add atuators control & init

main/CMakeLists.txt

@@ -6,6 +6,7 @@ idf_component_register(SRCS
     utils.c
     wifi_conn.c
     mbiface.c
+    actuators.c
     console/console_ioimpl.c
     console/console_server.c
     console/register_cmds.c

main/Kconfig.projbuild

@@ -1,17 +1,33 @@
 menu "IRBLASTER Configuration"
 
     menu "Pin mapping"
-        config PIN_I2C_SDA0
-            int "I2C0 SDA"
+        config PIN_BUZZER
+            int "Buzzer pin"
+            default 16
+
+        config PIN_LED
+            int "LED pin"
+            default 17
+
+        config PIN_BLIND
+            int "Blind open pin"
             default 18
 
-        config PIN_I2C_SCL0
-            int "I2C0 SCL"
+        config PIN_PWM
+            int "Motor PWM pin"
             default 19
 
-        config PIN_IRLED
-            int "IR LED"
-            default 17
+        config PIN_DIR
+            int "Motor direction pin"
+            default 20
+
+        config PIN_1WIRE_1
+            int "1Wire 1 (indoor)"
+            default 21
+
+        config PIN_1WIRE_2
+            int "1Wire 2 (outdoor)"
+            default 22
     endmenu
 
     menu "Console"

main/actuators.c

@@ -0,0 +1,132 @@
+//
+// Created by MightyPork on 2022/08/20.
+//
+
+#include <driver/ledc.h>
+#include "actuators.h"
+#include "settings.h"
+
+struct actuators_status g_Act = {
+        .blind = false,
+        .dir = MOTOR_DIR_IN,
+        .power = 0,
+};
+
+static void buzzer_init() {
+    ledc_timer_config_t ledc_timer = {
+            .duty_resolution = LEDC_TIMER_8_BIT, // resolution of PWM duty
+            .freq_hz = 4400,                      // frequency of PWM signal
+            .speed_mode = LEDC_HIGH_SPEED_MODE,           // timer mode
+            .timer_num = LEDC_TIMER_0,            // timer index
+            .clk_cfg = LEDC_AUTO_CLK,              // Auto select the source clock
+    };
+    // Set configuration of timer0 for high speed channels
+    ledc_timer_config(&ledc_timer);
+
+    ledc_channel_config_t chan = {
+            .channel    = LEDC_CHANNEL_0,
+            .duty       = 127,
+            .gpio_num   = CONFIG_PIN_BUZZER,
+            .speed_mode = LEDC_HIGH_SPEED_MODE,
+            .hpoint     = 0,
+            .timer_sel  = LEDC_TIMER_0
+    };
+    ledc_channel_config(&chan);
+}
+
+void act_buzzer_set(bool on) {
+    g_Act.buzzer = on;
+    if (on) {
+        ledc_set_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 127);
+        ledc_update_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0);
+    } else {
+        ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 0);
+    }
+}
+
+static void motor_init() {
+    ledc_timer_config_t ledc_timer = {
+            .duty_resolution = LEDC_TIMER_10_BIT, // resolution of PWM duty
+            .freq_hz = 1000,                      // frequency of PWM signal
+            .speed_mode = LEDC_HIGH_SPEED_MODE,           // timer mode
+            .timer_num = LEDC_TIMER_1,            // timer index
+            .clk_cfg = LEDC_AUTO_CLK,              // Auto select the source clock
+    };
+    // Set configuration of timer1 for high speed channels
+    ledc_timer_config(&ledc_timer);
+
+    // PWM output
+    ledc_channel_config_t chan = {
+            .channel    = LEDC_CHANNEL_1,
+            .duty       = 512,
+            .gpio_num   = CONFIG_PIN_PWM,
+            .speed_mode = LEDC_HIGH_SPEED_MODE,
+            .hpoint     = 0,
+            .timer_sel  = LEDC_TIMER_0,
+            .flags.output_invert = true,
+    };
+    ledc_channel_config(&chan);
+
+    // Direction output
+    gpio_config_t ioconf = {
+            .mode = GPIO_MODE_OUTPUT,
+            .pin_bit_mask = 1 << CONFIG_PIN_DIR,
+    };
+    gpio_config(&ioconf);
+}
+
+void act_motor_power_set(uint16_t perc) {
+    if (perc > 0) {
+        if (perc < g_Settings.min_power) {
+            perc = g_Settings.min_power;
+        }
+        g_Act.power = perc;
+        uint16_t duty = (uint16_t) (10.23f * (float)perc);
+        if (duty > 1023) {
+            duty = 1023;
+        }
+        ledc_set_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_1, duty);
+        ledc_update_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_1);
+    } else {
+        ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_1, 0);
+    }
+}
+
+void act_motor_direction_set(enum motor_direction dir) {
+    g_Act.dir = dir;
+    gpio_set_level(CONFIG_PIN_DIR, (int) dir); // TODO verify polarity
+}
+
+static void blind_init() {
+    // Blind output
+    gpio_config_t ioconf = {
+            .mode = GPIO_MODE_OUTPUT,
+            .pin_bit_mask = 1 << CONFIG_PIN_BLIND,
+    };
+    gpio_config(&ioconf);
+}
+
+void act_blind_set(bool open) {
+    g_Act.blind = open;
+    gpio_set_level(CONFIG_PIN_BLIND, (int) open); // TODO verify polarity
+}
+
+static void led_init() {
+    gpio_config_t ioconf = {
+            .mode = GPIO_MODE_OUTPUT,
+            .pin_bit_mask = 1 << CONFIG_PIN_LED,
+    };
+    gpio_config(&ioconf);
+}
+
+void act_led_set(bool on) {
+    g_Act.led = on;
+    gpio_set_level(CONFIG_PIN_LED, (int) on); // TODO verify polarity
+}
+
+void act_init() {
+    buzzer_init();
+    motor_init();
+    blind_init();
+    led_init();
+}

main/actuators.h

@@ -0,0 +1,30 @@
+//
+// Created by MightyPork on 2022/08/20.
+//
+
+#ifndef FANCTL_ACTUATORS_H
+#define FANCTL_ACTUATORS_H
+
+enum motor_direction {
+    MOTOR_DIR_IN = 0,
+    MOTOR_DIR_OUT = 1
+};
+
+struct actuators_status {
+    enum motor_direction dir;
+    bool blind;
+    bool led;
+    bool buzzer;
+    uint16_t power;
+};
+
+extern struct actuators_status g_Act;
+
+void act_init();
+void act_buzzer_set(bool on);
+void act_motor_power_set(uint16_t perc);
+void act_motor_direction_set(enum motor_direction dir);
+void act_blind_set(bool open);
+void act_led_set(bool on);
+
+#endif //FANCTL_ACTUATORS_H

main/fanctl_main.c

@@ -20,6 +20,7 @@
 #include "console/register_cmds.h"
 #include "irblast.h"
 #include "mbiface.h"
+#include "actuators.h"
 
 static const char *TAG = "main";
 
@@ -56,6 +57,7 @@ void app_main(void) {
     console_setup_uart_stdio();
     ESP_ERROR_CHECK(console_start_stdio(NULL, NULL));
 
+    act_init();
     mbiface_setup();
 
     telnetsrv_start(CONSOLE_TELNET_PORT);

main/settings.h

@@ -38,7 +38,15 @@ extern nvs_handle g_nvs_storage;
     X(uint32_t      , static_ip_mask ,          , 0x00ffffff , true  , u32  , &) /* 255.255.255.0 */ \
     X(uint32_t      , static_ip_gw   ,          , 0x0100a8c0 , true  , u32  , &) /* 192.168.0.1 */ \
     X(uint32_t      , ap_ip          ,          , 0x0100a8c0 , true  , u32  , &) /* 192.168.0.1 */ \
-    X(uint32_t      , static_dns     ,          , 0x08080808 , true  , u32  , &) /* 8.8.8.8 */
+    X(uint32_t      , static_dns     ,          , 0x08080808 , true  , u32  , &) /* 8.8.8.8 */ \
+    X(uint16_t      , recup_mode     ,          , 0          , true  , u16  , &) /* recuperator control mode - 0=time, 1=min time+temp equilibrium */ \
+    X(uint16_t      , recup_time     ,          , 60         , true  , u16  , &) /* seconds */ \
+    X(uint16_t      , start_stop_time,          , 3          , true  , u16  , &) /* cas rozjezdu nebo zastaveni motoru (s) */ \
+    X(uint16_t      , blind_time     ,          , 30         , true  , u16  , &) /* cas otevreni nebo zavreni rolety (s) */ \
+    X(uint16_t      , initial_mode   ,          , 0          , true  , u16  , &) /* rezim po zapnuti napajeni */ \
+    X(uint16_t      , initial_power  ,          , 100        , true  , u16  , &) /* vychozi vykon */ \
+    X(uint16_t      , min_power      ,          , 1          , true  , u16  , &) /* min power % */ \
+    X(bool          , summer_mode    ,          , 0          , true  , bool  , &) /* rezim po zapnuti napajeni */
 
 enum settings_key_enum {
 #undef X

sdkconfig

@@ -139,9 +139,13 @@ CONFIG_PARTITION_TABLE_MD5=y
 #
 # Pin mapping
 #
-CONFIG_PIN_I2C_SDA0=18
-CONFIG_PIN_I2C_SCL0=19
-CONFIG_PIN_IRLED=17
+CONFIG_PIN_BUZZER=16
+CONFIG_PIN_LED=17
+CONFIG_PIN_BLIND=18
+CONFIG_PIN_PWM=19
+CONFIG_PIN_DIR=20
+CONFIG_PIN_1WIRE_1=21
+CONFIG_PIN_1WIRE_2=22
 # end of Pin mapping
 
 #

sdkconfig.old

@@ -54,6 +54,7 @@ CONFIG_BOOTLOADER_LOG_LEVEL=3
 CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
 # CONFIG_BOOTLOADER_FACTORY_RESET is not set
 # CONFIG_BOOTLOADER_APP_TEST is not set
+CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y
 CONFIG_BOOTLOADER_WDT_ENABLE=y
 # CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
 CONFIG_BOOTLOADER_WDT_TIME_MS=9000
@@ -63,6 +64,7 @@ CONFIG_BOOTLOADER_WDT_TIME_MS=9000
 # CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set
 CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
 # CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set
+CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
 # end of Bootloader config
 
 #
@@ -82,6 +84,7 @@ CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
 # CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
 CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
 # CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
+CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
 CONFIG_ESPTOOLPY_FLASHMODE="dio"
 # CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set
 CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
@@ -93,6 +96,9 @@ CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
 # CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
 CONFIG_ESPTOOLPY_FLASHSIZE="2MB"
 CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
 CONFIG_ESPTOOLPY_BEFORE_RESET=y
@@ -117,6 +123,7 @@ CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
 # Partition Table
 #
 CONFIG_PARTITION_TABLE_SINGLE_APP=y
+# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
 # CONFIG_PARTITION_TABLE_TWO_OTA is not set
 # CONFIG_PARTITION_TABLE_CUSTOM is not set
 CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
@@ -132,9 +139,13 @@ CONFIG_PARTITION_TABLE_MD5=y
 #
 # Pin mapping
 #
-CONFIG_PIN_I2C_SDA0=18
-CONFIG_PIN_I2C_SCL0=19
-CONFIG_PIN_IRLED=17
+CONFIG_PIN_BUZZER=16
+CONFIG_PIN_LED=17
+CONFIG_PIN_BLIND=18
+CONFIG_PIN_PWM=19
+CONFIG_PIN_DIR=20
+CONFIG_PIN_1WIRE_1=21
+CONFIG_PIN_1WIRE_2=22
 # end of Pin mapping
 
 #
@@ -148,13 +159,16 @@ CONFIG_CONSOLE_PW_LEN=32
 #
 # Compiler options
 #
-CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
+# CONFIG_COMPILER_OPTIMIZATION_DEFAULT is not set
 # CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
-# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
+CONFIG_COMPILER_OPTIMIZATION_PERF=y
 # CONFIG_COMPILER_OPTIMIZATION_NONE is not set
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
 # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
 # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
+CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
+# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
+CONFIG_COMPILER_HIDE_PATHS_MACROS=y
 # CONFIG_COMPILER_CXX_EXCEPTIONS is not set
 # CONFIG_COMPILER_CXX_RTTI is not set
 CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
@@ -173,7 +187,7 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
 #
 # Application Level Tracing
 #
-# CONFIG_APPTRACE_DEST_TRAX is not set
+# CONFIG_APPTRACE_DEST_JTAG is not set
 CONFIG_APPTRACE_DEST_NONE=y
 CONFIG_APPTRACE_LOCK_ENABLE=y
 # end of Application Level Tracing
@@ -188,35 +202,6 @@ CONFIG_APPTRACE_LOCK_ENABLE=y
 # Bluetooth
 #
 # CONFIG_BT_ENABLED is not set
-CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=0
-CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0
-CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0
-CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=0
-CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=0
-CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0
-CONFIG_BTDM_CTRL_PINNED_TO_CORE=0
-CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1
-CONFIG_BT_CTRL_MODE_EFF=1
-CONFIG_BT_CTRL_BLE_MAX_ACT=10
-CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=10
-CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0
-CONFIG_BT_CTRL_PINNED_TO_CORE=0
-CONFIG_BT_CTRL_HCI_TL=1
-CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=30
-CONFIG_BT_CTRL_HW_CCA_EFF=0
-CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF=0
-CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
-CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
-CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
-CONFIG_BT_CTRL_BLE_SCAN_DUPL=y
-CONFIG_BT_CTRL_SCAN_DUPL_TYPE=0
-CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE=100
-CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF=0
-CONFIG_BT_CTRL_SLEEP_MODE_EFF=0
-CONFIG_BT_CTRL_SLEEP_CLOCK_EFF=0
-CONFIG_BT_CTRL_HCI_TL_EFF=1
-CONFIG_BT_RESERVE_DRAM=0
-CONFIG_BT_NIMBLE_USE_ESP_TIMER=y
 # end of Bluetooth
 
 #
@@ -239,6 +224,12 @@ CONFIG_COAP_LOG_DEFAULT_LEVEL=0
 CONFIG_ADC_DISABLE_DAC=y
 # end of ADC configuration
 
+#
+# MCPWM configuration
+#
+# CONFIG_MCPWM_ISR_IN_IRAM is not set
+# end of MCPWM configuration
+
 #
 # SPI configuration
 #
@@ -275,6 +266,13 @@ CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
 #
 # CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set
 # end of GPIO Configuration
+
+#
+# GDMA Configuration
+#
+# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set
+# CONFIG_GDMA_ISR_IRAM_SAFE is not set
+# end of GDMA Configuration
 # end of Driver configurations
 
 #
@@ -293,6 +291,7 @@ CONFIG_EFUSE_MAX_BLK_LEN=192
 #
 CONFIG_ESP_TLS_USING_MBEDTLS=y
 # CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
+# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set
 # CONFIG_ESP_TLS_SERVER is not set
 # CONFIG_ESP_TLS_PSK_VERIFICATION is not set
 # CONFIG_ESP_TLS_INSECURE is not set
@@ -314,9 +313,6 @@ CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160
 # CONFIG_ESP32_SPIRAM_SUPPORT is not set
 # CONFIG_ESP32_TRAX is not set
 CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0
-# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set
-CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
-CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
 # CONFIG_ESP32_ULP_COPROC_ENABLED is not set
 CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0
 CONFIG_ESP32_DEBUG_OCDAWARE=y
@@ -330,7 +326,6 @@ CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
 # CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set
 # CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set
 CONFIG_ESP32_BROWNOUT_DET_LVL=0
-CONFIG_ESP32_REDUCE_PHY_TX_POWER=y
 CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
 # CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set
 # CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set
@@ -365,32 +360,6 @@ CONFIG_ADC_CAL_LUT_ENABLE=y
 # Common ESP-related
 #
 CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
-CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
-CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
-CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
-CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
-CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
-CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
-CONFIG_ESP_CONSOLE_UART_DEFAULT=y
-# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
-# CONFIG_ESP_CONSOLE_NONE is not set
-CONFIG_ESP_CONSOLE_UART=y
-CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
-CONFIG_ESP_CONSOLE_UART_NUM=0
-CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
-CONFIG_ESP_INT_WDT=y
-CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
-CONFIG_ESP_INT_WDT_CHECK_CPU1=y
-CONFIG_ESP_TASK_WDT=y
-# CONFIG_ESP_TASK_WDT_PANIC is not set
-CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
-CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
-# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
-CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
 # end of Common ESP-related
 
 #
@@ -399,7 +368,6 @@ CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
 CONFIG_ETH_ENABLED=y
 CONFIG_ETH_USE_ESP32_EMAC=y
 CONFIG_ETH_PHY_INTERFACE_RMII=y
-# CONFIG_ETH_PHY_INTERFACE_MII is not set
 CONFIG_ETH_RMII_CLK_INPUT=y
 # CONFIG_ETH_RMII_CLK_OUTPUT is not set
 CONFIG_ETH_RMII_CLK_IN_GPIO=0
@@ -409,6 +377,7 @@ CONFIG_ETH_DMA_TX_BUFFER_NUM=10
 CONFIG_ETH_USE_SPI_ETHERNET=y
 # CONFIG_ETH_SPI_ETHERNET_DM9051 is not set
 # CONFIG_ETH_SPI_ETHERNET_W5500 is not set
+# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set
 # CONFIG_ETH_USE_OPENETH is not set
 # end of Ethernet
 
@@ -430,6 +399,7 @@ CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
 #
 CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
 # CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
+CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y
 # end of ESP HTTP client
 
 #
@@ -455,6 +425,56 @@ CONFIG_HTTPD_PURGE_BUF_LEN=32
 # CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
 # end of ESP HTTPS server
 
+#
+# Hardware Settings
+#
+
+#
+# MAC Config
+#
+CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
+# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set
+CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
+CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
+# end of MAC Config
+
+#
+# Sleep Config
+#
+CONFIG_ESP_SLEEP_POWER_DOWN_FLASH=y
+CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y
+# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set
+# CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND is not set
+# end of Sleep Config
+
+#
+# RTC Clock Config
+#
+# end of RTC Clock Config
+# end of Hardware Settings
+
+#
+# IPC (Inter-Processor Call)
+#
+CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
+CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
+CONFIG_ESP_IPC_ISR_ENABLE=y
+# end of IPC (Inter-Processor Call)
+
+#
+# LCD and Touch Panel
+#
+
+#
+# LCD Peripheral Configuration
+#
+CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
+# end of LCD Peripheral Configuration
+# end of LCD and Touch Panel
+
 #
 # ESP NETIF Adapter
 #
@@ -464,6 +484,16 @@ CONFIG_ESP_NETIF_TCPIP_LWIP=y
 CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
 # end of ESP NETIF Adapter
 
+#
+# PHY
+#
+CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
+# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set
+CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20
+CONFIG_ESP_PHY_MAX_TX_POWER=20
+CONFIG_ESP_PHY_REDUCE_TX_POWER=y
+# end of PHY
+
 #
 # Power Management
 #
@@ -477,12 +507,40 @@ CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
 CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
 # CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
 # CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
-CONFIG_ESP_SYSTEM_PD_FLASH=y
+# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set
 
 #
 # Memory protection
 #
 # end of Memory protection
+
+CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
+CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
+CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
+# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
+# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
+CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
+CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
+CONFIG_ESP_CONSOLE_UART_DEFAULT=y
+# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
+# CONFIG_ESP_CONSOLE_NONE is not set
+CONFIG_ESP_CONSOLE_UART=y
+CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
+CONFIG_ESP_CONSOLE_UART_NUM=0
+CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
+CONFIG_ESP_INT_WDT=y
+CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
+CONFIG_ESP_INT_WDT_CHECK_CPU1=y
+CONFIG_ESP_TASK_WDT=y
+# CONFIG_ESP_TASK_WDT_PANIC is not set
+CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
+CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
+CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
+# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
+# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set
+# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set
+CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y
 # end of ESP System Settings
 
 #
@@ -492,6 +550,8 @@ CONFIG_ESP_SYSTEM_PD_FLASH=y
 CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y
 CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y
 CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
+CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1
+# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set
 # CONFIG_ESP_TIMER_IMPL_FRC2 is not set
 CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
 # end of High resolution timer (esp_timer)
@@ -499,6 +559,7 @@ CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
 #
 # Wi-Fi
 #
+CONFIG_ESP32_WIFI_ENABLED=y
 CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
 CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
 # CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
@@ -515,28 +576,15 @@ CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
 # CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
 CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
 CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
-# CONFIG_WIFI_LOG_DEFAULT_LEVEL_NONE is not set
-# CONFIG_WIFI_LOG_DEFAULT_LEVEL_ERROR is not set
-# CONFIG_WIFI_LOG_DEFAULT_LEVEL_WARN is not set
-CONFIG_WIFI_LOG_DEFAULT_LEVEL_INFO=y
-# CONFIG_WIFI_LOG_DEFAULT_LEVEL_DEBUG is not set
-# CONFIG_WIFI_LOG_DEFAULT_LEVEL_VERBOSE is not set
 CONFIG_ESP32_WIFI_IRAM_OPT=y
 CONFIG_ESP32_WIFI_RX_IRAM_OPT=y
 CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
 # CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
 # CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set
+# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set
+CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y
 # end of Wi-Fi
 
-#
-# PHY
-#
-CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
-# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
-CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
-CONFIG_ESP32_PHY_MAX_TX_POWER=20
-# end of PHY
-
 #
 # Core dump
 #
@@ -597,6 +645,10 @@ CONFIG_FMB_SERIAL_BUF_SIZE=256
 CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
 CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
 CONFIG_FMB_PORT_TASK_PRIO=10
+# CONFIG_FMB_PORT_TASK_AFFINITY_NO_AFFINITY is not set
+CONFIG_FMB_PORT_TASK_AFFINITY_CPU0=y
+# CONFIG_FMB_PORT_TASK_AFFINITY_CPU1 is not set
+CONFIG_FMB_PORT_TASK_AFFINITY=0x0
 CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y
 CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233
 CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
@@ -606,6 +658,8 @@ CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
 CONFIG_FMB_TIMER_PORT_ENABLED=y
 CONFIG_FMB_TIMER_GROUP=0
 CONFIG_FMB_TIMER_INDEX=0
+CONFIG_FMB_MASTER_TIMER_GROUP=0
+CONFIG_FMB_MASTER_TIMER_INDEX=0
 # CONFIG_FMB_TIMER_ISR_IN_IRAM is not set
 # end of Modbus configuration
 
@@ -614,8 +668,10 @@ CONFIG_FMB_TIMER_INDEX=0
 #
 # CONFIG_FREERTOS_UNICORE is not set
 CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
+CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y
 CONFIG_FREERTOS_CORETIMER_0=y
 # CONFIG_FREERTOS_CORETIMER_1 is not set
+CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y
 CONFIG_FREERTOS_HZ=1000
 CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
 # CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
@@ -641,14 +697,25 @@ CONFIG_FREERTOS_USE_TRACE_FACILITY=y
 CONFIG_FREERTOS_USE_STATS_FORMATTING_FUNCTIONS=y
 CONFIG_FREERTOS_VTASKLIST_INCLUDE_COREID=y
 # CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
-CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
 CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
 # CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
 # CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
 CONFIG_FREERTOS_DEBUG_OCDAWARE=y
 # CONFIG_FREERTOS_FPU_IN_ISR is not set
+CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y
+# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set
 # end of FreeRTOS
 
+#
+# Hardware Abstraction Layer (HAL) and Low Level (LL)
+#
+CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
+# CONFIG_HAL_ASSERTION_DISABLE is not set
+# CONFIG_HAL_ASSERTION_SILIENT is not set
+# CONFIG_HAL_ASSERTION_ENABLE is not set
+CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
+# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
+
 #
 # Heap memory debugging
 #
@@ -683,6 +750,10 @@ CONFIG_LOG_DEFAULT_LEVEL_INFO=y
 # CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
 # CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
 CONFIG_LOG_DEFAULT_LEVEL=3
+CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
+# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
+# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
+CONFIG_LOG_MAXIMUM_LEVEL=3
 CONFIG_LOG_COLORS=y
 CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
 # CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
@@ -692,6 +763,8 @@ CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
 # LWIP
 #
 CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
+# CONFIG_LWIP_NETIF_API is not set
+# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set
 CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
 # CONFIG_LWIP_L2_TO_L3_COPY is not set
 # CONFIG_LWIP_IRAM_OPTIMIZATION is not set
@@ -715,7 +788,9 @@ CONFIG_LWIP_GARP_TMR_INTERVAL=60
 CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
 CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
 # CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
+CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
 # CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
+CONFIG_LWIP_DHCP_OPTIONS_LEN=68
 
 #
 # DHCP server
@@ -728,6 +803,9 @@ CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
 # CONFIG_LWIP_AUTOIP is not set
 CONFIG_LWIP_IPV6=y
 # CONFIG_LWIP_IPV6_AUTOCONFIG is not set
+CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
+# CONFIG_LWIP_IPV6_FORWARD is not set
+# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set
 CONFIG_LWIP_NETIF_LOOPBACK=y
 CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
 
@@ -796,7 +874,8 @@ CONFIG_LWIP_MAX_RAW_PCBS=16
 #
 # SNTP
 #
-CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
+CONFIG_LWIP_SNTP_MAX_SERVERS=1
+# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set
 CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
 # end of SNTP
 
@@ -811,6 +890,9 @@ CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
 CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y
 # CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set
 # CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
+CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y
+# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set
+# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set
 CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
 # CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
 # CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
@@ -831,6 +913,15 @@ CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
 # CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
 # CONFIG_MBEDTLS_DEBUG is not set
 
+#
+# mbedTLS v2.28.x related
+#
+# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set
+# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set
+# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set
+CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y
+# end of mbedTLS v2.28.x related
+
 #
 # Certificate Bundle
 #
@@ -839,6 +930,7 @@ CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
 # CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
 # CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
 # CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200
 # end of Certificate Bundle
 
 # CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
@@ -879,6 +971,7 @@ CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
 CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
 CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
 CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
+# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set
 # CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
 CONFIG_MBEDTLS_SSL_ALPN=y
 CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
@@ -951,6 +1044,8 @@ CONFIG_MDNS_TASK_AFFINITY=0x0
 CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
 # CONFIG_MDNS_STRICT_MODE is not set
 CONFIG_MDNS_TIMER_PERIOD_MS=100
+# CONFIG_MDNS_NETWORKING_SOCKET is not set
+CONFIG_MDNS_MULTIPLE_INSTANCE=y
 # end of mDNS
 
 #
@@ -983,6 +1078,7 @@ CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
 #
 # NVS
 #
+# CONFIG_NVS_ASSERT_ERROR_CHECK is not set
 # end of NVS
 
 #
@@ -994,6 +1090,12 @@ CONFIG_OPENSSL_ERROR_STACK=y
 CONFIG_OPENSSL_ASSERT_EXIT=y
 # end of OpenSSL
 
+#
+# OpenThread
+#
+# CONFIG_OPENTHREAD_ENABLED is not set
+# end of OpenThread
+
 #
 # PThreads
 #
@@ -1025,6 +1127,7 @@ CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1
 CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192
 # CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set
 # CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set
+# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set
 
 #
 # Auto-detect flash chips
@@ -1033,6 +1136,8 @@ CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
 CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
 CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
 CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
+# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set
+# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set
 # end of Auto-detect flash chips
 
 CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
@@ -1086,16 +1191,12 @@ CONFIG_WS_BUFFER_SIZE=1024
 # end of Websocket
 # end of TCP Transport
 
-#
-# TinyUSB
-#
-# end of TinyUSB
-
 #
 # Unity unit testing library
 #
 CONFIG_UNITY_ENABLE_FLOAT=y
 CONFIG_UNITY_ENABLE_DOUBLE=y
+# CONFIG_UNITY_ENABLE_64BIT is not set
 # CONFIG_UNITY_ENABLE_COLOR is not set
 CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
 # CONFIG_UNITY_ENABLE_FIXTURE is not set
@@ -1115,7 +1216,6 @@ CONFIG_VFS_SUPPORT_TERMIOS=y
 # Host File System I/O (Semihosting)
 #
 CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
 # end of Host File System I/O (Semihosting)
 # end of Virtual file system
 
@@ -1132,6 +1232,7 @@ CONFIG_WL_SECTOR_SIZE=4096
 #
 CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
 CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
+CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION=y
 # end of Wi-Fi Provisioning Manager
 
 #
@@ -1139,10 +1240,13 @@ CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
 #
 CONFIG_WPA_MBEDTLS_CRYPTO=y
 # CONFIG_WPA_WAPI_PSK is not set
+# CONFIG_WPA_SUITE_B_192 is not set
 # CONFIG_WPA_DEBUG_PRINT is not set
 # CONFIG_WPA_TESTING_OPTIONS is not set
 # CONFIG_WPA_WPS_STRICT is not set
 # CONFIG_WPA_11KV_SUPPORT is not set
+# CONFIG_WPA_MBO_SUPPORT is not set
+# CONFIG_WPA_DPP_SUPPORT is not set
 # end of Supplicant
 
 #