = rangestart;
-                rangestart = swp;
-            }
-
-            if (rangestart > 31) rangestart = 31;
-            if (acu > 31) acu = 31;
-
-            for(uint32_t i=rangestart; i <= acu; i++) {
-                bits |= 1<<i;
-            }
-
-            inrange = false;
-            rangestart = 0;
-            acu = 0;
-        }
-        else if (c == '-' || c == ':') {
-            rangestart = acu;
-            inrange = true;
-            acu=0;
-        } else {
-            *suc = false;
-        }
-    } while (c != 0);
-
-    return bits;
-}
-
-/** Convert a pin bitmask to the ASCII format understood by str_parse_pinmask() */
-char * pinmask2str(uint32_t pins, char *buffer)
-{
-    char *b = buffer;
-    uint32_t start = 0;
-    bool on = false;
-    bool first = true;
-
-    // shortcut if none are set
-    if (pins == 0) {
-        buffer[0] = 0;
-        return buffer;
-    }
-
-    for (int32_t i = 31; i >= -1; i--) {
-        bool bit;
-
-        if (i == -1) {
-            bit = false;
-        } else {
-            bit = 0 != (pins & 0x80000000);
-            pins <<= 1;
-        }
-
-        if (bit) {
-            if (!on) {
-                start = (uint32_t) i;
-                on = true;
-            }
-        } else {
-            if (on) {
-                if (!first) {
-                    b += SPRINTF(b, ", ");
-                }
-
-                if (start == (uint32_t)(i+1)) {
-                    b += SPRINTF(b, "%"PRIu32, start);
-                }
-                else {
-                    b += SPRINTF(b, "%"PRIu32"-%"PRIu32, start, i + 1);
-                }
-
-                first = false;
-                on = false;
-            }
-        }
-    }
-
-    return buffer;
-}
-
-char * pinmask2str_up(uint32_t pins, char *buffer)
-{
-    char *b = buffer;
-    uint32_t start = 0;
-    bool on = false;
-    bool first = true;
-
-    // shortcut if none are set
-    if (pins == 0) {
-        buffer[0] = 0;
-        return buffer;
-    }
-
-    for (int32_t i = 0; i <= 32; i++) {
-        bool bit;
-
-        if (i == 32) {
-            bit = false;
-        } else {
-            bit = 0 != (pins & 1);
-            pins >>= 1;
-        }
-
-        if (bit) {
-            if (!on) {
-                start = (uint32_t) i;
-                on = true;
-            }
-        } else {
-            if (on) {
-                if (!first) {
-                    b += SPRINTF(b, ", ");
-                }
-
-                if (start == (uint32_t)(i-1)) {
-                    b += SPRINTF(b, "%"PRIu32, start);
-                }
-                else {
-                    b += SPRINTF(b, "%"PRIu32"-%"PRIu32, start, i - 1);
-                }
-
-                first = false;
-                on = false;
-            }
-        }
-    }
-
-    return buffer;
-}
-
 #pragma GCC push_options
 #pragma GCC optimize ("O2")
 /** spread a packed pinfield using a mask */
@@ -285,25 +92,13 @@ uint32_t pinmask_pack_32(uint32_t spread, uint32_t mask)
     return result;
 }
 
-/** Convert spread port pin number to a packed index using a mask */
-uint8_t pinmask_translate(uint32_t mask, uint8_t index)
-{
-    int cnt = 0;
-    for (int i = 0; i<32; i++) {
-        if (mask & (1<<i)) {
-            if (i == index) return (uint8_t) cnt;
-            cnt++;
-        }
-    }
-    return 0;
-}
 #pragma GCC pop_options
 
 /** Configure unit pins as analog (part of unit teardown) */
 void hw_deinit_unit_pins(Unit *unit)
 {
     for (uint32_t rsc = R_PA0; rsc <= R_PF15; rsc++) {
-        if (RSC_IS_HELD(unit->resources, rsc)) {
+        if (RSC_IS_HELD(unit->resources, (Resource)rsc)) {
             rsc_dbg("Freeing pin %s", rsc_get_name((Resource)rsc));
             GPIO_TypeDef *port = GPIO_PERIPHS[(rsc-R_PA0) / 16];
             uint32_t ll_pin = LL_GPIO_PINS[(rsc-R_PA0)%16];
@@ -335,6 +130,30 @@ error_t hw_configure_gpio_af(char port_name, uint8_t pin_num, uint32_t ll_af)
     return E_SUCCESS;
 }
 
+/** Configure a pin to alternate function */
+error_t hw_configure_gpiorsc_af(Resource rsc, uint32_t ll_af)
+{
+#if PLAT_NO_AFNUM
+    trap("Illegal call to hw_configure_gpio_af() on this platform");
+#else
+
+    bool suc = true;
+    GPIO_TypeDef *port;
+    uint32_t ll_pin;
+    suc = hw_pinrsc2ll(rsc, &port, &ll_pin);
+    if (!suc) return E_BAD_CONFIG;
+
+    if (ll_pin & 0xFF)
+        LL_GPIO_SetAFPin_0_7(port, ll_pin, ll_af);
+    else
+        LL_GPIO_SetAFPin_8_15(port, ll_pin, ll_af);
+
+    LL_GPIO_SetPinMode(port, ll_pin, LL_GPIO_MODE_ALTERNATE);
+
+#endif
+    return E_SUCCESS;
+}
+
 /** Configure pins using sparse map */
 error_t hw_configure_sparse_pins(char port_name, uint16_t mask, GPIO_TypeDef **port_dest,
                                  uint32_t ll_mode, uint32_t ll_otype)
@@ -360,7 +179,7 @@ error_t hw_configure_sparse_pins(char port_name, uint16_t mask, GPIO_TypeDef **p
 }
 
 /** Solve a timer/counter's count and prescaller value */
-bool solve_timer(uint32_t base_freq, uint32_t required_freq, bool is16bit,
+bool hw_solve_timer(uint32_t base_freq, uint32_t required_freq, bool is16bit,
                     uint16_t *presc, uint32_t *count, float *real_freq)
 {
     if (required_freq == 0) return false;
@@ -394,7 +213,6 @@ bool solve_timer(uint32_t base_freq, uint32_t required_freq, bool is16bit,
     return true;
 }
 
-
 void hw_periph_clock_enable(void *periph)
 {
     // GPIOs are enabled by default on start-up
@@ -493,6 +311,12 @@ void hw_periph_clock_enable(void *periph)
 #ifdef DAC2
     else if (periph == DAC2) __HAL_RCC_DAC2_CLK_ENABLE();
 #endif
+
+        // --- TSC ---
+#ifdef TSC
+    else if (periph == TSC) __HAL_RCC_TSC_CLK_ENABLE();
+#endif
+
     else {
         dbg("Periph 0x%p missing in hw clock enable func", periph);
         trap("BUG");
@@ -598,6 +422,12 @@ void hw_periph_clock_disable(void *periph)
 #ifdef DAC2
         else if (periph == DAC2) __HAL_RCC_DAC2_CLK_DISABLE();
 #endif
+
+        // --- TSC ---
+#ifdef TSC
+    else if (periph == TSC) __HAL_RCC_TSC_CLK_DISABLE();
+#endif
+
     else {
         dbg("Periph 0x%p missing in hw clock disable func", periph);
         trap("BUG");

platform/hw_utils.h

@@ -21,16 +21,6 @@
  */
 uint32_t hw_pin2ll(uint8_t pin_number, bool *suc);
 
-/**
- * Convert pin name and number to a resource enum
- *
- * @param port_name - char 'A'..'Z'
- * @param pin_number - number 0..15
- * @param suc - set to false on failure, left unchanged on success
- * @return the resource, or R_NONE
- */
-Resource hw_pin2resource(char port_name, uint8_t pin_number, bool *suc);
-
 /**
  * Convert port name to peripheral instance
  *
@@ -41,55 +31,14 @@ Resource hw_pin2resource(char port_name, uint8_t pin_number, bool *suc);
 GPIO_TypeDef *hw_port2periph(char port_name, bool *suc);
 
 /**
- * Parse a pin name (e.g. PA0 or A0) to port name and pin number
+ * Convert a pin resource to it's LL lib values
  *
- * @param str - source string
- * @param targetName - output: port name (one character)
- * @param targetNumber - output: pin number 0-15
+ * @param[in]  rsc - resource to process
+ * @param[out] port - output port
+ * @param[out] llpin - output LL pin mask
  * @return success
  */
-bool parse_pin(const char *str, char *targetName, uint8_t *targetNumber);
-
-/**
- * Parse a port name (one character) - validates that it's within range
- *
- * @param value - source string
- * @param targetName - output: port name (one character)
- * @return success
- */
-bool parse_port_name(const char *value, char *targetName);
-
-/**
- * Parse a list of pin numbers with ranges and commands/semicolons to a bitmask.
- * Supported syntax:
- * - comma separated numbers
- * - numbers connected by dash or colon form a range (can be in any order)
- *
- * @param value - source string
- * @param suc - set to False if parsing failed
- * @return the resulting bitmap
- */
-uint32_t parse_pinmask(const char *value, bool *suc);
-
-/**
- * Convert a pin bitmap to the ASCII format understood by str_parse_pinmask()
- * This is the downto variant (15..0)
- *
- * @param pins - sparse pin map
- * @param buffer - output string buffer
- * @return the output buffer
- */
-char * pinmask2str(uint32_t pins, char *buffer);
-
-/**
- * Convert a pin bitmap to the ASCII format understood by str_parse_pinmask()
- * This is the ascending variant (0..15)
- *
- * @param pins - sparse pin map
- * @param buffer - output string buffer
- * @return the output buffer
- */
-char * pinmask2str_up(uint32_t pins, char *buffer);
+bool hw_pinrsc2ll(Resource rsc, GPIO_TypeDef **port, uint32_t *llpin) __attribute__((warn_unused_result));
 
 /**
  * Spread packed port pins using a mask
@@ -121,13 +70,6 @@ static inline uint16_t pinmask_pack(uint32_t spread, uint32_t mask)
     return (uint16_t) pinmask_pack_32(spread, mask);
 }
 
-/**
- * Convert spread port pin number to a packed index using a mask
- *
- * eg. with a mask 0b1010 and index 3, the result is 1 (bit 1 of the packed - 0bX0)
- */
-uint8_t pinmask_translate(uint32_t mask, uint8_t index);
-
 /**
  * Set all GPIO resources held by unit to analog.
  * This is a part of unit teardown.
@@ -146,6 +88,9 @@ void hw_deinit_unit_pins(Unit *unit);
  */
 error_t hw_configure_gpio_af(char port_name, uint8_t pin_num, uint32_t ll_af) __attribute__((warn_unused_result));
 
+/** Configure a pin to alternate function via rsc */
+error_t hw_configure_gpiorsc_af(Resource rsc, uint32_t ll_af) __attribute__((warn_unused_result));
+
 /**
  * Configure multiple pins using the bitmap pattern
  *
@@ -192,8 +137,8 @@ void hw_periph_clock_disable(void *periph);
  * @param[out] real_freq - field for storing the computed real frequency
  * @return true on success
  */
-bool solve_timer(uint32_t base_freq, uint32_t required_freq, bool is16bit,
-                 uint16_t *presc, uint32_t *count, float *real_freq);
+bool hw_solve_timer(uint32_t base_freq, uint32_t required_freq, bool is16bit,
+                    uint16_t *presc, uint32_t *count, float *real_freq) __attribute__((warn_unused_result));
 
 #define hw_wait_while(call, timeout) \
     do { \

platform/irq_dispatcher.c

@@ -61,11 +61,15 @@ static struct callbacks_ {
     struct cbslot dma2_7;
     struct cbslot dma2_8;
 
+    struct cbslot tim2;
     struct cbslot tim6;
     struct cbslot tim7;
+    struct cbslot tim14;
     struct cbslot tim15;
+    struct cbslot tim16;
 
     struct cbslot adc1;
+    struct cbslot tsc;
 
     // XXX add more callbacks here when needed
 } callbacks;
@@ -89,7 +93,8 @@ void irqd_init(void)
     HAL_NVIC_SetPriority(EXTI2_3_IRQn, 2, 0);
     HAL_NVIC_SetPriority(EXTI4_15_IRQn, 2, 0);
 
-//    NVIC_EnableIRQ(TSC_IRQn);                   /*!< Touch Sensing Controller Interrupts                             */
+    NVIC_EnableIRQ(TSC_IRQn);                   /*!< Touch Sensing Controller Interrupts                             */
+    HAL_NVIC_SetPriority(TSC_IRQn, 2, 0);
 
     NVIC_EnableIRQ(DMA1_Channel1_IRQn);         /*!< DMA1 Channel 1 Interrupt                                        */
     NVIC_EnableIRQ(DMA1_Channel2_3_IRQn);       /*!< DMA1 Channel 2 and Channel 3 Interrupt                          */
@@ -102,24 +107,32 @@ void irqd_init(void)
     HAL_NVIC_SetPriority(ADC1_COMP_IRQn, 1, 0); // ADC group completion - higher prio than DMA to let it handle the last halfword first
 
 //    NVIC_EnableIRQ(TIM1_IRQn);                  /*!< TIM1 global Interrupt                                          */
-//    NVIC_EnableIRQ(TIM2_IRQn);                  /*!< TIM2 global Interrupt                                           */
+    NVIC_EnableIRQ(TIM2_IRQn);                  /*!< TIM2 global Interrupt                                           */
+    HAL_NVIC_SetPriority(TIM2_IRQn, 2, 0); // Used by FCAP
+
 //    NVIC_EnableIRQ(TIM3_IRQn);                  /*!< TIM3 global Interrupt                                           */
 
     NVIC_EnableIRQ(TIM6_DAC_IRQn);              /*!< TIM6 global and DAC channel underrun error Interrupt            */
     HAL_NVIC_SetPriority(TIM7_IRQn, 2, 0); // Used for DAC timing
 
     NVIC_EnableIRQ(TIM7_IRQn);                  /*!< TIM7 global Interrupt                                           */
-    HAL_NVIC_SetPriority(TIM7_IRQn, 2, 0);
+    HAL_NVIC_SetPriority(TIM7_IRQn, 2, 0);// this will be for dac (?)
 
-    /* Tim14 is used for HAL timebase, because SysTick is used to time FreeRTOS and has the lowest priority. */
-    /* Tim14's priority is set to 0 in the init routine, which runs early in the startup sequence */
-    //  NVIC_EnableIRQ(TIM14_IRQn); /*!< TIM14 global Interrupt */
+    NVIC_EnableIRQ(TIM14_IRQn); /*used by fcap as a time reference for direct capture */ /*!< TIM14 global Interrupt */
+    HAL_NVIC_SetPriority(TIM14_IRQn, 2, 0);
 
     NVIC_EnableIRQ(TIM15_IRQn);                 /*!< TIM15 global Interrupt                                          */
-    HAL_NVIC_SetPriority(TIM15_IRQn, 2, 0);
+    HAL_NVIC_SetPriority(TIM15_IRQn, 2, 0); // Used by ADC
 
-//    NVIC_EnableIRQ(TIM16_IRQn);                 /*!< TIM16 global Interrupt                                          */
+    NVIC_EnableIRQ(TIM16_IRQn);                  /*!< TIM16 global Interrupt                                          */
+    HAL_NVIC_SetPriority(TIM16_IRQn, 2, 0);
+
+
+    /* Tim17 is used for HAL timebase, because SysTick is used to time FreeRTOS and has the lowest priority. */
+    /* Tim17's priority is set to 0 in the init routine, which runs early in the startup sequence */
 //    NVIC_EnableIRQ(TIM17_IRQn);                 /*!< TIM17 global Interrupt                                          */
+
+
 //    NVIC_EnableIRQ(I2C1_IRQn);                  /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup)      */
 //    NVIC_EnableIRQ(I2C2_IRQn);                  /*!< I2C2 Event Interrupt                                            */
 //    NVIC_EnableIRQ(SPI1_IRQn);                  /*!< SPI1 global Interrupt                                           */
@@ -159,9 +172,15 @@ static struct cbslot *get_slot_for_periph(void *periph)
         else if (periph == USART5) slot = &callbacks.usart5;
 #endif
 
+    else if (periph == TIM2) slot = &callbacks.tim2;
     else if (periph == TIM6) slot = &callbacks.tim6;
     else if (periph == TIM7) slot = &callbacks.tim7;
+    else if (periph == TIM14) slot = &callbacks.tim14;
     else if (periph == TIM15) slot = &callbacks.tim15;
+    else if (periph == TIM16) slot = &callbacks.tim16;
+    // 17 - used by timebase
+
+    else if (periph == TSC) slot = &callbacks.tsc;
 
     else if (periph == ADC1) slot = &callbacks.adc1;
 
@@ -302,7 +321,10 @@ void EXTI4_15_IRQHandler(void)
 
 // ------------ INTERRUPTS -------------
 
-// TIM14 is used to generate HAL timebase and its handler is in the file "timebase.c"
+void TIM2_IRQHandler(void)
+{
+    CALL_IRQ_HANDLER(callbacks.tim2);
+}
 
 void TIM6_DAC_IRQHandler(void)
 {
@@ -314,16 +336,31 @@ void TIM7_IRQHandler(void)
     CALL_IRQ_HANDLER(callbacks.tim7);
 }
 
+void TIM14_IRQHandler(void)
+{
+    CALL_IRQ_HANDLER(callbacks.tim14);
+}
+
 void TIM15_IRQHandler(void)
 {
     CALL_IRQ_HANDLER(callbacks.tim15);
 }
 
+void TIM16_IRQHandler(void)
+{
+    CALL_IRQ_HANDLER(callbacks.tim16);
+}
+
 void ADC1_COMP_IRQHandler(void)
 {
     CALL_IRQ_HANDLER(callbacks.adc1);
 }
 
+void TSC_IRQHandler(void)
+{
+    CALL_IRQ_HANDLER(callbacks.tsc);
+}
+
 
 // other ISRs...
 

platform/ll_extension.c

@@ -5,6 +5,44 @@
 #include "platform.h"
 #include "ll_extension.h"
 
+const uint32_t LL_TIM_IC_FILTERS[] = {
+    LL_TIM_IC_FILTER_FDIV1,
+    LL_TIM_IC_FILTER_FDIV1_N2,
+    LL_TIM_IC_FILTER_FDIV1_N4,
+    LL_TIM_IC_FILTER_FDIV1_N8,
+    LL_TIM_IC_FILTER_FDIV2_N6,
+    LL_TIM_IC_FILTER_FDIV2_N8,
+    LL_TIM_IC_FILTER_FDIV4_N6,
+    LL_TIM_IC_FILTER_FDIV4_N8,
+    LL_TIM_IC_FILTER_FDIV8_N6,
+    LL_TIM_IC_FILTER_FDIV8_N8,
+    LL_TIM_IC_FILTER_FDIV16_N5,
+    LL_TIM_IC_FILTER_FDIV16_N6,
+    LL_TIM_IC_FILTER_FDIV16_N8,
+    LL_TIM_IC_FILTER_FDIV32_N5,
+    LL_TIM_IC_FILTER_FDIV32_N6,
+    LL_TIM_IC_FILTER_FDIV32_N8,
+};
+
+const uint32_t LL_TIM_ETR_FILTERS[] = {
+    LL_TIM_ETR_FILTER_FDIV1,
+    LL_TIM_ETR_FILTER_FDIV1_N2,
+    LL_TIM_ETR_FILTER_FDIV1_N4,
+    LL_TIM_ETR_FILTER_FDIV1_N8,
+    LL_TIM_ETR_FILTER_FDIV2_N6,
+    LL_TIM_ETR_FILTER_FDIV2_N8,
+    LL_TIM_ETR_FILTER_FDIV4_N6,
+    LL_TIM_ETR_FILTER_FDIV4_N8,
+    LL_TIM_ETR_FILTER_FDIV8_N6,
+    LL_TIM_ETR_FILTER_FDIV8_N8,
+    LL_TIM_ETR_FILTER_FDIV16_N5,
+    LL_TIM_ETR_FILTER_FDIV16_N6,
+    LL_TIM_ETR_FILTER_FDIV16_N8,
+    LL_TIM_ETR_FILTER_FDIV32_N5,
+    LL_TIM_ETR_FILTER_FDIV32_N6,
+    LL_TIM_ETR_FILTER_FDIV32_N8,
+};
+
 const uint32_t LL_SYSCFG_EXTI_PORTS[PORTS_COUNT] = {
     LL_SYSCFG_EXTI_PORTA,
     LL_SYSCFG_EXTI_PORTB,

platform/ll_extension.h

@@ -13,7 +13,8 @@ extern GPIO_TypeDef * const GPIO_PERIPHS[PORTS_COUNT];
 extern const uint32_t LL_GPIO_PINS[16];
 extern const uint32_t LL_EXTI_LINES[16];
 extern const uint32_t LL_ADC_SAMPLETIMES[8];
-
+extern const uint32_t LL_TIM_IC_FILTERS[16];
+extern const uint32_t LL_TIM_ETR_FILTERS[16];
 
 static inline bool LL_DMA_IsActiveFlag_G(uint32_t isr_snapshot, uint8_t channel)
 {

platform/lock_jumper.c

@@ -26,16 +26,11 @@ void LockJumper_Init(void)
 {
     bool suc = true;
 
-    // Resolve and claim resource
-    Resource rsc = hw_pin2resource(LOCK_JUMPER_PORT, LOCK_JUMPER_PIN, &suc);
+    Resource pinrsc = rsc_portpin2rsc(LOCK_JUMPER_PORT, LOCK_JUMPER_PIN, &suc);
     assert_param(suc);
 
-    assert_param(E_SUCCESS == rsc_claim(&UNIT_SYSTEM, rsc));
-
-    // Resolve pin
-    lock_periph = hw_port2periph(LOCK_JUMPER_PORT, &suc);
-    lock_llpin = hw_pin2ll(LOCK_JUMPER_PIN, &suc);
-    assert_param(suc);
+    assert_param(E_SUCCESS == rsc_claim(&UNIT_SYSTEM, pinrsc));
+    assert_param(hw_pinrsc2ll(pinrsc, &lock_periph, &lock_llpin));
 
     // Configure for input
     LL_GPIO_SetPinMode(lock_periph, lock_llpin, LL_GPIO_MODE_INPUT);

platform/plat_compat.h

@@ -21,7 +21,7 @@
 #endif
 
 // 180 is normally enough if not doing extensive debug logging
-#define TSK_STACK_MSG       200 // TF message handler task stack size (all unit commands run on this thread)
+#define TSK_STACK_MSG       220 // TF message handler task stack size (all unit commands run on this thread)
 #define TSK_STACK_IDLE    64 //configMINIMAL_STACK_SIZE
 #define TSK_STACK_TIMERS  64 //configTIMER_TASK_STACK_DEPTH
 
@@ -30,7 +30,7 @@
 
 
 #define BULK_READ_BUF_LEN 256   // Buffer for TF bulk reads
-#define UNIT_TMP_LEN      512   // Buffer for internal unit operations
+#define UNIT_TMP_LEN      256   // Buffer for internal unit operations
 
 #define FLASH_SAVE_BUF_LEN  128 // Malloc'd buffer for saving to flash
 
@@ -38,7 +38,7 @@
 #define RX_QUE_CAPACITY    16 // TinyFrame rx queue size (64 bytes each)
 
 #define TF_MAX_PAYLOAD_RX 512 // TF max Rx payload
-#define TF_SENDBUF_LEN     64 // TF transmit buffer (can be less than a full frame)
+#define TF_SENDBUF_LEN    512 // TF transmit buffer (can be less than a full frame)
 
 #define TF_MAX_ID_LST   4 // Frame ID listener count
 #define TF_MAX_TYPE_LST 6 // Frame Type listener count
@@ -51,7 +51,7 @@
 #define INI_VALUE_MAX  30 // Ini parser value buffer
 
 // -------- Stack buffers ----------
-#define DBG_BUF_LEN      80 // Size of the snprintf buffer for debug messages
+#define DBG_BUF_LEN      100 // Size of the snprintf buffer for debug messages
 #define ERR_MSG_STR_LEN  64 // Error message buffer size
 #define IWBUFFER_LEN     80 // Ini writer buffer for sprintf
 

platform/plat_init.c

@@ -15,6 +15,7 @@
 #include "debug_uart.h"
 #include "irq_dispatcher.h"
 #include "timebase.h"
+#include "watchdog.h"
 
 void plat_init(void)
 {
@@ -39,4 +40,6 @@ void plat_init(void)
     settings_load(); // XXX maybe this should be moved to the main task
 
     comm_init();
+
+    wd_init();
 }

platform/platform.c

@@ -18,6 +18,9 @@
 #include "units/usart/unit_usart.h"
 #include "units/spi/unit_spi.h"
 #include "units/sipo/unit_sipo.h"
+#include "units/fcap/unit_fcap.h"
+#include "units/touch/unit_touch.h"
+#include "units/simple_pwm/unit_pwmdim.h"
 #include "hw_utils.h"
 
 void plat_init_resources(void)
@@ -88,6 +91,9 @@ void plat_init_resources(void)
     ureg_add_type(&UNIT_1WIRE);
     ureg_add_type(&UNIT_ADC);
     ureg_add_type(&UNIT_SIPO);
+    ureg_add_type(&UNIT_FCAP);
+    ureg_add_type(&UNIT_TOUCH);
+    ureg_add_type(&UNIT_PWMDIM);
 
     // Free all present resources
     {
@@ -96,7 +102,7 @@ void plat_init_resources(void)
 //        rsc_free_range(NULL, R_COMP1, R_COMP2);
         rsc_free(NULL, R_DAC1);
 //        rsc_free(NULL, R_HDMI_CEC);
-//        rsc_free(NULL, R_TSC);
+        rsc_free(NULL, R_TSC);
         rsc_free_range(NULL, R_I2C1, R_I2C2);
 //        rsc_free_range(NULL, R_I2S1, R_I2S2);
         rsc_free_range(NULL, R_SPI1, R_SPI2);
@@ -152,7 +158,7 @@ void plat_init_resources(void)
         rsc_free_range(NULL, R_TIM1, R_TIM4);
         rsc_free_range(NULL, R_TIM6, R_TIM8);
         rsc_free_range(NULL, R_TIM15, R_TIM17);
-//        rsc_free(NULL, R_TSC);
+        rsc_free(NULL, R_TSC);
         rsc_free_range(NULL, R_USART1, R_USART5);
 
         rsc_free_range(NULL, R_PA0, R_PA15);

platform/status_led.c

@@ -50,13 +50,7 @@ static inline void led_off(void)
 /** Set up the LED */
 void Indicator_Init(void)
 {
-    bool suc = true;
-
-    // Resolve and claim resource
-    Resource rsc = hw_pin2resource(STATUS_LED_PORT, STATUS_LED_PIN, &suc);
-    assert_param(suc);
-
-    assert_param(E_SUCCESS == rsc_claim(&UNIT_SYSTEM, rsc));
+    assert_param(E_SUCCESS == rsc_claim_pin(&UNIT_SYSTEM, STATUS_LED_PORT, STATUS_LED_PIN));
 }
 
 /** Set indicator ON */
@@ -67,6 +61,12 @@ void Indicator_Effect(enum GEX_StatusIndicator indicator)
         led_on();
     }
 
+    // prevent the two disk ops interfering (happens in write-reload)
+    if (indicator == STATUS_DISK_BUSY && active_effect == STATUS_DISK_BUSY_SHORT) return;
+    if (indicator == STATUS_DISK_BUSY_SHORT && active_effect == STATUS_DISK_BUSY) return;
+
+    // TODO add some better protection against effect overlap?
+
     active_effect = indicator;
     effect_time = 0;
 }
@@ -125,7 +125,15 @@ void Indicator_Tick(void)
                 active_effect = STATUS_NONE;
             }
             else if (effect_time % 100 == 0) led_on();
-            else if (effect_time % 100 == 50) led_off();
+            else if (effect_time % 100 == 20) led_off();
+        }
+        else if (active_effect == STATUS_DISK_BUSY_SHORT) {
+            if (effect_time >= 200) {
+                led_off();
+                active_effect = STATUS_NONE;
+            }
+            else if (effect_time % 100 == 0) led_on();
+            else if (effect_time % 100 == 20) led_off();
         }
         else if (active_effect == STATUS_WELCOME) {
             if (effect_time == 0) led_on();

platform/status_led.h

@@ -16,6 +16,7 @@ enum GEX_StatusIndicator {
     STATUS_NONE = 0,
     STATUS_FAULT,
     STATUS_DISK_BUSY,
+    STATUS_DISK_BUSY_SHORT,
     STATUS_DISK_ATTACHED,
     STATUS_DISK_REMOVED,
     STATUS_WELCOME,

platform/timebase.c

@@ -7,10 +7,12 @@
 
 // ---------------------------- HAL TIMEBASE -----------------------------
 
-#define TIMEBASE_TIMER TIM14
+#define TIMEBASE_TIMER TIM17
 
 HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
 {
+    // EDIT - used 17 instead because 14 was needed for fcap
+
     // TIM14 is a simple 16-bit timer timer with no special features.
     // This makes it a good choice for the timebase generation. We set it to generate
     // an interrupt every 1 ms
@@ -19,9 +21,9 @@ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
 
     // - TIM14 is always up-counting
     // - using APB1 clock
-    __HAL_RCC_TIM14_CLK_ENABLE();
-    NVIC_SetPriority(TIM14_IRQn, TickPriority); // highest possible priority
-    NVIC_EnableIRQ(TIM14_IRQn);
+    __HAL_RCC_TIM17_CLK_ENABLE();
+    NVIC_SetPriority(TIM17_IRQn, TickPriority); // highest possible priority
+    NVIC_EnableIRQ(TIM17_IRQn);
 
     /* Compute TIM1 clock */
     uint32_t uwTimclock = HAL_RCC_GetPCLK1Freq();
@@ -45,7 +47,7 @@ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
 static volatile uint32_t uwUptimeMs = 0;
 
 /* TIMEBASE TIMER ISR */
-void TIM14_IRQHandler(void)
+void TIM17_IRQHandler(void)
 {
     uwUptimeMs++;
     LL_TIM_ClearFlag_UPDATE(TIMEBASE_TIMER);
@@ -89,10 +91,10 @@ uint64_t PTIM_GetMicrotime(void)
         uwMicros = TIMEBASE_TIMER->CNT;
         uwMillis = uwUptimeMs;
 
-        if (LL_TIM_IsActiveFlag_UPDATE(TIM14)) {
+        if (LL_TIM_IsActiveFlag_UPDATE(TIMEBASE_TIMER)) {
             // This means the timer has overflown after we disabled IRQ
             // Use the last CNT value before the overflow
-            uwMicros = TIM14->ARR; // this is 999us
+            uwMicros = TIMEBASE_TIMER->ARR; // this is 999us
         }
     }
     vPortExitCritical();

platform/watchdog.c

@@ -0,0 +1,57 @@
+//
+// Created by MightyPork on 2018/02/27.
+//
+
+#include "platform.h"
+#include "watchdog.h"
+
+static volatile uint16_t suspend_depth = 0;
+static volatile bool restart_pending = false;
+
+void wd_init(void)
+{
+    dbg("IWDG init, time 2s");
+
+    LL_IWDG_Enable(IWDG);
+    LL_IWDG_EnableWriteAccess(IWDG);
+    LL_IWDG_SetPrescaler(IWDG, LL_IWDG_PRESCALER_32); // 0.8 ms
+    LL_IWDG_SetReloadCounter(IWDG, 2500); // 2s.  max 4095
+    while (!LL_IWDG_IsReady(IWDG));
+
+    // reload
+    LL_IWDG_ReloadCounter(IWDG);
+}
+
+void wd_suspend(void)
+{
+    vPortEnterCritical();
+    if (suspend_depth < 0xFFFF) {
+        suspend_depth++;
+    }
+    vPortExitCritical();
+}
+
+void wd_resume(void)
+{
+    vPortEnterCritical();
+    if (suspend_depth > 0) {
+        suspend_depth--;
+
+        if (suspend_depth == 0 && restart_pending) {
+            restart_pending = false;
+            LL_IWDG_ReloadCounter(IWDG);
+        }
+    }
+    vPortExitCritical();
+}
+
+void wd_restart(void)
+{
+    vPortEnterCritical();
+    if (suspend_depth == 0) {
+        LL_IWDG_ReloadCounter(IWDG);
+    } else {
+        restart_pending = true;
+    }
+    vPortExitCritical();
+}

platform/watchdog.h

@@ -0,0 +1,32 @@
+//
+// Created by MightyPork on 2018/02/27.
+//
+
+#ifndef GEX_F072_WATCHDOG_H
+#define GEX_F072_WATCHDOG_H
+
+/**
+ * Initialize the application watchdog
+ */
+void wd_init(void);
+
+/**
+ * Suspend watchdog restarts until resumed
+ * (used in other tasks to prevent the main task clearing the wd if the other task is locked up)
+ *
+ * The suspend/resume calls can be stacked.
+ */
+void wd_suspend(void);
+
+/**
+ * Resume restarts
+ */
+void wd_resume(void);
+
+/**
+ * Restart the wd. If restarts are suspended, postpone the restart until resumed
+ * and then restart immediately.
+ */
+void wd_restart(void);
+
+#endif //GEX_F072_WATCHDOG_H

tasks/task_main.c

@@ -4,6 +4,7 @@
 
 #include "platform.h"
 #include "platform/lock_jumper.h"
+#include "platform/watchdog.h"
 #include "status_led.h"
 #include "utils/stacksmon.h"
 #include "vfs/vfs_manager.h"
@@ -12,8 +13,6 @@
 #include "usbd_msc.h"
 #include "task_main.h"
 
-extern void plat_init(void);
-
 /* TaskUsbEvent function */
 void TaskMain(void const * argument)
 {
@@ -47,6 +46,8 @@ void TaskMain(void const * argument)
 
             cnt++;
             Indicator_Heartbeat();
+
+            wd_restart();
         }
 
         // if no message and it just timed out, go wait some more...

tasks/task_msg.c

@@ -3,6 +3,7 @@
 //
 
 #include "platform.h"
+#include "platform/watchdog.h"
 #include "comm/messages.h"
 #include "task_msg.h"
 
@@ -85,7 +86,9 @@ void TaskMsgJob(const void *argument)
             #if CDC_LOOPBACK_TEST
                 TF_WriteImpl(comm, slot.msg.data, slot.msg.len);
             #else
+                wd_suspend();
                 TF_Accept(comm, slot.msg.data, slot.msg.len);
+                wd_resume();
             #endif
         }
 

units/1wire/_ow_init.c

@@ -14,15 +14,6 @@ error_t OW_preInit(Unit *unit)
     struct priv *priv = unit->data = calloc_ck(1, sizeof(struct priv));
     if (priv == NULL) return E_OUT_OF_MEM;
 
-    // the timer is not started until needed
-    priv->busyWaitTimer = xTimerCreate("1w_tim", // name
-                                       750,      // interval (will be changed when starting it)
-                                       true,     // periodic (we use this only for the polling variant, the one-shot will stop the timer in the CB)
-                                       unit,     // user data
-                                       OW_TimerCb); // callback
-
-    if (priv->busyWaitTimer == NULL) return E_OUT_OF_MEM;
-
     // some defaults
     priv->pin_number = 0;
     priv->port_name = 'A';
@@ -40,7 +31,7 @@ error_t OW_init(Unit *unit)
     // --- Parse config ---
     priv->ll_pin = hw_pin2ll(priv->pin_number, &suc);
     priv->port = hw_port2periph(priv->port_name, &suc);
-    Resource rsc = hw_pin2resource(priv->port_name, priv->pin_number, &suc);
+    Resource rsc = rsc_portpin2rsc(priv->port_name, priv->pin_number, &suc);
     if (!suc) return E_BAD_CONFIG;
 
     // --- Claim resources ---
@@ -63,9 +54,6 @@ void OW_deInit(Unit *unit)
     // Release all resources
     rsc_teardown(unit);
 
-    // Delete the software timer
-    assert_param(pdPASS == xTimerDelete(priv->busyWaitTimer, 1000));
-
     // Free memory
     free_ck(unit->data);
 }

units/1wire/_ow_settings.c

@@ -18,17 +18,15 @@ void OW_loadBinary(Unit *unit, PayloadParser *pp)
 
     priv->port_name = pp_char(pp);
     priv->pin_number = pp_u8(pp);
-    if (version >= 1) {
     priv->parasitic = pp_bool(pp);
 }
-}
 
 /** Write to a binary buffer for storing in Flash */
 void OW_writeBinary(Unit *unit, PayloadBuilder *pb)
 {
     struct priv *priv = unit->data;
 
-    pb_u8(pb, 1); // version
+    pb_u8(pb, 0); // version
 
     pb_char(pb, priv->port_name);
     pb_u8(pb, priv->pin_number);
@@ -44,10 +42,10 @@ error_t OW_loadIni(Unit *unit, const char *key, const char *value)
     struct priv *priv = unit->data;
 
     if (streq(key, "pin")) {
-        suc = parse_pin(value, &priv->port_name, &priv->pin_number);
+        suc = cfg_portpin_parse(value, &priv->port_name, &priv->pin_number);
     }
     else if (streq(key, "parasitic")) {
-        priv->parasitic = str_parse_yn(value, &suc);
+        priv->parasitic = cfg_bool_parse(value, &suc);
     }
     else {
         return E_BAD_KEY;
@@ -66,5 +64,5 @@ void OW_writeIni(Unit *unit, IniWriter *iw)
     iw_entry(iw, "pin", "%c%d", priv->port_name,  priv->pin_number);
 
     iw_comment(iw, "Parasitic (bus-powered) mode");
-    iw_entry(iw, "parasitic", str_yn(priv->parasitic));
+    iw_entry_s(iw, "parasitic", str_yn(priv->parasitic));
 }

units/1wire/unit_1wire.c

@@ -38,12 +38,13 @@ static void OW_TimerRespCb(Job *job)
  *
  * @param xTimer
  */
-void OW_TimerCb(TimerHandle_t xTimer)
+void OW_tickHandler(Unit *unit)
 {
-    Unit *unit = pvTimerGetTimerID(xTimer);
-    assert_param(unit);
     struct priv *priv = unit->data;
-    assert_param(priv->busy);
+    if(!priv->busy) {
+        dbg("ow tick should be disabled now!");
+        return;
+    }
 
     if (priv->parasitic) {
         // this is the end of the 750ms measurement time
@@ -56,7 +57,8 @@ void OW_TimerCb(TimerHandle_t xTimer)
 
         uint32_t time = PTIM_GetTime();
         if (time - priv->busyStart > 1000) {
-            xTimerStop(xTimer, 100);
+            unit->tick_interval = 0;
+            unit->_tick_cnt = 0;
 
             Job j = {
                 .unit = unit,
@@ -69,7 +71,8 @@ void OW_TimerCb(TimerHandle_t xTimer)
 
     return;
 halt_ok:
-    xTimerStop(xTimer, 100);
+    unit->tick_interval = 0;
+    unit->_tick_cnt = 0;
 
     Job j = {
         .unit = unit,
@@ -79,7 +82,6 @@ halt_ok:
     scheduleJob(&j);
 }
 
-
 enum PinCmd_ {
     CMD_CHECK_PRESENCE = 0, // simply tests that any devices are attached
     CMD_SEARCH_ADDR = 1,    // perform a scan of the bus, retrieving all found device ROMs
@@ -120,13 +122,13 @@ static error_t OW_handleRequest(Unit *unit, TF_ID frame_id, uint8_t command, Pay
          */
         case CMD_POLL_FOR_1:
             // This can't be exposed via the UU API, due to being async
+            unit->_tick_cnt = 0;
+            unit->tick_interval = 750;
             if (priv->parasitic) {
-                assert_param(pdPASS == xTimerChangePeriod(priv->busyWaitTimer, 750, 100));
+                unit->tick_interval = 750;
             } else {
-                // every 10 ticks
-                assert_param(pdPASS == xTimerChangePeriod(priv->busyWaitTimer, 10, 100));
+                unit->tick_interval = 10;
             }
-            assert_param(pdPASS == xTimerStart(priv->busyWaitTimer, 100));
             priv->busy = true;
             priv->busyStart = PTIM_GetTime();
             priv->busyRequestId = frame_id;
@@ -242,4 +244,5 @@ const UnitDriver UNIT_1WIRE = {
     .deInit = OW_deInit,
     // Function
     .handleRequest = OW_handleRequest,
+    .updateTick = OW_tickHandler,
 };

units/adc/_adc_core.c

@@ -40,7 +40,8 @@ static void UADC_JobSendBlockChunk(Job *job)
         .len = (TF_LEN) (1 /*seq*/ + count * sizeof(uint16_t)),
         .type = type,
     };
-    TF_Respond_Multipart(comm, &msg);
+
+    assert_param(true == TF_Respond_Multipart(comm, &msg));
     TF_Multipart_Payload(comm, &priv->stream_serial, 1);
     TF_Multipart_Payload(comm, (uint8_t *) (priv->dma_buffer + start), count * sizeof(uint16_t));
     TF_Multipart_Close(comm);
@@ -171,7 +172,7 @@ static void handle_httc(Unit *unit, bool tc)
     const bool m_fixcpt = priv->opmode == ADC_OPMODE_BLCAP;
 
     if (ht) {
-        end = (priv->buf_itemcount / 2);
+        end = (priv->buf_itemcount >> 1); // div2
     }
     else {
         end = priv->buf_itemcount;
@@ -234,7 +235,7 @@ static void handle_httc(Unit *unit, bool tc)
         priv->stream_startpos = 0;
     }
     else {
-        priv->stream_startpos = priv->buf_itemcount / 2;
+        priv->stream_startpos = priv->buf_itemcount >> 1; // div2
     }
 }
 
@@ -289,7 +290,7 @@ void UADC_DMA_Handler(void *arg)
         const bool m_stream = priv->opmode == ADC_OPMODE_STREAM;
         const bool m_fixcpt = priv->opmode == ADC_OPMODE_BLCAP;
         if (m_trigd || m_stream || m_fixcpt) {
-            const uint32_t half = (uint32_t) (priv->buf_itemcount / 2);
+            const uint32_t half = (uint32_t) (priv->buf_itemcount >> 1); // div2
             if (ht && tc) {
                 // dual event interrupt - may happen if we missed both and they were pending after
                 // interrupts became enabled again (this can happen due to the EOS or other higher prio irq's)
@@ -336,8 +337,10 @@ void UADC_ADC_EOS_Handler(void *arg)
     if (priv->opmode == ADC_OPMODE_UNINIT) return;
 
     // Wait for the DMA to complete copying the last sample
-    uint32_t dmapos;
+    uint32_t dmapos = DMA_POS(priv);
+    if ((DMA_POS(priv) % priv->nb_channels) != 0) {
         hw_wait_while((dmapos = DMA_POS(priv)) % priv->nb_channels != 0, 100); // XXX this could be changed to reading it from the DR instead
+    }
 
     uint32_t sample_pos;
     if (dmapos == 0) {

units/adc/_adc_init.c

@@ -35,7 +35,7 @@ error_t UADC_SetSampleRate(Unit *unit, uint32_t hertz)
 
     uint16_t presc;
     uint32_t count;
-    if (!solve_timer(PLAT_APB1_HZ, hertz, true, &presc, &count, &priv->real_frequency)) {
+    if (!hw_solve_timer(PLAT_APB1_HZ, hertz, true, &presc, &count, &priv->real_frequency)) {
         dbg("Failed to resolve timer params.");
         return E_BAD_VALUE;
     }

units/adc/_adc_settings.c

@@ -48,20 +48,20 @@ error_t UADC_loadIni(Unit *unit, const char *key, const char *value)
     struct priv *priv = unit->data;
 
     if (streq(key, "channels")) {
-        priv->cfg.channels = parse_pinmask(value, &suc);
+        priv->cfg.channels = cfg_pinmask_parse_32(value, &suc);
     }
     else if (streq(key, "sample_time")) {
-        priv->cfg.sample_time = (uint8_t) avr_atoi(value);
+        priv->cfg.sample_time = cfg_u8_parse(value, &suc);
         if (priv->cfg.sample_time > 7) return E_BAD_VALUE;
     }
     else if (streq(key, "frequency")) {
-        priv->cfg.frequency = (uint32_t) avr_atoi(value);
+        priv->cfg.frequency = cfg_u32_parse(value, &suc);
     }
     else if (streq(key, "buffer_size")) {
-        priv->cfg.buffer_size = (uint32_t) avr_atoi(value);
+        priv->cfg.buffer_size = cfg_u32_parse(value, &suc);
     }
     else if (streq(key, "avg_factor")) {
-        priv->cfg.averaging_factor = (uint16_t) avr_atoi(value);
+        priv->cfg.averaging_factor = cfg_u16_parse(value, &suc);
         if (priv->cfg.averaging_factor > 1000) return E_BAD_VALUE;
     }
     else {
@@ -80,14 +80,14 @@ void UADC_writeIni(Unit *unit, IniWriter *iw)
     iw_comment(iw, "Enabled channels, comma separated");
     iw_comment(iw, " 0  1  2  3  4  5  6  7    8  9   10 11 12 13 14 15   16    17");
     iw_comment(iw, "A0 A1 A2 A3 A4 A5 A6 A7   B0 B1   C0 C1 C2 C3 C4 C5   Tsens Vref");
-    iw_entry(iw, "channels", "%s", pinmask2str_up(priv->cfg.channels, unit_tmp512));
+    iw_entry_s(iw, "channels", cfg_pinmask_encode(priv->cfg.channels, unit_tmp512, true));
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Sampling time (0-7)");
-    iw_entry(iw, "sample_time", "%d", (int)priv->cfg.sample_time);
+    iw_entry_d(iw, "sample_time", priv->cfg.sample_time);
 
     iw_comment(iw, "Sampling frequency (Hz)");
-    iw_entry(iw, "frequency", "%d", (int)priv->cfg.frequency);
+    iw_entry_d(iw, "frequency", priv->cfg.frequency);
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Sample buffer size");
@@ -95,12 +95,12 @@ void UADC_writeIni(Unit *unit, IniWriter *iw)
     iw_comment(iw, "- defines the maximum pre-trigger size (divide by # of channels)");
     iw_comment(iw, "- captured data is sent in half-buffer chunks");
     iw_comment(iw, "- buffer overrun aborts the data capture");
-    iw_entry(iw, "buffer_size", "%d", (int)priv->cfg.buffer_size);
+    iw_entry_d(iw, "buffer_size", priv->cfg.buffer_size);
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Exponential averaging coefficient (permil, range 0-1000 ~ 0.000-1.000)");
     iw_comment(iw, "- used formula: y[t]=(1-k)*y[t-1]+k*u[t]");
     iw_comment(iw, "- not available when a capture is running");
-    iw_entry(iw, "avg_factor", "%d", priv->cfg.averaging_factor);
+    iw_entry_d(iw, "avg_factor", priv->cfg.averaging_factor);
 }
 

units/digital_in/_din_settings.c

@@ -20,23 +20,18 @@ void DIn_loadBinary(Unit *unit, PayloadParser *pp)
     priv->pins = pp_u16(pp);
     priv->pulldown = pp_u16(pp);
     priv->pullup = pp_u16(pp);
-
-    if (version >= 1) {
     priv->trig_rise = pp_u16(pp);
     priv->trig_fall = pp_u16(pp);
     priv->trig_holdoff = pp_u16(pp);
-    }
-    if (version >= 2) {
     priv->def_auto = pp_u16(pp);
 }
-}
 
 /** Write to a binary buffer for storing in Flash */
 void DIn_writeBinary(Unit *unit, PayloadBuilder *pb)
 {
     struct priv *priv = unit->data;
 
-    pb_u8(pb, 2); // version
+    pb_u8(pb, 0); // version
 
     pb_char(pb, priv->port_name);
     pb_u16(pb, priv->pins);
@@ -57,28 +52,28 @@ error_t DIn_loadIni(Unit *unit, const char *key, const char *value)
     struct priv *priv = unit->data;
 
     if (streq(key, "port")) {
-        suc = parse_port_name(value, &priv->port_name);
+        suc = cfg_port_parse(value, &priv->port_name);
     }
     else if (streq(key, "pins")) {
-        priv->pins = parse_pinmask(value, &suc);
+        priv->pins = cfg_pinmask_parse(value, &suc);
     }
     else if (streq(key, "pull-up")) {
-        priv->pullup = parse_pinmask(value, &suc);
+        priv->pullup = cfg_pinmask_parse(value, &suc);
     }
     else if (streq(key, "pull-down")) {
-        priv->pulldown = parse_pinmask(value, &suc);
+        priv->pulldown = cfg_pinmask_parse(value, &suc);
     }
     else if (streq(key, "trig-rise")) {
-        priv->trig_rise = parse_pinmask(value, &suc);
+        priv->trig_rise = cfg_pinmask_parse(value, &suc);
     }
     else if (streq(key, "trig-fall")) {
-        priv->trig_fall = parse_pinmask(value, &suc);
+        priv->trig_fall = cfg_pinmask_parse(value, &suc);
     }
     else if (streq(key, "auto-trigger")) {
-        priv->def_auto = parse_pinmask(value, &suc);
+        priv->def_auto = cfg_pinmask_parse(value, &suc);
     }
     else if (streq(key, "hold-off")) {
-        priv->trig_holdoff = (uint16_t) avr_atoi(value);
+        priv->trig_holdoff = cfg_u16_parse(value, &suc);
     }
     else {
         return E_BAD_KEY;
@@ -97,24 +92,24 @@ void DIn_writeIni(Unit *unit, IniWriter *iw)
     iw_entry(iw, "port", "%c", priv->port_name);
 
     iw_comment(iw, "Pins (comma separated, supports ranges)");
-    iw_entry(iw, "pins", "%s", pinmask2str(priv->pins, unit_tmp512));
+    iw_entry_s(iw, "pins", cfg_pinmask_encode(priv->pins, unit_tmp512, 0));
 
     iw_comment(iw, "Pins with pull-up");
-    iw_entry(iw, "pull-up", "%s", pinmask2str(priv->pullup, unit_tmp512));
+    iw_entry_s(iw, "pull-up", cfg_pinmask_encode(priv->pullup, unit_tmp512, 0));
 
     iw_comment(iw, "Pins with pull-down");
-    iw_entry(iw, "pull-down", "%s", pinmask2str(priv->pulldown, unit_tmp512));
+    iw_entry_s(iw, "pull-down", cfg_pinmask_encode(priv->pulldown, unit_tmp512, 0));
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Trigger pins activated by rising/falling edge");
-    iw_entry(iw, "trig-rise", "%s", pinmask2str(priv->trig_rise, unit_tmp512));
-    iw_entry(iw, "trig-fall", "%s", pinmask2str(priv->trig_fall, unit_tmp512));
+    iw_entry_s(iw, "trig-rise", cfg_pinmask_encode(priv->trig_rise, unit_tmp512, 0));
+    iw_entry_s(iw, "trig-fall", cfg_pinmask_encode(priv->trig_fall, unit_tmp512, 0));
 
     iw_comment(iw, "Trigger pins auto-armed by default");
-    iw_entry(iw, "auto-trigger", "%s", pinmask2str(priv->def_auto, unit_tmp512));
+    iw_entry_s(iw, "auto-trigger", cfg_pinmask_encode(priv->def_auto, unit_tmp512, 0));
 
     iw_comment(iw, "Triggers hold-off time (ms)");
-    iw_entry(iw, "hold-off", "%d", (int)priv->trig_holdoff);
+    iw_entry_d(iw, "hold-off", priv->trig_holdoff);
 
 #if PLAT_NO_FLOATING_INPUTS
     iw_comment(iw, "NOTE: Pins use pull-up by default.\r\n");

units/digital_out/_dout_settings.c

@@ -44,16 +44,16 @@ error_t DOut_loadIni(Unit *unit, const char *key, const char *value)
     struct priv *priv = unit->data;
 
     if (streq(key, "port")) {
-        suc = parse_port_name(value, &priv->port_name);
+        suc = cfg_port_parse(value, &priv->port_name);
     }
     else if (streq(key, "pins")) {
-        priv->pins = (uint16_t) parse_pinmask(value, &suc);
+        priv->pins = cfg_pinmask_parse(value, &suc);
     }
     else if (streq(key, "initial")) {
-        priv->initial = (uint16_t) parse_pinmask(value, &suc);
+        priv->initial = cfg_pinmask_parse(value, &suc);
     }
     else if (streq(key, "open-drain")) {
-        priv->open_drain = (uint16_t) parse_pinmask(value, &suc);
+        priv->open_drain = cfg_pinmask_parse(value, &suc);
     }
     else {
         return E_BAD_KEY;
@@ -72,11 +72,11 @@ void DOut_writeIni(Unit *unit, IniWriter *iw)
     iw_entry(iw, "port", "%c", priv->port_name);
 
     iw_comment(iw, "Pins (comma separated, supports ranges)");
-    iw_entry(iw, "pins", "%s", pinmask2str(priv->pins, unit_tmp512));
+    iw_entry_s(iw, "pins", cfg_pinmask_encode(priv->pins, unit_tmp512, 0));
 
     iw_comment(iw, "Initially high pins");
-    iw_entry(iw, "initial", "%s", pinmask2str(priv->initial, unit_tmp512));
+    iw_entry_s(iw, "initial", cfg_pinmask_encode(priv->initial, unit_tmp512, 0));
 
     iw_comment(iw, "Open-drain pins");
-    iw_entry(iw, "open-drain", "%s", pinmask2str(priv->open_drain, unit_tmp512));
+    iw_entry_s(iw, "open-drain", cfg_pinmask_encode(priv->open_drain, unit_tmp512, 0));
 }

units/fcap/_fcap_api.c

@@ -0,0 +1,11 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+#include "unit_fcap.h"
+
+#define FCAP_INTERNAL
+#include "_fcap_internal.h"
+

units/fcap/_fcap_core.c

@@ -0,0 +1,462 @@
+//
+// Created by MightyPork on 2018/02/20.
+//
+
+#include <stm32f072xb.h>
+#include "platform.h"
+
+#define FCAP_INTERNAL
+#include "_fcap_internal.h"
+
+static void UFCAP_StopMeasurement(Unit *unit);
+static void UFCAP_ConfigureForIndirectCapture(Unit *unit);
+static void UFCAP_ConfigureForDirectCapture(Unit *unit, uint16_t msec);
+static void UFCAP_ConfigureForFreeCapture(Unit *unit);
+
+uint32_t UFCAP_GetFreeCounterValue(Unit *unit)
+{
+    struct priv * const priv = unit->data;
+    TIM_TypeDef * const TIMx = priv->TIMx;
+    return TIMx->CNT;
+}
+
+uint32_t UFCAP_FreeCounterClear(Unit *unit)
+{
+    struct priv * const priv = unit->data;
+    TIM_TypeDef * const TIMx = priv->TIMx;
+
+    // this isn't perfect, we can miss one clock
+    // but it's probably the best we can do here ...
+    vPortEnterCritical();
+    uint32_t val = TIMx->CNT;
+    TIMx->CNT = 0;
+    vPortExitCritical();
+
+    return val;
+}
+
+static void UFCAP_IndirectBurstReportJob(Job *job)
+{
+    Unit *unit = job->unit;
+    struct priv * const priv = unit->data;
+
+    uint8_t buf[20];
+    PayloadBuilder pb = pb_start(buf, 20, NULL);
+
+    pb_u16(&pb, PLAT_AHB_MHZ);
+    pb_u16(&pb, priv->ind_burst.n_count);
+    pb_u64(&pb, priv->ind_burst.period_acu);
+    pb_u64(&pb, priv->ind_burst.ontime_acu);
+
+    assert_param(pb.ok);
+
+    com_respond_pb(priv->request_id, MSG_SUCCESS, &pb);
+
+    // timer is already stopped, now in OPMODE_BUSY
+    priv->opmode = OPMODE_IDLE;
+}
+
+static void UFCAP_SinglePulseReportJob(Job *job)
+{
+    Unit *unit = job->unit;
+    struct priv * const priv = unit->data;
+
+    uint8_t buf[6];
+    PayloadBuilder pb = pb_start(buf, 6, NULL);
+
+    pb_u16(&pb, PLAT_AHB_MHZ);
+    pb_u32(&pb, job->data1);
+    assert_param(pb.ok);
+
+    com_respond_pb(priv->request_id, MSG_SUCCESS, &pb);
+
+    // timer is already stopped, now in OPMODE_BUSY
+    priv->opmode = OPMODE_IDLE;
+}
+
+/**
+ * Count is passed in data1
+ * @param job
+ */
+static void UFCAP_DirectBurstReportJob(Job *job)
+{
+    Unit *unit = job->unit;
+    struct priv * const priv = unit->data;
+
+    uint8_t buf[8];
+    PayloadBuilder pb = pb_start(buf, 8, NULL);
+
+    pb_u8(&pb, priv->direct_presc);
+    pb_u16(&pb, priv->dir_burst.msec);
+    pb_u32(&pb, job->data1);
+
+    assert_param(pb.ok);
+
+    com_respond_pb(priv->request_id, MSG_SUCCESS, &pb);
+
+    // timer is already stopped, now in OPMODE_BUSY
+    priv->opmode = OPMODE_IDLE;
+}
+
+void UFCAP_TIMxHandler(void *arg)
+{
+    Unit *unit = arg;
+    assert_param(unit);
+    struct priv * const priv = unit->data;
+    assert_param(priv);
+
+    TIM_TypeDef * const TIMx = priv->TIMx;
+
+    if (priv->opmode == OPMODE_INDIRECT_CONT) {
+        if (LL_TIM_IsActiveFlag_CC1(TIMx)) {
+            if (priv->n_skip > 0) {
+                priv->n_skip--;
+            } else {
+                priv->ind_cont.last_period = LL_TIM_IC_GetCaptureCH1(TIMx);
+                priv->ind_cont.last_ontime = priv->ind_cont.ontime;
+            }
+            LL_TIM_ClearFlag_CC1(TIMx);
+            LL_TIM_ClearFlag_CC1OVR(TIMx);
+        }
+
+        if (LL_TIM_IsActiveFlag_CC2(TIMx)) {
+            priv->ind_cont.ontime = LL_TIM_IC_GetCaptureCH2(TIMx);
+            LL_TIM_ClearFlag_CC2(TIMx);
+            LL_TIM_ClearFlag_CC2OVR(TIMx);
+        }
+    }
+    else if (priv->opmode == OPMODE_SINGLE_PULSE) {
+        if (LL_TIM_IsActiveFlag_CC2(TIMx)) {
+            // single pulse - does not wait for the second edge
+            uint32_t len = LL_TIM_IC_GetCaptureCH2(TIMx);
+
+            priv->opmode = OPMODE_BUSY;
+            UFCAP_StopMeasurement(unit);
+
+            Job j = {
+                .cb = UFCAP_SinglePulseReportJob,
+                .unit = unit,
+                .data1 = len,
+            };
+            scheduleJob(&j);
+        }
+    }
+    else if (priv->opmode == OPMODE_INDIRECT_BURST) {
+        if (LL_TIM_IsActiveFlag_CC1(TIMx)) {
+            const uint32_t period = LL_TIM_IC_GetCaptureCH1(TIMx);
+            const uint32_t ontime = priv->ind_burst.ontime;
+
+            if (priv->n_skip > 0) {
+                priv->n_skip--;
+            } else {
+                priv->ind_burst.ontime_acu += ontime;
+                priv->ind_burst.period_acu += period;
+                if (++priv->ind_burst.n_count == priv->ind_burst.n_target) {
+                    priv->opmode = OPMODE_BUSY;
+                    UFCAP_StopMeasurement(unit);
+
+                    Job j = {
+                        .cb = UFCAP_IndirectBurstReportJob,
+                        .unit = unit,
+                    };
+                    scheduleJob(&j);
+                }
+            }
+
+            LL_TIM_ClearFlag_CC1(TIMx);
+            LL_TIM_ClearFlag_CC1OVR(TIMx);
+        }
+
+        if (LL_TIM_IsActiveFlag_CC2(TIMx)) {
+            priv->ind_burst.ontime = LL_TIM_IC_GetCaptureCH2(TIMx);
+            LL_TIM_ClearFlag_CC2(TIMx);
+            LL_TIM_ClearFlag_CC2OVR(TIMx);
+        }
+    }
+    else if (priv->opmode == OPMODE_IDLE) {
+        // clear everything - in idle it would cycle in the handler forever
+        TIMx->SR = 0;
+    }
+    else {
+        trap("Unhandled fcap TIMx irq");
+    }
+}
+
+void UFCAP_TIMyHandler(void *arg)
+{
+    Unit *unit = arg;
+    assert_param(unit);
+    struct priv *const priv = unit->data;
+    assert_param(priv);
+
+    TIM_TypeDef * const TIMx = priv->TIMx;
+    TIM_TypeDef * const TIMy = priv->TIMy;
+    uint32_t cnt = TIMx->CNT; // TIMx should be stopped now
+
+//    dbg("> TIMy Handler, TIMx cntr is %d", cnt);
+    priv->dir_cont.last_count = cnt;
+
+    if (priv->opmode == OPMODE_DIRECT_CONT) {
+        LL_TIM_DisableCounter(TIMx);
+        LL_TIM_DisableCounter(TIMy);
+        LL_TIM_SetCounter(TIMx, 0);
+        LL_TIM_SetCounter(TIMy, 0);
+        LL_TIM_EnableCounter(TIMy); // next loop
+        LL_TIM_EnableCounter(TIMx);
+    }
+    else if (priv->opmode == OPMODE_DIRECT_BURST) {
+        priv->opmode = OPMODE_BUSY;
+        UFCAP_StopMeasurement(unit);
+
+        Job j = {
+            .cb = UFCAP_DirectBurstReportJob,
+            .unit = unit,
+            .data1 = cnt,
+        };
+        scheduleJob(&j);
+    }
+    else if (priv->opmode == OPMODE_IDLE) {
+        // clear everything - in idle it would cycle in the handler forever
+        TIMy->SR = 0;
+    }
+    else {
+        trap("Unhandled fcap TIMy irq");
+    }
+
+    LL_TIM_ClearFlag_UPDATE(TIMy);
+}
+
+static void UFCAP_ClearTimerConfig(Unit *unit)
+{
+    struct priv * const priv = unit->data;
+    TIM_TypeDef * const TIMx = priv->TIMx;
+
+    // CLEAR CURRENT STATE, STOP
+    UFCAP_StopMeasurement(unit);
+
+    // CONFIGURE TIMER BASIC PARAMS
+    LL_TIM_SetPrescaler(TIMx, 0);
+    LL_TIM_SetAutoReload(TIMx, 0xFFFFFFFF);
+    LL_TIM_EnableARRPreload(TIMx);
+    LL_TIM_GenerateEvent_UPDATE(TIMx);
+}
+
+/**
+ * Reset all timer registers
+ *
+ * @param unit
+ */
+static void UFCAP_StopMeasurement(Unit *unit)
+{
+    struct priv * const priv = unit->data;
+
+    LL_TIM_DeInit(priv->TIMx); // clear all flags and settings
+    LL_TIM_DeInit(priv->TIMy); // clear all flags and settings
+}
+
+/**
+ * Switch the FCAP module opmode
+ *
+ * @param unit
+ * @param opmode
+ */
+void UFCAP_SwitchMode(Unit *unit, enum fcap_opmode opmode)
+{
+    struct priv * const priv = unit->data;
+
+    if (opmode == priv->opmode) return;
+
+    priv->opmode = opmode;
+
+    switch (opmode) {
+        case OPMODE_IDLE:
+            // XXX maybe we should report the abort to the PC-side listener
+            UFCAP_StopMeasurement(unit);
+            break;
+
+        case OPMODE_INDIRECT_CONT:
+            priv->ind_cont.last_ontime = 0;
+            priv->ind_cont.last_period = 0;
+            priv->ind_cont.ontime = 0;
+            priv->n_skip = 1; // discard the first cycle (will be incomplete)
+            UFCAP_ConfigureForIndirectCapture(unit); // is also stopped and restarted
+            break;
+
+        case OPMODE_INDIRECT_BURST:
+            priv->ind_burst.ontime = 0;
+            priv->ind_burst.n_count = 0;
+            priv->ind_burst.period_acu = 0;
+            priv->ind_burst.ontime_acu = 0;
+            priv->n_skip = 1; // discard the first cycle (will be incomplete)
+            UFCAP_ConfigureForIndirectCapture(unit); // is also stopped and restarted
+            break;
+
+        case OPMODE_SINGLE_PULSE:
+            priv->n_skip = 0;
+            UFCAP_ConfigureForIndirectCapture(unit); // is also stopped and restarted
+            break;
+
+        case OPMODE_DIRECT_CONT:
+            // msec is set by caller
+            priv->dir_cont.last_count = 0;
+            priv->n_skip = 1; // discard the first cycle (will be incomplete)
+            UFCAP_ConfigureForDirectCapture(unit, priv->direct_msec);
+            break;
+
+        case OPMODE_DIRECT_BURST:
+            // msec is set by caller
+            priv->n_skip = 0; // no skip here (if there was any)
+            UFCAP_ConfigureForDirectCapture(unit, (uint16_t) priv->dir_burst.msec);
+            break;
+
+        case OPMODE_FREE_COUNTER:
+            UFCAP_ConfigureForFreeCapture(unit);
+            break;
+
+        default:
+            trap("Unhandled opmode %d", (int)opmode);
+    }
+}
+
+/**
+ * Configure peripherals for an indirect capture (PWM measurement) - continuous or burst
+ * @param unit
+ */
+static void UFCAP_ConfigureForIndirectCapture(Unit *unit)
+{
+    struct priv * const priv = unit->data;
+    TIM_TypeDef * const TIMx = priv->TIMx;
+    const uint32_t ll_ch_a = priv->ll_ch_a;
+    const uint32_t ll_ch_b = priv->ll_ch_b;
+
+    UFCAP_ClearTimerConfig(unit);
+
+    // Enable channels and select mapping to TIx signals
+
+    // A - will be used to measure period
+    // B - will be used to measure the duty cycle
+
+    //         _________                  ______
+    // _______|         |________________|
+    //        A         B                A
+    //        irq       irq,cap          irq
+    //        reset
+
+    // B irq may be used if we want to measure a pulse width
+
+    // Normally TI1 = CH1, TI2 = CH2.
+    // It's possible to select the other channel, which we use to connect both TIx to the shame CHx.
+    LL_TIM_IC_SetActiveInput(TIMx, ll_ch_a, priv->a_direct ? LL_TIM_ACTIVEINPUT_DIRECTTI   : LL_TIM_ACTIVEINPUT_INDIRECTTI);
+    LL_TIM_IC_SetActiveInput(TIMx, ll_ch_b, priv->a_direct ? LL_TIM_ACTIVEINPUT_INDIRECTTI : LL_TIM_ACTIVEINPUT_DIRECTTI);
+    LL_TIM_IC_SetPolarity(TIMx, ll_ch_a, priv->active_level ? LL_TIM_IC_POLARITY_RISING : LL_TIM_IC_POLARITY_FALLING);
+    LL_TIM_IC_SetPolarity(TIMx, ll_ch_b, priv->active_level ? LL_TIM_IC_POLARITY_FALLING : LL_TIM_IC_POLARITY_RISING);
+
+    if (priv->dfilter > 15) priv->dfilter = 15;
+    uint32_t filter = LL_TIM_IC_FILTERS[priv->dfilter];
+    LL_TIM_IC_SetFilter(TIMx, ll_ch_a, filter);
+    LL_TIM_IC_SetFilter(TIMx, ll_ch_b, filter);
+
+    LL_TIM_CC_EnableChannel(TIMx, ll_ch_a | ll_ch_b);
+
+    LL_TIM_SetSlaveMode(TIMx, LL_TIM_SLAVEMODE_RESET);
+    LL_TIM_SetTriggerInput(TIMx, LL_TIM_TS_TI1FP1); // Use Filtered Input 1 (TI1)
+
+    LL_TIM_EnableMasterSlaveMode(TIMx);
+
+    LL_TIM_ClearFlag_CC1(TIMx);
+    LL_TIM_ClearFlag_CC1OVR(TIMx);
+    LL_TIM_ClearFlag_CC2(TIMx);
+    LL_TIM_ClearFlag_CC2OVR(TIMx);
+
+    LL_TIM_EnableIT_CC1(TIMx);
+    LL_TIM_EnableIT_CC2(TIMx);
+    LL_TIM_EnableCounter(TIMx);
+}
+
+
+/**
+ * Configure peripherals for an indirect capture (PWM measurement) - continuous or burst
+ * @param unit
+ */
+static void UFCAP_ConfigureForDirectCapture(Unit *unit, uint16_t msec)
+{
+    struct priv * const priv = unit->data;
+
+//    dbg("Configuring Direct capture...");
+
+    UFCAP_ClearTimerConfig(unit);
+
+    {
+        TIM_TypeDef *const TIMy = priv->TIMy;
+        assert_param(PLAT_AHB_MHZ<=65);
+        uint16_t presc = PLAT_AHB_MHZ*1000;
+        uint32_t count = msec+1; // it's one tick longer because we generate OCREF on the exact msec count - it must be at least 1 tick long
+
+        LL_TIM_SetPrescaler(TIMy, (uint32_t) (presc - 1));
+        LL_TIM_SetAutoReload(TIMy, count - 1);
+        LL_TIM_EnableARRPreload(TIMy);
+        LL_TIM_GenerateEvent_UPDATE(TIMy);
+        LL_TIM_SetOnePulseMode(TIMy, LL_TIM_ONEPULSEMODE_SINGLE);
+        LL_TIM_OC_EnableFast(TIMy, LL_TIM_CHANNEL_CH1);
+
+//        dbg("TIMy presc %d, count %d", (int) presc, (int) count);
+
+        LL_TIM_SetTriggerOutput(TIMy, LL_TIM_TRGO_OC1REF);
+        LL_TIM_OC_SetMode(TIMy, LL_TIM_CHANNEL_CH1, LL_TIM_OCMODE_PWM1); // 1 until CC, then 0
+        LL_TIM_OC_SetCompareCH1(TIMy, count-1);
+        LL_TIM_CC_EnableChannel(TIMy, LL_TIM_CHANNEL_CH1); // enable the output channel that produces a trigger
+
+        LL_TIM_ClearFlag_UPDATE(TIMy);
+        LL_TIM_EnableIT_UPDATE(TIMy);
+    }
+
+    {
+        // TIMx - the slave
+        TIM_TypeDef *const TIMx = priv->TIMx;
+        LL_TIM_SetSlaveMode(TIMx, LL_TIM_SLAVEMODE_GATED);
+        LL_TIM_SetTriggerInput(TIMx, LL_TIM_TS_ITR3); // ITR3 is TIM14 which we use as TIMy
+        LL_TIM_EnableMasterSlaveMode(TIMx);
+
+        uint32_t presc = LL_TIM_ETR_PRESCALER_DIV1;
+        switch (priv->direct_presc) {
+            case 1: presc = LL_TIM_ETR_PRESCALER_DIV1; break;
+            case 2: presc = LL_TIM_ETR_PRESCALER_DIV2; break;
+            case 4: presc = LL_TIM_ETR_PRESCALER_DIV4; break;
+            case 8: presc = LL_TIM_ETR_PRESCALER_DIV8; break;
+            default:
+                priv->direct_presc = 1; // will be sent with the response
+        }
+
+        if (priv->dfilter > 15) priv->dfilter = 15;
+        uint32_t filter = LL_TIM_ETR_FILTERS[priv->dfilter];
+
+        LL_TIM_ConfigETR(TIMx,
+                         priv->active_level ? LL_TIM_ETR_POLARITY_NONINVERTED : LL_TIM_ETR_POLARITY_INVERTED,
+                         presc,
+                         filter);
+
+        LL_TIM_EnableExternalClock(TIMx); // TODO must check and deny this mode if the pin is not on CH1 = external trigger input
+
+        LL_TIM_SetCounter(TIMx, 0);
+        LL_TIM_EnableCounter(TIMx);
+    }
+
+    LL_TIM_EnableCounter(priv->TIMy); // XXX this will start the first pulse (maybe)
+}
+
+
+/**
+ * Freerunning capture (counting pulses - geiger)
+ * @param unit
+ */
+static void UFCAP_ConfigureForFreeCapture(Unit *unit)
+{
+    struct priv * const priv = unit->data;
+
+    UFCAP_ClearTimerConfig(unit);
+
+    TIM_TypeDef *const TIMx = priv->TIMx;
+    LL_TIM_EnableExternalClock(TIMx);
+    LL_TIM_SetCounter(TIMx, 0);
+    LL_TIM_EnableCounter(TIMx);
+}

units/fcap/_fcap_init.c

@@ -0,0 +1,147 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+
+#define FCAP_INTERNAL
+#include "_fcap_internal.h"
+
+/** Allocate data structure and set defaults */
+error_t UFCAP_preInit(Unit *unit)
+{
+    struct priv *priv = unit->data = calloc_ck(1, sizeof(struct priv));
+    if (priv == NULL) return E_OUT_OF_MEM;
+
+    priv->conf.signal_pname = 'A';
+    priv->conf.signal_pnum = 0;
+
+    priv->conf.active_level = 1;
+    priv->conf.direct_presc = 1;
+    priv->conf.dfilter = 0;
+    priv->conf.direct_msec = 1000;
+    priv->conf.startmode = OPMODE_IDLE;
+
+    return E_SUCCESS;
+}
+
+/** Finalize unit set-up */
+error_t UFCAP_init(Unit *unit)
+{
+    bool suc = true;
+    struct priv *priv = unit->data;
+
+    // ---- Resolve what to configure ----
+
+    TIM_TypeDef * const TIMx = TIM2;
+    Resource timRsc = R_TIM2;
+
+    TIM_TypeDef * const TIMy = TIM14;
+    Resource tim2Rsc = R_TIM14;
+
+    uint32_t ll_ch_a = 0;
+    uint32_t ll_ch_b = 0;
+
+    switch (priv->conf.signal_pname) {
+        case 'A':
+            switch (priv->conf.signal_pnum) {
+                case 5:
+                case 15:
+                case 0: ll_ch_a = LL_TIM_CHANNEL_CH1; break;
+                case 1: ll_ch_a = LL_TIM_CHANNEL_CH2; break;
+                default:
+                    dbg("Bad signal pin!");
+                    return E_BAD_CONFIG;
+            }
+            break;
+        case 'B':
+            switch (priv->conf.signal_pnum) {
+                case 3: ll_ch_a = LL_TIM_CHANNEL_CH2; break;
+                default:
+                    dbg("Bad signal pin!");
+                    return E_BAD_CONFIG;
+            }
+            break;
+
+        default:
+            dbg("Bad signal pin port!");
+            return E_BAD_CONFIG;
+    }
+    const uint32_t ll_timpin_af = LL_GPIO_AF_2;
+
+    bool a_direct = true;
+    switch (ll_ch_a) {
+        case LL_TIM_CHANNEL_CH1:
+            ll_ch_b = LL_TIM_CHANNEL_CH2;
+            break;
+
+        case LL_TIM_CHANNEL_CH2:
+            ll_ch_b = LL_TIM_CHANNEL_CH1;
+            a_direct = false;
+            break;
+    }
+
+    // ---- CLAIM ----
+
+    TRY(rsc_claim_pin(unit, priv->conf.signal_pname, priv->conf.signal_pnum));
+    TRY(rsc_claim(unit, timRsc));
+    TRY(rsc_claim(unit, tim2Rsc));
+
+    // ---- INIT ----
+    assert_param(ll_ch_a != ll_ch_b);
+
+    priv->TIMx = TIMx;
+    priv->TIMy = TIMy;
+    priv->ll_ch_a = ll_ch_a;
+    priv->ll_ch_b = ll_ch_b;
+    priv->a_direct = a_direct;
+
+    // Load defaults
+    priv->active_level = priv->conf.active_level;
+    priv->direct_presc = priv->conf.direct_presc;
+    priv->dfilter = priv->conf.dfilter;
+    priv->direct_msec = priv->conf.direct_msec;
+    priv->opmode = priv->conf.startmode;
+
+    TRY(hw_configure_gpio_af(priv->conf.signal_pname, priv->conf.signal_pnum, ll_timpin_af));
+
+    GPIO_TypeDef *gpio = hw_port2periph(priv->conf.signal_pname, &suc);
+    uint32_t ll_pin = hw_pin2ll(priv->conf.signal_pnum, &suc);
+    LL_GPIO_SetPinPull(gpio, ll_pin, LL_GPIO_PULL_DOWN); // XXX change to pull-up if the polarity is inverted
+
+    hw_periph_clock_enable(TIMx);
+    hw_periph_clock_enable(TIMy);
+    irqd_attach(TIMx, UFCAP_TIMxHandler, unit);
+    irqd_attach(TIMy, UFCAP_TIMyHandler, unit);
+
+    UFCAP_SwitchMode(unit, priv->opmode); // switch to the default opmode
+
+    return E_SUCCESS;
+}
+
+/** Tear down the unit */
+void UFCAP_deInit(Unit *unit)
+{
+    struct priv *priv = unit->data;
+
+    // de-init peripherals
+    if (unit->status == E_SUCCESS ) {
+        UFCAP_SwitchMode(unit, OPMODE_IDLE);
+
+        TIM_TypeDef *TIMx = priv->TIMx;
+        TIM_TypeDef *TIMy = priv->TIMy;
+        LL_TIM_DeInit(TIMx);
+        LL_TIM_DeInit(TIMy);
+        irqd_detach(TIMx, UFCAP_TIMxHandler);
+        irqd_detach(TIMy, UFCAP_TIMyHandler);
+        hw_periph_clock_disable(TIMx);
+        hw_periph_clock_disable(TIMy);
+    }
+
+    // Release all resources, deinit pins
+    rsc_teardown(unit);
+
+    // Free memory
+    free_ck(unit->data);
+}

units/fcap/_fcap_internal.h

@@ -0,0 +1,117 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#ifndef GEX_F072_FCAP_INTERNAL_H
+#define GEX_F072_FCAP_INTERNAL_H
+
+#ifndef FCAP_INTERNAL
+#error bad include!
+#endif
+
+#include "unit_base.h"
+
+enum fcap_opmode {
+    OPMODE_IDLE = 0,
+    OPMODE_BUSY = 1, // used after capture is done, before it's reported
+    OPMODE_INDIRECT_CONT = 2,
+    OPMODE_INDIRECT_BURST = 3, // averaging
+    OPMODE_DIRECT_CONT = 4,
+    OPMODE_DIRECT_BURST = 5,
+    OPMODE_FREE_COUNTER = 6,
+    OPMODE_SINGLE_PULSE = 7,
+};
+
+/** Private data structure */
+struct priv {
+    // settings
+    struct {
+        char signal_pname;   // the input pin - one of TIM2 channels
+        uint8_t signal_pnum;
+
+        bool active_level;
+        uint8_t direct_presc;
+        uint8_t dfilter;
+        uint16_t direct_msec;
+
+        enum fcap_opmode startmode;
+    } conf;
+
+    // internal state
+    TIM_TypeDef *TIMx;
+    TIM_TypeDef *TIMy; // used as a timebase source for TIMx in direct mode
+    uint32_t ll_ch_b;
+    uint32_t ll_ch_a;
+    bool a_direct;
+
+    enum fcap_opmode opmode;
+
+    TF_ID request_id;
+    uint8_t n_skip; //!< Periods to skip before starting the real capture
+
+    bool active_level; // in PWM mode, the first part that is measured. (if 1, HHHLLL, else LLLHHH). In direct mode, clock polarity
+    uint8_t direct_presc;
+    uint16_t direct_msec;
+    uint8_t dfilter;
+
+    union {
+        struct {
+            uint32_t ontime; // length of the captured positive pulse in the current interval
+            uint32_t last_period; //!< length of the captured interval between two rising edges
+            uint32_t last_ontime; //!< length of the last captured ontime
+        } ind_cont;
+
+        struct {
+            uint32_t ontime; // length of the captured positive pulse in the current interval
+            uint64_t period_acu; //!< length of the captured interval between two rising edges, sum
+            uint64_t ontime_acu; //!< length of the last captured ontime, sum
+            uint16_t n_count; //!< Periods captured
+            uint16_t n_target; //!< Periods captured - requested count
+        } ind_burst;
+
+        struct {
+            uint32_t last_count; //!< Pulse count in the last capture window
+        } dir_cont;
+
+        struct {
+            uint16_t msec; // capture window length (used in the report callback) - different from the cont time, which is a semi-persistent config
+        } dir_burst;
+    };
+};
+
+/** Allocate data structure and set defaults */
+error_t UFCAP_preInit(Unit *unit);
+
+/** Load from a binary buffer stored in Flash */
+void UFCAP_loadBinary(Unit *unit, PayloadParser *pp);
+
+/** Write to a binary buffer for storing in Flash */
+void UFCAP_writeBinary(Unit *unit, PayloadBuilder *pb);
+
+// ------------------------------------------------------------------------
+
+/** Parse a key-value pair from the INI file */
+error_t UFCAP_loadIni(Unit *unit, const char *key, const char *value);
+
+/** Generate INI file section for the unit */
+void UFCAP_writeIni(Unit *unit, IniWriter *iw);
+
+// ------------------------------------------------------------------------
+
+/** Finalize unit set-up */
+error_t UFCAP_init(Unit *unit);
+
+/** Tear down the unit */
+void UFCAP_deInit(Unit *unit);
+
+// ------------------------------------------------------------------------
+
+void UFCAP_SwitchMode(Unit *unit, enum fcap_opmode opmode);
+
+void UFCAP_TIMxHandler(void *arg);
+void UFCAP_TIMyHandler(void *arg);
+
+uint32_t UFCAP_GetFreeCounterValue(Unit *unit);
+uint32_t UFCAP_FreeCounterClear(Unit *unit);
+
+#endif //GEX_F072_FCAP_INTERNAL_H

units/fcap/_fcap_settings.c

@@ -0,0 +1,114 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+
+#define FCAP_INTERNAL
+#include "_fcap_internal.h"
+
+/** Load from a binary buffer stored in Flash */
+void UFCAP_loadBinary(Unit *unit, PayloadParser *pp)
+{
+    struct priv *priv = unit->data;
+
+    uint8_t version = pp_u8(pp);
+    (void)version;
+
+    priv->conf.signal_pname = pp_char(pp);
+    priv->conf.signal_pnum = pp_u8(pp);
+    priv->conf.active_level = pp_bool(pp);
+    priv->conf.dfilter = pp_u8(pp);
+    priv->conf.direct_presc = pp_u8(pp);
+    priv->conf.direct_msec = pp_u16(pp);
+    priv->conf.startmode = (enum fcap_opmode) pp_u8(pp);
+}
+
+/** Write to a binary buffer for storing in Flash */
+void UFCAP_writeBinary(Unit *unit, PayloadBuilder *pb)
+{
+    struct priv *priv = unit->data;
+
+    pb_u8(pb, 0); // version
+
+    pb_char(pb, priv->conf.signal_pname);
+    pb_u8(pb, priv->conf.signal_pnum);
+    pb_bool(pb, priv->conf.active_level);
+    pb_u8(pb, priv->conf.dfilter);
+    pb_u8(pb, priv->conf.direct_presc);
+    pb_u16(pb, priv->conf.direct_msec);
+    pb_u8(pb, priv->conf.startmode);
+}
+
+// ------------------------------------------------------------------------
+
+/** Parse a key-value pair from the INI file */
+error_t UFCAP_loadIni(Unit *unit, const char *key, const char *value)
+{
+    bool suc = true;
+    struct priv *priv = unit->data;
+
+    if (streq(key, "pin")) {
+        suc = cfg_portpin_parse(value, &priv->conf.signal_pname, &priv->conf.signal_pnum);
+    }
+    else if (streq(key, "active-level")) {
+        priv->conf.active_level = cfg_bool_parse(value, &suc);
+    }
+    else if (streq(key, "input-filter")) {
+        priv->conf.dfilter = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "direct-presc")) {
+        priv->conf.direct_presc = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "direct-time")) {
+        priv->conf.direct_msec = cfg_u16_parse(value, &suc);
+    }
+    else if (streq(key, "initial-mode")) {
+        priv->conf.startmode = (enum fcap_opmode) cfg_enum4_parse(value,
+                                                                  "N", OPMODE_IDLE,
+                                                                  "I", OPMODE_INDIRECT_CONT,
+                                                                  "D", OPMODE_DIRECT_CONT,
+                                                                  "F", OPMODE_FREE_COUNTER,
+                                                                  &suc);
+    }
+    else{
+        return E_BAD_KEY;
+    }
+
+    if (!suc) return E_BAD_VALUE;
+    return E_SUCCESS;
+}
+
+/** Generate INI file section for the unit */
+void UFCAP_writeIni(Unit *unit, IniWriter *iw)
+{
+    struct priv *priv = unit->data;
+
+    iw_comment(iw, "Signal input pin - one of:");
+    iw_comment(iw, " Full support:  A0, A5, A15");
+    iw_comment(iw, " Indirect only: A1, B3");
+    iw_entry(iw, "pin", "%c%d", priv->conf.signal_pname,  priv->conf.signal_pnum);
+    iw_cmt_newline(iw);
+
+    iw_comment(iw, "Active level or edge (0-low,falling; 1-high,rising)");
+    iw_entry_d(iw, "active-level", priv->conf.active_level);
+
+    iw_comment(iw, "Input filtering (0-15)");
+    iw_entry_d(iw, "input-filter", priv->conf.dfilter);
+
+    iw_comment(iw, "Pulse counter pre-divider (1,2,4,8)");
+    iw_entry_d(iw, "direct-presc", priv->conf.direct_presc);
+
+    iw_comment(iw, "Pulse counting interval (ms)");
+    iw_entry_d(iw, "direct-time", priv->conf.direct_msec);
+    iw_cmt_newline(iw);
+
+    iw_comment(iw, "Mode on startup: N-none, I-indirect, D-direct, F-free count");
+    iw_entry_s(iw, "initial-mode", cfg_enum4_encode(priv->conf.startmode,
+                                                  OPMODE_IDLE, "N",
+                                                  OPMODE_INDIRECT_CONT, "I",
+                                                  OPMODE_DIRECT_CONT, "D",
+                                                  OPMODE_FREE_COUNTER, "F"));
+}
+

units/fcap/unit_fcap.c

@@ -0,0 +1,322 @@
+//
+// Created by MightyPork on 2017/11/25.
+//
+
+#include "unit_base.h"
+#include "unit_fcap.h"
+
+#define FCAP_INTERNAL
+#include "_fcap_internal.h"
+
+// ------------------------------------------------------------------------
+
+enum FcapCmd_ {
+    CMD_STOP = 0,
+
+    // Measuring a waveform
+    CMD_INDIRECT_CONT_START = 1,  // keep measuring, read on demand
+    CMD_INDIRECT_BURST_START = 2, // wait and reply
+
+    // Counting pulses
+    CMD_DIRECT_CONT_START = 3,  // keep measuring, read on demand
+    CMD_DIRECT_BURST_START = 4, // wait and reply
+    CMD_FREECOUNT_START = 5,    // keep counting pulses until stopped, read on reply
+
+    CMD_MEASURE_SINGLE_PULSE = 6, // measure the first incoming pulse of the right polarity. NOTE: can glitch if the signal starts in the active level
+    CMD_FREECOUNT_CLEAR = 7, // clear the free counter, return last value
+
+    // Results readout for continuous modes
+    CMD_INDIRECT_CONT_READ = 10,
+    CMD_DIRECT_CONT_READ = 11,
+    CMD_FREECOUNT_READ = 12,
+
+    // configs
+    CMD_SET_POLARITY = 20,
+    CMD_SET_DIR_PRESC = 21,
+    CMD_SET_INPUT_FILTER = 22,
+    CMD_SET_DIR_MSEC = 23,
+
+    // go back to the configured settings
+    CMD_RESTORE_DEFAULTS = 30,
+};
+
+/** Handle a request message */
+static error_t UFCAP_handleRequest(Unit *unit, TF_ID frame_id, uint8_t command, PayloadParser *pp)
+{
+    uint8_t presc;
+    uint16_t msec;
+
+    struct priv *priv = unit->data;
+    PayloadBuilder pb = pb_start(unit_tmp512, UNIT_TMP_LEN, NULL);
+    const char* msg_denied_on_pin = "Not available on the selected pin!";
+
+    switch (command) {
+        /**
+         * Stop any ongoing measurement and return to base state.
+         */
+        case CMD_STOP:
+            UFCAP_SwitchMode(unit, OPMODE_IDLE);
+            return E_SUCCESS;
+
+        // ----------------------- CONFIG --------------------------
+
+        /**
+         * Set the active polarity, or triggering edge (for direct)
+         *
+         * pld: pol:u8 (0,1)
+         */
+        case CMD_SET_POLARITY:
+            {
+                priv->active_level = pp_bool(pp);
+            }
+            return E_SUCCESS;
+
+        /**
+         * Set the direct measurement prescaller 1,2,4,8
+         *
+         * pld: presc:u8
+         */
+        case CMD_SET_DIR_PRESC:
+            {
+                presc = pp_u8(pp);
+                if (presc != 1 && presc != 2 && presc != 4 && presc != 8) return E_BAD_VALUE;
+                priv->direct_presc = presc;
+            }
+            return E_SUCCESS;
+
+        /**
+         * Set the input filter for all modes
+         *
+         * pld: filter:u8 (0-15)
+         */
+        case CMD_SET_INPUT_FILTER:
+            {
+                uint8_t input_filter = pp_u8(pp);
+                if (input_filter >= 16) return E_BAD_VALUE;
+                priv->dfilter = input_filter;
+            }
+            return E_SUCCESS;
+
+        /**
+         * Set the direct sampling time.
+         *
+         * pld: msec:u16
+         */
+        case CMD_SET_DIR_MSEC:
+            {
+                msec = pp_u16(pp);
+                priv->direct_msec = msec;
+            }
+            return E_SUCCESS;
+
+        /**
+         * Reset all SET* settings to their default values, stop any ongoing measure.
+         */
+        case CMD_RESTORE_DEFAULTS:
+            UFCAP_SwitchMode(unit, OPMODE_IDLE);
+
+            priv->active_level = priv->conf.active_level;
+            priv->direct_presc = priv->conf.direct_presc;
+            priv->direct_msec = priv->conf.direct_msec;
+            priv->dfilter = priv->conf.dfilter;
+            return E_SUCCESS;
+
+        // ------------------ COMMANDS ------------------------
+
+        /**
+         * Start indirect continuous measurement.
+         */
+        case CMD_INDIRECT_CONT_START:
+            if (priv->opmode == OPMODE_INDIRECT_CONT) return E_SUCCESS; // no-op
+            if (priv->opmode != OPMODE_IDLE) return E_BUSY;
+
+            UFCAP_SwitchMode(unit, OPMODE_INDIRECT_CONT);
+            return E_SUCCESS;
+
+        /**
+         * Start a continuous direct measurement (counting pulses in fixed time intervals)
+         *
+         * - meas_time_ms 0 = no change
+         * - prescaller 0 = no change
+         *
+         * pld: meas_time_ms:u16, prescaller:u8
+         * - prescaller is 1,2,4,8; 0 = no change
+         */
+        case CMD_DIRECT_CONT_START:
+            if (!priv->a_direct) {
+                // This works only if we use the ETR pin. TIM2 shares CH1 with ETR.
+                // If CH2 is selected as input, ETR is not available.
+                com_respond_str(MSG_ERROR, frame_id, msg_denied_on_pin);
+                return E_FAILURE;
+            }
+            if (priv->opmode == OPMODE_DIRECT_CONT) return E_SUCCESS; // no-op
+            if (priv->opmode != OPMODE_IDLE) return E_BUSY;
+
+            msec = pp_u16(pp);
+            presc = pp_u8(pp);
+            if (msec != 0) priv->direct_msec = msec;
+            if (presc != 0) priv->direct_presc = presc;
+
+            UFCAP_SwitchMode(unit, OPMODE_DIRECT_CONT);
+            return E_SUCCESS;
+
+        /**
+         * Start a burst of direct measurements with averaging.
+         * The measurement is performed on N consecutive pulses.
+         *
+         * pld: count:u16
+         *
+         * resp: core_mhz:u16, count:u16, period_sum:u64, ontime_sum:u64
+         */
+        case CMD_INDIRECT_BURST_START:
+            if (priv->opmode != OPMODE_IDLE) return E_BAD_MODE;
+
+            priv->ind_burst.n_target = pp_u16(pp);
+            priv->request_id = frame_id;
+            UFCAP_SwitchMode(unit, OPMODE_INDIRECT_BURST);
+            return E_SUCCESS;
+
+        /**
+         * Start a single direct measurement of the given length (pulses in time period)
+         * If 'prescaller' is not 0, it is changed via the param field.
+         *
+         * pld: meas_time_ms:u16, prescaller:u8
+         * - prescaller is 1,2,4,8; 0 = no change
+         *
+         * resp: prescaller:u8, meas_time_ms:u16, pulse_count:u32
+         */
+        case CMD_DIRECT_BURST_START:
+            if (priv->opmode != OPMODE_IDLE) return E_BAD_MODE;
+
+            priv->dir_burst.msec = pp_u16(pp);
+
+            presc = pp_u8(pp);
+            if (presc != 0) priv->direct_presc = presc;
+
+            priv->request_id = frame_id;
+            UFCAP_SwitchMode(unit, OPMODE_DIRECT_BURST);
+            return E_SUCCESS;
+
+        /**
+         * Measure a single pulse length of the given polarity.
+         * Measures time from a rising to a falling edge (or falling to rising, if polarity is 0)
+         *
+         * resp: core_mhz:u16, ontime:u32
+         */
+        case CMD_MEASURE_SINGLE_PULSE:
+            if (priv->opmode != OPMODE_IDLE) return E_BAD_MODE;
+            priv->request_id = frame_id;
+            UFCAP_SwitchMode(unit, OPMODE_SINGLE_PULSE);
+            return E_SUCCESS;
+
+        /**
+         * Start a free-running pulse counter.
+         *
+         * pld: prescaller:u8
+         * - prescaller is 1,2,4,8; 0 = no change
+         */
+        case CMD_FREECOUNT_START:
+            if (priv->opmode != OPMODE_IDLE) return E_BAD_MODE;
+
+            presc = pp_u8(pp);
+            if (presc != 0) priv->direct_presc = presc;
+
+            UFCAP_SwitchMode(unit, OPMODE_FREE_COUNTER);
+            return E_SUCCESS;
+
+        /**
+         * Reset the free-running pulse counter.
+         *
+         * resp: last_val:u32
+         */
+        case CMD_FREECOUNT_CLEAR:
+            if (priv->opmode != OPMODE_FREE_COUNTER) {
+                return E_BAD_MODE;
+            }
+
+            pb_u32(&pb, UFCAP_FreeCounterClear(unit));
+            com_respond_pb(frame_id, MSG_SUCCESS, &pb);
+            return E_SUCCESS;
+
+        // ------------------ READING ---------------------
+
+        /**
+         * Read the most recent pulse measurement during continuous indirect measure.
+         *
+         * resp: core_mhz:u16, period:u32, ontime:u32
+         */
+        case CMD_INDIRECT_CONT_READ:
+            if (priv->opmode != OPMODE_INDIRECT_CONT) {
+                return E_BAD_MODE;
+            }
+            if (priv->ind_cont.last_period == 0) {
+                return E_BUSY;
+            }
+
+            pb_u16(&pb, PLAT_AHB_MHZ);
+            pb_u32(&pb, priv->ind_cont.last_period);
+            pb_u32(&pb, priv->ind_cont.last_ontime);
+
+            com_respond_pb(frame_id, MSG_SUCCESS, &pb);
+            return E_SUCCESS;
+
+        /**
+         * Read the most recent result of a continuous direct measurement.
+         *
+         * resp: prescaller:u8, meas_time_ms:u16, pulse_count:u32
+         */
+        case CMD_DIRECT_CONT_READ:
+            if (!priv->a_direct) { // see above
+                com_respond_str(MSG_ERROR, frame_id, msg_denied_on_pin);
+                return E_FAILURE;
+            }
+            if (priv->opmode != OPMODE_DIRECT_CONT) return E_BAD_MODE;
+            if (priv->dir_cont.last_count == 0) return E_BUSY;
+
+            pb_u8(&pb, priv->direct_presc);
+            pb_u16(&pb, priv->direct_msec);
+            pb_u32(&pb, priv->dir_cont.last_count);
+
+            com_respond_pb(frame_id, MSG_SUCCESS, &pb);
+            return E_SUCCESS;
+
+        /**
+         * Read the current value of the free-running pulse counter.
+         *
+         * The timing may have a significant jitter, this function is practically useful only for
+         * slow pulse sources (like a geiger counter, item counting etc)
+         *
+         * resp: count:u32
+         */
+        case CMD_FREECOUNT_READ:
+            if (priv->opmode != OPMODE_FREE_COUNTER) {
+                return E_BAD_MODE;
+            }
+
+            pb_u32(&pb, UFCAP_GetFreeCounterValue(unit));
+            com_respond_pb(frame_id, MSG_SUCCESS, &pb);
+            return E_SUCCESS;
+
+        default:
+            return E_UNKNOWN_COMMAND;
+    }
+}
+
+// ------------------------------------------------------------------------
+
+/** Frequency capture */
+const UnitDriver UNIT_FCAP = {
+    .name = "FCAP",
+    .description = "Frequency and pulse measurement",
+    // Settings
+    .preInit = UFCAP_preInit,
+    .cfgLoadBinary = UFCAP_loadBinary,
+    .cfgWriteBinary = UFCAP_writeBinary,
+    .cfgLoadIni = UFCAP_loadIni,
+    .cfgWriteIni = UFCAP_writeIni,
+    // Init
+    .init = UFCAP_init,
+    .deInit = UFCAP_deInit,
+    // Function
+    .handleRequest = UFCAP_handleRequest,
+};

units/fcap/unit_fcap.h

@@ -0,0 +1,16 @@
+//
+// Created by MightyPork on 2017/11/25.
+//
+// Digital input unit; single or multiple pin read access on one port (A-F)
+//
+
+#ifndef U_FCAP_H
+#define U_FCAP_H
+
+#include "unit.h"
+
+extern const UnitDriver UNIT_FCAP;
+
+// UU_ prototypes
+
+#endif //U_FCAP_H

units/i2c/_i2c_settings.c

@@ -20,18 +20,15 @@ void UI2C_loadBinary(Unit *unit, PayloadParser *pp)
     priv->anf = pp_bool(pp);
     priv->dnf = pp_u8(pp);
     priv->speed = pp_u8(pp);
-
-    if (version >= 1) {
     priv->remap = pp_u8(pp);
 }
-}
 
 /** Write to a binary buffer for storing in Flash */
 void UI2C_writeBinary(Unit *unit, PayloadBuilder *pb)
 {
     struct priv *priv = unit->data;
 
-    pb_u8(pb, 1); // version
+    pb_u8(pb, 0); // version
 
     pb_u8(pb, priv->periph_num);
     pb_bool(pb, priv->anf);
@@ -49,19 +46,19 @@ error_t UI2C_loadIni(Unit *unit, const char *key, const char *value)
     struct priv *priv = unit->data;
 
     if (streq(key, "device")) {
-        priv->periph_num = (uint8_t) avr_atoi(value);
+        priv->periph_num = cfg_u8_parse(value, &suc);
     }
     else if (streq(key, "remap")) {
-        priv->remap = (uint8_t) avr_atoi(value);
+        priv->remap = cfg_u8_parse(value, &suc);
     }
     else if (streq(key, "analog-filter")) {
-        priv->anf = str_parse_yn(value, &suc);
+        priv->anf = cfg_bool_parse(value, &suc);
     }
     else if (streq(key, "digital-filter")) {
-        priv->dnf = (uint8_t) avr_atoi(value);
+        priv->dnf = cfg_u8_parse(value, &suc);
     }
     else if (streq(key, "speed")) {
-        priv->speed = (uint8_t) avr_atoi(value);
+        priv->speed = cfg_u8_parse(value, &suc);
     }
     else {
         return E_BAD_KEY;
@@ -77,7 +74,7 @@ void UI2C_writeIni(Unit *unit, IniWriter *iw)
     struct priv *priv = unit->data;
 
     iw_comment(iw, "Peripheral number (I2Cx)");
-    iw_entry(iw, "device", "%d", (int)priv->periph_num);
+    iw_entry_d(iw, "device", priv->periph_num);
 
     iw_comment(iw, "Pin mappings (SCL,SDA)");
 #if GEX_PLAT_F072_DISCOVERY
@@ -92,15 +89,15 @@ void UI2C_writeIni(Unit *unit, IniWriter *iw)
 #else
     #error "BAD PLATFORM!"
 #endif
-    iw_entry(iw, "remap", "%d", (int)priv->remap);
+    iw_entry_d(iw, "remap", priv->remap);
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Speed: 1-Standard, 2-Fast, 3-Fast+");
-    iw_entry(iw, "speed", "%d", (int)priv->speed);
+    iw_entry_d(iw, "speed", priv->speed);
 
     iw_comment(iw, "Analog noise filter enable (Y,N)");
-    iw_entry(iw, "analog-filter", "%s", str_yn(priv->anf));
+    iw_entry_s(iw, "analog-filter", str_yn(priv->anf));
 
     iw_comment(iw, "Digital noise filter bandwidth (0-15)");
-    iw_entry(iw, "digital-filter", "%d", (int)priv->dnf);
+    iw_entry_d(iw, "digital-filter", priv->dnf);
 }

units/neopixel/_npx_api.c

@@ -16,7 +16,7 @@ error_t UU_Npx_Clear(Unit *unit)
     CHECK_TYPE(unit, &UNIT_NEOPIXEL);
 
     struct priv *priv = unit->data;
-    ws2812_clear(priv->port, priv->ll_pin, priv->pixels);
+    ws2812_clear(priv->port, priv->ll_pin, priv->cfg.pixels);
     return E_SUCCESS;
 }
 
@@ -26,8 +26,8 @@ error_t UU_Npx_Load(Unit *unit, const uint8_t *packed_rgb, uint32_t nbytes)
     CHECK_TYPE(unit, &UNIT_NEOPIXEL);
 
     struct priv *priv = unit->data;
-    if (nbytes != 3*priv->pixels) return E_BAD_COUNT;
-    ws2812_load_raw(priv->port, priv->ll_pin, packed_rgb, priv->pixels);
+    if (nbytes != 3*priv->cfg.pixels) return E_BAD_COUNT;
+    ws2812_load_raw(priv->port, priv->ll_pin, packed_rgb, priv->cfg.pixels);
     return E_SUCCESS;
 }
 
@@ -37,8 +37,8 @@ static error_t load_u32(Unit *unit, const uint8_t *bytes, uint32_t nbytes, bool
     CHECK_TYPE(unit, &UNIT_NEOPIXEL);
 
     struct priv *priv = unit->data;
-    if (nbytes != 4*priv->pixels) return E_BAD_COUNT;
-    ws2812_load_sparse(priv->port, priv->ll_pin, bytes, priv->pixels, bige);
+    if (nbytes != 4*priv->cfg.pixels) return E_BAD_COUNT;
+    ws2812_load_sparse(priv->port, priv->ll_pin, bytes, priv->cfg.pixels, bige);
     return E_SUCCESS;
 }
 
@@ -60,6 +60,6 @@ error_t UU_Npx_GetCount(Unit *unit, uint16_t *count)
     CHECK_TYPE(unit, &UNIT_NEOPIXEL);
 
     struct priv *priv = unit->data;
-    *count = priv->pixels;
+    *count = priv->cfg.pixels;
     return E_SUCCESS;
 }

units/neopixel/_npx_init.c

@@ -16,9 +16,8 @@ error_t Npx_preInit(Unit *unit)
     if (priv == NULL) return E_OUT_OF_MEM;
 
     // some defaults
-    priv->pin_number = 0;
-    priv->port_name = 'A';
-    priv->pixels = 1;
+    priv->cfg.pin = R_PA0;
+    priv->cfg.pixels = 1;
 
     return E_SUCCESS;
 }
@@ -30,13 +29,9 @@ error_t Npx_init(Unit *unit)
     struct priv *priv = unit->data;
 
     // --- Parse config ---
-    priv->ll_pin = hw_pin2ll(priv->pin_number, &suc);
-    priv->port = hw_port2periph(priv->port_name, &suc);
-    Resource rsc = hw_pin2resource(priv->port_name, priv->pin_number, &suc);
+    suc = hw_pinrsc2ll(priv->cfg.pin, &priv->port, &priv->ll_pin);
     if (!suc) return E_BAD_CONFIG;
-
-    // --- Claim resources ---
-    TRY(rsc_claim(unit, rsc));
+    TRY(rsc_claim(unit, priv->cfg.pin));
 
     // --- Init hardware ---
     LL_GPIO_SetPinMode(priv->port, priv->ll_pin, LL_GPIO_MODE_OUTPUT);
@@ -45,7 +40,7 @@ error_t Npx_init(Unit *unit)
 
     // clear strip
 
-    ws2812_clear(priv->port, priv->ll_pin, priv->pixels);
+    ws2812_clear(priv->port, priv->ll_pin, priv->cfg.pixels);
 
     return E_SUCCESS;
 }

units/neopixel/_npx_internal.h

@@ -13,9 +13,10 @@
 
 /** Private data structure */
 struct priv {
-    char port_name;
-    uint8_t pin_number;
+    struct {
+        Resource pin;
         uint16_t pixels;
+    } cfg;
 
     uint32_t ll_pin;
     GPIO_TypeDef *port;

units/neopixel/_npx_settings.c

@@ -13,9 +13,8 @@ void Npx_loadBinary(Unit *unit, PayloadParser *pp)
 {
     struct priv *priv = unit->data;
 
-    priv->port_name = pp_char(pp);
-    priv->pin_number = pp_u8(pp);
-    priv->pixels = pp_u16(pp);
+    priv->cfg.pin = (Resource) pp_u8(pp);
+    priv->cfg.pixels = pp_u16(pp);
 }
 
 /** Write to a binary buffer for storing in Flash */
@@ -23,9 +22,8 @@ void Npx_writeBinary(Unit *unit, PayloadBuilder *pb)
 {
     struct priv *priv = unit->data;
 
-    pb_char(pb, priv->port_name);
-    pb_u8(pb, priv->pin_number);
-    pb_u16(pb, priv->pixels);
+    pb_u8(pb, priv->cfg.pin);
+    pb_u16(pb, priv->cfg.pixels);
 }
 
 // ------------------------------------------------------------------------
@@ -37,10 +35,10 @@ error_t Npx_loadIni(Unit *unit, const char *key, const char *value)
     struct priv *priv = unit->data;
 
     if (streq(key, "pin")) {
-        suc = parse_pin(value, &priv->port_name, &priv->pin_number);
+        priv->cfg.pin = cfg_pinrsc_parse(value, &suc);
     }
     else if (streq(key, "pixels")) {
-        priv->pixels = (uint16_t) avr_atoi(value);
+        priv->cfg.pixels = cfg_u16_parse(value, &suc);
     }
     else {
         return E_BAD_KEY;
@@ -56,8 +54,8 @@ void Npx_writeIni(Unit *unit, IniWriter *iw)
     struct priv *priv = unit->data;
 
     iw_comment(iw, "Data pin");
-    iw_entry(iw, "pin", "%c%d", priv->port_name,  priv->pin_number);
+    iw_entry_s(iw, "pin", cfg_pinrsc_encode(priv->cfg.pin));
 
     iw_comment(iw, "Number of pixels");
-    iw_entry(iw, "pixels", "%d", priv->pixels);
+    iw_entry_d(iw, "pixels", priv->cfg.pixels);
 }

units/simple_pwm/_pwmdim_api.c

@@ -0,0 +1,64 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+#include "unit_pwmdim.h"
+
+#define PWMDIM_INTERNAL
+#include "_pwmdim_internal.h"
+
+error_t UPWMDIM_SetFreq(Unit *unit, uint32_t freq)
+{
+    struct priv *priv = unit->data;
+
+    uint16_t presc;
+    uint32_t count;
+    float real_freq;
+    if (!hw_solve_timer(PLAT_APB1_HZ, freq, true, &presc, &count, &real_freq)) {
+        dbg("Failed to resolve timer params.");
+        return E_BAD_VALUE;
+    }
+    LL_TIM_SetPrescaler(priv->TIMx, (uint32_t) (presc - 1));
+    LL_TIM_SetAutoReload(priv->TIMx, count - 1);
+
+    // we must re-calculate duty cycles because they are absolute related to the ARR which we just changed
+    UPWMDIM_SetDuty(unit, 0, priv->duty1);
+    UPWMDIM_SetDuty(unit, 1, priv->duty2);
+    UPWMDIM_SetDuty(unit, 2, priv->duty3);
+    UPWMDIM_SetDuty(unit, 3, priv->duty4);
+
+//    LL_TIM_GenerateEvent_UPDATE(priv->TIMx); // - this appears to cause jumpiness
+    priv->freq = freq;
+
+    return E_SUCCESS;
+}
+
+error_t UPWMDIM_SetDuty(Unit *unit, uint8_t ch, uint16_t duty1000)
+{
+    struct priv *priv = unit->data;
+
+    uint32_t cnt = (LL_TIM_GetAutoReload(priv->TIMx) + 1)*duty1000 / 1000;
+
+    if (ch == 0) {
+        priv->duty1 = duty1000;
+        LL_TIM_OC_SetCompareCH1(priv->TIMx, cnt);
+    }
+    else if (ch == 1) {
+        priv->duty2 = duty1000;
+        LL_TIM_OC_SetCompareCH2(priv->TIMx, cnt);
+    }
+    else if (ch == 2) {
+        priv->duty3 = duty1000;
+        LL_TIM_OC_SetCompareCH3(priv->TIMx, cnt);
+    }
+    else if (ch == 3) {
+        priv->duty4 = duty1000;
+        LL_TIM_OC_SetCompareCH4(priv->TIMx, cnt);
+    } else {
+        return E_BAD_VALUE;
+    }
+
+    return E_SUCCESS;
+}

units/simple_pwm/_pwmdim_init.c

@@ -0,0 +1,170 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+
+#define PWMDIM_INTERNAL
+#include "_pwmdim_internal.h"
+
+/** Allocate data structure and set defaults */
+error_t UPWMDIM_preInit(Unit *unit)
+{
+    struct priv *priv = unit->data = calloc_ck(1, sizeof(struct priv));
+    if (priv == NULL) return E_OUT_OF_MEM;
+
+    priv->cfg.freq = 1000;
+    priv->cfg.ch1_choice = 1;
+    priv->cfg.ch2_choice = 0;
+    priv->cfg.ch3_choice = 0;
+    priv->cfg.ch4_choice = 0;
+
+    priv->duty1 = 500;
+    priv->duty2 = 500;
+    priv->duty3 = 500;
+    priv->duty4 = 500;
+
+    return E_SUCCESS;
+}
+
+/** Finalize unit set-up */
+error_t UPWMDIM_init(Unit *unit)
+{
+    bool suc = true;
+    struct priv *priv = unit->data;
+
+    TRY(rsc_claim(unit, R_TIM3));
+    priv->TIMx = TIM3;
+    hw_periph_clock_enable(priv->TIMx);
+
+    // copy the default frequency
+    priv->freq = priv->cfg.freq;
+
+    const Resource ch1_pins[] = { R_PA6, R_PB4, R_PC6 };
+    const uint32_t ch1_af[]   = { LL_GPIO_AF_1, LL_GPIO_AF_1, LL_GPIO_AF_0 };
+
+    const Resource ch2_pins[] = { R_PA7, R_PB5, R_PC7 };
+    const uint32_t ch2_af[]   = { LL_GPIO_AF_1, LL_GPIO_AF_1, LL_GPIO_AF_0 };
+
+    const Resource ch3_pins[] = { R_PB0, R_PC8 };
+    const uint32_t ch3_af[]   = { LL_GPIO_AF_1, LL_GPIO_AF_0 };
+
+    const Resource ch4_pins[] = { R_PB1, R_PC9 };
+    const uint32_t ch4_af[]   = { LL_GPIO_AF_1, LL_GPIO_AF_0 };
+
+    Resource r[4] = {};
+    uint32_t af[4] = {};
+
+    // --- resolve pins and AFs ---
+    if (priv->cfg.ch1_choice > 0) {
+        if (priv->cfg.ch1_choice > 3) return E_BAD_CONFIG;
+        r[0] = ch1_pins[priv->cfg.ch1_choice - 1];
+        af[0] = ch1_af[priv->cfg.ch1_choice - 1];
+        TRY(rsc_claim(unit, r[0]));
+    }
+
+    if (priv->cfg.ch2_choice > 0) {
+        if (priv->cfg.ch2_choice > 3) return E_BAD_CONFIG;
+        r[1] = ch2_pins[priv->cfg.ch2_choice - 1];
+        af[1] = ch2_af[priv->cfg.ch2_choice - 1];
+        TRY(rsc_claim(unit, r[1]));
+    }
+
+    if (priv->cfg.ch3_choice > 0) {
+        if (priv->cfg.ch3_choice > 2) return E_BAD_CONFIG;
+        r[2] = ch3_pins[priv->cfg.ch3_choice - 1];
+        af[2] = ch3_af[priv->cfg.ch3_choice - 1];
+        TRY(rsc_claim(unit, r[2]));
+    }
+
+    if (priv->cfg.ch4_choice > 0) {
+        if (priv->cfg.ch4_choice > 2) return E_BAD_CONFIG;
+        r[3] = ch4_pins[priv->cfg.ch4_choice - 1];
+        af[3] = ch4_af[priv->cfg.ch4_choice - 1];
+        TRY(rsc_claim(unit, r[3]));
+    }
+
+    // --- configure AF + timer ---
+    LL_TIM_DeInit(priv->TIMx); // force a reset
+
+    uint16_t presc;
+    uint32_t count;
+    float real_freq;
+    if (!hw_solve_timer(PLAT_APB1_HZ, priv->freq, true, &presc, &count, &real_freq)) {
+        dbg("Failed to resolve timer params.");
+        return E_BAD_VALUE;
+    }
+    LL_TIM_SetPrescaler(priv->TIMx, (uint32_t) (presc - 1));
+    LL_TIM_SetAutoReload(priv->TIMx, count - 1);
+    LL_TIM_EnableARRPreload(priv->TIMx);
+
+    dbg("Presc %d, cnt %d", (int)presc, (int)count);
+
+    // TODO this can probably be turned into a loop over an array of structs
+
+
+    if (priv->cfg.ch1_choice > 0) {
+        TRY(hw_configure_gpiorsc_af(r[0], af[0]));
+
+        LL_TIM_OC_EnablePreload(priv->TIMx, LL_TIM_CHANNEL_CH1);
+        LL_TIM_OC_SetMode(priv->TIMx, LL_TIM_CHANNEL_CH1, LL_TIM_OCMODE_PWM1);
+        LL_TIM_OC_SetCompareCH1(priv->TIMx, count/2);
+        LL_TIM_CC_EnablePreload(priv->TIMx);
+        LL_TIM_CC_EnableChannel(priv->TIMx, LL_TIM_CHANNEL_CH1);
+    }
+
+    if (priv->cfg.ch2_choice > 0) {
+        TRY(hw_configure_gpiorsc_af(r[1], af[1]));
+
+        LL_TIM_OC_EnablePreload(priv->TIMx, LL_TIM_CHANNEL_CH2);
+        LL_TIM_OC_SetMode(priv->TIMx, LL_TIM_CHANNEL_CH2, LL_TIM_OCMODE_PWM1);
+        LL_TIM_OC_SetCompareCH2(priv->TIMx, count/2);
+        LL_TIM_CC_EnableChannel(priv->TIMx, LL_TIM_CHANNEL_CH2);
+    }
+
+    if (priv->cfg.ch3_choice > 0) {
+        TRY(hw_configure_gpiorsc_af(r[2], af[2]));
+
+        LL_TIM_OC_EnablePreload(priv->TIMx, LL_TIM_CHANNEL_CH3);
+        LL_TIM_OC_SetMode(priv->TIMx, LL_TIM_CHANNEL_CH3, LL_TIM_OCMODE_PWM1);
+        LL_TIM_OC_SetCompareCH3(priv->TIMx, count/2);
+        LL_TIM_CC_EnableChannel(priv->TIMx, LL_TIM_CHANNEL_CH3);
+    }
+
+    if (priv->cfg.ch4_choice > 0) {
+        TRY(hw_configure_gpiorsc_af(r[3], af[3]));
+
+        LL_TIM_OC_EnablePreload(priv->TIMx, LL_TIM_CHANNEL_CH4);
+        LL_TIM_OC_SetMode(priv->TIMx, LL_TIM_CHANNEL_CH4, LL_TIM_OCMODE_PWM1);
+        LL_TIM_OC_SetCompareCH4(priv->TIMx, count/2);
+        LL_TIM_CC_EnableChannel(priv->TIMx, LL_TIM_CHANNEL_CH4);
+    }
+
+    LL_TIM_GenerateEvent_UPDATE(priv->TIMx);
+    LL_TIM_EnableAllOutputs(priv->TIMx);
+
+    // postpone this for later - when user uses the start command.
+    // prevents beeping right after restart if used for audio.
+//    LL_TIM_EnableCounter(priv->TIMx);
+
+    return E_SUCCESS;
+}
+
+
+/** Tear down the unit */
+void UPWMDIM_deInit(Unit *unit)
+{
+    struct priv *priv = unit->data;
+
+    // de-init peripherals
+    if (unit->status == E_SUCCESS ) {
+        LL_TIM_DeInit(priv->TIMx);
+    }
+
+    // Release all resources, deinit pins
+    rsc_teardown(unit);
+
+    // Free memory
+    free_ck(unit->data);
+}

units/simple_pwm/_pwmdim_internal.h

@@ -0,0 +1,65 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#ifndef GEX_F072_PWMDIM_INTERNAL_H
+#define GEX_F072_PWMDIM_INTERNAL_H
+
+#ifndef PWMDIM_INTERNAL
+#error bad include!
+#endif
+
+#include "unit_base.h"
+
+/** Private data structure */
+struct priv {
+    // settings
+    struct {
+        uint32_t freq;
+        uint8_t ch1_choice;
+        uint8_t ch2_choice;
+        uint8_t ch3_choice;
+        uint8_t ch4_choice;
+    } cfg;
+
+    // internal state
+    uint32_t freq;
+    uint16_t duty1;
+    uint16_t duty2;
+    uint16_t duty3;
+    uint16_t duty4;
+
+    TIM_TypeDef *TIMx;
+};
+
+/** Allocate data structure and set defaults */
+error_t UPWMDIM_preInit(Unit *unit);
+
+/** Load from a binary buffer stored in Flash */
+void UPWMDIM_loadBinary(Unit *unit, PayloadParser *pp);
+
+/** Write to a binary buffer for storing in Flash */
+void UPWMDIM_writeBinary(Unit *unit, PayloadBuilder *pb);
+
+// ------------------------------------------------------------------------
+
+/** Parse a key-value pair from the INI file */
+error_t UPWMDIM_loadIni(Unit *unit, const char *key, const char *value);
+
+/** Generate INI file section for the unit */
+void UPWMDIM_writeIni(Unit *unit, IniWriter *iw);
+
+// ------------------------------------------------------------------------
+
+/** Finalize unit set-up */
+error_t UPWMDIM_init(Unit *unit);
+
+/** Tear down the unit */
+void UPWMDIM_deInit(Unit *unit);
+
+
+error_t UPWMDIM_SetFreq(Unit *unit, uint32_t freq);
+
+error_t UPWMDIM_SetDuty(Unit *unit, uint8_t ch, uint16_t duty1000);
+
+#endif //GEX_F072_PWMDIM_INTERNAL_H

units/simple_pwm/_pwmdim_settings.c

@@ -0,0 +1,89 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+
+#define PWMDIM_INTERNAL
+#include "_pwmdim_internal.h"
+
+/** Load from a binary buffer stored in Flash */
+void UPWMDIM_loadBinary(Unit *unit, PayloadParser *pp)
+{
+    struct priv *priv = unit->data;
+
+    uint8_t version = pp_u8(pp);
+    (void)version;
+
+    priv->cfg.freq = pp_u32(pp);
+    priv->cfg.ch1_choice = pp_u8(pp);
+    priv->cfg.ch2_choice = pp_u8(pp);
+    priv->cfg.ch3_choice = pp_u8(pp);
+    priv->cfg.ch4_choice = pp_u8(pp);
+}
+
+/** Write to a binary buffer for storing in Flash */
+void UPWMDIM_writeBinary(Unit *unit, PayloadBuilder *pb)
+{
+    struct priv *priv = unit->data;
+
+    pb_u8(pb, 0); // version
+
+    pb_u32(pb, priv->cfg.freq);
+    pb_u8(pb, priv->cfg.ch1_choice);
+    pb_u8(pb, priv->cfg.ch2_choice);
+    pb_u8(pb, priv->cfg.ch3_choice);
+    pb_u8(pb, priv->cfg.ch4_choice);
+}
+
+// ------------------------------------------------------------------------
+
+/** Parse a key-value pair from the INI file */
+error_t UPWMDIM_loadIni(Unit *unit, const char *key, const char *value)
+{
+    bool suc = true;
+    struct priv *priv = unit->data;
+
+    if (streq(key, "frequency")) {
+        priv->cfg.freq = cfg_u32_parse(value, &suc);
+    }
+    else if (streq(key, "ch1_pin")) {
+        priv->cfg.ch1_choice = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "ch2_pin")) {
+        priv->cfg.ch2_choice = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "ch3_pin")) {
+        priv->cfg.ch3_choice = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "ch4_pin")) {
+        priv->cfg.ch4_choice = cfg_u8_parse(value, &suc);
+    }
+    else {
+        return E_BAD_KEY;
+    }
+
+    if (!suc) return E_BAD_VALUE;
+    return E_SUCCESS;
+}
+
+/** Generate INI file section for the unit */
+void UPWMDIM_writeIni(Unit *unit, IniWriter *iw)
+{
+    struct priv *priv = unit->data;
+
+    iw_comment(iw, "Default pulse frequency (Hz)");
+    iw_entry_d(iw, "frequency", priv->cfg.freq);
+
+    iw_comment(iw, "Pin mapping - 0=disabled");
+    iw_comment(iw, "Channel1 - 1:PA6, 2:PB4, 3:PC6");
+    iw_entry_d(iw, "ch1_pin", priv->cfg.ch1_choice);
+    iw_comment(iw, "Channel2 - 1:PA7, 2:PB5, 3:PC7");
+    iw_entry_d(iw, "ch2_pin", priv->cfg.ch2_choice);
+    iw_comment(iw, "Channel3 - 1:PB0, 2:PC8");
+    iw_entry_d(iw, "ch3_pin", priv->cfg.ch3_choice);
+    iw_comment(iw, "Channel4 - 1:PB1, 2:PC9");
+    iw_entry_d(iw, "ch4_pin", priv->cfg.ch4_choice);
+}
+

units/simple_pwm/unit_pwmdim.c

@@ -0,0 +1,69 @@
+//
+// Created by MightyPork on 2017/11/25.
+//
+
+#include "unit_base.h"
+#include "unit_pwmdim.h"
+
+#define PWMDIM_INTERNAL
+#include "_pwmdim_internal.h"
+
+// ------------------------------------------------------------------------
+
+enum PwmSimpleCmd_ {
+    CMD_SET_FREQUENCY = 0,
+    CMD_SET_DUTY = 1,
+    CMD_STOP = 2,
+    CMD_START = 3,
+};
+
+/** Handle a request message */
+static error_t UPWMDIM_handleRequest(Unit *unit, TF_ID frame_id, uint8_t command, PayloadParser *pp)
+{
+    struct priv *priv = unit->data;
+
+    switch (command) {
+        case CMD_SET_FREQUENCY:
+            TRY(UPWMDIM_SetFreq(unit, pp_u32(pp)));
+            return E_SUCCESS;
+
+        case CMD_SET_DUTY:
+            for (; pp_length(pp) > 0;) {
+                uint8_t ch = pp_u8(pp);
+                uint16_t duty = pp_u16(pp);
+                TRY(UPWMDIM_SetDuty(unit, ch, duty));
+            }
+            return E_SUCCESS;
+
+        case CMD_STOP:
+            LL_TIM_DisableCounter(priv->TIMx);
+            LL_TIM_SetCounter(priv->TIMx, 0);
+            return E_SUCCESS;
+
+        case CMD_START:
+            LL_TIM_EnableCounter(priv->TIMx);
+            return E_SUCCESS;
+
+        default:
+            return E_UNKNOWN_COMMAND;
+    }
+}
+
+// ------------------------------------------------------------------------
+
+/** Simple PWM dimming output */
+const UnitDriver UNIT_PWMDIM = {
+    .name = "PWMDIM",
+    .description = "Simple PWM output",
+    // Settings
+    .preInit = UPWMDIM_preInit,
+    .cfgLoadBinary = UPWMDIM_loadBinary,
+    .cfgWriteBinary = UPWMDIM_writeBinary,
+    .cfgLoadIni = UPWMDIM_loadIni,
+    .cfgWriteIni = UPWMDIM_writeIni,
+    // Init
+    .init = UPWMDIM_init,
+    .deInit = UPWMDIM_deInit,
+    // Function
+    .handleRequest = UPWMDIM_handleRequest,
+};

units/simple_pwm/unit_pwmdim.h

@@ -0,0 +1,16 @@
+//
+// Created by MightyPork on 2017/11/25.
+//
+// Digital input unit; single or multiple pin read access on one port (A-F)
+//
+
+#ifndef U_PWMDIM_H
+#define U_PWMDIM_H
+
+#include "unit.h"
+
+extern const UnitDriver UNIT_PWMDIM;
+
+// UU_ prototypes
+
+#endif //U_PWMDIM_H

units/sipo/_sipo_api.c

@@ -43,7 +43,7 @@ error_t UU_SIPO_Write(Unit *unit, const uint8_t *buffer, uint16_t buflen, uint16
     // buffer contains data for the individual data pins, back to back as AAA BBB CCC (whole bytes)
     const uint8_t data_width = priv->data_width;
     const uint16_t bytelen = buflen / data_width;
-    const uint16_t mask = priv->data_pins;
+    const uint16_t mask = priv->cfg.data_pins;
 
     uint8_t offsets[16];
     for (int i=0; i<16; i++) offsets[i] = (uint8_t) (bytelen * i);
@@ -61,7 +61,7 @@ error_t UU_SIPO_Write(Unit *unit, const uint8_t *buffer, uint16_t buflen, uint16
             priv->data_port->BSRR = spread | (((~spread) & mask) << 16);
 
             // Shift clock pulse
-            send_pulse(priv->shift_pol, priv->shift_port, priv->shift_ll);
+            send_pulse(priv->cfg.shift_pol, priv->shift_port, priv->shift_ll);
         }
     }
 
@@ -70,7 +70,7 @@ error_t UU_SIPO_Write(Unit *unit, const uint8_t *buffer, uint16_t buflen, uint16
     uint16_t spread = pinmask_spread(terminal_data, mask);
     priv->data_port->BSRR = spread | (((~spread) & mask) << 16);
 
-    send_pulse(priv->store_pol, priv->store_port, priv->store_ll);
+    send_pulse(priv->cfg.store_pol, priv->store_port, priv->store_ll);
     return E_SUCCESS;
 }
 #pragma GCC pop_options
@@ -80,8 +80,8 @@ error_t UU_SIPO_DirectData(Unit *unit, uint16_t data_packed)
     CHECK_TYPE(unit, &UNIT_SIPO);
     struct priv *priv = unit->data;
 
-    uint16_t spread = pinmask_spread(data_packed, priv->data_pins);
-    priv->data_port->BSRR = spread | (((~spread) & priv->data_pins) << 16);
+    uint16_t spread = pinmask_spread(data_packed, priv->cfg.data_pins);
+    priv->data_port->BSRR = spread | (((~spread) & priv->cfg.data_pins) << 16);
     return E_SUCCESS;
 }
 
@@ -89,7 +89,7 @@ error_t UU_SIPO_DirectClear(Unit *unit)
 {
     CHECK_TYPE(unit, &UNIT_SIPO);
     struct priv *priv = unit->data;
-    send_pulse(priv->clear_pol, priv->clear_port, priv->clear_ll);
+    send_pulse(priv->cfg.clear_pol, priv->clear_port, priv->clear_ll);
     return E_SUCCESS;
 }
 
@@ -97,7 +97,7 @@ error_t UU_SIPO_DirectShift(Unit *unit)
 {
     CHECK_TYPE(unit, &UNIT_SIPO);
     struct priv *priv = unit->data;
-    send_pulse(priv->shift_pol, priv->shift_port, priv->shift_ll);
+    send_pulse(priv->cfg.shift_pol, priv->shift_port, priv->shift_ll);
     return E_SUCCESS;
 }
 
@@ -105,6 +105,6 @@ error_t UU_SIPO_DirectStore(Unit *unit)
 {
     CHECK_TYPE(unit, &UNIT_SIPO);
     struct priv *priv = unit->data;
-    send_pulse(priv->store_pol, priv->store_port, priv->store_ll);
+    send_pulse(priv->cfg.store_pol, priv->store_port, priv->store_ll);
     return E_SUCCESS;
 }

units/sipo/_sipo_init.c

@@ -14,20 +14,17 @@ error_t USIPO_preInit(Unit *unit)
     struct priv *priv = unit->data = calloc_ck(1, sizeof(struct priv));
     if (priv == NULL) return E_OUT_OF_MEM;
 
-    priv->store_pname = 'A';
-    priv->store_pnum = 0;
-    priv->store_pol = true;
+    priv->cfg.pin_store = R_PA0;
+    priv->cfg.store_pol = true;
 
-    priv->shift_pname = 'A';
-    priv->shift_pnum = 1;
-    priv->shift_pol = true;
+    priv->cfg.pin_shift = R_PA1;
+    priv->cfg.shift_pol = true;
 
-    priv->clear_pname = 'A';
-    priv->clear_pnum = 2;
-    priv->clear_pol = false;
+    priv->cfg.pin_clear = R_PA2;
+    priv->cfg.clear_pol = false;
 
-    priv->data_pname = 'A';
-    priv->data_pins = (1<<3);
+    priv->cfg.data_pname = 'A';
+    priv->cfg.data_pins = (1<<3);
 
     return E_SUCCESS;
 }
@@ -39,33 +36,23 @@ error_t USIPO_init(Unit *unit)
     struct priv *priv = unit->data;
 
     // --- Parse config ---
-    priv->store_ll = hw_pin2ll(priv->store_pnum, &suc);
-    priv->store_port = hw_port2periph(priv->store_pname, &suc);
-    Resource store_rsc = hw_pin2resource(priv->store_pname, priv->store_pnum, &suc);
+    suc &= hw_pinrsc2ll(priv->cfg.pin_store, &priv->store_port, &priv->store_ll);
+    suc &= hw_pinrsc2ll(priv->cfg.pin_shift, &priv->shift_port, &priv->shift_ll);
+    suc &= hw_pinrsc2ll(priv->cfg.pin_clear, &priv->clear_port, &priv->clear_ll);
     if (!suc) return E_BAD_CONFIG;
-    TRY(rsc_claim(unit, store_rsc));
-
-    priv->shift_ll = hw_pin2ll(priv->shift_pnum, &suc);
-    priv->shift_port = hw_port2periph(priv->shift_pname, &suc);
-    Resource shift_rsc = hw_pin2resource(priv->shift_pname, priv->shift_pnum, &suc);
-    if (!suc) return E_BAD_CONFIG;
-    TRY(rsc_claim(unit, shift_rsc));
-
-    priv->clear_ll = hw_pin2ll(priv->clear_pnum, &suc);
-    priv->clear_port = hw_port2periph(priv->clear_pname, &suc);
-    Resource clear_rsc = hw_pin2resource(priv->clear_pname, priv->clear_pnum, &suc);
-    if (!suc) return E_BAD_CONFIG;
-    TRY(rsc_claim(unit, clear_rsc));
+    TRY(rsc_claim(unit, priv->cfg.pin_store));
+    TRY(rsc_claim(unit, priv->cfg.pin_shift));
+    TRY(rsc_claim(unit, priv->cfg.pin_clear));
 
     // Claim all needed pins
-    TRY(rsc_claim_gpios(unit, priv->data_pname, priv->data_pins));
-    priv->data_port = hw_port2periph(priv->data_pname, &suc);
+    TRY(rsc_claim_gpios(unit, priv->cfg.data_pname, priv->cfg.data_pins));
+    priv->data_port = hw_port2periph(priv->cfg.data_pname, &suc);
 
     // --- Init hardware ---
 
     priv->data_width = 0;
     for (int i = 0; i < 16; i++) {
-        if (priv->data_pins & (1 << i)) {
+        if (priv->cfg.data_pins & (1 << i)) {
             uint32_t ll_pin = hw_pin2ll((uint8_t) i, &suc);
             LL_GPIO_SetPinMode(priv->data_port, ll_pin, LL_GPIO_MODE_OUTPUT);
             LL_GPIO_SetPinOutputType(priv->data_port, ll_pin, LL_GPIO_OUTPUT_PUSHPULL);
@@ -75,7 +62,7 @@ error_t USIPO_init(Unit *unit)
     }
 
     // Set the initial state - zeros
-    priv->data_port->ODR &= ~priv->data_pins;
+    priv->data_port->ODR &= ~priv->cfg.data_pins;
 
 
     // STORE
@@ -83,7 +70,7 @@ error_t USIPO_init(Unit *unit)
     LL_GPIO_SetPinOutputType(priv->store_port, priv->store_ll, LL_GPIO_OUTPUT_PUSHPULL);
     LL_GPIO_SetPinSpeed(priv->store_port, priv->store_ll, LL_GPIO_SPEED_FREQ_HIGH);
 
-    if (priv->store_pol)
+    if (priv->cfg.store_pol)
         LL_GPIO_ResetOutputPin(priv->store_port, priv->store_ll);
     else
         LL_GPIO_SetOutputPin(priv->store_port, priv->store_ll);
@@ -93,7 +80,7 @@ error_t USIPO_init(Unit *unit)
     LL_GPIO_SetPinOutputType(priv->shift_port, priv->shift_ll, LL_GPIO_OUTPUT_PUSHPULL);
     LL_GPIO_SetPinSpeed(priv->shift_port, priv->shift_ll, LL_GPIO_SPEED_FREQ_HIGH);
 
-    if (priv->shift_pol)
+    if (priv->cfg.shift_pol)
         LL_GPIO_ResetOutputPin(priv->shift_port, priv->shift_ll);
     else
         LL_GPIO_SetOutputPin(priv->shift_port, priv->shift_ll);
@@ -103,7 +90,7 @@ error_t USIPO_init(Unit *unit)
     LL_GPIO_SetPinOutputType(priv->clear_port, priv->clear_ll, LL_GPIO_OUTPUT_PUSHPULL);
     LL_GPIO_SetPinSpeed(priv->clear_port, priv->clear_ll, LL_GPIO_SPEED_FREQ_HIGH);
 
-    if (priv->clear_pol)
+    if (priv->cfg.clear_pol)
         LL_GPIO_ResetOutputPin(priv->clear_port, priv->clear_ll);
     else
         LL_GPIO_SetOutputPin(priv->clear_port, priv->clear_ll);

units/sipo/_sipo_internal.h

@@ -13,21 +13,20 @@
 
 /** Private data structure */
 struct priv {
+    struct {
         // settings
-    char    store_pname;
-    uint8_t store_pnum;
+        Resource pin_store;
         bool store_pol;   //!< Store pulse active edge
 
-    char    shift_pname;
-    uint8_t shift_pnum;
+        Resource pin_shift;
         bool shift_pol;   //!< Shift clock active edge
 
-    char    clear_pname;
-    uint8_t clear_pnum;
+        Resource pin_clear;
         bool clear_pol;   //!< Clear signal active level
 
         char data_pname;
         uint16_t data_pins;
+    } cfg;
 
     // live fields
     uint32_t store_ll;

units/sipo/_sipo_settings.c

@@ -16,20 +16,17 @@ void USIPO_loadBinary(Unit *unit, PayloadParser *pp)
     uint8_t version = pp_u8(pp);
     (void)version;
 
-    priv->store_pname = pp_char(pp);
-    priv->store_pnum = pp_u8(pp);
-    priv->store_pol = pp_bool(pp);
+    priv->cfg.pin_store = (Resource) pp_u8(pp);
+    priv->cfg.store_pol = pp_bool(pp);
 
-    priv->shift_pname = pp_char(pp);
-    priv->shift_pnum = pp_u8(pp);
-    priv->shift_pol = pp_bool(pp);
+    priv->cfg.pin_shift = (Resource) pp_u8(pp);
+    priv->cfg.shift_pol = pp_bool(pp);
 
-    priv->clear_pname = pp_char(pp);
-    priv->clear_pnum = pp_u8(pp);
-    priv->clear_pol = pp_bool(pp);
+    priv->cfg.pin_clear = (Resource) pp_u8(pp);
+    priv->cfg.clear_pol = pp_bool(pp);
 
-    priv->data_pname = pp_char(pp);
-    priv->data_pins = pp_u16(pp);
+    priv->cfg.data_pname = pp_char(pp);
+    priv->cfg.data_pins = pp_u16(pp);
 }
 
 /** Write to a binary buffer for storing in Flash */
@@ -39,20 +36,17 @@ void USIPO_writeBinary(Unit *unit, PayloadBuilder *pb)
 
     pb_u8(pb, 0); // version
 
-    pb_char(pb, priv->store_pname);
-    pb_u8(pb, priv->store_pnum);
-    pb_bool(pb, priv->store_pol);
+    pb_u8(pb, priv->cfg.pin_store);
+    pb_bool(pb, priv->cfg.store_pol);
 
-    pb_char(pb, priv->shift_pname);
-    pb_u8(pb, priv->shift_pnum);
-    pb_bool(pb, priv->shift_pol);
+    pb_u8(pb, priv->cfg.pin_shift);
+    pb_bool(pb, priv->cfg.shift_pol);
 
-    pb_char(pb, priv->clear_pname);
-    pb_u8(pb, priv->clear_pnum);
-    pb_bool(pb, priv->clear_pol);
+    pb_u8(pb, priv->cfg.pin_clear);
+    pb_bool(pb, priv->cfg.clear_pol);
 
-    pb_char(pb, priv->data_pname);
-    pb_u16(pb, priv->data_pins);
+    pb_char(pb, priv->cfg.data_pname);
+    pb_u16(pb, priv->cfg.data_pins);
 }
 
 // ------------------------------------------------------------------------
@@ -64,30 +58,30 @@ error_t USIPO_loadIni(Unit *unit, const char *key, const char *value)
     struct priv *priv = unit->data;
 
     if (streq(key, "store-pin")) {
-        suc = parse_pin(value, &priv->store_pname, &priv->store_pnum);
+        priv->cfg.pin_store = cfg_pinrsc_parse(value, &suc);
     }
     else if (streq(key, "shift-pin")) {
-        suc = parse_pin(value, &priv->shift_pname, &priv->shift_pnum);
+        priv->cfg.pin_shift = cfg_pinrsc_parse(value, &suc);
     }
     else if (streq(key, "clear-pin")) {
-        suc = parse_pin(value, &priv->clear_pname, &priv->clear_pnum);
+        priv->cfg.pin_clear = cfg_pinrsc_parse(value, &suc);
     }
 
     else if (streq(key, "store-pol")) {
-        priv->store_pol = (bool) avr_atoi(value);
+        priv->cfg.store_pol = cfg_bool_parse(value, &suc);
     }
     else if (streq(key, "shift-pol")) {
-        priv->shift_pol = (bool) avr_atoi(value);
+        priv->cfg.shift_pol = cfg_bool_parse(value, &suc);
     }
     else if (streq(key, "clear-pol")) {
-        priv->clear_pol = (bool) avr_atoi(value);
+        priv->cfg.clear_pol = cfg_bool_parse(value, &suc);
     }
 
     else if (streq(key, "data-port")) {
-        suc = parse_port_name(value, &priv->data_pname);
+        suc = cfg_port_parse(value, &priv->cfg.data_pname);
     }
     else if (streq(key, "data-pins")) {
-        priv->data_pins = (uint16_t) parse_pinmask(value, &suc);
+        priv->cfg.data_pins = cfg_pinmask_parse(value, &suc);
     }
 
     else {
@@ -104,19 +98,19 @@ void USIPO_writeIni(Unit *unit, IniWriter *iw)
     struct priv *priv = unit->data;
 
     iw_comment(iw, "Shift pin & its active edge (1-rising,0-falling)");
-    iw_entry(iw, "shift-pin", "%c%d", priv->shift_pname,  priv->shift_pnum);
-    iw_entry(iw, "shift-pol", "%d", priv->shift_pol);
+    iw_entry_s(iw, "shift-pin", cfg_pinrsc_encode(priv->cfg.pin_shift));
+    iw_entry_d(iw, "shift-pol", priv->cfg.shift_pol);
 
     iw_comment(iw, "Store pin & its active edge");
-    iw_entry(iw, "store-pin", "%c%d", priv->store_pname,  priv->store_pnum);
-    iw_entry(iw, "store-pol", "%d", priv->store_pol);
+    iw_entry_s(iw, "store-pin", cfg_pinrsc_encode(priv->cfg.pin_store));
+    iw_entry_d(iw, "store-pol", priv->cfg.store_pol);
 
     iw_comment(iw, "Clear pin & its active level");
-    iw_entry(iw, "clear-pin", "%c%d", priv->clear_pname,  priv->clear_pnum);
-    iw_entry(iw, "clear-pol", "%d", priv->clear_pol);
+    iw_entry_s(iw, "clear-pin", cfg_pinrsc_encode(priv->cfg.pin_clear));
+    iw_entry_d(iw, "clear-pol", priv->cfg.clear_pol);
 
     iw_comment(iw, "Data port and pins");
-    iw_entry(iw, "data-port", "%c", priv->data_pname);
-    iw_entry(iw, "data-pins", "%s", pinmask2str_up(priv->data_pins, unit_tmp512));
+    iw_entry(iw, "data-port", "%c", priv->cfg.data_pname);
+    iw_entry_s(iw, "data-pins", cfg_pinmask_encode(priv->cfg.data_pins, unit_tmp512, true));
 }
 

units/spi/_spi_settings.c

@@ -58,31 +58,31 @@ error_t USPI_loadIni(Unit *unit, const char *key, const char *value)
     struct priv *priv = unit->data;
 
     if (streq(key, "device")) {
-        priv->periph_num = (uint8_t) avr_atoi(value);
+        priv->periph_num = cfg_u8_parse(value, &suc);
     }
     else if (streq(key, "remap")) {
-        priv->remap = (uint8_t) avr_atoi(value);
+        priv->remap = cfg_u8_parse(value, &suc);
     }
     else if (streq(key, "prescaller")) {
-        priv->prescaller = (uint16_t ) avr_atoi(value);
+        priv->prescaller = cfg_u16_parse(value, &suc);
     }
     else if (streq(key, "cpol")) {
-        priv->cpol = (bool) avr_atoi(value);
+        priv->cpol = cfg_bool_parse(value, &suc);
     }
     else if (streq(key, "cpha")) {
-        priv->cpha = (bool) avr_atoi(value);
+        priv->cpha = cfg_bool_parse(value, &suc);
     }
     else if (streq(key, "tx-only")) {
-        priv->tx_only = str_parse_yn(value, &suc);
+        priv->tx_only = cfg_bool_parse(value, &suc);
     }
     else if (streq(key, "first-bit")) {
-        priv->lsb_first = (bool)str_parse_2(value, "MSB", 0, "LSB", 1, &suc);
+        priv->lsb_first = (bool) cfg_enum2_parse(value, "MSB", 0, "LSB", 1, &suc);
     }
     else if (streq(key, "port")) {
-        suc = parse_port_name(value, &priv->ssn_port_name);
+        suc = cfg_port_parse(value, &priv->ssn_port_name);
     }
     else if (streq(key, "pins")) {
-        priv->ssn_pins = parse_pinmask(value, &suc);
+        priv->ssn_pins = cfg_pinmask_parse(value, &suc);
     }
     else {
         return E_BAD_KEY;
@@ -98,7 +98,7 @@ void USPI_writeIni(Unit *unit, IniWriter *iw)
     struct priv *priv = unit->data;
 
     iw_comment(iw, "Peripheral number (SPIx)");
-    iw_entry(iw, "device", "%d", (int)priv->periph_num);
+    iw_entry_d(iw, "device", priv->periph_num);
 
     // TODO show a legend for peripherals and remaps
     iw_comment(iw, "Pin mappings (SCK,MISO,MOSI)");
@@ -114,30 +114,28 @@ void USPI_writeIni(Unit *unit, IniWriter *iw)
 #else
     #error "BAD PLATFORM!"
 #endif
-    iw_entry(iw, "remap", "%d", (int)priv->remap);
+    iw_entry_d(iw, "remap", priv->remap);
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Prescaller: 2,4,8,...,256");
-    iw_entry(iw, "prescaller", "%d", (int)priv->prescaller);
+    iw_entry_d(iw, "prescaller", priv->prescaller);
 
     iw_comment(iw, "Clock polarity: 0,1 (clock idle level)");
-    iw_entry(iw, "cpol", "%d", (int)priv->cpol);
+    iw_entry_d(iw, "cpol", priv->cpol);
 
     iw_comment(iw, "Clock phase: 0,1 (active edge, 0-first, 1-second)");
-    iw_entry(iw, "cpha", "%d", (int)priv->cpha);
+    iw_entry_d(iw, "cpha", priv->cpha);
 
     iw_comment(iw, "Transmit only, disable MISO");
-    iw_entry(iw, "tx-only", str_yn(priv->tx_only));
+    iw_entry_s(iw, "tx-only", str_yn(priv->tx_only));
 
     iw_comment(iw, "Bit order (LSB or MSB first)");
-    iw_entry(iw, "first-bit", str_2((uint32_t)priv->lsb_first,
-                                    0, "MSB",
-                                    1, "LSB"));
+    iw_entry_s(iw, "first-bit", cfg_enum2_encode((uint32_t) priv->lsb_first, 0, "MSB", 1, "LSB"));
 
     iw_cmt_newline(iw);
     iw_comment(iw, "SS port name");
     iw_entry(iw, "port", "%c", priv->ssn_port_name);
 
     iw_comment(iw, "SS pins (comma separated, supports ranges)");
-    iw_entry(iw, "pins", "%s", pinmask2str(priv->ssn_pins, unit_tmp512));
+    iw_entry_s(iw, "pins", cfg_pinmask_encode(priv->ssn_pins, unit_tmp512, 0));
 }

units/template/install.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+echo "Enter unit type identifier (empty to cancel):"
+read x
+
+if [ -e $x ]; then
+  exit; 
+fi
+
+xl="${x,,}"
+xu="${x^^}"
+
+for f in *.h; do mv -- "$f" "${f//tpl/$xl}"; done
+for f in *.c; do mv -- "$f" "${f//tpl/$xl}"; done
+
+sed "s/tpl/$xl/" -i *.h
+sed "s/TPL/$xu/" -i *.h
+sed "s/tpl/$xl/" -i *.c
+sed "s/TPL/$xu/" -i *.c
+
+echo "Unit $xu set up completed. Removing installer.."
+rm '!README.TXT'
+rm $0

units/touch/_touch_api.c

@@ -0,0 +1,11 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+#include "unit_touch.h"
+
+#define TOUCH_INTERNAL
+#include "_touch_internal.h"
+

units/touch/_touch_core.c

@@ -0,0 +1,217 @@
+//
+// Created by MightyPork on 2018/02/25.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+#include "unit_touch.h"
+
+#define TOUCH_INTERNAL
+
+#include "_touch_internal.h"
+
+// discharge time in ms
+#define DIS_TIME 1
+
+static void startNextPhase(Unit *unit);
+
+static void UTOUCH_EventReportJob(Job *job)
+{
+    Unit *unit = job->unit;
+    struct priv *priv = unit->data;
+
+    uint8_t buf[8];
+    PayloadBuilder pb = pb_start(buf, 8, NULL);
+    pb_u32(&pb, pinmask_pack_32(~job->data1, priv->all_channels_mask)); // inverted and packed - all pins (pressed state)
+    pb_u32(&pb, pinmask_pack_32(job->data2, priv->all_channels_mask)); // trigger generating pins
+    assert_param(pb.ok);
+
+    EventReport er = {
+        .unit = unit,
+        .type = 0x00,
+        .length = 8,
+        .data = buf,
+        .timestamp = job->timestamp,
+    };
+
+    EventReport_Send(&er);
+}
+
+static void UTOUCH_CheckForBinaryEvents(Unit *const unit)
+{
+    struct priv *priv = unit->data;
+
+    const uint32_t time_ms = PTIM_GetTime();
+
+    if (priv->last_done_ms == 0) {
+        // avoid bug with trigger on first capture
+        priv->last_done_ms = time_ms;
+    }
+
+    const uint64_t ts = PTIM_GetMicrotime();
+    uint32_t eventpins = 0;
+
+    const uint16_t ms_elapsed = (uint16_t) (time_ms - priv->last_done_ms);
+
+    for (uint16_t i = 0; i < 32; i++) {
+        const uint32_t poke = (uint32_t) (1 << i);
+        if (0 == (priv->all_channels_mask & poke)) continue;
+        if (priv->binary_thr[i] == 0) continue; // skip disabled channels
+
+        const bool isactive = (bool) (priv->binary_active_bits & poke);
+        const bool can_go_up = !isactive && (priv->readouts[i] > (priv->binary_thr[i] + priv->binary_hysteresis));
+        const bool can_go_down = isactive && (priv->readouts[i] < priv->binary_thr[i]);
+
+        if (can_go_up) {
+            priv->bin_trig_cnt[i] += ms_elapsed;
+            if (priv->bin_trig_cnt[i] >= priv->binary_debounce_ms) {
+                priv->binary_active_bits |= poke;
+                priv->bin_trig_cnt[i] = 0; // reset for the other direction of the switch
+
+                eventpins |= poke;
+            }
+        }
+        else if (priv->bin_trig_cnt[i] > 0) {
+            priv->bin_trig_cnt[i] = 0;
+        }
+
+        if (can_go_down) {
+            priv->bin_trig_cnt[i] -= ms_elapsed;
+            if (priv->bin_trig_cnt[i] <= -priv->binary_debounce_ms) {
+                priv->binary_active_bits &= ~poke;
+                priv->bin_trig_cnt[i] = 0; // reset for the other direction of the switch
+
+                eventpins |= poke;
+            }
+        }
+        else if (priv->bin_trig_cnt[i] < 0) {
+            priv->bin_trig_cnt[i] = 0;
+        }
+    }
+
+    if (eventpins != 0) {
+        Job j = {
+            .timestamp = ts,
+            .data1 = priv->binary_active_bits,
+            .data2 = eventpins,
+            .unit = unit,
+            .cb = UTOUCH_EventReportJob,
+        };
+
+        scheduleJob(&j);
+    }
+
+    priv->last_done_ms = time_ms;
+}
+
+void UTOUCH_HandleIrq(void *arg)
+{
+    Unit *unit = arg;
+    struct priv *priv = unit->data;
+
+    if (TSC->ISR & TSC_ISR_MCEF) {
+        priv->status = UTSC_STATUS_FAIL;
+        dbg_touch("TSC Failure.");
+        TSC->ICR = TSC_ICR_EOAIC | TSC_ICR_MCEIC;
+    }
+
+    if (TSC->ISR & TSC_ISR_EOAF) {
+        TSC->ICR = TSC_ICR_EOAIC;
+//        assert_param((TSC->IOGCSR>>16) == priv->groups_phase[priv->next_phase]);
+
+        // Store captured data
+        const uint32_t chmask = TSC->IOCCR;
+        for (int i = 0; i < 32; i++) {
+            if (chmask & (1<<i)) {
+                priv->readouts[i] = (uint16_t) (TSC->IOGXCR[i >> 2] & 0x3FFF);
+            }
+        }
+
+        priv->next_phase++;
+
+        if (!priv->cfg.interlaced) {
+            // check if we've run out of existing or populated groups
+            if (priv->next_phase == 3 || priv->groups_phase[priv->next_phase] == 0) {
+                priv->next_phase = 0;
+                priv->status = UTSC_STATUS_READY;
+                UTOUCH_CheckForBinaryEvents(unit);
+            }
+        }
+
+        TSC->CR &= ~TSC_CR_IODEF; // pull low - discharge
+    }
+
+    priv->ongoing = false;
+    priv->discharge_delay = DIS_TIME;
+}
+
+#if TSC_DEBUG
+static volatile uint32_t xcnt=0;
+#endif
+
+void UTOUCH_updateTick(Unit *unit)
+{
+#if TSC_DEBUG
+    xcnt++;
+#endif
+
+    struct priv *priv = unit->data;
+
+    if (priv->ongoing) {
+        return;
+    }
+
+    if (priv->discharge_delay > 0) {
+        priv->discharge_delay--;
+    } else {
+        startNextPhase(unit);
+    }
+
+#if TSC_DEBUG
+    if(xcnt >= 250) {
+        xcnt=0;
+        PRINTF("> ");
+        for (int i = 0; i < 32; i++) {
+            if (priv->all_channels_mask & (1<<i)) {
+                PRINTF("%d ", (int)priv->readouts[i]);
+            }
+        }
+        PRINTF("\r\n");
+    }
+#endif
+}
+
+static void startNextPhase(Unit *unit)
+{
+    struct priv *priv = unit->data;
+
+    if (priv->all_channels_mask == 0) return;
+
+    if (priv->cfg.interlaced) {
+        // Find the next non-zero bit, wrap around if needed
+        while ((priv->all_channels_mask & (1<<priv->next_phase))==0) {
+            priv->next_phase++;
+            if (priv->next_phase == 32) {
+                priv->next_phase = 0;
+                priv->status = UTSC_STATUS_READY;
+                UTOUCH_CheckForBinaryEvents(unit);
+            }
+        }
+        TSC->IOGCSR = (uint32_t) (1 << (priv->next_phase >> 2)); // phase divided by 4
+        TSC->IOCCR = (uint32_t) (1 << priv->next_phase);
+
+        // interlaced - float neighbouring electrodes
+        TSC->CR |= TSC_CR_IODEF;
+    } else {
+        TSC->IOGCSR = priv->groups_phase[priv->next_phase];
+        TSC->IOCCR = priv->channels_phase[priv->next_phase];
+
+        // separate - keep neighbouring electrodes at GND
+    }
+
+    TSC->ICR = TSC_ICR_EOAIC | TSC_ICR_MCEIC;
+
+    // Go!
+    priv->ongoing = true;
+    TSC->CR |= TSC_CR_START;
+}

units/touch/_touch_init.c

@@ -0,0 +1,221 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+
+#define TOUCH_INTERNAL
+
+#include "_touch_internal.h"
+
+/** Allocate data structure and set defaults */
+error_t UTOUCH_preInit(Unit *unit)
+{
+    struct priv *priv = unit->data = calloc_ck(1, sizeof(struct priv));
+    if (priv == NULL) return E_OUT_OF_MEM;
+
+    priv->cfg.charge_time = 2;
+    priv->cfg.drain_time = 2;
+    priv->cfg.spread_deviation = 0;
+    priv->cfg.ss_presc = 1;
+    priv->cfg.pg_presc = 32;
+    priv->cfg.sense_timeout = 7;
+    memset(priv->cfg.group_scaps, 0, 8);
+    memset(priv->cfg.group_channels, 0, 8);
+    priv->cfg.binary_hysteresis = 10;
+    priv->cfg.binary_debounce_ms = 20;
+
+    return E_SUCCESS;
+}
+
+/** Finalize unit set-up */
+error_t UTOUCH_init(Unit *unit)
+{
+    bool suc = true;
+    struct priv *priv = unit->data;
+
+    unit->tick_interval = 1; // sample every 1 ms
+
+    // copy from conf
+    priv->binary_debounce_ms = priv->cfg.binary_debounce_ms;
+    priv->binary_hysteresis = priv->cfg.binary_hysteresis;
+
+    TRY(rsc_claim(unit, R_TSC));
+
+    // simple bound checks, just clamp without error
+    if (priv->cfg.charge_time > 16) priv->cfg.charge_time = 16;
+    if (priv->cfg.charge_time < 1) priv->cfg.charge_time = 1;
+
+    if (priv->cfg.drain_time > 16) priv->cfg.drain_time = 16;
+    if (priv->cfg.drain_time < 1) priv->cfg.drain_time = 1;
+
+    if (priv->cfg.spread_deviation > 128) priv->cfg.drain_time = 128;
+
+    if (priv->cfg.ss_presc > 2) priv->cfg.ss_presc = 2;
+    if (priv->cfg.ss_presc < 1) priv->cfg.ss_presc = 1;
+
+    if (priv->cfg.sense_timeout > 7) priv->cfg.sense_timeout = 7;
+    if (priv->cfg.sense_timeout < 1) priv->cfg.sense_timeout = 1;
+
+    uint8_t tmppgpresc = priv->cfg.pg_presc;
+    if (tmppgpresc == 0) return E_BAD_CONFIG;
+    uint8_t pgpresc_reg = 0;
+    while ((tmppgpresc & 1) == 0 && tmppgpresc != 0) {
+        pgpresc_reg++;
+        tmppgpresc >>= 1;
+    }
+    if (tmppgpresc != 1 || pgpresc_reg > 7) {
+        dbg("Bad pgpresc");
+        return E_BAD_CONFIG; // TODO better reporting
+    }
+
+    if ((pgpresc_reg==0 && priv->cfg.drain_time<=2) || (pgpresc_reg==1 && priv->cfg.drain_time==0)) {
+        dbg("Illegal PGPSC vs CTPL");
+        return E_BAD_CONFIG;
+    }
+
+    // enable clock
+    hw_periph_clock_enable(TSC);
+    // reset
+    __HAL_RCC_TSC_FORCE_RESET();
+    __HAL_RCC_TSC_RELEASE_RESET();
+
+    priv->all_channels_mask = 0;
+
+    for (int gi = 0; gi < 8; gi++) {
+        const uint8_t cap = priv->cfg.group_scaps[gi];
+        const uint8_t ch = priv->cfg.group_channels[gi];
+
+        if (cap == 0) {
+            if (ch != 0) {
+                dbg_touch("TSC group %d has no cap!", (int) (gi + 1));
+                return E_BAD_CONFIG;
+            }
+            continue;
+        }
+
+        if (ch == 0) continue; // if no channels, don't bother setting up anything
+
+        if (cap != 2 && cap != 4 && cap != 8 && cap != 16) {
+            dbg_touch("TSC group %d has more than 1 cap!", (int) (gi + 1));
+            return E_BAD_CONFIG;
+        }
+
+        if (cap & ch) {
+            dbg_touch("TSC pin can't be both channel and cap! (gpr %d)", (int) (gi + 1));
+            return E_BAD_CONFIG;
+        }
+
+        // This is a loop through the pins in a group gi
+        int phasenum = 0;
+        for (int pi = 0; pi < 4; pi++) {
+            // pin numbers are 1-based in the config
+            const bool iscap = 0 != (cap & (2 << pi));
+            const bool isch = 0 != (ch & (2 << pi));
+
+            if (!iscap && !isch) continue;
+
+            Resource r = utouch_group_rscs[gi][pi];
+            TRY(rsc_claim(unit, r));
+
+            GPIO_TypeDef *port;
+            uint32_t ll;
+            assert_param(hw_pinrsc2ll(r, &port, &ll));
+            LL_GPIO_SetPinOutputType(port, ll, isch ? LL_GPIO_OUTPUT_PUSHPULL : LL_GPIO_OUTPUT_OPENDRAIN);
+
+            // 7 and 8 (1-based) use AF1, else AF3
+            TRY(hw_configure_gpiorsc_af(r, gi >= 6 ? LL_GPIO_AF_1 : LL_GPIO_AF_3));
+
+            uint32_t bit = (uint32_t) (1 << (gi * 4 + pi));
+
+            if (iscap) {
+                dbg_touch("TSC cap @ %s", rsc_get_name(r));
+                // Sampling cap
+                TSC->IOSCR |= bit;
+
+                // Disable pin hysteresis (causes noise)
+                TSC->IOHCR ^= bit;
+            }
+            else {
+                dbg_touch("TSC ch @ %s", rsc_get_name(r));
+
+                if (priv->cfg.interlaced) {
+                    // interlaced - only update the mask beforehand
+                    priv->all_channels_mask |= bit;
+                } else {
+                    // channels are configured individually when read.
+                    // we prepare bitmaps to use for the read groups (all can be read in at most 3 steps)
+                    priv->channels_phase[phasenum] |= bit; // this is used for the channel selection register
+                    priv->groups_phase[phasenum] |= 1 << gi; // this will be used for the group enable register, if all 0, this and any following phases are unused.
+                    phasenum++;
+                }
+            }
+        }
+    }
+
+    // common TSC config
+    TSC->CR =
+        ((priv->cfg.charge_time - 1) << TSC_CR_CTPH_Pos) |
+        ((priv->cfg.drain_time - 1) << TSC_CR_CTPL_Pos) |
+        ((priv->cfg.ss_presc - 1) << TSC_CR_SSPSC_Pos) |
+        (pgpresc_reg << TSC_CR_PGPSC_Pos) |
+        ((priv->cfg.sense_timeout - 1) << TSC_CR_MCV_Pos) |
+        TSC_CR_TSCE;
+
+    if (priv->cfg.spread_deviation > 0) {
+        TSC->CR |= ((priv->cfg.spread_deviation - 1) << TSC_CR_SSD_Pos) | TSC_CR_SSE;
+    }
+
+    dbg_touch("CR = %08x, ht is %d, lt is %d", (int)TSC->CR,
+              (int)priv->cfg.charge_time,
+              (int)priv->cfg.drain_time);
+
+    // iofloat is used for discharging
+
+    // Enable the interrupts
+    TSC->IER = TSC_IER_EOAIE | TSC_IER_MCEIE;
+    irqd_attach(TSC, UTOUCH_HandleIrq, unit);
+
+    if (!priv->cfg.interlaced) {
+        dbg_touch("TSC phases:");
+        for (int i = 0; i < 3; i++) {
+            priv->all_channels_mask |= priv->channels_phase[i];
+
+            dbg_touch(" %d: ch %08"PRIx32", g %02"PRIx32,
+                      i + 1,
+                      priv->channels_phase[i],
+                      (uint32_t) priv->groups_phase[i]);
+        }
+    }
+
+    priv->status = UTSC_STATUS_BUSY; // first loop ...
+    priv->next_phase = 0;
+
+    // starts in the tick callback
+
+    return E_SUCCESS;
+}
+
+
+/** Tear down the unit */
+void UTOUCH_deInit(Unit *unit)
+{
+    struct priv *priv = unit->data;
+
+    // de-init peripherals
+    if (unit->status == E_SUCCESS) {
+        hw_periph_clock_disable(TSC);
+        // clear all registers to their default values
+        __HAL_RCC_TSC_FORCE_RESET();
+        __HAL_RCC_TSC_RELEASE_RESET();
+
+        irqd_detach(TSC, UTOUCH_HandleIrq);
+    }
+
+    // Release all resources, deinit pins
+    rsc_teardown(unit);
+
+    // Free memory
+    free_ck(unit->data);
+}

units/touch/_touch_internal.h

@@ -0,0 +1,95 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#ifndef GEX_F072_TOUCH_INTERNAL_H
+#define GEX_F072_TOUCH_INTERNAL_H
+
+#ifndef TOUCH_INTERNAL
+#error bad include!
+#endif
+
+#include "unit_base.h"
+
+#define TSC_DEBUG 0
+
+#if TSC_DEBUG
+#define dbg_touch(f,...) dbg(f,##__VA_ARGS__)
+#else
+#define dbg_touch(f,...) do{}while(0)
+#endif
+
+enum utsc_status {
+    UTSC_STATUS_BUSY = 0,
+    UTSC_STATUS_READY = 1,
+    UTSC_STATUS_FAIL = 2
+};
+
+/** Private data structure */
+struct priv {
+    // settings
+    struct {
+        uint8_t charge_time;  // 1-16 -> 0..15
+        uint8_t drain_time;   // 1-16 -> 0..15
+        uint8_t spread_deviation; // 1-128, 0=off ... 0-127, 0 sets 0 to SSE
+        uint8_t ss_presc;     // 1-2 -> 0..1
+        uint8_t pg_presc;     // 1,2,4,8,16,32,64,128 -> 0..7 when writing to the periph
+        uint8_t sense_timeout; // 1-7 -> 0..6 hex when writing to the periph
+        // the schmitts must be disabled on all used channels, restored to 0xFFFF on deinit
+        uint8_t group_scaps[8];
+        uint8_t group_channels[8];
+        bool interlaced;
+        uint16_t binary_debounce_ms;
+        uint16_t binary_hysteresis;
+    } cfg;
+
+    uint8_t next_phase;
+    uint8_t discharge_delay;
+    uint32_t channels_phase[3];
+    uint8_t groups_phase[3];
+    uint16_t readouts[32];
+    int16_t bin_trig_cnt[32];
+    uint16_t binary_debounce_ms;
+    uint16_t binary_hysteresis;
+    uint16_t binary_thr[32];
+    uint32_t binary_active_bits;
+    uint32_t all_channels_mask;
+    uint32_t last_done_ms;
+    bool ongoing;
+
+    enum utsc_status status;
+} __attribute__((packed));
+
+extern const char *utouch_group_labels[8];
+extern const Resource utouch_group_rscs[8][4];
+
+/** Allocate data structure and set defaults */
+error_t UTOUCH_preInit(Unit *unit);
+
+/** Load from a binary buffer stored in Flash */
+void UTOUCH_loadBinary(Unit *unit, PayloadParser *pp);
+
+/** Write to a binary buffer for storing in Flash */
+void UTOUCH_writeBinary(Unit *unit, PayloadBuilder *pb);
+
+// ------------------------------------------------------------------------
+
+/** Parse a key-value pair from the INI file */
+error_t UTOUCH_loadIni(Unit *unit, const char *key, const char *value);
+
+/** Generate INI file section for the unit */
+void UTOUCH_writeIni(Unit *unit, IniWriter *iw);
+
+// ------------------------------------------------------------------------
+
+/** Finalize unit set-up */
+error_t UTOUCH_init(Unit *unit);
+
+/** Tear down the unit */
+void UTOUCH_deInit(Unit *unit);
+
+void UTOUCH_updateTick(Unit *unit);
+
+void UTOUCH_HandleIrq(void *arg);
+
+#endif //GEX_F072_TOUCH_INTERNAL_H

units/touch/_touch_settings.c

@@ -0,0 +1,187 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+
+#define TOUCH_INTERNAL
+#include "_touch_internal.h"
+
+const char *utouch_group_labels[8] = {
+    "1:A0, 2:A1, 3:A2, 4:A3",
+    "1:A4, 2:A5, 3:A6, 4:A7",
+    "1:C5, 2:B0, 3:B1, 4:B2",
+    "1:A9, 2:A10, 3:A11, 4:A12",
+    "1:B3, 2:B4, 3:B6, 4:B7",
+    "1:B11, 2:B12, 3:B13, 4:B14",
+    "1:E2, 2:E3, 3:E4, 4:E5",
+    "1:D12, 2:D13, 3:D14, 4:D15",
+};
+
+const Resource utouch_group_rscs[8][4] = {
+    {R_PA0, R_PA1, R_PA2, R_PA3},
+    {R_PA4, R_PA5, R_PA6, R_PA7},
+    {R_PC5, R_PB0, R_PB1, R_PB2},
+    {R_PA9, R_PA10, R_PA11, R_PA12},
+    {R_PB3, R_PB4, R_PB6, R_PB7},
+    {R_PB11, R_PB12, R_PB13, R_PB14},
+    {R_PE2, R_PE3, R_PE4, R_PE5},
+    {R_PD12, R_PD13, R_PD14, R_PD15},
+};
+
+/** Load from a binary buffer stored in Flash */
+void UTOUCH_loadBinary(Unit *unit, PayloadParser *pp)
+{
+    struct priv *priv = unit->data;
+
+    uint8_t version = pp_u8(pp);
+    (void)version;
+
+    priv->cfg.charge_time = pp_u8(pp);
+    priv->cfg.drain_time = pp_u8(pp);
+    priv->cfg.spread_deviation = pp_u8(pp);
+    priv->cfg.ss_presc = pp_u8(pp);
+    priv->cfg.pg_presc = pp_u8(pp);
+    priv->cfg.sense_timeout = pp_u8(pp);
+    pp_buf(pp, priv->cfg.group_scaps, 8);
+    pp_buf(pp, priv->cfg.group_channels, 8);
+
+    if (version >= 1) {
+        priv->cfg.interlaced = pp_bool(pp);
+    }
+
+    if (version >= 2) {
+        priv->cfg.binary_debounce_ms = pp_u16(pp);
+        priv->cfg.binary_hysteresis = pp_u16(pp);
+    }
+}
+
+/** Write to a binary buffer for storing in Flash */
+void UTOUCH_writeBinary(Unit *unit, PayloadBuilder *pb)
+{
+    struct priv *priv = unit->data;
+
+    pb_u8(pb, 2); // version
+
+    pb_u8(pb, priv->cfg.charge_time);
+    pb_u8(pb, priv->cfg.drain_time);
+    pb_u8(pb, priv->cfg.spread_deviation);
+    pb_u8(pb, priv->cfg.ss_presc);
+    pb_u8(pb, priv->cfg.pg_presc);
+    pb_u8(pb, priv->cfg.sense_timeout);
+    pb_buf(pb, priv->cfg.group_scaps, 8);
+    pb_buf(pb, priv->cfg.group_channels, 8);
+    pb_bool(pb, priv->cfg.interlaced);
+    pb_u16(pb, priv->cfg.binary_debounce_ms);
+    pb_u16(pb, priv->cfg.binary_hysteresis);
+}
+
+// ------------------------------------------------------------------------
+
+/** Parse a key-value pair from the INI file */
+error_t UTOUCH_loadIni(Unit *unit, const char *key, const char *value)
+{
+    bool suc = true;
+    struct priv *priv = unit->data;
+
+    if (streq(key, "charge-time")) {
+        priv->cfg.charge_time = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "drain-time")) {
+        priv->cfg.drain_time = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "ss-deviation")) {
+        priv->cfg.spread_deviation = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "ss-clock-prediv")) {
+        priv->cfg.ss_presc = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "pg-clock-prediv")) {
+        priv->cfg.pg_presc = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "sense-timeout")) {
+        priv->cfg.sense_timeout = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "interlaced-pads")) {
+        priv->cfg.interlaced = cfg_bool_parse(value, &suc);
+    }
+    else if (streq(key, "btn-debounce")) {
+        priv->cfg.binary_debounce_ms = cfg_u16_parse(value, &suc);
+    }
+    else if (streq(key, "btn-hysteresis")) {
+        priv->cfg.binary_hysteresis = cfg_u16_parse(value, &suc);
+    }
+    else {
+        volatile char namebuf[10]; // must be volatile or gcc optimizes out the second compare and fucks it up
+
+        for (int i = 0; i < 6; i++) { // skip 7,8
+            SPRINTF(namebuf, "g%d_cap", i+1);
+            if (streq(key, namebuf)) {
+                priv->cfg.group_scaps[i] = (uint8_t) cfg_pinmask_parse(value, &suc);
+                goto matched;
+            }
+
+            SPRINTF(namebuf, "g%d_ch", i+1);
+            if (streq(key, namebuf)) {
+                priv->cfg.group_channels[i] = (uint8_t) cfg_pinmask_parse(value, &suc);
+                goto matched;
+            }
+        }
+
+        return E_BAD_KEY;
+    }
+
+matched:
+    if (!suc) return E_BAD_VALUE;
+    return E_SUCCESS;
+}
+
+/** Generate INI file section for the unit */
+void UTOUCH_writeIni(Unit *unit, IniWriter *iw)
+{
+    struct priv *priv = unit->data;
+
+    iw_comment(iw, "This unit utilizes the touch sensing controller.");
+    iw_comment(iw, "See the reference manual for details about its function.");
+    iw_cmt_newline(iw);
+
+    iw_comment(iw, "Pulse generator clock prescaller (1,2,4,...,128)");
+    iw_entry_d(iw, "pg-clock-prediv", priv->cfg.pg_presc);
+    iw_comment(iw, "Sense pad charging time (1-16)");
+    iw_entry_d(iw, "charge-time", priv->cfg.charge_time);
+    iw_comment(iw, "Charge transfer time (1-16)");
+    iw_entry_d(iw, "drain-time", priv->cfg.drain_time);
+    iw_comment(iw, "Measurement timeout (1-7)");
+    iw_entry_d(iw, "sense-timeout", priv->cfg.sense_timeout);
+
+    iw_cmt_newline(iw);
+    iw_comment(iw, "Spread spectrum max deviation (0-128,0=off)");
+    iw_entry_d(iw, "ss-deviation", priv->cfg.spread_deviation);
+    iw_comment(iw, "Spreading clock prescaller (1,2)");
+    iw_entry_d(iw, "ss-clock-prediv", priv->cfg.ss_presc);
+
+    iw_cmt_newline(iw);
+    iw_comment(iw, "Optimize for interlaced pads (individual sampling with others floating)");
+    iw_entry_s(iw, "interlaced-pads", str_yn(priv->cfg.interlaced));
+
+    iw_cmt_newline(iw);
+    iw_comment(iw, "Button mode debounce (ms) and release hysteresis (lsb)");
+    iw_entry_d(iw, "btn-debounce", priv->cfg.binary_debounce_ms);
+    iw_entry_d(iw, "btn-hysteresis", priv->cfg.binary_hysteresis);
+
+    iw_cmt_newline(iw);
+    iw_comment(iw, "Each used group must have 1 sampling capacitor and 1-3 channels.");
+    iw_comment(iw, "Channels are numbered 1,2,3,4");
+    iw_cmt_newline(iw);
+
+    char namebuf[10];
+    for (int i = 0; i < 6; i++) { // skip 7,8
+        iw_commentf(iw,  "Group%d - %s", i+1, utouch_group_labels[i]);
+        SPRINTF(namebuf, "g%d_cap", i+1);
+        iw_entry_s(iw, namebuf, cfg_pinmask_encode(priv->cfg.group_scaps[i], unit_tmp512, true));
+        SPRINTF(namebuf, "g%d_ch", i+1);
+        iw_entry_s(iw, namebuf, cfg_pinmask_encode(priv->cfg.group_channels[i], unit_tmp512, true));
+    }
+}
+

units/touch/unit_touch.c

@@ -0,0 +1,136 @@
+//
+// Created by MightyPork on 2017/11/25.
+//
+
+#include "unit_base.h"
+#include "unit_touch.h"
+
+#define TOUCH_INTERNAL
+#include "_touch_internal.h"
+
+// ------------------------------------------------------------------------
+
+enum TouchCmd_ {
+    CMD_READ=0,
+    CMD_SET_BIN_THR=1,
+    CMD_DISABLE_ALL_REPORTS=2,
+    CMD_SET_DEBOUNCE_TIME=3,
+    CMD_SET_HYSTERESIS=4,
+    CMD_GET_CH_COUNT=10,
+};
+
+/** Handle a request message */
+static error_t UTOUCH_handleRequest(Unit *unit, TF_ID frame_id, uint8_t command, PayloadParser *pp)
+{
+    struct priv* priv = unit->data;
+    PayloadBuilder pb = pb_start(unit_tmp512, UNIT_TMP_LEN, NULL);
+
+    switch (command) {
+        /**
+         * read the current touch pad values (smaller = higher capacity)
+         *
+         * resp: a list of u16 (order: group and pin, ascending)
+         */
+        case CMD_READ:
+            if (priv->status == UTSC_STATUS_BUSY) return E_BUSY;
+            if (priv->status == UTSC_STATUS_FAIL) return E_HW_TIMEOUT;
+
+            for (int i = 0; i < 32; i++) {
+                if (priv->all_channels_mask & (1<<i)) {
+                    pb_u16(&pb, priv->readouts[i]);
+                }
+            }
+            com_respond_pb(frame_id, MSG_SUCCESS, &pb);
+            return E_SUCCESS;
+
+        /**
+         * Set thresholds for the button mode.
+         *
+         * pld: a list of u16 for the enabled channels (order: group and pin, ascending)
+         */
+        case CMD_SET_BIN_THR:
+            for (int i = 0; i < 32; i++) {
+                if (priv->all_channels_mask & (1<<i)) {
+                    priv->bin_trig_cnt[i] = 0;
+                    priv->binary_thr[i] = pp_u16(pp);
+                    if (priv->readouts[i] >= (priv->binary_thr[i] + priv->binary_hysteresis)) {
+                        priv->binary_active_bits |= 1<<i;
+                    }
+                }
+            }
+            return E_SUCCESS;
+
+        /**
+         * Set the debounce time in ms (replaces the default value from settings)
+         *
+         * pld: ms:u16
+         */
+        case CMD_SET_DEBOUNCE_TIME:
+            priv->binary_debounce_ms = pp_u16(pp);
+            return E_SUCCESS;
+
+        /**
+         * Set hysteresis (replaces the default value from settings)
+         *
+         * Hysteresis is added to the threshold value for the switch-off level
+         * (switch-off happens when the measured value is exceeded - capacity of the pad drops)
+         *
+         * pld: hyst:u16
+         */
+        case CMD_SET_HYSTERESIS:
+            priv->binary_hysteresis = pp_u16(pp);
+            return E_SUCCESS;
+
+        /**
+         * Disable button mode reports. This effectively sets all thresholds to 0, disabling checking.
+         */
+        case CMD_DISABLE_ALL_REPORTS:
+            for (int i = 0; i < 32; i++) {
+                if (priv->all_channels_mask & (1<<i)) {
+                    priv->binary_thr[i] = 0;
+                    priv->bin_trig_cnt[i] = 0;
+                }
+            }
+            priv->binary_active_bits = 0;
+            return E_SUCCESS;
+
+        /**
+         * Get the number of configured touch pad channels
+         *
+         * resp: count:u8
+         */
+        case CMD_GET_CH_COUNT:;
+            uint8_t nb = 0;
+            for (int i = 0; i < 32; i++) {
+                if (priv->all_channels_mask & (1<<i)) {
+                    nb++;
+                }
+            }
+            pb_u8(&pb, nb);
+            com_respond_pb(frame_id, MSG_SUCCESS, &pb);
+            return E_SUCCESS;
+
+        default:
+            return E_UNKNOWN_COMMAND;
+    }
+}
+
+// ------------------------------------------------------------------------
+
+/** Unit template */
+const UnitDriver UNIT_TOUCH = {
+    .name = "TOUCH",
+    .description = "Capacitive touch sensing",
+    // Settings
+    .preInit = UTOUCH_preInit,
+    .cfgLoadBinary = UTOUCH_loadBinary,
+    .cfgWriteBinary = UTOUCH_writeBinary,
+    .cfgLoadIni = UTOUCH_loadIni,
+    .cfgWriteIni = UTOUCH_writeIni,
+    // Init
+    .init = UTOUCH_init,
+    .deInit = UTOUCH_deInit,
+    // Function
+    .handleRequest = UTOUCH_handleRequest,
+    .updateTick = UTOUCH_updateTick,
+};

units/touch/unit_touch.h

@@ -0,0 +1,16 @@
+//
+// Created by MightyPork on 2017/11/25.
+//
+// Digital input unit; single or multiple pin read access on one port (A-F)
+//
+
+#ifndef U_TOUCH_H
+#define U_TOUCH_H
+
+#include "unit.h"
+
+extern const UnitDriver UNIT_TOUCH;
+
+// UU_ prototypes
+
+#endif //U_TOUCH_H

units/usart/_usart_settings.c

@@ -81,66 +81,66 @@ error_t UUSART_loadIni(Unit *unit, const char *key, const char *value)
     struct priv *priv = unit->data;
 
     if (streq(key, "device")) {
-        priv->periph_num = (uint8_t) avr_atoi(value);
+        priv->periph_num = cfg_u8_parse(value, &suc);
     }
     else if (streq(key, "remap")) {
-        priv->remap = (uint8_t) avr_atoi(value);
+        priv->remap = cfg_u8_parse(value, &suc);
     }
     else if (streq(key, "baud-rate")) {
-        priv->baudrate = (uint32_t ) avr_atoi(value);
+        priv->baudrate = cfg_u32_parse(value, &suc);
     }
     else if (streq(key, "parity")) {
-        priv->parity = (uint8_t) str_parse_3(value,
+        priv->parity = (uint8_t) cfg_enum3_parse(value,
                                                  "NONE", 0,
                                                  "ODD", 1,
                                                  "EVEN", 2, &suc);
     }
     else if (streq(key, "stop-bits")) {
-        priv->stopbits = (uint8_t) str_parse_4(value,
+        priv->stopbits = (uint8_t) cfg_enum4_parse(value,
                                                    "0.5", 0,
                                                    "1", 1,
                                                    "1.5", 2,
                                                    "2", 3, &suc);
     }
     else if (streq(key, "direction")) {
-        priv->direction = (uint8_t) str_parse_3(value,
+        priv->direction = (uint8_t) cfg_enum3_parse(value,
                                                     "RX", UUSART_DIRECTION_RX,
                                                     "TX", UUSART_DIRECTION_TX,
                                                     "RXTX", UUSART_DIRECTION_RXTX, &suc);
     }
     else if (streq(key, "hw-flow-control")) {
-        priv->hw_flow_control = (uint8_t) str_parse_4(value,
+        priv->hw_flow_control = (uint8_t) cfg_enum4_parse(value,
                                                           "NONE", 0,
                                                           "RTS", 1,
                                                           "CTS", 2,
                                                           "FULL", 3, &suc);
     }
     else if (streq(key, "word-width")) {
-        priv->width = (uint8_t ) avr_atoi(value);
+        priv->width = cfg_u8_parse(value, &suc);
     }
     else if (streq(key, "first-bit")) {
-        priv->lsb_first = (bool)str_parse_2(value, "MSB", 0, "LSB", 1, &suc);
+        priv->lsb_first = (bool) cfg_enum2_parse(value, "MSB", 0, "LSB", 1, &suc);
     }
     else if (streq(key, "clock-output")) {
-        priv->clock_output = str_parse_yn(value, &suc);
+        priv->clock_output = cfg_bool_parse(value, &suc);
     }
     else if (streq(key, "cpol")) {
-        priv->cpol = (bool) avr_atoi(value);
+        priv->cpol = cfg_bool_parse(value, &suc);
     }
     else if (streq(key, "cpha")) {
-        priv->cpha = (bool) avr_atoi(value);
+        priv->cpha = cfg_bool_parse(value, &suc);
     }
     else if (streq(key, "de-output")) {
-        priv->de_output = str_parse_yn(value, &suc);
+        priv->de_output = cfg_bool_parse(value, &suc);
     }
     else if (streq(key, "de-polarity")) {
-        priv->de_polarity = (bool) avr_atoi(value);
+        priv->de_polarity = cfg_bool_parse(value, &suc);
     }
     else if (streq(key, "de-assert-time")) {
-        priv->de_assert_time = (uint8_t) avr_atoi(value);
+        priv->de_assert_time = cfg_u8_parse(value, &suc);
     }
     else if (streq(key, "de-clear-time")) {
-        priv->de_clear_time = (uint8_t) avr_atoi(value);
+        priv->de_clear_time = cfg_u8_parse(value, &suc);
     }
     else {
         return E_BAD_KEY;
@@ -156,7 +156,7 @@ void UUSART_writeIni(Unit *unit, IniWriter *iw)
     struct priv *priv = unit->data;
 
     iw_comment(iw, "Peripheral number (UARTx 1-4)");
-    iw_entry(iw, "device", "%d", (int)priv->periph_num);
+    iw_entry_d(iw, "device", priv->periph_num);
 
     iw_comment(iw, "Pin mappings (TX,RX,CK,CTS,RTS/DE)");
 #if GEX_PLAT_F072_DISCOVERY
@@ -173,41 +173,41 @@ void UUSART_writeIni(Unit *unit, IniWriter *iw)
 #else
     #error "BAD PLATFORM!"
 #endif
-    iw_entry(iw, "remap", "%d", (int)priv->remap);
+    iw_entry_d(iw, "remap", priv->remap);
 
     iw_cmt_newline(iw);
-    iw_comment(iw, "Baud rate in bps (eg. 9600, 115200)"); // TODO examples/range
-    iw_entry(iw, "baud-rate", "%d", (int)priv->baudrate);
+    iw_comment(iw, "Baud rate in bps (eg. 9600)");
+    iw_entry_d(iw, "baud-rate", priv->baudrate);
 
     iw_comment(iw, "Parity type (NONE, ODD, EVEN)");
-    iw_entry(iw, "parity", "%s", str_3(priv->parity,
+    iw_entry_s(iw, "parity", cfg_enum3_encode(priv->parity,
                                                   0, "NONE",
                                                   1, "ODD",
                                                   2, "EVEN"));
 
     iw_comment(iw, "Number of stop bits (0.5, 1, 1.5, 2)");
-    iw_entry(iw, "stop-bits", "%s", str_4(priv->stopbits,
+    iw_entry_s(iw, "stop-bits", cfg_enum4_encode(priv->stopbits,
                                                      0, "0.5",
                                                      1, "1",
                                                      2, "1.5",
                                                      3, "2"));
 
     iw_comment(iw, "Bit order (LSB or MSB first)");
-    iw_entry(iw, "first-bit", str_2((uint32_t)priv->lsb_first,
+    iw_entry_s(iw, "first-bit", cfg_enum2_encode((uint32_t) priv->lsb_first,
                                                0, "MSB",
                                                1, "LSB"));
 
     iw_comment(iw, "Word width (7,8,9) - including parity bit if used");
-    iw_entry(iw, "word-width", "%d", (int)priv->width);
+    iw_entry_d(iw, "word-width", (int)priv->width);
 
     iw_comment(iw, "Enabled lines (RX,TX,RXTX)");
-    iw_entry(iw, "direction", str_3(priv->direction,
+    iw_entry_s(iw, "direction", cfg_enum3_encode(priv->direction,
                                                1, "RX",
                                                2, "TX",
                                                3, "RXTX"));
 
     iw_comment(iw, "Hardware flow control (NONE, RTS, CTS, FULL)");
-    iw_entry(iw, "hw-flow-control", "%s", str_4(priv->hw_flow_control,
+    iw_entry_s(iw, "hw-flow-control", cfg_enum4_encode(priv->hw_flow_control,
                                                            0, "NONE",
                                                            1, "RTS",
                                                            2, "CTS",
@@ -215,19 +215,19 @@ void UUSART_writeIni(Unit *unit, IniWriter *iw)
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Generate serial clock (Y,N)");
-    iw_entry(iw, "clock-output", str_yn(priv->clock_output));
-    iw_comment(iw, "Output clock polarity: 0,1 (clock idle level)");
-    iw_entry(iw, "cpol", "%d", (int)priv->cpol);
-    iw_comment(iw, "Output clock phase: 0,1 (active edge, 0-first, 1-second)");
-    iw_entry(iw, "cpha", "%d", (int)priv->cpha);
+    iw_entry_s(iw, "clock-output", str_yn(priv->clock_output));
+    iw_comment(iw, "Clock polarity: 0,1");
+    iw_entry_d(iw, "cpol", priv->cpol);
+    iw_comment(iw, "Clock phase: 0,1");
+    iw_entry_d(iw, "cpha", priv->cpha);
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Generate RS485 Driver Enable signal (Y,N) - uses RTS pin");
-    iw_entry(iw, "de-output", str_yn(priv->de_output));
+    iw_entry_s(iw, "de-output", str_yn(priv->de_output));
     iw_comment(iw, "DE active level: 0,1");
-    iw_entry(iw, "de-polarity", "%d", (int)(priv->de_polarity));
+    iw_entry_d(iw, "de-polarity", (priv->de_polarity));
     iw_comment(iw, "DE assert time (0-31)");
-    iw_entry(iw, "de-assert-time", "%d", (int)(priv->de_assert_time));
+    iw_entry_d(iw, "de-assert-time", (priv->de_assert_time));
     iw_comment(iw, "DE clear time (0-31)");
-    iw_entry(iw, "de-clear-time", "%d", (int)(priv->de_clear_time));
+    iw_entry_d(iw, "de-clear-time", (priv->de_clear_time));
 }

utils/avr_atoi.c

@@ -1,35 +0,0 @@
-/* Copyright (c) 2002, Marek Michalkiewicz
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-   * Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   * Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-   * Neither the name of the copyright holders nor the names of
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-  POSSIBILITY OF SUCH DAMAGE. */
-
-#include "avrlibc.h"
-
-int
-avr_atoi(const char *p)
-{
-	return (int) avr_atol(p);
-}

utils/avr_atol.c

@@ -1,36 +0,0 @@
-/* Copyright (c) 2002, Marek Michalkiewicz
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-   * Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   * Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-   * Neither the name of the copyright holders nor the names of
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-  POSSIBILITY OF SUCH DAMAGE. */
-
-#include <stdlib.h>
-#include "avrlibc.h"
-
-long
-avr_atol(const char *p)
-{
-	return avr_strtol(p, (char **) NULL, 10);
-}

utils/avr_strtod.c

@@ -37,10 +37,10 @@
 #include <stdint.h>
 #include "avrlibc.h"
 
-/* Only GCC 4.2 calls the library function to convert an unsigned long
+/* Only GCC 4.2 calls the library function to convert an uint32_t
    to float.  Other GCC-es (including 4.3) use a signed long to float
    conversion along with a large inline code to correct the result.	*/
-extern double __floatunsisf (unsigned long);
+extern double __floatunsisf (uint32_t);
 
 static const float pwr_p10 [6] = {
     1e+1, 1e+2, 1e+4, 1e+8, 1e+16, 1e+32
@@ -84,13 +84,13 @@ double
 avr_strtod (const char * nptr, char ** endptr)
 {
     union {
-	unsigned long u32;
+		uint32_t u32;
 		float flt;
     } x;
-    unsigned char c;
-    int exp;
+    char c;
+    int32_t exp;
 
-    unsigned char flag;
+    uint8_t flag;
 #define FL_MINUS    0x01	/* number is negative	*/
 #define FL_ANY	    0x02	/* any digit was readed	*/
 #define FL_OVFL	    0x04	/* overflow was		*/
@@ -178,7 +178,7 @@ avr_strtod (const char * nptr, char ** endptr)
 	    do {
 		if (i < 3200)
 		    i = (((i << 2) + i) << 1) + c;	/* i = 10*i + c	*/
-		c = *nptr++ - '0';
+		c = (char) (*nptr++ - '0');
 	    } while (c <= 9);
 	    if (flag & FL_MEXP)
 		i = -i;
@@ -189,7 +189,7 @@ avr_strtod (const char * nptr, char ** endptr)
     if ((flag & FL_ANY) && endptr)
 	*endptr = (char *)nptr - 1;
     
-    x.flt = __floatunsisf (x.u32);		/* manually	*/
+    x.flt = (float) __floatunsisf (x.u32);		/* manually	*/
     if ((flag & FL_MINUS) && (flag & FL_ANY))
 	x.flt = -x.flt;
 	
@@ -204,7 +204,7 @@ avr_strtod (const char * nptr, char ** endptr)
 	for (pwr = 32; pwr; pwr >>= 1) {
 	    for (; exp >= pwr; exp -= pwr) {
 		union {
-		    unsigned long u32;
+		    uint32_t u32;
 		    float flt;
 		} y;
 		y.u32 = (uint32_t) *((float *)nptr);
@@ -213,7 +213,7 @@ avr_strtod (const char * nptr, char ** endptr)
 	    nptr -= sizeof(float);
 	}
 	if (!isfinite(x.flt) || x.flt == 0)
-	    errno = ERANGE;
+		avrlibc_errno = ERANGE;
     }
 
     return x.flt;

utils/avr_strtol.c

@@ -32,6 +32,7 @@
 
 #include <limits.h>
 #include <errno.h>
+#include "avrlibc.h"
 
 /*
  * Convert a string to a long integer.
@@ -39,14 +40,14 @@
  * Ignores `locale' stuff.  Assumes that the upper and lower case
  * alphabets and digits are each contiguous.
  */
-long
-avr_strtol(const char *nptr, char **endptr, register int base)
+int32_t
+avr_strtol(const char *nptr, char **endptr, register int32_t base)
 {
-	register unsigned long acc;
-	register unsigned char c;
-	register unsigned long cutoff;
-	register signed char any;
-	unsigned char flag = 0;
+	register uint32_t acc;
+	register char c;
+	register uint32_t cutoff;
+	register int8_t any;
+	uint8_t flag = 0;
 #define FL_NEG	0x01		/* number is negative */
 #define FL_0X	0x02		/* number has a 0x prefix */
 
@@ -105,24 +106,24 @@ avr_strtol(const char *nptr, char **endptr, register int base)
 	 * Set any if any `digits' consumed; make it negative to indicate
 	 * overflow.
 	 */
-#if  LONG_MIN != -LONG_MAX - 1
+#if  INT32_MIN != -INT32_MAX - 1
 #  error "This implementation of strtol() does not work on this platform."
 #endif
 	switch (base) {
 	    case 10:
-		cutoff = ((unsigned long)LONG_MAX + 1) / 10;
+		cutoff = ((uint32_t)INT32_MAX + 1) / 10;
 		break;
 	    case 16:
-		cutoff = ((unsigned long)LONG_MAX + 1) / 16;
+		cutoff = ((uint32_t)INT32_MAX + 1) / 16;
 		break;
 	    case 8:
-		cutoff = ((unsigned long)LONG_MAX + 1) / 8;
+		cutoff = ((uint32_t)INT32_MAX + 1) / 8;
 		break;
 	    case 2:
-		cutoff = ((unsigned long)LONG_MAX + 1) / 2;
+		cutoff = ((uint32_t)INT32_MAX + 1) / 2;
 		break;
 	    default:
-		cutoff = ((unsigned long)LONG_MAX + 1) / base;
+		cutoff = ((uint32_t)INT32_MAX + 1) / base;
 	}
 
 	for (acc = 0, any = 0;; c = *nptr++) {
@@ -143,7 +144,7 @@ avr_strtol(const char *nptr, char **endptr, register int base)
 			continue;
 		}
 		acc = acc * base + c;
-		if (acc > (unsigned long)LONG_MAX + 1)
+		if (acc > (uint32_t)INT32_MAX + 1)
 			any = -1;
 		else
 			any = 1;
@@ -155,13 +156,13 @@ avr_strtol(const char *nptr, char **endptr, register int base)
 		    *endptr = (char *)nptr - 2;
 	}
 	if (any < 0) {
-		acc = (flag & FL_NEG) ? LONG_MIN : LONG_MAX;
-		errno = ERANGE;
+		acc = (flag & FL_NEG) ? INT32_MIN : INT32_MAX;
+		avrlibc_errno = ERANGE;
 	} else if (flag & FL_NEG) {
 		acc = -acc;
 	} else if ((signed long)acc < 0) {
-		acc = LONG_MAX;
-		errno = ERANGE;
+		acc = INT32_MAX;
+		avrlibc_errno = ERANGE;
 	}
 	return (acc);
 }

utils/avr_strtoul.c

@@ -35,18 +35,18 @@
 #include "avrlibc.h"
 
 /*
- * Convert a string to an unsigned long integer.
+ * Convert a string to an uint32_t integer.
  *
  * Ignores `locale' stuff.  Assumes that the upper and lower case
  * alphabets and digits are each contiguous.
  */
-unsigned long
-avr_strtoul(const char *nptr, char **endptr, register int base)
+uint32_t
+avr_strtoul(const char *nptr, char **endptr, register int32_t base)
 {
-	register unsigned long acc;
-	register unsigned char c;
-	register unsigned long cutoff;
-	register signed char any;
+	register uint32_t acc;
+	register char c;
+	register uint32_t cutoff;
+	register int8_t any;
 	unsigned char flag = 0;
 #define FL_NEG	0x01		/* number is negative */
 #define FL_0X	0x02		/* number has a 0x prefix */
@@ -102,10 +102,10 @@ avr_strtoul(const char *nptr, char **endptr, register int base)
 	 *
 	 */
 	switch (base) {
-		case 16:    cutoff = ULONG_MAX / 16;  break;
-		case 10:    cutoff = ULONG_MAX / 10;  break;
-		case 8:     cutoff = ULONG_MAX / 8;   break;
-		default:    cutoff = ULONG_MAX / base;
+		case 16:    cutoff = UINT32_MAX / 16;  break;
+		case 10:    cutoff = UINT32_MAX / 10;  break;
+		case 8:     cutoff = UINT32_MAX / 8;   break;
+		default:    cutoff = UINT32_MAX / base;
 	}
 
 	for (acc = 0, any = 0;; c = *nptr++) {
@@ -126,7 +126,7 @@ avr_strtoul(const char *nptr, char **endptr, register int base)
 			continue;
 		}
 		acc = acc * base + c;
-		any = (c > acc) ? -1 : 1;
+		any = (int8_t) ((c > acc) ? -1 : 1);
 	}
 
 	if (endptr) {
@@ -138,8 +138,8 @@ avr_strtoul(const char *nptr, char **endptr, register int base)
 	if (flag & FL_NEG)
 		acc = -acc;
 	if (any < 0) {
-		acc = ULONG_MAX;
-		errno = ERANGE;
+		acc = UINT32_MAX;
+		avrlibc_errno = ERANGE;
 	}
-	return (acc);
+	return (uint32_t) (acc);
 }

utils/avrlibc.c

@@ -0,0 +1,7 @@
+//
+// Created by MightyPork on 2018/02/23.
+//
+
+#include <stdint.h>
+
+volatile int32_t avrlibc_errno = 0;

utils/avrlibc.h

@@ -8,21 +8,10 @@
 #ifndef GEX_AVRLIBC_H_H
 #define GEX_AVRLIBC_H_H
 
-/**
- * atoi() - parse decimal int from ASCII
- *
- * @param p - string
- * @return int, 0 on failure
- */
-int avr_atoi(const char *p);
+#include <stdint.h>
+#include <stddef.h>
 
-/**
- * atol() - parse decimal long int from ASCII
- *
- * @param p - string
- * @return int, 0 on failure
- */
-long avr_atol(const char *p);
+extern volatile int32_t avrlibc_errno;
 
 /**
  * strtol() - parse integer number form string.
@@ -35,7 +24,39 @@ long avr_atol(const char *p);
  * @param base - base 2, 10, 16.... 0 for auto
  * @return the number
  */
-long avr_strtol(const char *nptr, char **endptr, register int base);
+int32_t avr_strtol(const char *nptr, char **endptr, register int32_t base);
+
+/**
+ * like strtol(), but unsigned (and hence higher max value)
+ *
+ * @param nptr - string to parse
+ * @param endptr - NULL or pointer to string where the end will be stored (first bad char)
+ * @param base - base 2, 10, 16.... 0 for auto
+ * @return the number
+ */
+uint32_t avr_strtoul(const char *nptr, char **endptr, register int32_t base);
+
+/**
+ * atol() - parse decimal long int from ASCII
+ *
+ * @param p - string
+ * @return int, 0 on failure
+ */
+static inline int32_t avr_atol(const char *p)
+{
+    return avr_strtol(p, (char **) NULL, 10);
+}
+
+/**
+ * atoi() - parse decimal int from ASCII
+ *
+ * @param p - string
+ * @return int, 0 on failure
+ */
+static inline int32_t avr_atoi(const char *p)
+{
+    return avr_atol(p);
+}
 
 /**
  * Parse double from ASCII
@@ -46,14 +67,4 @@ long avr_strtol(const char *nptr, char **endptr, register int base);
  */
 double avr_strtod (const char * nptr, char ** endptr);
 
-/**
- * like strtol(), but unsigned (and hence higher max value)
- *
- * @param nptr - string to parse
- * @param endptr - NULL or pointer to string where the end will be stored (first bad char)
- * @param base - base 2, 10, 16.... 0 for auto
- * @return the number
- */
-unsigned long avr_strtoul(const char *nptr, char **endptr, register int base);
-
 #endif //GEX_AVRLIBC_H_H

utils/error.h

@@ -28,6 +28,7 @@
     X(CHECKSUM_MISMATCH, NULL) /* bus checksum failed */ \
     X(PROTOCOL_BREACH, NULL)   /* eating with the wrong spoon */  \
     X(BUSY, NULL)              /* Unit is busy */ \
+    X(BAD_MODE, NULL)        /* Command not permissible in current opmode */ \
     \
     /* VFS user errors (those are meant to be shown to user) */ \
     X(VFS_ERROR_DURING_TRANSFER, "Error during transfer") \

utils/ini_parser.c

@@ -1,526 +1,135 @@
-
-/* #line 1 "ini_parser.rl" */
-
-/* Ragel constants block */
 #include "ini_parser.h"
 
-// Ragel setup
-
-/* #line 10 "ini_parser.c" */
-static const char _ini_actions[] = {
-	0, 1, 1, 1, 2, 1, 3, 1, 
-	4, 1, 5, 1, 6, 1, 7, 1, 
-	8, 1, 9, 1, 10, 1, 11, 1, 
-	13, 2, 0, 4, 2, 12, 4
+enum nini_state {
+    NINI_IDLE,
+    NINI_SECTION,
+    NINI_KEY,
+    NINI_VALUE,
+    NINI_COMMENT,
 };
 
-static const char _ini_eof_actions[] = {
-	0, 23, 5, 5, 15, 15, 15, 15, 
-	19, 19, 0, 0, 0, 0, 0, 0, 
-	0
-};
+static struct {
+    uint8_t section_i;
+    char section[INI_KEY_MAX];
 
-static const int ini_start = 1;
-static const int ini_first_final = 12;
-static const int ini_error = 0;
+    uint8_t key_i;
+    char key[INI_KEY_MAX];
 
-static const int ini_en_section = 2;
-static const int ini_en_keyvalue = 4;
-static const int ini_en_comment = 8;
-static const int ini_en_discard2eol = 10;
-static const int ini_en_main = 1;
+    uint8_t value_i;
+    char value[INI_VALUE_MAX];
+    bool val_last_space;
 
+    IniParserCallback cb;
+    void *userdata;
+    enum nini_state state;
+} nini;
 
-/* #line 10 "ini_parser.rl" */
-
-
-// Persistent state
-static int8_t cs = -1; //!< Ragel's Current State variable
-static uint32_t buff_i = 0; //!< Write pointer for the buffers
-static char value_quote = 0; //!< Quote character of the currently collected value
-static bool value_nextesc = false; //!< Next character is escaped, trated specially, and if quote, as literal quote character
-static IniParserCallback keyCallback = NULL; //!< Currently assigned callback
-static void *userdata = NULL; //!< Currently assigned user data for the callback
-
-// Buffers
-static char keybuf[INI_KEY_MAX];
-static char secbuf[INI_KEY_MAX+10];
-static char valbuf[INI_VALUE_MAX];
-
-// See header for doxygen!
-
-void
-ini_parse_reset_partial(void)
+void ini_parse_begin(IniParserCallback callback, void *userData)
 {
-	buff_i = 0;
-	value_quote = 0;
-	value_nextesc = false;
-}
-
-void
-ini_parse_reset(void)
-{
-	ini_parse_reset_partial();
-	keybuf[0] = secbuf[0] = valbuf[0] = 0;
-	
-/* #line 67 "ini_parser.c" */
-	{
-	cs = ini_start;
-	}
-
-/* #line 41 "ini_parser.rl" */
-}
-
-void
-ini_parser_error(const char* msg)
-{
-	ini_error("Parser error: %s", msg);
-	ini_parse_reset_partial();
-}
-
-
-void
-ini_parse_begin(IniParserCallback callback, void *userData)
-{
-	keyCallback = callback;
-	userdata = userData;
     ini_parse_reset();
+    nini.cb = callback;
+    nini.userdata = userData;
 }
 
-
-void
-*ini_parse_end(void)
+void ini_parse(const char *data, size_t len)
 {
-	ini_parse("\n", 1);
-	if (keyCallback) {
-		keyCallback = NULL;
+    for (; len > 0; len--) {
+        char c = *data++;
+        if (c == ' ' || c == '\t' || c == '\r' || c == '\n') {
+            if (nini.state != NINI_VALUE && nini.state != NINI_COMMENT)
+                continue;
         }
 
-	void *ud = userdata;
-	userdata = NULL;
-	return ud;
+        switch (nini.state) {
+            case NINI_IDLE:
+                if (c == '[') {
+                    nini.state = NINI_SECTION;
+                    nini.section_i = 0;
+                }
+                else if (c == '#') {
+                    nini.state = NINI_COMMENT;
+                }
+                else {
+                    nini.state = NINI_KEY;
+                    nini.key_i = 0;
+                    nini.value_i = 0;
+                    nini.val_last_space = false;
+                    nini.key[nini.key_i++] = c;
+                }
+                break;
+
+            case NINI_COMMENT:
+                if (c == '\n' || c == '\r') {
+                    nini.state = NINI_IDLE;
+                }
+                break;
+
+            case NINI_SECTION:
+                if (c == ']') {
+                    nini.section[nini.section_i] = 0;
+                    nini.state = NINI_COMMENT; // discard to EOL
+                    break;
+                }
+                else if (nini.section_i < INI_KEY_MAX - 1) {
+                    nini.section[nini.section_i++] = c;
+                }
+                break;
+
+            case NINI_KEY:
+                if (c == '=') {
+                    nini.key[nini.key_i] = 0;
+                    nini.state = NINI_VALUE;
+                }
+                else if (nini.key_i < INI_KEY_MAX - 1) {
+                    nini.key[nini.key_i++] = c;
+                }
+                break;
+
+            case NINI_VALUE:
+                switch (c) {
+                    case ' ':
+                    case '\t':
+                        if (nini.value_i) nini.val_last_space = true;
+                        break;
+                    case '\r':
+                    case '\n':
+                        nini.value[nini.value_i] = 0;
+                        nini.state = NINI_IDLE;
+                        nini.cb(nini.section, nini.key, nini.value, nini.userdata);
+                        break;
+                    default:
+                        if (nini.val_last_space && nini.value_i < INI_VALUE_MAX - 1) {
+                            nini.value[nini.value_i++] = ' ';
                         }
 
+                        if (nini.value_i < INI_VALUE_MAX - 1) {
+                            nini.value[nini.value_i++] = c;
+                        }
+                        nini.val_last_space = false;
+                }
+        }
+    }
+}
 
-void
-ini_parse_file(const char *text, size_t len, IniParserCallback callback, void *userData)
+void *ini_parse_end(void)
+{
+    if (nini.state == NINI_VALUE) {
+        nini.value[nini.value_i] = 0;
+        nini.state = NINI_IDLE;
+        nini.cb(nini.section, nini.key, nini.value, nini.userdata);
+    }
+
+    return nini.userdata;
+}
+
+void ini_parse_file(const char *text, size_t len, IniParserCallback callback, void *userData)
 {
     ini_parse_begin(callback, userData);
     ini_parse(text, len);
     ini_parse_end();
 }
 
-static void
-rtrim_buf(char *buf, int32_t end)
+void ini_parse_reset(void)
 {
-	if (end > 0) {
-		while ((uint8_t)buf[--end] < 33);
-		end++; // go past the last character
-	}
-
-	buf[end] = 0;
-}
-
-
-void
-ini_parse(const char *newstr, size_t len)
-{
-	int32_t i;
-	char c;
-	bool isnl;
-	bool isquot;
-
-	// Load new data to Ragel vars
-	const uint8_t *p;
-	const uint8_t *eof;
-	const uint8_t *pe;
-
-	if (len == 0) while(newstr[++len] != 0); // alternative to strlen
-
-	p = (const uint8_t *) newstr;
-	eof = NULL;
-	pe = (const uint8_t *) (newstr + len);
-
-	// Init Ragel on the first run
-	if (cs == -1) {
-		ini_parse_reset();
-	}
-
-	// The parser
-	
-/* #line 152 "ini_parser.c" */
-	{
-	const char *_acts;
-	unsigned int _nacts;
-
-	if ( p == pe )
-		goto _test_eof;
-	if ( cs == 0 )
-		goto _out;
-_resume:
-	switch ( cs ) {
-case 1:
-	switch( (*p) ) {
-		case 32u: goto tr1;
-		case 35u: goto tr3;
-		case 58u: goto tr0;
-		case 59u: goto tr3;
-		case 61u: goto tr0;
-		case 91u: goto tr4;
-	}
-	if ( (*p) < 9u ) {
-		if ( (*p) <= 8u )
-			goto tr0;
-	} else if ( (*p) > 13u ) {
-		if ( 14u <= (*p) && (*p) <= 31u )
-			goto tr0;
-	} else
-		goto tr1;
-	goto tr2;
-case 0:
-	goto _out;
-case 12:
-	goto tr0;
-case 2:
-	switch( (*p) ) {
-		case 9u: goto tr6;
-		case 32u: goto tr6;
-		case 93u: goto tr5;
-	}
-	if ( (*p) <= 31u )
-		goto tr5;
-	goto tr7;
-case 3:
-	if ( (*p) == 93u )
-		goto tr8;
-	if ( (*p) > 8u ) {
-		if ( 10u <= (*p) && (*p) <= 31u )
-			goto tr5;
-	} else
-		goto tr5;
-	goto tr7;
-case 13:
-	goto tr5;
-case 4:
-	switch( (*p) ) {
-		case 10u: goto tr10;
-		case 58u: goto tr11;
-		case 61u: goto tr11;
-	}
-	goto tr9;
-case 5:
-	switch( (*p) ) {
-		case 9u: goto tr13;
-		case 10u: goto tr14;
-		case 13u: goto tr15;
-		case 32u: goto tr13;
-	}
-	goto tr12;
-case 6:
-	switch( (*p) ) {
-		case 10u: goto tr14;
-		case 13u: goto tr15;
-	}
-	goto tr12;
-case 14:
-	goto tr10;
-case 7:
-	if ( (*p) == 10u )
-		goto tr14;
-	goto tr10;
-case 8:
-	switch( (*p) ) {
-		case 10u: goto tr17;
-		case 13u: goto tr18;
-	}
-	goto tr16;
-case 15:
-	goto tr19;
-case 9:
-	if ( (*p) == 10u )
-		goto tr17;
-	goto tr19;
-case 10:
-	switch( (*p) ) {
-		case 10u: goto tr21;
-		case 13u: goto tr22;
-	}
-	goto tr20;
-case 16:
-	goto tr23;
-case 11:
-	if ( (*p) == 10u )
-		goto tr21;
-	goto tr23;
-	}
-
-	tr23: cs = 0; goto _again;
-	tr0: cs = 0; goto f0;
-	tr5: cs = 0; goto f4;
-	tr10: cs = 0; goto f7;
-	tr19: cs = 0; goto f11;
-	tr1: cs = 1; goto _again;
-	tr6: cs = 2; goto _again;
-	tr7: cs = 3; goto f5;
-	tr9: cs = 4; goto f8;
-	tr13: cs = 5; goto _again;
-	tr11: cs = 5; goto f9;
-	tr12: cs = 6; goto f10;
-	tr15: cs = 7; goto _again;
-	tr16: cs = 8; goto _again;
-	tr18: cs = 9; goto _again;
-	tr20: cs = 10; goto _again;
-	tr22: cs = 11; goto _again;
-	tr2: cs = 12; goto f1;
-	tr3: cs = 12; goto f2;
-	tr4: cs = 12; goto f3;
-	tr8: cs = 13; goto f6;
-	tr14: cs = 14; goto f10;
-	tr17: cs = 15; goto f12;
-	tr21: cs = 16; goto f13;
-
-	f5: _acts = _ini_actions + 1; goto execFuncs;
-	f6: _acts = _ini_actions + 3; goto execFuncs;
-	f4: _acts = _ini_actions + 5; goto execFuncs;
-	f1: _acts = _ini_actions + 7; goto execFuncs;
-	f8: _acts = _ini_actions + 9; goto execFuncs;
-	f9: _acts = _ini_actions + 11; goto execFuncs;
-	f10: _acts = _ini_actions + 13; goto execFuncs;
-	f7: _acts = _ini_actions + 15; goto execFuncs;
-	f12: _acts = _ini_actions + 17; goto execFuncs;
-	f11: _acts = _ini_actions + 19; goto execFuncs;
-	f13: _acts = _ini_actions + 21; goto execFuncs;
-	f0: _acts = _ini_actions + 23; goto execFuncs;
-	f3: _acts = _ini_actions + 25; goto execFuncs;
-	f2: _acts = _ini_actions + 28; goto execFuncs;
-
-execFuncs:
-	_nacts = *_acts++;
-	while ( _nacts-- > 0 ) {
-		switch ( *_acts++ ) {
-	case 0:
-/* #line 130 "ini_parser.rl" */
-	{
-			buff_i = 0;
-			{cs = 2;goto _again;}
-		}
-	break;
-	case 1:
-/* #line 135 "ini_parser.rl" */
-	{
-			if (buff_i >= INI_KEY_MAX) {
-				ini_parser_error("Section name too long");
-				{cs = 10;goto _again;}
-			}
-			keybuf[buff_i++] = (*p);
-		}
-	break;
-	case 2:
-/* #line 143 "ini_parser.rl" */
-	{
-			// we need a separate buffer for the result, otherwise a failed
-			// partial parse would corrupt the section string
-			rtrim_buf(keybuf, buff_i);
-			for (i = 0; (c = keybuf[i]) != 0; i++) secbuf[i] = c;
-			secbuf[i] = 0;
-			{cs = 1;goto _again;}
-		}
-	break;
-	case 3:
-/* #line 155 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in [section]");
-				if((*p) == '\n') {cs = 1;goto _again;} else {cs = 10;goto _again;}
-			}
-	break;
-	case 4:
-/* #line 162 "ini_parser.rl" */
-	{
-			buff_i = 0;
-			keybuf[buff_i++] = (*p); // add the first char
-			{cs = 4;goto _again;}
-		}
-	break;
-	case 5:
-/* #line 168 "ini_parser.rl" */
-	{
-			if (buff_i >= INI_KEY_MAX) {
-				ini_parser_error("Key too long");
-				{cs = 10;goto _again;}
-			}
-			keybuf[buff_i++] = (*p);
-		}
-	break;
-	case 6:
-/* #line 176 "ini_parser.rl" */
-	{
-			rtrim_buf(keybuf, buff_i);
-
-			// --- Value begin ---
-			buff_i = 0;
-			value_quote = 0;
-			value_nextesc = false;
-		}
-	break;
-	case 7:
-/* #line 185 "ini_parser.rl" */
-	{
-			isnl = ((*p) == '\r' || (*p) == '\n');
-			isquot = ((*p) == '\'' || (*p) == '"');
-
-			// detect our starting quote
-			if (isquot && !value_nextesc && buff_i == 0 && value_quote == 0) {
-				value_quote = (*p);
-				goto valueCharDone;
-			}
-
-			if (buff_i >= INI_VALUE_MAX) {
-				ini_parser_error("Value too long");
-				{cs = 10;goto _again;}
-			}
-
-			// end of string - clean up and report
-			if ((!value_nextesc && (*p) == value_quote) || isnl) {
-				if (isnl && value_quote) {
-					ini_parser_error("Unterminated string");
-					{cs = 1;goto _again;}
-				}
-
-				// unquoted: trim from the end
-				if (!value_quote) {
-					rtrim_buf(valbuf, buff_i);
-				} else {
-					valbuf[buff_i] = 0;
-				}
-
-				if (keyCallback) {
-					keyCallback(secbuf, keybuf, valbuf, userdata);
-				}
-
-				// we don't want to discard to eol if the string was terminated by eol
-				// - would delete the next line
-
-				if (isnl) {cs = 1;goto _again;} else {cs = 10;goto _again;}
-			}
-
-			c = (*p);
-			// escape...
-			if (value_nextesc) {
-				if ((*p) == 'n') c = '\n';
-				else if ((*p) == 'r') c = '\r';
-				else if ((*p) == 't') c = '\t';
-				else if ((*p) == 'e') c = '\033';
-			}
-
-			// collecting characters...
-			if (value_nextesc || (*p) != '\\') { // is quoted, or is not a quoting backslash - literal character
-				valbuf[buff_i++] = c;
-			}
-
-			value_nextesc = (!value_nextesc && (*p) == '\\');
-valueCharDone:;
-		}
-	break;
-	case 8:
-/* #line 247 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in key=value");
-				if((*p) == '\n') {cs = 1;goto _again;} else {cs = 10;goto _again;}
-			}
-	break;
-	case 9:
-/* #line 257 "ini_parser.rl" */
-	{ {cs = 1;goto _again;} }
-	break;
-	case 10:
-/* #line 258 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in comment");
-				if((*p) == '\n') {cs = 1;goto _again;} else {cs = 10;goto _again;}
-			}
-	break;
-	case 11:
-/* #line 265 "ini_parser.rl" */
-	{ {cs = 1;goto _again;} }
-	break;
-	case 12:
-/* #line 273 "ini_parser.rl" */
-	{ {cs = 8;goto _again;} }
-	break;
-	case 13:
-/* #line 276 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in root");
-				{cs = 10;goto _again;}
-			}
-	break;
-/* #line 458 "ini_parser.c" */
-		}
-	}
-	goto _again;
-
-_again:
-	if ( cs == 0 )
-		goto _out;
-	if ( ++p != pe )
-		goto _resume;
-	_test_eof: {}
-	if ( p == eof )
-	{
-	const char *__acts = _ini_actions + _ini_eof_actions[cs];
-	unsigned int __nacts = (unsigned int) *__acts++;
-	while ( __nacts-- > 0 ) {
-		switch ( *__acts++ ) {
-	case 3:
-/* #line 155 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in [section]");
-				if((*p) == '\n') {cs = 1;	if ( p == pe )
-		goto _test_eof;
-goto _again;} else {cs = 10;	if ( p == pe )
-		goto _test_eof;
-goto _again;}
-			}
-	break;
-	case 8:
-/* #line 247 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in key=value");
-				if((*p) == '\n') {cs = 1;	if ( p == pe )
-		goto _test_eof;
-goto _again;} else {cs = 10;	if ( p == pe )
-		goto _test_eof;
-goto _again;}
-			}
-	break;
-	case 10:
-/* #line 258 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in comment");
-				if((*p) == '\n') {cs = 1;	if ( p == pe )
-		goto _test_eof;
-goto _again;} else {cs = 10;	if ( p == pe )
-		goto _test_eof;
-goto _again;}
-			}
-	break;
-	case 13:
-/* #line 276 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in root");
-				{cs = 10;	if ( p == pe )
-		goto _test_eof;
-goto _again;}
-			}
-	break;
-/* #line 517 "ini_parser.c" */
-		}
-	}
-	}
-
-	_out: {}
-	}
-
-/* #line 283 "ini_parser.rl" */
-
+    nini.state = NINI_IDLE;
 }

utils/ini_parser.h

@@ -1,6 +1,5 @@
 //
-// INI file parser with a FSM generated by Ragel. This was originally written for ESPTerm
-// Used to extract sections, keys and values from user-provided settings file
+// INI file parser. Used to extract sections, keys and values from user-provided settings file
 //
 
 #ifndef INIPARSE_STREAM_H
@@ -8,13 +7,6 @@
 
 #include "platform.h"
 
-// toggleable logging func
-#ifdef DEBUG_INI
-#define ini_error(fmt, ...) dbg("! INI err: "#fmt, ##__VA_ARGS__)
-#else
-#define ini_error(fmt, ...)
-#endif
-
 // buffer sizes
 //#define INI_KEY_MAX 20
 //#define INI_VALUE_MAX 30 // moved to plat_compat.h

utils/ini_parser.rl

@@ -1,284 +0,0 @@
-
-/* Ragel constants block */
-#include "ini_parser.h"
-
-// Ragel setup
-%%{
-	machine ini;
-	write data;
-	alphtype unsigned char;
-}%%
-
-// Persistent state
-static int8_t cs = -1; //!< Ragel's Current State variable
-static uint32_t buff_i = 0; //!< Write pointer for the buffers
-static char value_quote = 0; //!< Quote character of the currently collected value
-static bool value_nextesc = false; //!< Next character is escaped, trated specially, and if quote, as literal quote character
-static IniParserCallback keyCallback = NULL; //!< Currently assigned callback
-static void *userdata = NULL; //!< Currently assigned user data for the callback
-
-// Buffers
-static char keybuf[INI_KEY_MAX];
-static char secbuf[INI_KEY_MAX];
-static char valbuf[INI_VALUE_MAX];
-
-// See header for doxygen!
-
-void
-ini_parse_reset_partial(void)
-{
-	buff_i = 0;
-	value_quote = 0;
-	value_nextesc = false;
-}
-
-void
-ini_parse_reset(void)
-{
-	ini_parse_reset_partial();
-	keybuf[0] = secbuf[0] = valbuf[0] = 0;
-	%% write init;
-}
-
-void
-ini_parser_error(const char* msg)
-{
-	ini_error("Parser error: %s", msg);
-	ini_parse_reset_partial();
-}
-
-
-void
-ini_parse_begin(IniParserCallback callback, void *userData)
-{
-	keyCallback = callback;
-	userdata = userData;
-	ini_parse_reset();
-}
-
-
-void
-*ini_parse_end(void)
-{
-	ini_parse("\n", 1);
-	if (keyCallback) {
-		keyCallback = NULL;
-	}
-
-	void *ud = userdata;
-	userdata = NULL;
-	return ud;
-}
-
-
-void
-ini_parse_file(const char *text, size_t len, IniParserCallback callback, void *userData)
-{
-	ini_parse_begin(callback, userData);
-	ini_parse(text, len);
-	ini_parse_end();
-}
-
-static void
-rtrim_buf(char *buf, int32_t end)
-{
-	if (end > 0) {
-		while ((uint8_t)buf[--end] < 33);
-		end++; // go past the last character
-	}
-
-	buf[end] = 0;
-}
-
-
-void
-ini_parse(const char *newstr, size_t len)
-{
-	int32_t i;
-	char c;
-	bool isnl;
-	bool isquot;
-
-	// Load new data to Ragel vars
-	const uint8_t *p;
-	const uint8_t *eof;
-	const uint8_t *pe;
-
-	if (len == 0) while(newstr[++len] != 0); // alternative to strlen
-
-	p = (const uint8_t *) newstr;
-	eof = NULL;
-	pe = (const uint8_t *) (newstr + len);
-
-	// Init Ragel on the first run
-	if (cs == -1) {
-		ini_parse_reset();
-	}
-
-	// The parser
-	%%{
-#/ *
-		ispace = [ \t]; # inline space
-		wchar  = any - 0..8 - 10..31;
-		#apos  = '\'';
-		#quot  = '\"';
-		nonl   = [^\r\n];
-		nl     = '\r'? '\n';
-
-		# ---- [SECTION] ----
-
-		action sectionStart {
-			buff_i = 0;
-			fgoto section;
-		}
-
-		action sectionChar {
-			if (buff_i >= INI_KEY_MAX) {
-				ini_parser_error("Section name too long");
-				fgoto discard2eol;
-			}
-			keybuf[buff_i++] = fc;
-		}
-
-		action sectionEnd {
-			// we need a separate buffer for the result, otherwise a failed
-			// partial parse would corrupt the section string
-			rtrim_buf(keybuf, buff_i);
-			for (i = 0; (c = keybuf[i]) != 0; i++) secbuf[i] = c;
-			secbuf[i] = 0;
-			fgoto main;
-		}
-
-		section :=
-			(
-				ispace* <: ((wchar - ']')+ @sectionChar) ']' @sectionEnd
-			) $!{
-				ini_parser_error("Syntax error in [section]");
-				if(fc == '\n') fgoto main; else fgoto discard2eol;
-			};
-
-		# ---- KEY=VALUE ----
-
-		action keyStart {
-			buff_i = 0;
-			keybuf[buff_i++] = fc; // add the first char
-			fgoto keyvalue;
-		}
-
-		action keyChar {
-			if (buff_i >= INI_KEY_MAX) {
-				ini_parser_error("Key too long");
-				fgoto discard2eol;
-			}
-			keybuf[buff_i++] = fc;
-		}
-
-		action keyEnd {
-			rtrim_buf(keybuf, buff_i);
-
-			// --- Value begin ---
-			buff_i = 0;
-			value_quote = 0;
-			value_nextesc = false;
-		}
-
-		action valueChar {
-			isnl = (fc == '\r' || fc == '\n');
-			isquot = (fc == '\'' || fc == '"');
-
-			// detect our starting quote
-			if (isquot && !value_nextesc && buff_i == 0 && value_quote == 0) {
-				value_quote = fc;
-				goto valueCharDone;
-			}
-
-			if (buff_i >= INI_VALUE_MAX) {
-				ini_parser_error("Value too long");
-				fgoto discard2eol;
-			}
-
-			// end of string - clean up and report
-			if ((!value_nextesc && fc == value_quote) || isnl) {
-				if (isnl && value_quote) {
-					ini_parser_error("Unterminated string");
-					fgoto main;
-				}
-
-				// unquoted: trim from the end
-				if (!value_quote) {
-					rtrim_buf(valbuf, buff_i);
-				} else {
-					valbuf[buff_i] = 0;
-				}
-
-				if (keyCallback) {
-					keyCallback(secbuf, keybuf, valbuf, userdata);
-				}
-
-				// we don't want to discard to eol if the string was terminated by eol
-				// - would delete the next line
-
-				if (isnl) fgoto main; else fgoto discard2eol;
-			}
-
-			c = fc;
-			// escape...
-			if (value_nextesc) {
-				if (fc == 'n') c = '\n';
-				else if (fc == 'r') c = '\r';
-				else if (fc == 't') c = '\t';
-				else if (fc == 'e') c = '\033';
-			}
-
-			// collecting characters...
-			if (value_nextesc || fc != '\\') { // is quoted, or is not a quoting backslash - literal character
-				valbuf[buff_i++] = c;
-			}
-
-			value_nextesc = (!value_nextesc && fc == '\\');
-valueCharDone:;
-		}
-
-		# use * for key, first char is already consumed.
-		keyvalue :=
-			(
-				([^\n=:]* @keyChar %keyEnd)
-				[=:] ispace* <: nonl* @valueChar nl @valueChar
-			) $!{
-				ini_parser_error("Syntax error in key=value");
-				if(fc == '\n') fgoto main; else fgoto discard2eol;
-			};
-
-		# ---- COMMENT ----
-
-		comment :=
-			(
-				nonl* nl
-				@{ fgoto main; }
-			) $!{
-				ini_parser_error("Syntax error in comment");
-				if(fc == '\n') fgoto main; else fgoto discard2eol;
-			};
-
-		# ---- CLEANUP ----
-
-		discard2eol := nonl* nl @{ fgoto main; };
-
-		# ---- ROOT ----
-
-		main :=
-			(space*
-				(
-					'[' @sectionStart |
-					[#;] @{ fgoto comment; } |
-					(wchar - [\t =:]) @keyStart
-				)
-			) $!{
-				ini_parser_error("Syntax error in root");
-				fgoto discard2eol;
-			};
-
-		write exec;
-#*/
-	}%%
-}

utils/ini_writer.c

@@ -119,6 +119,25 @@ void iw_entry(IniWriter *iw, const char *key, const char *format, ...)
     iw_newline(iw);	// one newline after entry
 }
 
+void iw_entry_s(IniWriter *iw, const char *key, const char *value)
+{
+    if (iw->count == 0) return;
+    iw_string(iw, key);
+    iw_string(iw, "=");
+    iw_string(iw, value);
+    iw_newline(iw);
+}
+
+void iw_entry_d(IniWriter *iw, const char *key, int32_t value)
+{
+    if (iw->count == 0) return;
+    iw_string(iw, key);
+    iw_string(iw, "=");
+    uint32_t len = (int)fixup_snprintf(&iwbuffer[0], IWBUFFER_LEN, "%d", value);
+    iw_buff(iw, (uint8_t *) iwbuffer, len);
+    iw_newline(iw);
+}
+
 uint32_t iw_measure_total(void (*handler)(IniWriter *), uint32_t tag)
 {
     IniWriter iw = iw_init(NULL, 0xFFFFFFFF, 1);

utils/ini_writer.h

@@ -126,6 +126,9 @@ __attribute__((format(printf,2,3)));
 void iw_entry(IniWriter *iw, const char *key, const char *format, ...)
     __attribute__((format(printf,3,4)));
 
+void iw_entry_s(IniWriter *iw, const char *key, const char *value);
+void iw_entry_d(IniWriter *iw, const char *key, int32_t value);
+
 /**
  * Measure total ini writer length using a dummy write
  *

utils/payload_parser.c

@@ -1,3 +1,4 @@
+#include <debug.h>
 #include "payload_parser.h"
 
 #define pp_check_capacity(pp, needed) \
@@ -58,32 +59,21 @@ uint32_t pp_u32(PayloadParser *pp)
 
 uint64_t pp_u64(PayloadParser *pp)
 {
-    pp_check_capacity(pp, 4);
+    pp_check_capacity(pp, 8);
     if (!pp->ok) return 0;
 
-    uint64_t x = 0;
+    uint32_t x0, x1;
+    uint64_t x;
 
     if (pp->bigendian) {
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 56);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 48);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 40);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 32);
-
-        x |= (uint64_t) (*pp->current++ << 24);
-        x |= (uint64_t) (*pp->current++ << 16);
-        x |= (uint64_t) (*pp->current++ << 8);
-        x |= *pp->current++;
+        x1 = pp_u32(pp);
+        x0 = pp_u32(pp);
     } else {
-        x |= *pp->current++;
-        x |= (uint64_t) (*pp->current++ << 8);
-        x |= (uint64_t) (*pp->current++ << 16);
-        x |= (uint64_t) (*pp->current++ << 24);
-
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 32);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 40);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 48);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 56);
+        x0 = pp_u32(pp);
+        x1 = pp_u32(pp);
     }
+    x = ((uint64_t)x1)<<32 | x0;
+
     return x;
 }
 

utils/snprintf.c

@@ -190,7 +190,7 @@ static size_t dopr(char *buffer, size_t maxlen, const char *format, va_list args
 {
     char ch;
     LLONG value;
-    LDOUBLE fvalue;
+    LDOUBLE fvalue = 0;
     char *strvalue;
     int min;
     int max;

utils/str_utils.c

@@ -5,110 +5,3 @@
 #include "str_utils.h"
 #include "platform.h"
 #include "avrlibc.h"
-
-bool str_parse_yn(const char *str, bool *suc)
-{
-    // TODO implement strcasecmp without the locale crap from newlib and use it here
-    if (streq(str, "Y")) return true;
-    if (streq(str, "N")) return false;
-
-    if (streq(str, "1")) return true;
-    if (streq(str, "0")) return false;
-
-    if (streq(str, "YES")) return true;
-    if (streq(str, "NO")) return false;
-
-    *suc = false;
-    return false;
-}
-
-uint8_t str_parse_01(const char *str, const char *a, const char *b, bool *suc)
-{
-    if (streq(str, a)) return 0;
-    if (streq(str, b)) return 1;
-
-    *suc = false;
-    return 0;
-}
-
-uint8_t str_parse_012(const char *str, const char *a, const char *b, const char *c, bool *suc)
-{
-    if (streq(str, a)) return 0;
-    if (streq(str, b)) return 1;
-    if (streq(str, c)) return 2;
-
-    *suc = false;
-    return 0;
-}
-
-/** Convert number to one of 2 options */
-const char *str_2(uint32_t n,
-                  uint32_t na, const char *a,
-                  uint32_t nb, const char *b)
-{
-    if (n == nb) return b;
-    return a;
-}
-
-/** Convert number to one of 3 options */
-const char *str_3(uint32_t n,
-                  uint32_t na, const char *a,
-                  uint32_t nb, const char *b,
-                  uint32_t nc, const char *c)
-{
-    if (n == nb) return b;
-    if (n == nc) return c;
-    return a;
-}
-
-/** Convert number to one of 4 options */
-const char *str_4(uint32_t n,
-                  uint32_t na, const char *a,
-                  uint32_t nb, const char *b,
-                  uint32_t nc, const char *c,
-                  uint32_t nd, const char *d)
-{
-    if (n == nb) return b;
-    if (n == nc) return c;
-    if (n == nd) return d;
-    return a;
-}
-
-uint32_t str_parse_2(const char *tpl,
-                     const char *a, uint32_t na,
-                     const char *b, uint32_t nb,
-                     bool *suc)
-{
-    if (streq(tpl, a)) return na;
-    if (streq(tpl, b)) return nb;
-    *suc = false;
-    return na;
-}
-
-uint32_t str_parse_3(const char *tpl,
-                     const char *a, uint32_t na,
-                     const char *b, uint32_t nb,
-                     const char *c, uint32_t nc,
-                     bool *suc)
-{
-    if (streq(tpl, a)) return na;
-    if (streq(tpl, b)) return nb;
-    if (streq(tpl, c)) return nc;
-    *suc = false;
-    return na;
-}
-
-uint32_t str_parse_4(const char *tpl,
-                     const char *a, uint32_t na,
-                     const char *b, uint32_t nb,
-                     const char *c, uint32_t nc,
-                     const char *d, uint32_t nd,
-                     bool *suc)
-{
-    if (streq(tpl, a)) return na;
-    if (streq(tpl, b)) return nb;
-    if (streq(tpl, c)) return nc;
-    if (streq(tpl, d)) return nd;
-    *suc = false;
-    return na;
-}

utils/str_utils.h

@@ -103,55 +103,4 @@ last_char(const char *str)
     return str[strlen(str) - 1];
 }
 
-/** Parse Y/N to bool */
-bool str_parse_yn(const char *str, bool *suc);
-
-/** Compare string with two options */
-uint8_t str_parse_01(const char *str, const char *a, const char *b, bool *suc);
-
-/** Compare string with three options */
-uint8_t str_parse_012(const char *str, const char *a, const char *b, const char *c, bool *suc);
-
-/** Convert number to one of 4 options */
-const char *str_2(uint32_t n,
-                  uint32_t na, const char *a,
-                  uint32_t nb, const char *b);
-
-/** Convert number to one of 4 options */
-const char *str_3(uint32_t n,
-                  uint32_t na, const char *a,
-                  uint32_t nb, const char *b,
-                  uint32_t nc, const char *c);
-
-/** Convert number to one of 4 options */
-const char *str_4(uint32_t n,
-                     uint32_t na, const char *a,
-                     uint32_t nb, const char *b,
-                     uint32_t nc, const char *c,
-                     uint32_t nd, const char *d);
-
-/** Convert string to one of two numeric options */
-uint32_t str_parse_2(const char *tpl,
-                     const char *a, uint32_t na,
-                     const char *b, uint32_t nb,
-                     bool *suc);
-
-/** Convert string to one of three numeric options */
-uint32_t str_parse_3(const char *tpl,
-                     const char *a, uint32_t na,
-                     const char *b, uint32_t nb,
-                     const char *c, uint32_t nc,
-                     bool *suc);
-
-/** Convert string to one of four numeric options */
-uint32_t str_parse_4(const char *tpl,
-                     const char *a, uint32_t na,
-                     const char *b, uint32_t nb,
-                     const char *c, uint32_t nc,
-                     const char *d, uint32_t nd,
-                     bool *suc);
-
-/** Convert bool to a Y or N constant string */
-#define str_yn(cond) ((cond) ? ("Y") : ("N"))
-
 #endif

vfs/vfs_user.c

@@ -68,7 +68,7 @@ static uint32_t read_file_pinout_txt(uint32_t sector_offset, uint8_t *data, uint
 
 void vfs_user_build_filesystem(void)
 {
-    dbg("Rebuilding VFS...");
+    vfs_printf("Rebuilding VFS...");
 
     // Setup the filesystem based on target parameters
     vfs_init(daplink_drive_name, 0/*unused "disk size"*/);