electro
/
esp-recuperator
forked from electro/esp-irblaster
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

add atuators control & init

Browse Source
master
Ondřej Hruška 3 years ago
parent 3efa1b6665
commit 5937417568
8 changed files with 398 additions and 101 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 1
      main/CMakeLists.txt
  2. 30
      main/Kconfig.projbuild
  3. 132
      main/actuators.c
  4. 30
      main/actuators.h
  5. 2
      main/fanctl_main.c
  6. 10
      main/settings.h
  7. 10
      sdkconfig
  8. 284
      sdkconfig.old

1
main/CMakeLists.txt
Unescape View File

@ -6,6 +6,7 @@ idf_component_register(SRCS
utils.c
wifi_conn.c
mbiface.c
actuators.c
console/console_ioimpl.c
console/console_server.c
console/register_cmds.c

30
main/Kconfig.projbuild
Unescape View File

@ -1,17 +1,33 @@
menu "IRBLASTER Configuration"
menu "Pin mapping"
config PIN_I2C_SDA0
int "I2C0 SDA"
config PIN_BUZZER
int "Buzzer pin"
default 16
config PIN_LED
int "LED pin"
default 17
config PIN_BLIND
int "Blind open pin"
default 18
config PIN_I2C_SCL0
int "I2C0 SCL"
config PIN_PWM
int "Motor PWM pin"
default 19
config PIN_IRLED
int "IR LED"
default 17
config PIN_DIR
int "Motor direction pin"
default 20
config PIN_1WIRE_1
int "1Wire 1 (indoor)"
default 21
config PIN_1WIRE_2
int "1Wire 2 (outdoor)"
default 22
endmenu
menu "Console"

132
main/actuators.c
Unescape View File

@ -0,0 +1,132 @@
//
// Created by MightyPork on 2022/08/20.
//
#include <driver/ledc.h>
#include "actuators.h"
#include "settings.h"
struct actuators_status g_Act = {
.blind = false,
.dir = MOTOR_DIR_IN,
.power = 0,
};
static void buzzer_init() {
ledc_timer_config_t ledc_timer = {
.duty_resolution = LEDC_TIMER_8_BIT, // resolution of PWM duty
.freq_hz = 4400, // frequency of PWM signal
.speed_mode = LEDC_HIGH_SPEED_MODE, // timer mode
.timer_num = LEDC_TIMER_0, // timer index
.clk_cfg = LEDC_AUTO_CLK, // Auto select the source clock
};
// Set configuration of timer0 for high speed channels
ledc_timer_config(&ledc_timer);
ledc_channel_config_t chan = {
.channel = LEDC_CHANNEL_0,
.duty = 127,
.gpio_num = CONFIG_PIN_BUZZER,
.speed_mode = LEDC_HIGH_SPEED_MODE,
.hpoint = 0,
.timer_sel = LEDC_TIMER_0
};
ledc_channel_config(&chan);
}
void act_buzzer_set(bool on) {
g_Act.buzzer = on;
if (on) {
ledc_set_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 127);
ledc_update_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0);
} else {
ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 0);
}
}
static void motor_init() {
ledc_timer_config_t ledc_timer = {
.duty_resolution = LEDC_TIMER_10_BIT, // resolution of PWM duty
.freq_hz = 1000, // frequency of PWM signal
.speed_mode = LEDC_HIGH_SPEED_MODE, // timer mode
.timer_num = LEDC_TIMER_1, // timer index
.clk_cfg = LEDC_AUTO_CLK, // Auto select the source clock
};
// Set configuration of timer1 for high speed channels
ledc_timer_config(&ledc_timer);
// PWM output
ledc_channel_config_t chan = {
.channel = LEDC_CHANNEL_1,
.duty = 512,
.gpio_num = CONFIG_PIN_PWM,
.speed_mode = LEDC_HIGH_SPEED_MODE,
.hpoint = 0,
.timer_sel = LEDC_TIMER_0,
.flags.output_invert = true,
};
ledc_channel_config(&chan);
// Direction output
gpio_config_t ioconf = {
.mode = GPIO_MODE_OUTPUT,
.pin_bit_mask = 1 << CONFIG_PIN_DIR,
};
gpio_config(&ioconf);
}
void act_motor_power_set(uint16_t perc) {
if (perc > 0) {
if (perc < g_Settings.min_power) {
perc = g_Settings.min_power;
}
g_Act.power = perc;
uint16_t duty = (uint16_t) (10.23f * (float)perc);
if (duty > 1023) {
duty = 1023;
}
ledc_set_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_1, duty);
ledc_update_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_1);
} else {
ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_1, 0);
}
}
void act_motor_direction_set(enum motor_direction dir) {
g_Act.dir = dir;
gpio_set_level(CONFIG_PIN_DIR, (int) dir); // TODO verify polarity
}
static void blind_init() {
// Blind output
gpio_config_t ioconf = {
.mode = GPIO_MODE_OUTPUT,
.pin_bit_mask = 1 << CONFIG_PIN_BLIND,
};
gpio_config(&ioconf);
}
void act_blind_set(bool open) {
g_Act.blind = open;
gpio_set_level(CONFIG_PIN_BLIND, (int) open); // TODO verify polarity
}
static void led_init() {
gpio_config_t ioconf = {
.mode = GPIO_MODE_OUTPUT,
.pin_bit_mask = 1 << CONFIG_PIN_LED,
};
gpio_config(&ioconf);
}
void act_led_set(bool on) {
g_Act.led = on;
gpio_set_level(CONFIG_PIN_LED, (int) on); // TODO verify polarity
}
void act_init() {
buzzer_init();
motor_init();
blind_init();
led_init();
}

30
main/actuators.h
Unescape View File

@ -0,0 +1,30 @@
//
// Created by MightyPork on 2022/08/20.
//
#ifndef FANCTL_ACTUATORS_H
#define FANCTL_ACTUATORS_H
enum motor_direction {
MOTOR_DIR_IN = 0,
MOTOR_DIR_OUT = 1
};
struct actuators_status {
enum motor_direction dir;
bool blind;
bool led;
bool buzzer;
uint16_t power;
};
extern struct actuators_status g_Act;
void act_init();
void act_buzzer_set(bool on);
void act_motor_power_set(uint16_t perc);
void act_motor_direction_set(enum motor_direction dir);
void act_blind_set(bool open);
void act_led_set(bool on);
#endif //FANCTL_ACTUATORS_H

2
main/fanctl_main.c
Unescape View File

@ -20,6 +20,7 @@
#include "console/register_cmds.h"
#include "irblast.h"
#include "mbiface.h"
#include "actuators.h"
static const char *TAG = "main";
@ -56,6 +57,7 @@ void app_main(void) {
console_setup_uart_stdio();
ESP_ERROR_CHECK(console_start_stdio(NULL, NULL));
act_init();
mbiface_setup();
telnetsrv_start(CONSOLE_TELNET_PORT);

10
main/settings.h
Unescape View File

@ -38,7 +38,15 @@ extern nvs_handle g_nvs_storage;
X(uint32_t , static_ip_mask , , 0x00ffffff , true , u32 , &) /* 255.255.255.0 */ \
X(uint32_t , static_ip_gw , , 0x0100a8c0 , true , u32 , &) /* 192.168.0.1 */ \
X(uint32_t , ap_ip , , 0x0100a8c0 , true , u32 , &) /* 192.168.0.1 */ \
X(uint32_t , static_dns , , 0x08080808 , true , u32 , &) /* 8.8.8.8 */
X(uint32_t , static_dns , , 0x08080808 , true , u32 , &) /* 8.8.8.8 */ \
X(uint16_t , recup_mode , , 0 , true , u16 , &) /* recuperator control mode - 0=time, 1=min time+temp equilibrium */ \
X(uint16_t , recup_time , , 60 , true , u16 , &) /* seconds */ \
X(uint16_t , start_stop_time, , 3 , true , u16 , &) /* cas rozjezdu nebo zastaveni motoru (s) */ \
X(uint16_t , blind_time , , 30 , true , u16 , &) /* cas otevreni nebo zavreni rolety (s) */ \
X(uint16_t , initial_mode , , 0 , true , u16 , &) /* rezim po zapnuti napajeni */ \
X(uint16_t , initial_power , , 100 , true , u16 , &) /* vychozi vykon */ \
X(uint16_t , min_power , , 1 , true , u16 , &) /* min power % */ \
X(bool , summer_mode , , 0 , true , bool , &) /* rezim po zapnuti napajeni */
enum settings_key_enum {
#undef X

10
sdkconfig
Unescape View File

@ -139,9 +139,13 @@ CONFIG_PARTITION_TABLE_MD5=y
#
# Pin mapping
#
CONFIG_PIN_I2C_SDA0=18
CONFIG_PIN_I2C_SCL0=19
CONFIG_PIN_IRLED=17
CONFIG_PIN_BUZZER=16
CONFIG_PIN_LED=17
CONFIG_PIN_BLIND=18
CONFIG_PIN_PWM=19
CONFIG_PIN_DIR=20
CONFIG_PIN_1WIRE_1=21
CONFIG_PIN_1WIRE_2=22
# end of Pin mapping
#

284
sdkconfig.old
Unescape View File

@ -54,6 +54,7 @@ CONFIG_BOOTLOADER_LOG_LEVEL=3
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
# CONFIG_BOOTLOADER_FACTORY_RESET is not set
# CONFIG_BOOTLOADER_APP_TEST is not set
CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y
CONFIG_BOOTLOADER_WDT_ENABLE=y
# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
CONFIG_BOOTLOADER_WDT_TIME_MS=9000
@ -63,6 +64,7 @@ CONFIG_BOOTLOADER_WDT_TIME_MS=9000
# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set
CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set
CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
# end of Bootloader config
#
@ -82,6 +84,7 @@ CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
CONFIG_ESPTOOLPY_FLASHMODE="dio"
# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
@ -93,6 +96,9 @@ CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE="2MB"
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
CONFIG_ESPTOOLPY_BEFORE_RESET=y
@ -117,6 +123,7 @@ CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
# Partition Table
#
CONFIG_PARTITION_TABLE_SINGLE_APP=y
# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
# CONFIG_PARTITION_TABLE_TWO_OTA is not set
# CONFIG_PARTITION_TABLE_CUSTOM is not set
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
@ -132,9 +139,13 @@ CONFIG_PARTITION_TABLE_MD5=y
#
# Pin mapping
#
CONFIG_PIN_I2C_SDA0=18
CONFIG_PIN_I2C_SCL0=19
CONFIG_PIN_IRLED=17
CONFIG_PIN_BUZZER=16
CONFIG_PIN_LED=17
CONFIG_PIN_BLIND=18
CONFIG_PIN_PWM=19
CONFIG_PIN_DIR=20
CONFIG_PIN_1WIRE_1=21
CONFIG_PIN_1WIRE_2=22
# end of Pin mapping
#
@ -148,13 +159,16 @@ CONFIG_CONSOLE_PW_LEN=32
#
# Compiler options
#
CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
# CONFIG_COMPILER_OPTIMIZATION_DEFAULT is not set
# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
CONFIG_COMPILER_OPTIMIZATION_PERF=y
# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
CONFIG_COMPILER_HIDE_PATHS_MACROS=y
# CONFIG_COMPILER_CXX_EXCEPTIONS is not set
# CONFIG_COMPILER_CXX_RTTI is not set
CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
@ -173,7 +187,7 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
#
# Application Level Tracing
#
# CONFIG_APPTRACE_DEST_TRAX is not set
# CONFIG_APPTRACE_DEST_JTAG is not set
CONFIG_APPTRACE_DEST_NONE=y
CONFIG_APPTRACE_LOCK_ENABLE=y
# end of Application Level Tracing
@ -188,35 +202,6 @@ CONFIG_APPTRACE_LOCK_ENABLE=y
# Bluetooth
#
# CONFIG_BT_ENABLED is not set
CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=0
CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0
CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0
CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=0
CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=0
CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0
CONFIG_BTDM_CTRL_PINNED_TO_CORE=0
CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1
CONFIG_BT_CTRL_MODE_EFF=1
CONFIG_BT_CTRL_BLE_MAX_ACT=10
CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=10
CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0
CONFIG_BT_CTRL_PINNED_TO_CORE=0
CONFIG_BT_CTRL_HCI_TL=1
CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=30
CONFIG_BT_CTRL_HW_CCA_EFF=0
CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF=0
CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
CONFIG_BT_CTRL_BLE_SCAN_DUPL=y
CONFIG_BT_CTRL_SCAN_DUPL_TYPE=0
CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE=100
CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF=0
CONFIG_BT_CTRL_SLEEP_MODE_EFF=0
CONFIG_BT_CTRL_SLEEP_CLOCK_EFF=0
CONFIG_BT_CTRL_HCI_TL_EFF=1
CONFIG_BT_RESERVE_DRAM=0
CONFIG_BT_NIMBLE_USE_ESP_TIMER=y
# end of Bluetooth
#
@ -239,6 +224,12 @@ CONFIG_COAP_LOG_DEFAULT_LEVEL=0
CONFIG_ADC_DISABLE_DAC=y
# end of ADC configuration
#
# MCPWM configuration
#
# CONFIG_MCPWM_ISR_IN_IRAM is not set
# end of MCPWM configuration
#
# SPI configuration
#
@ -275,6 +266,13 @@ CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
#
# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set
# end of GPIO Configuration
#
# GDMA Configuration
#
# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set
# CONFIG_GDMA_ISR_IRAM_SAFE is not set
# end of GDMA Configuration
# end of Driver configurations
#
@ -293,6 +291,7 @@ CONFIG_EFUSE_MAX_BLK_LEN=192
#
CONFIG_ESP_TLS_USING_MBEDTLS=y
# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set
# CONFIG_ESP_TLS_SERVER is not set
# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
# CONFIG_ESP_TLS_INSECURE is not set
@ -314,9 +313,6 @@ CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160
# CONFIG_ESP32_SPIRAM_SUPPORT is not set
# CONFIG_ESP32_TRAX is not set
CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0
# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
# CONFIG_ESP32_ULP_COPROC_ENABLED is not set
CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0
CONFIG_ESP32_DEBUG_OCDAWARE=y
@ -330,7 +326,6 @@ CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set
CONFIG_ESP32_BROWNOUT_DET_LVL=0
CONFIG_ESP32_REDUCE_PHY_TX_POWER=y
CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set
@ -365,32 +360,6 @@ CONFIG_ADC_CAL_LUT_ENABLE=y
# Common ESP-related
#
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
CONFIG_ESP_CONSOLE_UART_DEFAULT=y
# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
# CONFIG_ESP_CONSOLE_NONE is not set
CONFIG_ESP_CONSOLE_UART=y
CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
CONFIG_ESP_CONSOLE_UART_NUM=0
CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
CONFIG_ESP_INT_WDT=y
CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
CONFIG_ESP_INT_WDT_CHECK_CPU1=y
CONFIG_ESP_TASK_WDT=y
# CONFIG_ESP_TASK_WDT_PANIC is not set
CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
# end of Common ESP-related
#
@ -399,7 +368,6 @@ CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
CONFIG_ETH_ENABLED=y
CONFIG_ETH_USE_ESP32_EMAC=y
CONFIG_ETH_PHY_INTERFACE_RMII=y
# CONFIG_ETH_PHY_INTERFACE_MII is not set
CONFIG_ETH_RMII_CLK_INPUT=y
# CONFIG_ETH_RMII_CLK_OUTPUT is not set
CONFIG_ETH_RMII_CLK_IN_GPIO=0
@ -409,6 +377,7 @@ CONFIG_ETH_DMA_TX_BUFFER_NUM=10
CONFIG_ETH_USE_SPI_ETHERNET=y
# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set
# CONFIG_ETH_SPI_ETHERNET_W5500 is not set
# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set
# CONFIG_ETH_USE_OPENETH is not set
# end of Ethernet
@ -430,6 +399,7 @@ CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
#
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y
# end of ESP HTTP client
#
@ -455,6 +425,56 @@ CONFIG_HTTPD_PURGE_BUF_LEN=32
# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
# end of ESP HTTPS server
#
# Hardware Settings
#
#
# MAC Config
#
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
# end of MAC Config
#
# Sleep Config
#
CONFIG_ESP_SLEEP_POWER_DOWN_FLASH=y
CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y
# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set
# CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND is not set
# end of Sleep Config
#
# RTC Clock Config
#
# end of RTC Clock Config
# end of Hardware Settings
#
# IPC (Inter-Processor Call)
#
CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
CONFIG_ESP_IPC_ISR_ENABLE=y
# end of IPC (Inter-Processor Call)
#
# LCD and Touch Panel
#
#
# LCD Peripheral Configuration
#
CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
# end of LCD Peripheral Configuration
# end of LCD and Touch Panel
#
# ESP NETIF Adapter
#
@ -464,6 +484,16 @@ CONFIG_ESP_NETIF_TCPIP_LWIP=y
CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
# end of ESP NETIF Adapter
#
# PHY
#
CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP_PHY_MAX_TX_POWER=20
CONFIG_ESP_PHY_REDUCE_TX_POWER=y
# end of PHY
#
# Power Management
#
@ -477,12 +507,40 @@ CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
CONFIG_ESP_SYSTEM_PD_FLASH=y
# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set
#
# Memory protection
#
# end of Memory protection
CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
CONFIG_ESP_CONSOLE_UART_DEFAULT=y
# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
# CONFIG_ESP_CONSOLE_NONE is not set
CONFIG_ESP_CONSOLE_UART=y
CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
CONFIG_ESP_CONSOLE_UART_NUM=0
CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
CONFIG_ESP_INT_WDT=y
CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
CONFIG_ESP_INT_WDT_CHECK_CPU1=y
CONFIG_ESP_TASK_WDT=y
# CONFIG_ESP_TASK_WDT_PANIC is not set
CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set
# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set
CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y
# end of ESP System Settings
#
@ -492,6 +550,8 @@ CONFIG_ESP_SYSTEM_PD_FLASH=y
CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y
CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y
CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1
# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set
# CONFIG_ESP_TIMER_IMPL_FRC2 is not set
CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
# end of High resolution timer (esp_timer)
@ -499,6 +559,7 @@ CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
#
# Wi-Fi
#
CONFIG_ESP32_WIFI_ENABLED=y
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
@ -515,28 +576,15 @@ CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
# CONFIG_WIFI_LOG_DEFAULT_LEVEL_NONE is not set
# CONFIG_WIFI_LOG_DEFAULT_LEVEL_ERROR is not set
# CONFIG_WIFI_LOG_DEFAULT_LEVEL_WARN is not set
CONFIG_WIFI_LOG_DEFAULT_LEVEL_INFO=y
# CONFIG_WIFI_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_WIFI_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_ESP32_WIFI_IRAM_OPT=y
CONFIG_ESP32_WIFI_RX_IRAM_OPT=y
CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set
# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set
CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y
# end of Wi-Fi
#
# PHY
#
CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20
# end of PHY
#
# Core dump
#
@ -597,6 +645,10 @@ CONFIG_FMB_SERIAL_BUF_SIZE=256
CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
CONFIG_FMB_PORT_TASK_PRIO=10
# CONFIG_FMB_PORT_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_FMB_PORT_TASK_AFFINITY_CPU0=y
# CONFIG_FMB_PORT_TASK_AFFINITY_CPU1 is not set
CONFIG_FMB_PORT_TASK_AFFINITY=0x0
CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y
CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233
CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
@ -606,6 +658,8 @@ CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
CONFIG_FMB_TIMER_PORT_ENABLED=y
CONFIG_FMB_TIMER_GROUP=0
CONFIG_FMB_TIMER_INDEX=0
CONFIG_FMB_MASTER_TIMER_GROUP=0
CONFIG_FMB_MASTER_TIMER_INDEX=0
# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set
# end of Modbus configuration
@ -614,8 +668,10 @@ CONFIG_FMB_TIMER_INDEX=0
#
# CONFIG_FREERTOS_UNICORE is not set
CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y
CONFIG_FREERTOS_CORETIMER_0=y
# CONFIG_FREERTOS_CORETIMER_1 is not set
CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y
CONFIG_FREERTOS_HZ=1000
CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
@ -641,14 +697,25 @@ CONFIG_FREERTOS_USE_TRACE_FACILITY=y
CONFIG_FREERTOS_USE_STATS_FORMATTING_FUNCTIONS=y
CONFIG_FREERTOS_VTASKLIST_INCLUDE_COREID=y
# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
CONFIG_FREERTOS_DEBUG_OCDAWARE=y
# CONFIG_FREERTOS_FPU_IN_ISR is not set
CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y
# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set
# end of FreeRTOS
#
# Hardware Abstraction Layer (HAL) and Low Level (LL)
#
CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
# CONFIG_HAL_ASSERTION_DISABLE is not set
# CONFIG_HAL_ASSERTION_SILIENT is not set
# CONFIG_HAL_ASSERTION_ENABLE is not set
CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
#
# Heap memory debugging
#
@ -683,6 +750,10 @@ CONFIG_LOG_DEFAULT_LEVEL_INFO=y
# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_LOG_DEFAULT_LEVEL=3
CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
CONFIG_LOG_MAXIMUM_LEVEL=3
CONFIG_LOG_COLORS=y
CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
@ -692,6 +763,8 @@ CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
# LWIP
#
CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
# CONFIG_LWIP_NETIF_API is not set
# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set
CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
# CONFIG_LWIP_L2_TO_L3_COPY is not set
# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
@ -715,7 +788,9 @@ CONFIG_LWIP_GARP_TMR_INTERVAL=60
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
CONFIG_LWIP_DHCP_OPTIONS_LEN=68
#
# DHCP server
@ -728,6 +803,9 @@ CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
# CONFIG_LWIP_AUTOIP is not set
CONFIG_LWIP_IPV6=y
# CONFIG_LWIP_IPV6_AUTOCONFIG is not set
CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
# CONFIG_LWIP_IPV6_FORWARD is not set
# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set
CONFIG_LWIP_NETIF_LOOPBACK=y
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
@ -796,7 +874,8 @@ CONFIG_LWIP_MAX_RAW_PCBS=16
#
# SNTP
#
CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
CONFIG_LWIP_SNTP_MAX_SERVERS=1
# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set
CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
# end of SNTP
@ -811,6 +890,9 @@ CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y
# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set
# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y
# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set
# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set
CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
@ -831,6 +913,15 @@ CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
# CONFIG_MBEDTLS_DEBUG is not set
#
# mbedTLS v2.28.x related
#
# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set
# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set
# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set
CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y
# end of mbedTLS v2.28.x related
#
# Certificate Bundle
#
@ -839,6 +930,7 @@ CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200
# end of Certificate Bundle
# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
@ -879,6 +971,7 @@ CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set
# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
CONFIG_MBEDTLS_SSL_ALPN=y
CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
@ -951,6 +1044,8 @@ CONFIG_MDNS_TASK_AFFINITY=0x0
CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
# CONFIG_MDNS_STRICT_MODE is not set
CONFIG_MDNS_TIMER_PERIOD_MS=100
# CONFIG_MDNS_NETWORKING_SOCKET is not set
CONFIG_MDNS_MULTIPLE_INSTANCE=y
# end of mDNS
#
@ -983,6 +1078,7 @@ CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
#
# NVS
#
# CONFIG_NVS_ASSERT_ERROR_CHECK is not set
# end of NVS
#
@ -994,6 +1090,12 @@ CONFIG_OPENSSL_ERROR_STACK=y
CONFIG_OPENSSL_ASSERT_EXIT=y
# end of OpenSSL
#
# OpenThread
#
# CONFIG_OPENTHREAD_ENABLED is not set
# end of OpenThread
#
# PThreads
#
@ -1025,6 +1127,7 @@ CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1
CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192
# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set
# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set
# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set
#
# Auto-detect flash chips
@ -1033,6 +1136,8 @@ CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set
# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set
# end of Auto-detect flash chips
CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
@ -1086,16 +1191,12 @@ CONFIG_WS_BUFFER_SIZE=1024
# end of Websocket
# end of TCP Transport
#
# TinyUSB
#
# end of TinyUSB
#
# Unity unit testing library
#
CONFIG_UNITY_ENABLE_FLOAT=y
CONFIG_UNITY_ENABLE_DOUBLE=y
# CONFIG_UNITY_ENABLE_64BIT is not set
# CONFIG_UNITY_ENABLE_COLOR is not set
CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
# CONFIG_UNITY_ENABLE_FIXTURE is not set
@ -1115,7 +1216,6 @@ CONFIG_VFS_SUPPORT_TERMIOS=y
# Host File System I/O (Semihosting)
#
CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# end of Host File System I/O (Semihosting)
# end of Virtual file system
@ -1132,6 +1232,7 @@ CONFIG_WL_SECTOR_SIZE=4096
#
CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION=y
# end of Wi-Fi Provisioning Manager
#
@ -1139,10 +1240,13 @@ CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
#
CONFIG_WPA_MBEDTLS_CRYPTO=y
# CONFIG_WPA_WAPI_PSK is not set
# CONFIG_WPA_SUITE_B_192 is not set
# CONFIG_WPA_DEBUG_PRINT is not set
# CONFIG_WPA_TESTING_OPTIONS is not set
# CONFIG_WPA_WPS_STRICT is not set
# CONFIG_WPA_11KV_SUPPORT is not set
# CONFIG_WPA_MBO_SUPPORT is not set
# CONFIG_WPA_DPP_SUPPORT is not set
# end of Supplicant
#

Write Preview
Loading…
Cancel
Save