GEX port to STM32F072. This is currently the main port.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
gex-f072/build.mk.example

39 lines
1.2 KiB

# GEX platform
# - alternate configurations defining board layout and capabilities
GEX_PLAT=F072_ZERO
#GEX_PLAT=F072_HUB
#GEX_PLAT=F072_DISCOVERY
# Disable debug UART (saves some Flash and RAM)
DISABLE_DEBUG = 0
# Disable USB Mass Storage support
# - significant FLASH and RAM savings, but the virtual filesystem will be
# accessible only through the communication interface
DISABLE_MSC = 0
# Disconnect GEX from the USB library, and connect CDC/ACM Rx directly to Tx
# - this is used during porting / USB debugging to verify the USB subsystem
# is configured correcctly
CDC_LOOPBACK_TEST = 0
# Enabled GEX units
# - comment out units you don't want to include in the firmware image
# - additional units have minimal impact on performance, but take up space
# in the Flash memory; enabling all units at once might not even be possible
# due to this limitation
# - this also lets you switch between alternate implementations
GEX_UNITS += 1wire
GEX_UNITS += adc
GEX_UNITS += dac
GEX_UNITS += din
GEX_UNITS += dout
GEX_UNITS += fcap
GEX_UNITS += i2c
GEX_UNITS += neopixel
GEX_UNITS += pwmdim
GEX_UNITS += sipo
GEX_UNITS += spi
GEX_UNITS += touch
GEX_UNITS += usart