stm32f103-simon/README.md

STM32F103 CLion / CubeMX boilerplate

Update the init files using STM32CubeMX to fit your project needs.

This is a Cmake / CLion project.

Basics

• The default setup is USART1, 115200 baud, at PA9 (Tx), PA10 (Rx); PC13 as output (built-in LED).
• The program branches from main.c into User/user_main.c where the actual application code starts.
• Initialization of the application code (libs) is done in User/init.c. Exception handlers and such are handled in User/handlers.c.
• Use the included Debounce module for button inputs, Timebase for periodic and future tasks.
• Functions from User/utils/debug.h print messages to USART1, and work like printf(). Regular printf() works as well.
• Use malloc_s() and calloc_s() if you want error message on malloc fail instead of a hard fault / memory corruption.
• Flash using ./flash.sh. Hold the reset button on the board, and release it right after issuing the flash command.