You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
86 lines
1.5 KiB
86 lines
1.5 KiB
## UNITS.INI
|
|
## GEX v0.1.0 on STM32F072-HUB
|
|
## built Mar 28 2018 at 00:42:03
|
|
|
|
[UNITS]
|
|
# Create units by adding their names next to a type (e.g. DO=A,B),
|
|
# remove the same way. Reload to update the unit sections below.
|
|
|
|
# Digital output
|
|
DO=ce
|
|
# Digital input with triggers
|
|
DI=irq
|
|
# Neopixel RGB LED strip
|
|
NPX=
|
|
# I2C master
|
|
I2C=
|
|
# SPI master
|
|
SPI=spi
|
|
# Serial port
|
|
USART=
|
|
# 1-Wire master
|
|
1WIRE=
|
|
# Analog/digital converter
|
|
ADC=
|
|
# Shift register driver (595, 4094)
|
|
SIPO=
|
|
# Frequency and pulse measurement
|
|
FCAP=
|
|
# Capacitive touch sensing
|
|
TOUCH=
|
|
# Simple PWM output
|
|
PWMDIM=
|
|
# Two-channel analog output with waveforms
|
|
DAC=
|
|
|
|
[DO:ce@2]
|
|
# Port name
|
|
port=B
|
|
# Pins (comma separated, supports ranges)
|
|
pins=6, 2
|
|
# Initially high pins
|
|
initial=
|
|
# Open-drain pins
|
|
open-drain=
|
|
|
|
[DI:irq@3]
|
|
# Port name
|
|
port=B
|
|
# Pins (comma separated, supports ranges)
|
|
pins=8-7
|
|
# Pins with pull-up
|
|
pull-up=
|
|
# Pins with pull-down
|
|
pull-down=
|
|
|
|
# Trigger pins activated by rising/falling edge
|
|
trig-rise=
|
|
trig-fall=
|
|
# Trigger pins auto-armed by default
|
|
auto-trigger=
|
|
# Triggers hold-off time (ms)
|
|
hold-off=100
|
|
|
|
[SPI:spi@1]
|
|
# Peripheral number (SPIx)
|
|
device=1
|
|
# Pin mappings (SCK,MISO,MOSI)
|
|
# SPI1: (0) A5,A6,A7 (1) B3,B4,B5
|
|
# SPI2: (0) B13,B14,B15
|
|
remap=1
|
|
|
|
# Prescaller: 2,4,8,...,256
|
|
prescaller=64
|
|
# Clock polarity: 0,1 (clock idle level)
|
|
cpol=0
|
|
# Clock phase: 0,1 (active edge, 0-first, 1-second)
|
|
cpha=1
|
|
# Transmit only, disable MISO
|
|
tx-only=N
|
|
# Bit order (LSB or MSB first)
|
|
first-bit=MSB
|
|
|
|
# SS port name
|
|
port=B
|
|
# SS pins (comma separated, supports ranges)
|
|
pins=1-0
|
|
|