crsn/README.md

# CROISSANT VIRTUAL MACHINE

Croissant (or *crsn* for short) is an extensible runtime emulating a weird microcomputer (or not so micro, that depends on what extensions you install).

## FAQ

### What is this for?

F U N

### How is the performance?

Silly fast, actually. 60fps animations are perfectly doable if that's your thing.
It's probably faster than you need for most things, actually. 

You can slow it down using the `-C` argument, or using sleep instructions.

### What if I don't enjoy writing assembly that looks like weird Lisp?

Maybe this is not for you

### Shebang?

Yes! You can use crsn as a scripting language!

The first line from a source file is skipped if it starts with `#!`

### Contributing

Yup, go ahead. You can also develop your own private *crsn* extensions, they work like plugins.

# Architecture

The runtime is built as a register machine with a stack and status flags.

- All mutable state (registers and status), called "execution frame", is local to the running routine or the root of the program.
- A call pushes the active frame onto a frame stack and a clean frame is created for the callee.
- The frame stack is not accessible to the running program, it is entirely handled by the runtime.
- When a call is made, the new frame's argument registers are pre-filled with arguments passed by the caller.
- Return values are inserted into the callee's frame's result registers before its execution resumes.

## Registers

- 16 general purpose registers `r0`-`r15`
- 16 argument registers `arg0`-`arg15`
- 16 result registers `res0`-`res15`
- 16 global registers `g0`-`g15`

Global registers are accessible everywhere. Other registers are only valid within an execution frame (in a routine, or the initial scope).

All registers are 64-bit unsigned integers that can be treated as
signed, if you want to. Overflow is allowed and reported by status flags.

8-, 16-, 32-bit and floating point arithmetic is not currently implemented, but will be added later. Probably. Maybe.

## Status flags

Arithmetic and other operations set status flags that can be used for conditional jumps.

- Equal … Values are equal
- Lower … A < B
- Greater … A > B
- Zero … Value is zero, buffer is empty, etc.
- Positive … Value is positive
- Negative … Value is negative
- Overflow … Arithmetic overflow or underflow, buffer underflow, etc.
- Invalid … Invalid arguments for an instruction
- Carry … Arithmetic carry; used by extensions (currently unused, planned for the byte/halfword/word versions of the arith module)
- Full … full condition; used by extensions
- Empty … empty condition; used by extensions
- EOF … end of a stream, file, etc; used by extensions

### Status tests (conditions)

These keywords (among others) are used in conditional branches to specify flag tests:

- `eq` … Equal
- `ne` … NotEqual
- `z` … Zero
- `nz` … NotZero
- `lt` … Lower
- `le` … LowerOrEqual
- `gt` … Greater
- `ge` … GreaterOrEqual
- `pos` … Positive
- `neg` … Negative
- `npos` … NonPositive
- `nneg` … NonNegative
- `c` … Carry
- `nc` … NotCarry
- `val`, `valid`, `ok` … Valid
- `inval`, `nok` … Invalid
- `ov` … Overflow
- `nov` … NotOverflow
- `f`, `full` … Full
- `nf`, `nfull` … Not full
- `em`, `empty` … Empty
- `nem`, `nempty` … Not empty
- `eof` … EOF
- `neof` … Not EOF

# Syntax

*The syntax is very much subject to change at the moment. The format described here
is valid at the time this file is added to version control.*

Instructions are written using S-expressions, because they are easy to parse
and everyone loves Lisp.

## Program

A program has this format:

```
(
    ...<instructions and routines>...
)
```

e.g.

```
(
    (ld r0 100)          ; load value into a register
    (:again)             ; a label
    (sub r0 1            ; subtract from a register
        (nz?             ; conditional branch "not zero?"
            (j :again))) ; jump to the label :again
)
```

The same program can be written in a compact form:

```
((ld r0 100)(:again)(sub r0 1 (nz? (j :again))))
```

## Instruction

Instructions are written like this:

```
(<keyword> <args>... <conditional branches>...)
```

### Conditional instructions

All instructions can be made conditional by appending `.<cond>` to the keyword, i.e. `(j.ne :LABEL)` means "jump if not equal".
These modifiers are mainly used by the assembler when translating conditional branches to executable code.

Note that the flags can only be tested immediately after the instruction that produced them, or after instructions that do not 
affect flags (pseudo-instructions like `def` and `sym`, `nop`, `j`, `fj`, `s`, `call` etc). Instructions that can set flags first 
clear all flags to make the result predictable.

Status flags can be saved to and restored from a register using the `stf` and `ldf` instructions. This can also be used to set
or test flags manually, but the binary format may change

### Instruction arguments

Arguments are always ordered writes-first, reads-last.

This document uses the following notation for arguments:
- `REG` - one of the registers (`regX`, `argX`, `resX`)
- `SYM` - a symbol defined as a register alias (e.g. `(sym x r0)`)
- `@REG` / `@SYM` - access an object referenced by a handle. Handle is simply a numeric value stored in a register of some kind.
- `_` - a special "register" that discards anything written to it. 
  The "discard register" is used when you do not need the value and only care about side effects or status flags.
- `CONST` - name of a constant defined earlier in the program (e.g. `(def SCREEN_WIDTH 640)`)
- `NUM` - literal values
   - unsigned `123`
   - signed `-123`
   - float `-45.6789`
   - hex `0xabcd`, `#abcd`
   - binary `0b0101`
   - character `'a'`, `'🐁'`. Supports unicode and C-style escapes. Use `\\` for a literal backslash.
- `"str"` - a double-quoted string (`"ahoj\n"`). Supports unicode and C-style escapes. Use `\\` for a literal backslash.
- `:LABEL` - label name
- `PROC` - routine name
- `PROC/A` - routine name with arity (number of arguments)

The different ways to specify a value can be grouped as "reads" and "writes":

- `Rd` - read: `REG`, `SYM`, `@REG`, `@SYM`, `VALUE`, `CONST`
- `Wr` - writes: `REG`, `SYM`, `@REG`, `@SYM`, `_`
- `RW` - intersection of the two sets, capable of reading and writing: `REG`, `SYM`, `@REG`, `@SYM`

Objects (`@reg`, `@sym`) can be read or written as if they were a register, but only if the referenced object supports it.
Other objects may produce a runtime fault or set the INVALID flag.

In the instruction lists below, I will use the symbols `Rd` for reads, `Wr` for writes, `RW` for read-writes, and `@Obj` for object handles,
with optional description after a colon, such as: `(add Wr:dst Rd:a Rd:b)`.

### Conditional branches

Conditonal branches are written like this:

```
(<cond>? <instructions>...)
```

- If there is more than one conditional branch chained to an instruction,
  then only one branch is taken - there is no fall-through.
- The definition order is preserved, i.e. if the `inval` flag is to be checked, it should be done 
  before checking e.g. `nz`, which is, incidentally, true by default, because most flags are cleared by instructions that affects flags.

## Routines

A routine is defined as:

```
(proc <name>/<arity> instructions...)
```

- `name` is a unique routine name
- `arity` is the number of arguments it takes, e.g. `3`.
  - you can define multiple routines with the same name and different arities, the correct one will be used depending on how it's called

Or, with named arguments:

```
(proc <name> <arguments>... instructions...)
```

Arguments are simply aliases for the argument registers that can then be used inside the routine.

Here is an example routine to calculate the factorial of `arg0`:

```
(proc fac/1
    (cmp arg0 2 (eq? (ret 2)))
    (sub r0 arg0 1)
    (call fac r0)
    (mul r0 arg0 res0)
    (ret r0)
)
```

It can also be written like this:

```
(proc fac num
    ...
)
```

...or by specifying both the arity and argument names:

```
(proc fac/1 num
    ...
)
```
  
# Instruction Set

Crsn instruction set is composed of extensions.
 
Extensions can define new instructions as well as new syntax, so long as it's composed of valid S-expressions.

## Labels, jumps and barriers

These are defined as part of the built-in instruction set (see below).

- Barrier - marks the boundary between routines to prevent overrun. Cannot be jumped across.
- Local labels - can be jumped to within the same routine, both forward and backward.
- Far labels - can be jumped to from any place in the code using a far jump (disregarding barriers).
  This is a very cursed functionality that may or may not have some valid use case.
- Skips - cannot cross a barrier, similar to a jump but without explicitly defining a label.
  All local jumps are turned into skips by the assembler.

Skipping across conditional branches may have *surprising results* - conditional branches are expanded 
to a varying number of skips and conditional instructions by the assembler. Only use skips if you really know what you're doing.

Jumping to a label is always safer than a manual skip.

## Built-in Instructions

...and pseudo-instructions

```
; Do nothing
(nop)

; Stop execution
(halt)

; Define a register alias. 
; The alias is only valid in the current routine or in the root of the program.
; However, if the register is a global register, then the alias is valid everywhere.
(sym SYM REG)

; Define a constant. These are valid in the whole program.
; Value must be known at compile time.
(def CONST VALUE)

; Mark a jump target.
(:LABEL)
; Numbered labels
(:#NUM)

; Mark a far jump target (can be jumped to from another routine).
; This label is preserved in optimized code.
(far :LABEL)

; Jump to a label
(j :LABEL)

; Jump to a label that can be in another function
(fj :LABEL)

; Skip backward or forward
(s Rd)

; Copy a value
(ld Wr Rd)

; Copy a value N times. This is useful when used with stream handles or buffers.
(ldn Wr Rd Rd:count)

; Copy 32 bits of a value
(ld32 Wr Rd)

; Copy 16 bits of a value
(ld16 Wr Rd)

; Copy 8 bits of a value
(ld8 Wr Rd)

; Write a sequence of values, or all codepoints from a string, into the destination.
; This is most useful with object handles, such as a buffer or @cout.
; Functionally, this instruction is equivalent to a sequence of "ld"
(lds Wr (Rd...)) ; example - (lds @cout (65 66 67))
(lds Wr "string")

; Exchange two register's values
(xch RW RW)

; Store status flags to a register
(stf Wr)

; Load status flags from a register
(ldf Rd)

; Mark a routine entry point (call target).
(routine PROC)
(routine PROC/A)

; Call a routine with arguments.
; The arguments are passed as argX. Return values are stored in resX registers.
(call PROC Rd...)

; Exit the current routine with return values
(ret Rd...)

; Generate a run-time fault with a debugger message
(fault)
(fault message)
(fault "message text")

; Deny jumps, skips and run across this address, producing a run-time fault with a message.
(barrier)
(barrier message)
(barrier "message text")

; Block barriers are used for routines. They are automatically skipped in execution
; and the whole pair can be jumped *across*. 
; The label can be a numeric or string label, its sole purpose is tying the two together. They must be unique in the program.
(barrier-open LABEL)
(barrier-close LABEL)
```

## Arithmetic Module

This module makes heavy use of status flags.

Many instructions have two forms:
- 3 args ... explicit source and destination
- 2 args ... destination is also used as the first argument

```lisp
; Test properties of a value - zero, positive, negative
(tst SRC)

; Compare two values. Sets EQ, LT, GT, and Z, POS and NEG if the values equal
(cmp Rd Rd)

; Check if a value is in a range (inclusive).
; Sets the EQ, LT and GT flags. Also sets Z, POS and NEG based on the value.
(rcmp Rd:val Rd:start Rd:end)

; Get a random number
(rng Wr) ; the value will fill all 64 bits of the target
(rng Wr Rd:max) ; 0 to max, max is inclusive
(rng Wr Rd:min Rd:max) ; min to max, both are inclusive

; Add A+B
(add Wr Rd Rd)
(add RW Rd)

; Subtract A-B
(sub Wr Rd Rd)
(sub RW Rd)

; Multiply A*B
(mul Wr Rd Rd)
(mul RW Rd)

; Divide A/B
(div Wr Rd Rd:divider)
(div RW Rd:divider)

; Divide and get remainder
; Both DST and REM are output registers
(divr Wr:result Wr:remainder Rd Rd:divider)
(divr RW Wr:remainder Rd:divider)

; Get remainder A%B
; This is equivalent to (divr _ REM A B),
; except status flags are updated by the remainder value
(mod Wr Rd Rd:divider)
(mod RW Rd:divider)

; Swap the 32-bit halves of a value
; 0x01234567_89abcdef -> 0x89abcdef_01234567
(sw32 Wr Rd)
(sw32 RW)

; Swap 16-bit halves of each 32-bit part
; 0x0123_4567_89ab_cdef -> 0x4567_0123_cdef_89ab
(sw16 Wr Rd)
(sw16 RW)

; Swap bytes in each 16-bit part
; 0x01_23_45_67_89_ab_cd_ef -> 0x23_01_67_45_ab_89_ef_cd
(sw8 Wr Rd)
(sw8 RW)

; Reverse endian (byte order)
(rev Wr Rd)
(rev RW)

; Reverse bit order
(rbit Wr Rd)
(rbit RW)

; Count leading zeros
(clz Wr Rd)
(clz RW)

; Count leading zeros in the lower 32 bits
(clz32 Wr Rd)
(clz32 RW)

; Count leading zeros in the lower 16 bits
(clz16 Wr Rd)
(clz16 RW)

; Count leading zeros in the lower byte
(clz8 Wr Rd)
(clz8 RW)

; Count leading ones
(clo Wr Rd)
(clo RW)

; Count leading ones in the lower 32 bits
(clo32 Wr Rd)
(clo32 RW)

; Count leading ones in the lower 16 bits
(clo16 Wr Rd)
(clo16 RW)

; Count leading ones in the lower byte
(clo8 Wr Rd)
(clo8 RW)

; Sign extend 32-bit to 64 bits
(se32 Wr Rd)
(se32 RW)

; Sign extend 16-bit to 64 bits
(se16 Wr Rd)
(se16 RW)

; Sign extend 8-bit to 64 bits
(se8 Wr Rd)
(se8 RW)

; AND A&B
(and Wr Rd Rd)
(and RW Rd)

; OR A|B
(or Wr Rd Rd)
(or RW Rd)

; XOR A&B
(xor Wr Rd Rd)
(xor RW Rd)

; CPL ~A (negate all bits)
(cpl DST A)
(cpl DST)

; Rotate right (wrap around)
(ror Wr Rd Rd)
(ror RW Rd)

; Rotate left (wrap around)
(rol Wr Rd:value Rd:count)
(rol RW Rd:count)

; Logical shift right (fill with zeros)
(lsr Wr Rd Rd:count)
(lsr RW Rd:count)

; Logical shift left (fill with zeros)
(lsl Wr Rd Rd:count)
(lsl RW Rd:count)

; Arithmetic shift right (copy sign bit)
(asr Wr Rd Rd:count)
(asr RW Rd:count)

; Arithmetic shift left (this is identical to `lsl`, added for completeness)
(asl Wr Rd Rd:count)
(asl RW Rd:count)

; Delete an object by its handle. Objects are used by some extensions.
(del @Rd)
```

## Buffers Module

This module defines dynamic size integer buffers.

A buffer needs to be created using one of the init instructions:

```lisp
; Create an empty buffer and store its handle into a register
(mkbf Wr)

; Create a buffer of a certain size, filled with zeros. 
; COUNT may be a register or an immediate value
(mkbf Wr Rd:count)

; Create a buffer and fill it with characters from a string (unicode code points)
(mkbf Wr "string")

; Create a buffer and fill it with values.
(mkbf Wr (Rd...))
```

Buffers can be as stacks or queues by reading and writing the handle (e.g. `(ld @buf 123)`).
The behavior of reads and writes is configurable per stack, and can be changed at any time.
The default mode is forward queue.

This feature may be a bit confusing at first, but it is extremely powerful.
One consequence of this feature is that `(ld @buf @buf)` will move items from one end to the other 
in one or the other direction (queue mode), or do nothing at all (stack mode).

```list
; Set buffer IO mode
; Mode is one of:
; - BFIO_QUEUE (1)
; - BFIO_RQUEUE (2)
; - BFIO_STACK (3)
; - BFIO_RSTACK (4)
(bfio @Obj MODE)
```

Primitive buffer ops (position is always 0-based)

```lisp
; Get buffer size
(bfsz Wr @Obj)

; Read from a position
(bfrd Wr @Obj Rd:index)

; Write to a position
(bfwr @Obj Rd:index Rd)

; Insert at a position, shifting the rest to the right
(bfins @Obj Rd:index Rd)

; Remove item at a position, shifting the rest to the left to fill the empty space
(bfrm Wr @Obj Rd:index)
```

Whole buffer manipulation:

```lisp
; Resize the buffer. Removes trailing elements or inserts zero to match the new size.
(bfrsz @Obj Rd:len)

; Reverse a buffer
(bfrev @Obj)

; Append a buffer
(bfapp @Obj @Obj:other)

; Prepend a buffer
(bfprep @Obj @Obj:other)
```

Stack-style buffer ops:

```lisp
; Push (insert at the end)
(bfpush @Obj Rd)

; Pop (remove from the end)
(bfpop Wr @Obj)

; Reverse push (insert to the beginning)
(bfrpush @Obj Rd)

; Reverse pop (remove from the beginning)
(bfrpop Wr @Obj)
```

To delete a buffer, use the `del` instruction - `(del @Obj)`

## Screen module

This module uses the minifb rust crate to provide a framebuffer with key and mouse input.

Colors use the `RRGGBB` hex format.

If input events are required, then make sure to periodically call `(sc-blit)` or `(sc-poll)`.
This may not be needed if the auto-blit function is enabled and the display is regularly written.

The default settings are 60 FPS and auto-blit enabled.

NOTE: Logging can significantly reduce crsn run speed.
Make sure the log level is at not set to "trace" when you need high-speed updates, 
such as animations.

```lisp
; Initialize the screen (opens a window)
(sc-init WIDTH HEIGHT)

; Erase the screen (fill with black)
(sc-erase)
; Fill with a custom color
(sc-erase 0xFF00FF)

; Set pixel color
(sc-px X Y COLOR)

; Set screen option. Constants are pre-defined.
; SCREEN_AUTO_BLIT (1) ... auto-blit (blit automatically on pixel write when needed to achieve the target FPS)
; SCREEN_FPS (2) ... frame rate
(sc-opt OPTION VALUE)

; Blit (render the pixel buffer).
; This function also updates key and mouse states and handles the window close button
(sc-blit)
; Blit if needed (when the auto-blit function is enabled)
(sc-blit 0)

; Update key and mouse state, handle the window close button
(sc-poll)

; Read mouse position into two registers.
; Sets the overflow flag if the cursour is out of the window
(sc-mouse X Y)

; Check key status. Keys are 0-127. Reads 1 if the key is pressed, 0 if not.
; A list of supported keys can be found in the extension source code.
(sc-key PRESSED KEY)

; Check mouse button state
; 0-left, 1-right, 2-middle
(sc-mbtn PRESSED BTN)
```

## Stdio module

- This module defines 4 global handles: `@cin`, `@cout`, `@cin_r`, `@cout_r`.
- You can think of these handles as streams or SFRs (special function registers).
  To use them, simply load data to or from the handles (e.g. `(ld r0 @cin)`).
- They operate over unicode code points, which are a superset of ASCII.
- The "_r" variants work with raw bytes. Do not combine them, or you may get problems with multi-byte characters.

End of stream is reported by the 'eof' status flag when a stream is read or written.

You can use these special handles in almost all instructions:

```lisp
(cmp @cin 'y' 
    (eq? (ld @cout '1'))
    (ne? (ld @cout '0')))
```

When you compile a program using such handles, you will get a strange looking assembly:

```
0000 : (ld @0x6372736e00000001 72)
0001 : (ld @0x6372736e00000001 101)
0002 : (ld @0x6372736e00000001 108)
```

These are unique constants assigned to the streams at compile time. They are not meant to be used
directly, but the value can be obtained by simply leaving out the '@' sign: `(ld r0 cin)`. 
That can be useful when these stream handles need to be passed to a function. Obviously this makes
more sense when there are different kinds of streams available, not just these two default ones.

.