gex
/
gex-nrf-dongle
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

kinda works but unreliable

Browse Source
porting
Ondřej Hruška 7 years ago
parent f22934e236
commit 56191d621a
Signed by: MightyPork
GPG Key ID: 2C5FD5035250423D
4 changed files with 132 additions and 123 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 11
      Inc/main.h
  2. 16
      Src/gex_gateway.c
  3. 13
      Src/gpio.c
  4. 37
      Src/main.c

11
Inc/main.h
Unescape View File

@ -74,14 +74,19 @@
/* Private define ------------------------------------------------------------*/
#define LED_Pin LL_GPIO_PIN_13
#define LED_GPIO_Port GPIOC
#define NRF_IRQ_Pin LL_GPIO_PIN_2
#define LED1_Pin LL_GPIO_PIN_13
#define LEDRX_Pin LL_GPIO_PIN_14
#define LEDTX_Pin LL_GPIO_PIN_15
#define NRF_IRQ_Pin LL_GPIO_PIN_1
#define NRF_IRQ_GPIO_Port GPIOA
#define NRF_CE_Pin LL_GPIO_PIN_3
#define NRF_CE_GPIO_Port GPIOA
#define NRF_NSS_Pin LL_GPIO_PIN_4
#define NRF_NSS_Pin LL_GPIO_PIN_2
#define NRF_NSS_GPIO_Port GPIOA
#define RENUM_Pin LL_GPIO_PIN_0
#define RENUM_GPIO_Port GPIOA
/* ########################## Assert Selection ############################## */
/**

16
Src/gex_gateway.c
Unescape View File

@ -48,8 +48,6 @@ static uint8_t txmsg_payload[MAX_FRAME_LEN]; // equal buffer size in GEX
static uint8_t txmsg_addr = 0;
static uint8_t txmsg_cksum = 0;
#define MAGIC_GW_COMMAND 0x47U // 'G'
enum GW_CMD {
CMD_GET_ID = 'i', // 105 - get network ID
CMD_RESET = 'r', // reset the radio and network
@ -137,6 +135,7 @@ void handle_txframe_chunk(const uint8_t *buffer, uint16_t size)
}
}
LL_GPIO_ResetOutputPin(LED_GPIO_Port, LEDTX_Pin);
cmd_state = CMD_STATE_IDLE;
}
}
@ -147,12 +146,6 @@ void gw_handle_usb_out(uint8_t *buffer)
PayloadParser pp = pp_start(buffer, 64, NULL);
// handle binary commands for the gateway
// magic twice, one inverted - denotes a gateway command
const uint16_t magic1 = pp_u8(&pp);
const uint16_t magic2 = pp_u8(&pp);
if (magic1 == MAGIC_GW_COMMAND && magic2 == (0xFFU & (~MAGIC_GW_COMMAND))) {
// third byte is the command code
switch (pp_u8(&pp)) {
case CMD_GET_ID:
respond_gw_id();
@ -179,6 +172,7 @@ void gw_handle_usb_out(uint8_t *buffer)
break;
}
LL_GPIO_SetOutputPin(LED_GPIO_Port, LEDTX_Pin);
start_slave_cmd(slave_addr, frame_len, cksum);
dbg_nrf("Collecting frame for slave %02x: %d bytes", (int)slave_addr, (int)frame_len);
cmd_state = CMD_STATE_TXMSG;
@ -192,12 +186,9 @@ void gw_handle_usb_out(uint8_t *buffer)
default:
dbg("Bad cmd");
}
} else {
// Bad frame??
dbg("Bad USB frame, starts %x,%x", buffer[0],buffer[1]);
}
}
else if (cmd_state == CMD_STATE_TXMSG) {
LL_GPIO_SetOutputPin(LED_GPIO_Port, LEDTX_Pin);
handle_txframe_chunk(buffer, 64);
}
}
@ -288,6 +279,7 @@ void gw_setup_radio(void)
void EXTI2_IRQHandler(void)
{
LL_EXTI_ClearFlag_0_31(LL_EXTI_LINE_2);
LL_GPIO_SetOutputPin(LED_GPIO_Port, LEDRX_Pin);
struct msg_data m;
m.msg_type = MSG_TYPE_DATA;

13
Src/gpio.c
Unescape View File

@ -79,20 +79,23 @@ void MX_GPIO_Init(void)
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOA);
/**/
LL_GPIO_ResetOutputPin(LED_GPIO_Port, LED_Pin);
LL_GPIO_ResetOutputPin(LED_GPIO_Port, LED1_Pin);
LL_GPIO_ResetOutputPin(LED_GPIO_Port, LEDRX_Pin);
LL_GPIO_ResetOutputPin(LED_GPIO_Port, LEDTX_Pin);
LL_GPIO_SetOutputPin(RENUM_GPIO_Port, RENUM_Pin);
/**/
// LL_GPIO_ResetOutputPin(GPIOA, NRF_CE_Pin|NRF_NSS_Pin);
/**/
GPIO_InitStruct.Pin = LED_Pin;
GPIO_InitStruct.Pin = LED1_Pin|LEDRX_Pin|LEDTX_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
LL_GPIO_Init(LED_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = NRF_CE_Pin|NRF_NSS_Pin;
GPIO_InitStruct.Pin = NRF_CE_Pin|NRF_NSS_Pin|RENUM_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
@ -100,10 +103,10 @@ void MX_GPIO_Init(void)
#if 1
/**/
LL_GPIO_AF_SetEXTISource(LL_GPIO_AF_EXTI_PORTA, LL_GPIO_AF_EXTI_LINE2);
LL_GPIO_AF_SetEXTISource(LL_GPIO_AF_EXTI_PORTA, LL_GPIO_AF_EXTI_LINE1); // IRQ on PA1
/**/
EXTI_InitStruct.Line_0_31 = LL_EXTI_LINE_2;
EXTI_InitStruct.Line_0_31 = LL_EXTI_LINE_1;
EXTI_InitStruct.LineCommand = ENABLE;
EXTI_InitStruct.Mode = LL_EXTI_MODE_IT;
EXTI_InitStruct.Trigger = LL_EXTI_TRIGGER_FALLING;

37
Src/main.c
Unescape View File

@ -128,6 +128,11 @@ int main(void)
gw_setup_radio();
mq_init(&usb_inq);
// re-enumerate USB
LL_GPIO_SetOutputPin(RENUM_GPIO_Port, RENUM_Pin);
LL_mDelay(100);
LL_GPIO_ResetOutputPin(RENUM_GPIO_Port, RENUM_Pin);
dbg("Main loop starts.");
/* Infinite loop */
/* USER CODE BEGIN WHILE */
@ -135,8 +140,12 @@ int main(void)
uint8_t buff[MQ_SLOT_LEN];
while (1) {
if (cnt++ > 500000) {
LL_GPIO_TogglePin(LED_GPIO_Port, LED_Pin);
cnt++;
if (cnt > 1400000) {
LL_GPIO_SetOutputPin(LED_GPIO_Port, LED1_Pin);
}
if (cnt > 1500000) {
LL_GPIO_ResetOutputPin(LED_GPIO_Port, LED1_Pin);
cnt = 0;
}
@ -144,6 +153,9 @@ int main(void)
if (!usb_tx_busy) {
mq_read(&usb_inq, buff);
CDC_Transmit_FS(buff, MQ_SLOT_LEN);
// blinking - maybe this will work .. not sure
LL_GPIO_ResetOutputPin(LED_GPIO_Port, LEDRX_Pin);
}
}
}
@ -160,15 +172,13 @@ void SystemClock_Config(void)
LL_FLASH_SetLatency(LL_FLASH_LATENCY_2);
if(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_2)
{
if (LL_FLASH_GetLatency() != LL_FLASH_LATENCY_2) {
Error_Handler();
}
LL_RCC_HSE_Enable();
/* Wait till HSE is ready */
while(LL_RCC_HSE_IsReady() != 1)
{
while (LL_RCC_HSE_IsReady() != 1) {
}
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE_DIV_1, LL_RCC_PLL_MUL_9);
@ -176,8 +186,7 @@ void SystemClock_Config(void)
LL_RCC_PLL_Enable();
/* Wait till PLL is ready */
while(LL_RCC_PLL_IsReady() != 1)
{
while (LL_RCC_PLL_IsReady() != 1) {
}
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
@ -189,8 +198,7 @@ void SystemClock_Config(void)
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
/* Wait till System clock is ready */
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
{
while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) {
}
LL_Init1msTick(72000000);
@ -202,7 +210,7 @@ void SystemClock_Config(void)
LL_RCC_SetUSBClockSource(LL_RCC_USB_CLKSOURCE_PLL_DIV_1_5);
/* SysTick_IRQn interrupt configuration */
NVIC_SetPriority(SysTick_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0));
NVIC_SetPriority(SysTick_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 0, 0));
}
/* USER CODE BEGIN 4 */
@ -219,13 +227,13 @@ void _Error_Handler(char *file, int line)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
while(1)
{
while (1) {
}
/* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
@ -233,13 +241,14 @@ void _Error_Handler(char *file, int line)
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t* file, uint32_t line)
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */
/**

Write Preview
Loading…
Cancel
Save