add "swap" instr, document buffer ops

README.md

@@ -76,8 +76,8 @@ These keywords (among others) are used in conditional branches to specify flag t
 - `nneg` … NonNegative,
 - `c` … Carry,
 - `nc` … NotCarry,
-- `valid` … Valid,
+- `val`, `valid`, `ok` … Valid,
-- `inval` … Invalid,
+- `inval`, `nok` … Invalid,
 - `ov` … Overflow,
 - `nov` … NotOverflow,
 
@@ -127,19 +127,50 @@ Instructions are written like this:
 
 ### Conditional instructions
 
-All instructions can be made conditional by appending `.<cond>` to the keyword, i.e. `j.ne` means "jump if not equal".
+All instructions can be made conditional by appending `.<cond>` to the keyword, i.e. `(j.ne :LABEL)` means "jump if not equal".
-This is used internally by the assembler when translating conditional branches to executable code.
+These modifiers are mainly used by the assembler when translating conditional branches to executable code.
+
+Note that the flags can only be tested immediately after the instruction that produced them, or after instructions that do not 
+affect flags (pseudo-instructions like `def` and `sym`, `nop`, `j`, `fj`, `s`, `call` etc). Instructions that can set flags first 
+clear all flags to make the result predictable.
+
+Status flags can be saved to and restored from a register using the `stf` and `ldf` instructions. This can also be used to set
+or test flags manually, but the binary format may change
 
 ### Instruction arguments
 
-Args are either:
+Arguments are always ordered writes-first, reads-last.
-- One of the registers (`reg0`, `arg3` etc)
+
-- Names of constants defined earlier in the program (e.g. `SCREEN_WIDTH`)
+This document uses the following notation for arguments:
-- Symbols defined as register aliases (e.g. `x`)
+- `REG` - one of the registers (`regX`, `argX`, `resX`)
-- The "discard register" `_` to discard an output value. That is used when you only care about side effects or status flags.
+- `SYM` - a symbol defined as a register alias (e.g. `(sym x r0)`)
-- Literal values (decimal, hex or binary)
+- `@REG` / `@SYM` - access an object referenced by a handle. Handle is simply a numeric value stored in a register of some kind.
-- Label or routine name (e.g. `factorial`, `:again`)
+- `_` - a special "register" that discards anything written to it. 
-- ...or anything else an installed crsn extension supports
+  The "discard register" is used when you do not need the value and only care about side effects or status flags.
+- `CONST` - name of a constant defined earlier in the program (e.g. `(def SCREEN_WIDTH 640)`)
+- `NUM` - literal values
+   - unsigned `123`
+   - signed `-123`
+   - float `-45.6789`
+   - hex `0xabcd`, `#abcd`
+   - binary `0b0101`
+   - character `'a'`, `'🐁'`. Supports unicode and C-style escapes. Use `\\` for a literal backslash.
+- `"str"` - a double-quoted string (`"ahoj\n"`). Supports unicode and C-style escapes. Use `\\` for a literal backslash.
+- `:LABEL` - label name
+- `PROC` - routine name
+- `PROC/A` - routine name with arity (number of arguments)
+
+The different ways to specify a value can be grouped as "reads" and "writes":
+
+- `Rd` - read: `REG`, `SYM`, `@REG`, `@SYM`, `VALUE`, `CONST`
+- `Wr` - writes: `REG`, `SYM`, `@REG`, `@SYM`, `_`
+- `RW` - intersection of the two sets, capable of reading and writing: `REG`, `SYM`, `@REG`, `@SYM`
+
+Objects (`@reg`, `@sym`) can be read or written as if they were a register, but only if the referenced object supports it.
+Other objects may produce a runtime fault or set the INVALID flag.
+
+In the instruction lists below, I will use the symbols `Rd` for reads, `Wr` for writes, `RW` for read-writes, and `@Obj` for object handles,
+with optional description after a colon, such as: `(add Wr:dst Rd:a Rd:b)`.
 
 ### Conditional branches
 
@@ -236,7 +267,7 @@ Jumping to a label is always safer than a manual skip.
 ; Mark a jump target.
 (:LABEL)
 ; Numbered labels
-(:#NUMBER)
+(:#NUM)
 
 ; Mark a far jump target (can be jumped to from another routine).
 ; This label is preserved in optimized code.
@@ -249,46 +280,50 @@ Jumping to a label is always safer than a manual skip.
 (fj :LABEL)
 
 ; Skip backward or forward
-(s COUNT)
+(s Rd)
 
 ; Mark a routine entry point (call target).
-(routine NAME)
+(routine PROC)
-(routine NAME/ARITY)
+(routine PROC/A)
 
 ; Call a routine with arguments.
 ; The arguments are passed as argX. Return values are stored in resX registers.
-(call ROUTINE ARGUMENTS...)
+(call PROC Rd...)
 
 ; Exit the current routine with return values
-(ret VALUES...)
+(ret Rd...)
 
 ; Deny jumps, skips and run across this address, producing a run-time fault with a message.
 (barrier)
+(barrier message)
 (barrier "message text")
 
 ; Block barriers are used for routines. They are automatically skipped in execution
-; and the whole pair can be jumped *across*
+; and the whole pair can be jumped *across*. 
+; The label can be a numeric or string label, its sole purpose is tying the two together. They must be unique in the program.
 (barrier-open LABEL)
 (barrier-close LABEL)
 
 ; Generate a run-time fault with a debugger message
 (fault)
+(fault message)
 (fault "message text")
 
 ; Copy value
-(ld DST SRC)
+(ld Wr Rd)
 
 ; Store status flags to a register
-(sst DST)
+(stf Wr)
 
 ; Load status flags from a register
-(sld SRC)
+(ldf Rd)
 
 ; Define a register alias. The alias is only valid in the current routine or in the root of the program.
-(sym ALIAS REGISTER)
+(sym SYM REG)
 
 ; Define a constant. These are valid in the whole program.
-(def NAME VALUE)
+; Value must be known at compile time.
+(def CONST VALUE)
 ```
 
 ## Arithmetic Module
@@ -304,101 +339,152 @@ Many instructions have two forms:
 (tst SRC)
 
 ; Compare two values
-(cmp A B)
+(cmp Rd Rd)
 
 ; Add A+B
-(add DST A B)
+(add Wr Rd Rd)
-(add DST B)
+(add RW Rd)
 
 ; Subtract A-B
-(sub DST A B)
+(sub Wr Rd Rd)
-(sub DST B)
+(sub RW Rd)
 
 ; Multiply A*B
-(mul DST A B)
+(mul Wr Rd Rd)
-(mul DST B)
+(mul RW Rd)
 
 ; Divide A/B
-(div DST A B)
+(div Wr Rd Rd:divider)
-(div DST B)
+(div RW Rd:divider)
 
 ; Divide and get remainder
 ; Both DST and REM are output registers
-(divr DST REM A B)
+(divr Wr:result Wr:remainder Rd Rd:divider)
-(divr DST REM B)
+(divr RW Wr:remainder Rd:divider)
 
 ; Get remainder A%B
 ; This is equivalent to (divr _ REM A B),
 ; except status flags are updated by the remainder value
-(mod DST A B)
+(mod Wr Rd Rd-divider)
-(mod DST B)
+(mod RW Rd-divider)
 
 ; AND A&B
-(and DST A B)
+(and Wr Rd Rd)
-(and DST B)
+(and RW Rd)
 
 ; OR A|B
-(or DST A B)
+(or Wr Rd Rd)
-(or DST B)
+(or RW Rd)
 
 ; XOR A&B
-(xor DST A B)
+(xor Wr Rd Rd)
-(xor DST B)
+(xor RW Rd)
 
 ; CPL ~A (negate all bits)
 (cpl DST A)
 (cpl DST)
 
 ; Rotate right (wrap around)
-(ror DST A B)
+(ror Wr Rd Rd)
-(ror DST B)
+(ror RW Rd)
 
 ; Rotate left (wrap around)
-(rol DST A B)
+(rol Wr Rd:value Rd:count)
-(rol DST B)
+(rol RW Rd:count)
 
 ; Logical shift right (fill with zeros)
-(lsr DST A B)
+(lsr Wr Rd Rd:count)
-(lsr DST B)
+(lsr RW Rd:count)
 
 ; Logical shift left (fill with zeros)
-(lsl DST A B)
+(lsl Wr Rd Rd:count)
-(lsl DST B)
+(lsl RW Rd:count)
 
 ; Arithmetic shift right (copy sign bit)
-(asr DST A B)
+(asr Wr Rd Rd:count)
-(asr DST B)
+(asr RW Rd:count)
 
 ; Arithmetic shift left (this is identical to `lsl`, added for completeness)
-(asl DST A B)
+(asl Wr Rd Rd:count)
-(asl DST B)
+(asl RW Rd:count)
 
 ; Delete an object by its handle. Objects are used by some extensions.
-(del @REG)
+(del @Rd)
+```
+
+## Buffers Module
+
+This module defines dynamic size integer buffers.
+
+A buffer needs to be created using one of the init instructions:
+
+```
+; Create an empty buffer and store its handle into a register
+(mkbf Wr)
+
+; Create a buffer of a certain size, filled with zeros. 
+; COUNT may be a register or an immediate value
+(mkbf Wr Rd:count)
+
+; Create a buffer and fill it with characters from a string (unicode code points)
+(mkbf Wr "string")
+
+; Create a buffer and fill it with values.
+(mkbf Wr (Rd...))
+```
+
+Primitive buffer ops (position is always 0-based)
+
+```
+; Get buffer size
+(bfsz Wr @Obj)
+
+; Read from a position
+(bfrd Wr @Obj Rd:index)
+
+; Write to a position
+(bfwr @Obj Rd:index Rd)
+
+; Insert at a position, shifting the rest to the right
+(bfins @Obj Rd:index Rd)
+
+; Remove item at a position, shifting the rest to the left to fill the empty space
+(bfrm Wr @Obj Rd:index)
+```
+
+Whole buffer manipulation:
+
 ```
+; Resize the buffer. Removes trailing elements or inserts zero to match the new size.
+(bfrsz @Obj Rd:len)
 
-## Stacks Module
+; Reverse a buffer
+(bfrev @Obj)
 
-This module defines data stacks. Stacks can be shared by routines by passing a handle.
+; Append a buffer
+(bfapp @Obj @Obj:other)
 
+; Prepend a buffer
+(bfprep @Obj @Obj:other)
 ```
-; Create a stack. The register then contains the stack handle.
-(stack REG)
 
-; Push to a stack (insert to the end)
+Stack-style buffer ops:
-(push @REG VALUE)
+
+```
+; Push (insert at the end)
+(bfpush @Obj Rd)
 
-; Pop from a stack (remove from the end)
+; Pop (remove from the end)
-(pop DST @REG)
+(bfpop Wr @Obj)
 
-; Reverse push to a stack (insert to the beginning)
+; Reverse push (insert to the beginning)
-(rpush @REG VALUE)
+(bfrpush @Obj Rd)
 
-; Reverse pop from a stack (remove from the beginning)
+; Reverse pop (remove from the beginning)
-(rpop DST @REG)
+(bfrpop Wr @Obj)
 ```
 
-To delete a stack, use the `del` instruction - `(del @REG)`
+To delete a buffer, use the `del` instruction - `(del @Obj)`
 
 ## Screen module
 
@@ -456,7 +542,7 @@ such as animations.
 
 ## Stdio module
 
-- This module currently defines two global handles: `@stdin` and `@stdout`.
+- This module currently defines two global handles (resp. constants): `@stdin` and `@stdout`.
 - You can think of these handles as streams or SFRs (special function registers).
   To use them, simply load data to or from the handles (e.g. `(ld r0 @stdin)`).
 - They operate over unicode code points, which are a superset of ASCII.

crsn/src/asm/instr/cond.rs

@@ -71,12 +71,12 @@ pub fn parse_cond(text: &str, pos: &SourcePosition) -> Result<Cond, CrsnError> {
         "nneg" | "0+" | ">=0" | "≤0" => Cond::NonNegative,
         "c" => Cond::Carry,
         "nc" => Cond::NotCarry,
-        "em" => Cond::Empty,
+        "em" | "empty" => Cond::Empty,
-        "nem" => Cond::NotEmpty,
+        "nem" | "nempty" => Cond::NotEmpty,
-        "f" => Cond::Full,
+        "f" | "full" => Cond::Full,
-        "nf" => Cond::NotFull,
+        "nf" | "nfull" => Cond::NotFull,
-        "valid" => Cond::Valid,
+        "ok" | "val" | "valid" => Cond::Valid,
-        "inval" => Cond::Invalid,
+        "inval" | "invalid" | "nval" | "nok" => Cond::Invalid,
         "ov" => Cond::Overflow,
         "nov" => Cond::NotOverflow,
         _ => {

crsn/src/builtin/defs.rs

@@ -71,7 +71,9 @@ pub enum BuiltinOp {
     /// The object is released and the handle becomes invalid.
     Delete(RdObj),
     /// Copy value
-    Move { dst: Wr, src: Rd },
+    MoveValue { dst: Wr, src: Rd },
+    /// Swap two registers
+    SwapValues { a: Wr, b: Wr },
     /// Store runtime status to a register
     StoreFlags { dst: Wr },
     /// Load runtime status from a register

crsn/src/builtin/exec.rs

@@ -103,12 +103,18 @@ impl OpTrait for BuiltinOp {
                 let pc = state.get_pc();
                 program.validate_jump(pc, Addr((pc.0 as i64 + res.advance) as u64))?;
             }
-            BuiltinOp::Move { dst, src } => {
+            BuiltinOp::MoveValue { dst, src } => {
                 state.clear_status();
                 let val = state.read(*src)?;
                 state.update_status(val);
                 state.write(*dst, val)?;
             }
+            BuiltinOp::SwapValues { a, b } => {
+                let aa = state.read(a.as_rd())?;
+                let bb = state.read(b.as_rd())?;
+                state.write(*a, bb)?;
+                state.write(*b, aa)?;
+            }
             BuiltinOp::StoreFlags { dst } => {
                 let packed = state.frame.status.store();
                 state.write(*dst, packed)?;

crsn/src/builtin/parse.rs

@@ -177,12 +177,19 @@ pub(crate) fn parse_op<'a>(op_pos: &SourcePosition, keyword: &str, mut args: Tok
         }
 
         "ld" => {
-            BuiltinOp::Move {
+            BuiltinOp::MoveValue {
                 dst: args.next_wr()?,
                 src: args.next_rd()?,
             }
         }
 
+        "swap" => {
+            BuiltinOp::SwapValues {
+                a: args.next_wr()?,
+                b: args.next_wr()?,
+            }
+        }
+
         "stf" => {
             BuiltinOp::StoreFlags {
                 dst: args.next_wr()?,
@@ -295,7 +302,8 @@ pub(crate) fn to_sexp(op: &BuiltinOp) -> Sexp {
             }
         }
         BuiltinOp::Delete(obj) => sexp::list(&[A("del"), A(obj)]),
-        BuiltinOp::Move { dst, src } => sexp::list(&[A("ld"), A(dst), A(src)]),
+        BuiltinOp::MoveValue { dst, src } => sexp::list(&[A("ld"), A(dst), A(src)]),
+        BuiltinOp::SwapValues { a, b } => sexp::list(&[A("swp"), A(a), A(b)]),
         BuiltinOp::StoreFlags { dst } => sexp::list(&[A("stf"), A(dst)]),
         BuiltinOp::LoadFlags { src } => sexp::list(&[A("ldf"), A(src)])
     }
@@ -364,6 +372,7 @@ mod test {
             ("(fault)", "(fault)"),
             ("(fault kur*a)", "(fault kur*a)"),
             ("(fault \"do pr*ele\")", "(fault \"do pr*ele\")"),
+            ("(swap r0 r1)", "(swap r0 r1)"),
             ("(ld r0 r0)", "(ld r0 r0)"),
             ("(ld r0 156)", "(ld r0 156)"),
             ("(ld _ -32767)", "(ld _ -32767)"),

crsn_buf/src/parse.rs

@@ -12,40 +12,32 @@ pub(crate) fn parse<'a>(_pos: &SourcePosition, keyword: &str, mut args: TokenPar
     Ok(ParseRes::ext(match keyword {
         "mkbf" => {
             let dst = args.next_wr()?;
-            let len = if args.have_more() {
-                args.next_rd()?
-            } else {
-                Rd::immediate(0)
-            };
-            BufOps::New { dst, value: BufValue::Zeros(len) }
-        }
-
-        "mkbfv" => {
-            let dst = args.next_wr()?;
-
-            let next = args.next_or_err()?;
 
-            match next {
+            let value = match args.next() {
-                Sexp::Atom(Atom::QS(s), _) => {
+                None => {
-                    BufOps::New {
+                    BufValue::Zeros(Rd::immediate(0))
-                        dst,
-                        value: BufValue::Chars(s),
-                    }
                 }
-                Sexp::List(list, _) => {
+                Some(tok @ Sexp::Atom(Atom::S(_), _)) |
+                Some(tok @ Sexp::Atom(Atom::I(_), _)) |
+                Some(tok @ Sexp::Atom(Atom::U(_), _)) => {
+                    BufValue::Zeros(parse_rd(tok, args.pcx)?)
+                }
+                Some(Sexp::Atom(Atom::QS(s), _)) => {
+                    BufValue::Chars(s)
+                }
+                Some(Sexp::List(list, _)) => {
                     let mut vals = vec![];
                     for v in list {
                         vals.push(parse_rd(v, args.pcx)?);
                     }
-                    BufOps::New {
+                    BufValue::Values(vals)
-                        dst,
-                        value: BufValue::Values(vals),
-                    }
                 }
-                other => {
+                Some(other) => {
                     return Err(CrsnError::Parse("Expected quoted string or a tuple of values".into(), other.pos().clone()));
                 }
-            }
+            };
+
+            BufOps::New { dst, value }
         }
 
         "bfrd" => {

examples/number_array.csn

@@ -1,7 +1,7 @@
 (
     (ld r0 65)
     (sym buf r7)
-    (mkbfv buf (r0 66 67 68 '\n'))
+    (mkbf buf (r0 66 67 68 '\n'))
 
     (bfrpop @stdout @buf)
     (s.nem -1)

examples/stdio.csn

@@ -4,9 +4,9 @@
     (def T_HELLO 0)
     (def T_UNK 1)
     (mkbf TXT)
-    (mkbfv r0 "*** Type ascii to uppercase. Press q to quit. ***\n")
+    (mkbf r0 "*** Type ascii to uppercase. Press q to quit. ***\n")
     (bfins @TXT T_HELLO r0)
-    (mkbfv r0 "🐈")
+    (mkbf r0 "🐈")
     (bfins @TXT T_UNK r0)
 
     ; Print string from the table