You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
67 lines
2.3 KiB
67 lines
2.3 KiB
# AVR C Boilerplate
|
|
|
|
This is a basic boilerplate for programming AVRs in C.
|
|
|
|
The project aims to make programming Arduinos in C fun by
|
|
providing support for basic functionality like GPIO and USART,
|
|
so you can start developing without having the datasheet open
|
|
all the time.
|
|
|
|
It is intended for **ATmega328P** (the chip in Arduinos),
|
|
but can be easily adapted to other parts.
|
|
|
|
## Requirements
|
|
|
|
Before you can start coding, you need to install a few software packages:
|
|
|
|
- `avrdude` - the flash tool
|
|
- `avr-gcc` - compiler
|
|
- `avr-libc` - libc implementation for AVR
|
|
- `avr-binutils` - utils for manipulating AVR binaries
|
|
- `make` - to run the Makefile
|
|
|
|
There's a good chance you already have `make`, the rest should be in your
|
|
distribution's repos.
|
|
|
|
If you're on Arch:
|
|
|
|
```
|
|
# pacman -S base-devel avr-gcc avr-binutils avr-libc avrdude
|
|
```
|
|
|
|
If you're on Mac, you should be able to pull the stuff with *brew*.
|
|
|
|
## Getting started
|
|
|
|
The provided `main.c` is a good starting point - it contains some simple demo code.
|
|
|
|
You can compile it with `make` and flash with `make flash`.
|
|
|
|
### Before you can flash
|
|
|
|
First, check that the `avrdude` options in the file are correct for your system - especially
|
|
the device and speed.
|
|
|
|
```ini
|
|
# AVRDUDE settings
|
|
PROG_BAUD = 57600
|
|
PROG_DEV = /dev/ttyUSB0
|
|
PROG_TYPE = arduino
|
|
|
|
# Build the final AVRDUDE arguments
|
|
PROG_ARGS = -c $(PROG_TYPE) -p $(MCU) -b $(PROG_BAUD) -P $(PROG_DEV)
|
|
```
|
|
|
|
- Adjust `PROG_DEV` to the device your board is connected to. On Linux it's usually `/dev/ttyUSB0`, but it can also be `/dev/ttyACM0` or something else. On Mac, it'll be `/dev/cu.xxx`. On Windows it's some `COMx`.<br>
|
|
Linux and Mac users can use `ls /dev` to see their devices. Windows users will find this in their Device Manager.
|
|
- You may also adjust the baudrate (`PROG_BAUD`). Some boards need `115200`.
|
|
|
|
**TIP:** You can look what the Arduino IDE is using - it's running avrdude too.
|
|
|
|
### Adding new files
|
|
|
|
- If you *add a new C file* to the project, add an entry for it's `.o` (object file,
|
|
created by the compiler before linking) to the `OBJS` list in the Makefile.
|
|
- Similarly, if you *add a new folder with header files*, add it to `INCL_DIRS`.
|
|
- In case you need `printf` (or `printf` with floats), enable the appropriate LD_FLAGS in the Makefile (it's well
|
|
commented). Code size will - obviously - grow quite a bit.
|
|
|