From 593741756870f5639ccdf1f248368048250e2109 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ond=C5=99ej=20Hru=C5=A1ka?= Date: Sat, 20 Aug 2022 14:52:02 +0200 Subject: [PATCH] add atuators control & init --- main/CMakeLists.txt | 1 + main/Kconfig.projbuild | 30 ++++- main/actuators.c | 132 +++++++++++++++++++ main/actuators.h | 30 +++++ main/fanctl_main.c | 2 + main/settings.h | 10 +- sdkconfig | 10 +- sdkconfig.old | 284 ++++++++++++++++++++++++++++------------- 8 files changed, 398 insertions(+), 101 deletions(-) create mode 100644 main/actuators.c create mode 100644 main/actuators.h diff --git a/main/CMakeLists.txt b/main/CMakeLists.txt index 426a1a4..85f8d68 100644 --- a/main/CMakeLists.txt +++ b/main/CMakeLists.txt @@ -6,6 +6,7 @@ idf_component_register(SRCS utils.c wifi_conn.c mbiface.c + actuators.c console/console_ioimpl.c console/console_server.c console/register_cmds.c diff --git a/main/Kconfig.projbuild b/main/Kconfig.projbuild index 65f9bfc..a4a01f4 100644 --- a/main/Kconfig.projbuild +++ b/main/Kconfig.projbuild @@ -1,17 +1,33 @@ menu "IRBLASTER Configuration" menu "Pin mapping" - config PIN_I2C_SDA0 - int "I2C0 SDA" + config PIN_BUZZER + int "Buzzer pin" + default 16 + + config PIN_LED + int "LED pin" + default 17 + + config PIN_BLIND + int "Blind open pin" default 18 - config PIN_I2C_SCL0 - int "I2C0 SCL" + config PIN_PWM + int "Motor PWM pin" default 19 - config PIN_IRLED - int "IR LED" - default 17 + config PIN_DIR + int "Motor direction pin" + default 20 + + config PIN_1WIRE_1 + int "1Wire 1 (indoor)" + default 21 + + config PIN_1WIRE_2 + int "1Wire 2 (outdoor)" + default 22 endmenu menu "Console" diff --git a/main/actuators.c b/main/actuators.c new file mode 100644 index 0000000..a3f6f82 --- /dev/null +++ b/main/actuators.c @@ -0,0 +1,132 @@ +// +// Created by MightyPork on 2022/08/20. +// + +#include +#include "actuators.h" +#include "settings.h" + +struct actuators_status g_Act = { + .blind = false, + .dir = MOTOR_DIR_IN, + .power = 0, +}; + +static void buzzer_init() { + ledc_timer_config_t ledc_timer = { + .duty_resolution = LEDC_TIMER_8_BIT, // resolution of PWM duty + .freq_hz = 4400, // frequency of PWM signal + .speed_mode = LEDC_HIGH_SPEED_MODE, // timer mode + .timer_num = LEDC_TIMER_0, // timer index + .clk_cfg = LEDC_AUTO_CLK, // Auto select the source clock + }; + // Set configuration of timer0 for high speed channels + ledc_timer_config(&ledc_timer); + + ledc_channel_config_t chan = { + .channel = LEDC_CHANNEL_0, + .duty = 127, + .gpio_num = CONFIG_PIN_BUZZER, + .speed_mode = LEDC_HIGH_SPEED_MODE, + .hpoint = 0, + .timer_sel = LEDC_TIMER_0 + }; + ledc_channel_config(&chan); +} + +void act_buzzer_set(bool on) { + g_Act.buzzer = on; + if (on) { + ledc_set_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 127); + ledc_update_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0); + } else { + ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 0); + } +} + +static void motor_init() { + ledc_timer_config_t ledc_timer = { + .duty_resolution = LEDC_TIMER_10_BIT, // resolution of PWM duty + .freq_hz = 1000, // frequency of PWM signal + .speed_mode = LEDC_HIGH_SPEED_MODE, // timer mode + .timer_num = LEDC_TIMER_1, // timer index + .clk_cfg = LEDC_AUTO_CLK, // Auto select the source clock + }; + // Set configuration of timer1 for high speed channels + ledc_timer_config(&ledc_timer); + + // PWM output + ledc_channel_config_t chan = { + .channel = LEDC_CHANNEL_1, + .duty = 512, + .gpio_num = CONFIG_PIN_PWM, + .speed_mode = LEDC_HIGH_SPEED_MODE, + .hpoint = 0, + .timer_sel = LEDC_TIMER_0, + .flags.output_invert = true, + }; + ledc_channel_config(&chan); + + // Direction output + gpio_config_t ioconf = { + .mode = GPIO_MODE_OUTPUT, + .pin_bit_mask = 1 << CONFIG_PIN_DIR, + }; + gpio_config(&ioconf); +} + +void act_motor_power_set(uint16_t perc) { + if (perc > 0) { + if (perc < g_Settings.min_power) { + perc = g_Settings.min_power; + } + g_Act.power = perc; + uint16_t duty = (uint16_t) (10.23f * (float)perc); + if (duty > 1023) { + duty = 1023; + } + ledc_set_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_1, duty); + ledc_update_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_1); + } else { + ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_1, 0); + } +} + +void act_motor_direction_set(enum motor_direction dir) { + g_Act.dir = dir; + gpio_set_level(CONFIG_PIN_DIR, (int) dir); // TODO verify polarity +} + +static void blind_init() { + // Blind output + gpio_config_t ioconf = { + .mode = GPIO_MODE_OUTPUT, + .pin_bit_mask = 1 << CONFIG_PIN_BLIND, + }; + gpio_config(&ioconf); +} + +void act_blind_set(bool open) { + g_Act.blind = open; + gpio_set_level(CONFIG_PIN_BLIND, (int) open); // TODO verify polarity +} + +static void led_init() { + gpio_config_t ioconf = { + .mode = GPIO_MODE_OUTPUT, + .pin_bit_mask = 1 << CONFIG_PIN_LED, + }; + gpio_config(&ioconf); +} + +void act_led_set(bool on) { + g_Act.led = on; + gpio_set_level(CONFIG_PIN_LED, (int) on); // TODO verify polarity +} + +void act_init() { + buzzer_init(); + motor_init(); + blind_init(); + led_init(); +} diff --git a/main/actuators.h b/main/actuators.h new file mode 100644 index 0000000..ff5d154 --- /dev/null +++ b/main/actuators.h @@ -0,0 +1,30 @@ +// +// Created by MightyPork on 2022/08/20. +// + +#ifndef FANCTL_ACTUATORS_H +#define FANCTL_ACTUATORS_H + +enum motor_direction { + MOTOR_DIR_IN = 0, + MOTOR_DIR_OUT = 1 +}; + +struct actuators_status { + enum motor_direction dir; + bool blind; + bool led; + bool buzzer; + uint16_t power; +}; + +extern struct actuators_status g_Act; + +void act_init(); +void act_buzzer_set(bool on); +void act_motor_power_set(uint16_t perc); +void act_motor_direction_set(enum motor_direction dir); +void act_blind_set(bool open); +void act_led_set(bool on); + +#endif //FANCTL_ACTUATORS_H diff --git a/main/fanctl_main.c b/main/fanctl_main.c index d158452..6a0bfa4 100644 --- a/main/fanctl_main.c +++ b/main/fanctl_main.c @@ -20,6 +20,7 @@ #include "console/register_cmds.h" #include "irblast.h" #include "mbiface.h" +#include "actuators.h" static const char *TAG = "main"; @@ -56,6 +57,7 @@ void app_main(void) { console_setup_uart_stdio(); ESP_ERROR_CHECK(console_start_stdio(NULL, NULL)); + act_init(); mbiface_setup(); telnetsrv_start(CONSOLE_TELNET_PORT); diff --git a/main/settings.h b/main/settings.h index 45626ff..2f90c2a 100644 --- a/main/settings.h +++ b/main/settings.h @@ -38,7 +38,15 @@ extern nvs_handle g_nvs_storage; X(uint32_t , static_ip_mask , , 0x00ffffff , true , u32 , &) /* 255.255.255.0 */ \ X(uint32_t , static_ip_gw , , 0x0100a8c0 , true , u32 , &) /* 192.168.0.1 */ \ X(uint32_t , ap_ip , , 0x0100a8c0 , true , u32 , &) /* 192.168.0.1 */ \ - X(uint32_t , static_dns , , 0x08080808 , true , u32 , &) /* 8.8.8.8 */ + X(uint32_t , static_dns , , 0x08080808 , true , u32 , &) /* 8.8.8.8 */ \ + X(uint16_t , recup_mode , , 0 , true , u16 , &) /* recuperator control mode - 0=time, 1=min time+temp equilibrium */ \ + X(uint16_t , recup_time , , 60 , true , u16 , &) /* seconds */ \ + X(uint16_t , start_stop_time, , 3 , true , u16 , &) /* cas rozjezdu nebo zastaveni motoru (s) */ \ + X(uint16_t , blind_time , , 30 , true , u16 , &) /* cas otevreni nebo zavreni rolety (s) */ \ + X(uint16_t , initial_mode , , 0 , true , u16 , &) /* rezim po zapnuti napajeni */ \ + X(uint16_t , initial_power , , 100 , true , u16 , &) /* vychozi vykon */ \ + X(uint16_t , min_power , , 1 , true , u16 , &) /* min power % */ \ + X(bool , summer_mode , , 0 , true , bool , &) /* rezim po zapnuti napajeni */ enum settings_key_enum { #undef X diff --git a/sdkconfig b/sdkconfig index 80fac69..5004db4 100644 --- a/sdkconfig +++ b/sdkconfig @@ -139,9 +139,13 @@ CONFIG_PARTITION_TABLE_MD5=y # # Pin mapping # -CONFIG_PIN_I2C_SDA0=18 -CONFIG_PIN_I2C_SCL0=19 -CONFIG_PIN_IRLED=17 +CONFIG_PIN_BUZZER=16 +CONFIG_PIN_LED=17 +CONFIG_PIN_BLIND=18 +CONFIG_PIN_PWM=19 +CONFIG_PIN_DIR=20 +CONFIG_PIN_1WIRE_1=21 +CONFIG_PIN_1WIRE_2=22 # end of Pin mapping # diff --git a/sdkconfig.old b/sdkconfig.old index c207f12..6753647 100644 --- a/sdkconfig.old +++ b/sdkconfig.old @@ -54,6 +54,7 @@ CONFIG_BOOTLOADER_LOG_LEVEL=3 CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y # CONFIG_BOOTLOADER_FACTORY_RESET is not set # CONFIG_BOOTLOADER_APP_TEST is not set +CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y CONFIG_BOOTLOADER_WDT_ENABLE=y # CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set CONFIG_BOOTLOADER_WDT_TIME_MS=9000 @@ -63,6 +64,7 @@ CONFIG_BOOTLOADER_WDT_TIME_MS=9000 # CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0 # CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set +CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y # end of Bootloader config # @@ -82,6 +84,7 @@ CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200 # CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set CONFIG_ESPTOOLPY_FLASHMODE_DIO=y # CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set +CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y CONFIG_ESPTOOLPY_FLASHMODE="dio" # CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set CONFIG_ESPTOOLPY_FLASHFREQ_40M=y @@ -93,6 +96,9 @@ CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y # CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set # CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set # CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set CONFIG_ESPTOOLPY_FLASHSIZE="2MB" CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y CONFIG_ESPTOOLPY_BEFORE_RESET=y @@ -117,6 +123,7 @@ CONFIG_ESPTOOLPY_MONITOR_BAUD=115200 # Partition Table # CONFIG_PARTITION_TABLE_SINGLE_APP=y +# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set # CONFIG_PARTITION_TABLE_TWO_OTA is not set # CONFIG_PARTITION_TABLE_CUSTOM is not set CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv" @@ -132,9 +139,13 @@ CONFIG_PARTITION_TABLE_MD5=y # # Pin mapping # -CONFIG_PIN_I2C_SDA0=18 -CONFIG_PIN_I2C_SCL0=19 -CONFIG_PIN_IRLED=17 +CONFIG_PIN_BUZZER=16 +CONFIG_PIN_LED=17 +CONFIG_PIN_BLIND=18 +CONFIG_PIN_PWM=19 +CONFIG_PIN_DIR=20 +CONFIG_PIN_1WIRE_1=21 +CONFIG_PIN_1WIRE_2=22 # end of Pin mapping # @@ -148,13 +159,16 @@ CONFIG_CONSOLE_PW_LEN=32 # # Compiler options # -CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y +# CONFIG_COMPILER_OPTIMIZATION_DEFAULT is not set # CONFIG_COMPILER_OPTIMIZATION_SIZE is not set -# CONFIG_COMPILER_OPTIMIZATION_PERF is not set +CONFIG_COMPILER_OPTIMIZATION_PERF=y # CONFIG_COMPILER_OPTIMIZATION_NONE is not set CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set +CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2 +# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set +CONFIG_COMPILER_HIDE_PATHS_MACROS=y # CONFIG_COMPILER_CXX_EXCEPTIONS is not set # CONFIG_COMPILER_CXX_RTTI is not set CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y @@ -173,7 +187,7 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y # # Application Level Tracing # -# CONFIG_APPTRACE_DEST_TRAX is not set +# CONFIG_APPTRACE_DEST_JTAG is not set CONFIG_APPTRACE_DEST_NONE=y CONFIG_APPTRACE_LOCK_ENABLE=y # end of Application Level Tracing @@ -188,35 +202,6 @@ CONFIG_APPTRACE_LOCK_ENABLE=y # Bluetooth # # CONFIG_BT_ENABLED is not set -CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=0 -CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0 -CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0 -CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=0 -CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=0 -CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0 -CONFIG_BTDM_CTRL_PINNED_TO_CORE=0 -CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1 -CONFIG_BT_CTRL_MODE_EFF=1 -CONFIG_BT_CTRL_BLE_MAX_ACT=10 -CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=10 -CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0 -CONFIG_BT_CTRL_PINNED_TO_CORE=0 -CONFIG_BT_CTRL_HCI_TL=1 -CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=30 -CONFIG_BT_CTRL_HW_CCA_EFF=0 -CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF=0 -CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y -CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=100 -CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD=20 -CONFIG_BT_CTRL_BLE_SCAN_DUPL=y -CONFIG_BT_CTRL_SCAN_DUPL_TYPE=0 -CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE=100 -CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF=0 -CONFIG_BT_CTRL_SLEEP_MODE_EFF=0 -CONFIG_BT_CTRL_SLEEP_CLOCK_EFF=0 -CONFIG_BT_CTRL_HCI_TL_EFF=1 -CONFIG_BT_RESERVE_DRAM=0 -CONFIG_BT_NIMBLE_USE_ESP_TIMER=y # end of Bluetooth # @@ -239,6 +224,12 @@ CONFIG_COAP_LOG_DEFAULT_LEVEL=0 CONFIG_ADC_DISABLE_DAC=y # end of ADC configuration +# +# MCPWM configuration +# +# CONFIG_MCPWM_ISR_IN_IRAM is not set +# end of MCPWM configuration + # # SPI configuration # @@ -275,6 +266,13 @@ CONFIG_SPI_SLAVE_ISR_IN_IRAM=y # # CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set # end of GPIO Configuration + +# +# GDMA Configuration +# +# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set +# CONFIG_GDMA_ISR_IRAM_SAFE is not set +# end of GDMA Configuration # end of Driver configurations # @@ -293,6 +291,7 @@ CONFIG_EFUSE_MAX_BLK_LEN=192 # CONFIG_ESP_TLS_USING_MBEDTLS=y # CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set +# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set # CONFIG_ESP_TLS_SERVER is not set # CONFIG_ESP_TLS_PSK_VERIFICATION is not set # CONFIG_ESP_TLS_INSECURE is not set @@ -314,9 +313,6 @@ CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160 # CONFIG_ESP32_SPIRAM_SUPPORT is not set # CONFIG_ESP32_TRAX is not set CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0 -# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set -CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y -CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4 # CONFIG_ESP32_ULP_COPROC_ENABLED is not set CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0 CONFIG_ESP32_DEBUG_OCDAWARE=y @@ -330,7 +326,6 @@ CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y # CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set # CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set CONFIG_ESP32_BROWNOUT_DET_LVL=0 -CONFIG_ESP32_REDUCE_PHY_TX_POWER=y CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y # CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set # CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set @@ -365,32 +360,6 @@ CONFIG_ADC_CAL_LUT_ENABLE=y # Common ESP-related # CONFIG_ESP_ERR_TO_NAME_LOOKUP=y -CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 -CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304 -CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584 -CONFIG_ESP_IPC_TASK_STACK_SIZE=1024 -CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y -CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048 -CONFIG_ESP_CONSOLE_UART_DEFAULT=y -# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set -# CONFIG_ESP_CONSOLE_NONE is not set -CONFIG_ESP_CONSOLE_UART=y -CONFIG_ESP_CONSOLE_MULTIPLE_UART=y -CONFIG_ESP_CONSOLE_UART_NUM=0 -CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 -CONFIG_ESP_INT_WDT=y -CONFIG_ESP_INT_WDT_TIMEOUT_MS=300 -CONFIG_ESP_INT_WDT_CHECK_CPU1=y -CONFIG_ESP_TASK_WDT=y -# CONFIG_ESP_TASK_WDT_PANIC is not set -CONFIG_ESP_TASK_WDT_TIMEOUT_S=5 -CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y -CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y -# CONFIG_ESP_PANIC_HANDLER_IRAM is not set -CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y # end of Common ESP-related # @@ -399,7 +368,6 @@ CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y CONFIG_ETH_ENABLED=y CONFIG_ETH_USE_ESP32_EMAC=y CONFIG_ETH_PHY_INTERFACE_RMII=y -# CONFIG_ETH_PHY_INTERFACE_MII is not set CONFIG_ETH_RMII_CLK_INPUT=y # CONFIG_ETH_RMII_CLK_OUTPUT is not set CONFIG_ETH_RMII_CLK_IN_GPIO=0 @@ -409,6 +377,7 @@ CONFIG_ETH_DMA_TX_BUFFER_NUM=10 CONFIG_ETH_USE_SPI_ETHERNET=y # CONFIG_ETH_SPI_ETHERNET_DM9051 is not set # CONFIG_ETH_SPI_ETHERNET_W5500 is not set +# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set # CONFIG_ETH_USE_OPENETH is not set # end of Ethernet @@ -430,6 +399,7 @@ CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y # CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y # CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set +CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y # end of ESP HTTP client # @@ -455,6 +425,56 @@ CONFIG_HTTPD_PURGE_BUF_LEN=32 # CONFIG_ESP_HTTPS_SERVER_ENABLE is not set # end of ESP HTTPS server +# +# Hardware Settings +# + +# +# MAC Config +# +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y +# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set +CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y +CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4 +# end of MAC Config + +# +# Sleep Config +# +CONFIG_ESP_SLEEP_POWER_DOWN_FLASH=y +CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y +# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set +# CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND is not set +# end of Sleep Config + +# +# RTC Clock Config +# +# end of RTC Clock Config +# end of Hardware Settings + +# +# IPC (Inter-Processor Call) +# +CONFIG_ESP_IPC_TASK_STACK_SIZE=1024 +CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y +CONFIG_ESP_IPC_ISR_ENABLE=y +# end of IPC (Inter-Processor Call) + +# +# LCD and Touch Panel +# + +# +# LCD Peripheral Configuration +# +CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32 +# end of LCD Peripheral Configuration +# end of LCD and Touch Panel + # # ESP NETIF Adapter # @@ -464,6 +484,16 @@ CONFIG_ESP_NETIF_TCPIP_LWIP=y CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y # end of ESP NETIF Adapter +# +# PHY +# +CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y +# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set +CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20 +CONFIG_ESP_PHY_MAX_TX_POWER=20 +CONFIG_ESP_PHY_REDUCE_TX_POWER=y +# end of PHY + # # Power Management # @@ -477,12 +507,40 @@ CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y # CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set # CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set -CONFIG_ESP_SYSTEM_PD_FLASH=y +# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set # # Memory protection # # end of Memory protection + +CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 +CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304 +CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584 +CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y +# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set +# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set +CONFIG_ESP_MAIN_TASK_AFFINITY=0x0 +CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048 +CONFIG_ESP_CONSOLE_UART_DEFAULT=y +# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set +# CONFIG_ESP_CONSOLE_NONE is not set +CONFIG_ESP_CONSOLE_UART=y +CONFIG_ESP_CONSOLE_MULTIPLE_UART=y +CONFIG_ESP_CONSOLE_UART_NUM=0 +CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 +CONFIG_ESP_INT_WDT=y +CONFIG_ESP_INT_WDT_TIMEOUT_MS=300 +CONFIG_ESP_INT_WDT_CHECK_CPU1=y +CONFIG_ESP_TASK_WDT=y +# CONFIG_ESP_TASK_WDT_PANIC is not set +CONFIG_ESP_TASK_WDT_TIMEOUT_S=5 +CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y +CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y +# CONFIG_ESP_PANIC_HANDLER_IRAM is not set +# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set +# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set +CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y # end of ESP System Settings # @@ -492,6 +550,8 @@ CONFIG_ESP_SYSTEM_PD_FLASH=y CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584 +CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1 +# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set # CONFIG_ESP_TIMER_IMPL_FRC2 is not set CONFIG_ESP_TIMER_IMPL_TG0_LAC=y # end of High resolution timer (esp_timer) @@ -499,6 +559,7 @@ CONFIG_ESP_TIMER_IMPL_TG0_LAC=y # # Wi-Fi # +CONFIG_ESP32_WIFI_ENABLED=y CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 # CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set @@ -515,28 +576,15 @@ CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y # CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752 CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32 -# CONFIG_WIFI_LOG_DEFAULT_LEVEL_NONE is not set -# CONFIG_WIFI_LOG_DEFAULT_LEVEL_ERROR is not set -# CONFIG_WIFI_LOG_DEFAULT_LEVEL_WARN is not set -CONFIG_WIFI_LOG_DEFAULT_LEVEL_INFO=y -# CONFIG_WIFI_LOG_DEFAULT_LEVEL_DEBUG is not set -# CONFIG_WIFI_LOG_DEFAULT_LEVEL_VERBOSE is not set CONFIG_ESP32_WIFI_IRAM_OPT=y CONFIG_ESP32_WIFI_RX_IRAM_OPT=y CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y # CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set # CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set +# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set +CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y # end of Wi-Fi -# -# PHY -# -CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y -# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set -CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 -CONFIG_ESP32_PHY_MAX_TX_POWER=20 -# end of PHY - # # Core dump # @@ -597,6 +645,10 @@ CONFIG_FMB_SERIAL_BUF_SIZE=256 CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8 CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000 CONFIG_FMB_PORT_TASK_PRIO=10 +# CONFIG_FMB_PORT_TASK_AFFINITY_NO_AFFINITY is not set +CONFIG_FMB_PORT_TASK_AFFINITY_CPU0=y +# CONFIG_FMB_PORT_TASK_AFFINITY_CPU1 is not set +CONFIG_FMB_PORT_TASK_AFFINITY=0x0 CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233 CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20 @@ -606,6 +658,8 @@ CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20 CONFIG_FMB_TIMER_PORT_ENABLED=y CONFIG_FMB_TIMER_GROUP=0 CONFIG_FMB_TIMER_INDEX=0 +CONFIG_FMB_MASTER_TIMER_GROUP=0 +CONFIG_FMB_MASTER_TIMER_INDEX=0 # CONFIG_FMB_TIMER_ISR_IN_IRAM is not set # end of Modbus configuration @@ -614,8 +668,10 @@ CONFIG_FMB_TIMER_INDEX=0 # # CONFIG_FREERTOS_UNICORE is not set CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF +CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y CONFIG_FREERTOS_CORETIMER_0=y # CONFIG_FREERTOS_CORETIMER_1 is not set +CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y CONFIG_FREERTOS_HZ=1000 CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y # CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set @@ -641,14 +697,25 @@ CONFIG_FREERTOS_USE_TRACE_FACILITY=y CONFIG_FREERTOS_USE_STATS_FORMATTING_FUNCTIONS=y CONFIG_FREERTOS_VTASKLIST_INCLUDE_COREID=y # CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set -CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y # CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set # CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set CONFIG_FREERTOS_DEBUG_OCDAWARE=y # CONFIG_FREERTOS_FPU_IN_ISR is not set +CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y +# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set # end of FreeRTOS +# +# Hardware Abstraction Layer (HAL) and Low Level (LL) +# +CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y +# CONFIG_HAL_ASSERTION_DISABLE is not set +# CONFIG_HAL_ASSERTION_SILIENT is not set +# CONFIG_HAL_ASSERTION_ENABLE is not set +CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2 +# end of Hardware Abstraction Layer (HAL) and Low Level (LL) + # # Heap memory debugging # @@ -683,6 +750,10 @@ CONFIG_LOG_DEFAULT_LEVEL_INFO=y # CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set # CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set CONFIG_LOG_DEFAULT_LEVEL=3 +CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y +# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set +# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set +CONFIG_LOG_MAXIMUM_LEVEL=3 CONFIG_LOG_COLORS=y CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y # CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set @@ -692,6 +763,8 @@ CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y # LWIP # CONFIG_LWIP_LOCAL_HOSTNAME="espressif" +# CONFIG_LWIP_NETIF_API is not set +# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y # CONFIG_LWIP_L2_TO_L3_COPY is not set # CONFIG_LWIP_IRAM_OPTIMIZATION is not set @@ -715,7 +788,9 @@ CONFIG_LWIP_GARP_TMR_INTERVAL=60 CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y # CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set +CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y # CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set +CONFIG_LWIP_DHCP_OPTIONS_LEN=68 # # DHCP server @@ -728,6 +803,9 @@ CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8 # CONFIG_LWIP_AUTOIP is not set CONFIG_LWIP_IPV6=y # CONFIG_LWIP_IPV6_AUTOCONFIG is not set +CONFIG_LWIP_IPV6_NUM_ADDRESSES=3 +# CONFIG_LWIP_IPV6_FORWARD is not set +# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set CONFIG_LWIP_NETIF_LOOPBACK=y CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 @@ -796,7 +874,8 @@ CONFIG_LWIP_MAX_RAW_PCBS=16 # # SNTP # -CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1 +CONFIG_LWIP_SNTP_MAX_SERVERS=1 +# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000 # end of SNTP @@ -811,6 +890,9 @@ CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y # CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set # CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set +CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y +# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set +# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y # CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set # CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set @@ -831,6 +913,15 @@ CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 # CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set # CONFIG_MBEDTLS_DEBUG is not set +# +# mbedTLS v2.28.x related +# +# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set +# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set +# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set +CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y +# end of mbedTLS v2.28.x related + # # Certificate Bundle # @@ -839,6 +930,7 @@ CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y # CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set # CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set # CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200 # end of Certificate Bundle # CONFIG_MBEDTLS_ECP_RESTARTABLE is not set @@ -879,6 +971,7 @@ CONFIG_MBEDTLS_SSL_RENEGOTIATION=y CONFIG_MBEDTLS_SSL_PROTO_TLS1=y CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y +# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set # CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set CONFIG_MBEDTLS_SSL_ALPN=y CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y @@ -951,6 +1044,8 @@ CONFIG_MDNS_TASK_AFFINITY=0x0 CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000 # CONFIG_MDNS_STRICT_MODE is not set CONFIG_MDNS_TIMER_PERIOD_MS=100 +# CONFIG_MDNS_NETWORKING_SOCKET is not set +CONFIG_MDNS_MULTIPLE_INSTANCE=y # end of mDNS # @@ -983,6 +1078,7 @@ CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y # # NVS # +# CONFIG_NVS_ASSERT_ERROR_CHECK is not set # end of NVS # @@ -994,6 +1090,12 @@ CONFIG_OPENSSL_ERROR_STACK=y CONFIG_OPENSSL_ASSERT_EXIT=y # end of OpenSSL +# +# OpenThread +# +# CONFIG_OPENTHREAD_ENABLED is not set +# end of OpenThread + # # PThreads # @@ -1025,6 +1127,7 @@ CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1 CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192 # CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set # CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set +# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set # # Auto-detect flash chips @@ -1033,6 +1136,8 @@ CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y +# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set +# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set # end of Auto-detect flash chips CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y @@ -1086,16 +1191,12 @@ CONFIG_WS_BUFFER_SIZE=1024 # end of Websocket # end of TCP Transport -# -# TinyUSB -# -# end of TinyUSB - # # Unity unit testing library # CONFIG_UNITY_ENABLE_FLOAT=y CONFIG_UNITY_ENABLE_DOUBLE=y +# CONFIG_UNITY_ENABLE_64BIT is not set # CONFIG_UNITY_ENABLE_COLOR is not set CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y # CONFIG_UNITY_ENABLE_FIXTURE is not set @@ -1115,7 +1216,6 @@ CONFIG_VFS_SUPPORT_TERMIOS=y # Host File System I/O (Semihosting) # CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1 -CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128 # end of Host File System I/O (Semihosting) # end of Virtual file system @@ -1132,6 +1232,7 @@ CONFIG_WL_SECTOR_SIZE=4096 # CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16 CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 +CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION=y # end of Wi-Fi Provisioning Manager # @@ -1139,10 +1240,13 @@ CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 # CONFIG_WPA_MBEDTLS_CRYPTO=y # CONFIG_WPA_WAPI_PSK is not set +# CONFIG_WPA_SUITE_B_192 is not set # CONFIG_WPA_DEBUG_PRINT is not set # CONFIG_WPA_TESTING_OPTIONS is not set # CONFIG_WPA_WPS_STRICT is not set # CONFIG_WPA_11KV_SUPPORT is not set +# CONFIG_WPA_MBO_SUPPORT is not set +# CONFIG_WPA_DPP_SUPPORT is not set # end of Supplicant #