Enable double buffered mode in USB

FreeRTOSConfig.h

@@ -109,8 +109,9 @@ extern uint32_t SystemCoreClock;
 #define configQUEUE_REGISTRY_SIZE                0
 #define configCHECK_FOR_STACK_OVERFLOW           2
 #define configENABLE_BACKWARD_COMPATIBILITY      0
+#define configUSE_COUNTING_SEMAPHORES            0
 
-#define configUSE_TIMERS                         1
+#define configUSE_TIMERS                         0
 #define configTIMER_TASK_PRIORITY                TSK_TIMERS_PRIO // above normal
 #define configTIMER_TASK_STACK_DEPTH             TSK_STACK_TIMERS //128
 #define configTIMER_QUEUE_LENGTH                 4

TinyFrame/TF_Integration.c

@@ -4,6 +4,7 @@
 // TinyFrame integration
 //
 
+#include <USB/usb_device.h>
 #include "platform.h"
 #include "task_main.h"
 
@@ -26,6 +27,11 @@ void TF_WriteImpl(TinyFrame *tf, const uint8_t *buff, uint32_t len)
         }
 
         const uint16_t chunksize = (uint16_t) MIN(total, CHUNK);
+
+        // this is an attempt to speed it up a little by removing a couple levels of indirection
+//        assert_param(HAL_OK == HAL_PCD_EP_Transmit(hUsbDeviceFS.pData, CDC_IN_EP, (uint8_t *) buff, chunksize));
+
+//        USBD_LL_Transmit(&hUsbDeviceFS, CDC_IN_EP, (uint8_t *) buff, chunksize);
         assert_param(USBD_OK == CDC_Transmit_FS((uint8_t *) buff, chunksize));
 
         buff += chunksize;

USB/usb_device.c

@@ -66,6 +66,7 @@ PCD_HandleTypeDef hpcd_USB_FS;
 /* init function */                                        
 void MX_USB_DEVICE_Init(void)
 {
+  dbg("USB device init ...");
   /* USER CODE BEGIN USB_DEVICE_Init_PreTreatment */
   
   /* USER CODE END USB_DEVICE_Init_PreTreatment */

USB/usbd_cdc_if.c

@@ -313,6 +313,8 @@ void USBD_CDC_TransmitDone(USBD_HandleTypeDef *pdev)
   assert_param(semVcomTxReadyHandle != NULL);
   assert_param(inIRQ());
 
+  if (uxSemaphoreGetCount(semVcomTxReadyHandle) == 1) return;
+
   portBASE_TYPE taskWoken = pdFALSE;
   assert_param(xSemaphoreGiveFromISR(semVcomTxReadyHandle, &taskWoken) == pdTRUE);
   portYIELD_FROM_ISR(taskWoken);

USB/usbd_conf.c

@@ -397,8 +397,16 @@ USBD_StatusTypeDef  USBD_LL_Init (USBD_HandleTypeDef *pdev)
   HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , MSC_EPOUT_ADDR , PCD_SNG_BUF, ptr += 64); // 64
 
   // CDC endpoints, EP2 two-way and EP3 in-only
-  HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , CDC_IN_EP , PCD_SNG_BUF, ptr += 64); // 64
-  HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , CDC_OUT_EP , PCD_SNG_BUF, ptr += 64); // 64
+    uint32_t buf1addr, buf2addr;
+
+    buf1addr = (ptr += 64);
+    buf2addr = (ptr += 64);
+  HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , CDC_IN_EP , PCD_DBL_BUF, buf1addr | (buf2addr << 16)); // 64
+
+    buf1addr = (ptr += 64);
+    buf2addr = (ptr += 64);
+  HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , CDC_OUT_EP , PCD_DBL_BUF, buf1addr | (buf2addr << 16)); // 64
+
   HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , CDC_CMD_EP , PCD_SNG_BUF, ptr += 16); // 16
   (void)ptr;
 #endif

USB/usbd_conf.h

@@ -99,7 +99,7 @@
 
 #define CDC_CUSTOM_EPS
 #define CDC_IN_EP                    0x82  /* EP1 for data IN */
-#define CDC_OUT_EP                   0x02  /* EP1 for data OUT */
+#define CDC_OUT_EP                   0x04  /* EP1 for data OUT */
 #define CDC_CMD_EP                   0x83  /* EP2 for CDC commands */
 
 /** @defgroup USBD_Exported_Macros

comm/messages.c

@@ -2,6 +2,7 @@
 // Created by MightyPork on 2017/11/21.
 //
 
+#include <platform/status_led.h>
 #include "platform.h"
 #include "framework/settings.h"
 #include "utils/ini_parser.h"
@@ -91,6 +92,7 @@ static TF_Result lst_ini_export(TinyFrame *tf, TF_Msg *msg)
     bulk->userdata = NULL;
 
     bulkread_start(tf, bulk);
+    Indicator_Effect(STATUS_DISK_BUSY_SHORT);
 
     return TF_STAY;
 }
@@ -152,6 +154,8 @@ static TF_Result lst_ini_import(TinyFrame *tf, TF_Msg *msg)
 
     bulkwrite_start(tf, bulk);
 
+    Indicator_Effect(STATUS_DISK_BUSY);
+
 done:
     return TF_STAY;
 }
@@ -161,6 +165,7 @@ done:
 /** Listener: Save settings to Flash */
 static TF_Result lst_persist_cfg(TinyFrame *tf, TF_Msg *msg)
 {
+    Indicator_Effect(STATUS_DISK_REMOVED);
     settings_save();
     return TF_STAY;
 }

cortex_handlers.c

@@ -13,8 +13,10 @@
 
 void SysTick_Handler(void)
 {
-    GEX_MsTick();
+    // OS first, avoids jitter
     osSystickHandler();
+    // GEX periodic updates
+    GEX_MsTick();
 }
 
 

framework/resources.c

@@ -33,12 +33,6 @@ const char * rsc_get_name(Resource rsc)
     // we assume the returned value is not stored anywhere
     // and is directly used in a sprintf call, hence a static buffer is OK to use
 
-    if (rsc >= R_EXTI0 && rsc <= R_EXTI15) {
-        uint8_t index = rsc - R_EXTI0;
-        SNPRINTF(gpionamebuf, 8, "EXTI%d", index);
-        return gpionamebuf;
-    }
-
     // R_PA0 is 0
     if (rsc <= R_PF15) {
         // we assume the returned value is not stored anywhere
@@ -48,6 +42,12 @@ const char * rsc_get_name(Resource rsc)
         return gpionamebuf;
     }
 
+    if (rsc >= R_EXTI0 && rsc <= R_EXTI15) {
+        uint8_t index = rsc - R_EXTI0;
+        SNPRINTF(gpionamebuf, 8, "EXTI%d", index);
+        return gpionamebuf;
+    }
+
     return rsc_names[rsc - R_EXTI15 - 1];
 }
 
@@ -85,11 +85,12 @@ const char * rsc_get_owner_name(Resource rsc)
 
 void rsc_init_registry(void)
 {
-    for(uint32_t i = 0; i < RSCMAP_LEN; i++) {
-        UNIT_PLATFORM.resources[i] = global_rscmap[i] = 0xFF;
-    }
+    memset(UNIT_PLATFORM.resources, 0xFF, RSCMAP_LEN);
+    memset(global_rscmap, 0xFF, RSCMAP_LEN);
 
     rsc_initialized = true;
+
+    rsc_dbg("Total %d hw resources, bitmap has %d bytes.", RESOURCE_COUNT, RSCMAP_LEN);
 }
 
 

framework/rsc_enum.h

@@ -13,6 +13,7 @@
     X(I2C1) X(I2C2) X(I2C3) \
     X(ADC1) X(ADC2) X(ADC3) X(ADC4) \
     X(DAC1) X(DAC2) \
+    X(TSC) \
     X(USART1) X(USART2) X(USART3) X(USART4) X(USART5) X(USART6) \
     X(TIM1) X(TIM2) X(TIM3) X(TIM4) X(TIM5) \
     X(TIM6) X(TIM7) X(TIM8) X(TIM9) X(TIM10) X(TIM11) X(TIM12) X(TIM13) X(TIM14) \
@@ -24,7 +25,6 @@
 // X(I2S1) X(I2S2) X(I2S3)
 // X(OPAMP1) X(OPAMP2) X(OPAMP3) X(OPAMP4)
 // X(CAN1) X(CAN2)
-// X(TSC)
 // X(DCMI)
 // X(ETH)
 // X(FSMC)
@@ -59,8 +59,12 @@ typedef enum hw_resource Resource;
 /** Enum of all resources */
 enum hw_resource {
 #define X(res_name) R_##res_name,
+    // GPIO are at the beginning, because some units use the constants in their config to represent
+    // selected pins and those must not change with adding more stuff to the main list
     XX_RESOURCES_GPIO
+    // EXTIs (same like GPIOs) have dynamically generated labels to save rom space. Must be contiguous.
     XX_RESOURCES_EXTI
+    // All the rest ...
     XX_RESOURCES
 #undef X
     R_NONE,

freertos.c

@@ -147,7 +147,7 @@ void MX_FREERTOS_Init(void) {
   stackmon_register("Main", mainTaskStack, sizeof(mainTaskStack));
   stackmon_register("Job+Msg", msgJobQueTaskStack, sizeof(msgJobQueTaskStack));
   stackmon_register("Idle", xIdleStack, sizeof(xIdleStack));
-  stackmon_register("Timers", xTimersStack, sizeof(xTimersStack));
+//  stackmon_register("Timers", xTimersStack, sizeof(xTimersStack));
   /* USER CODE END Init */
 
   /* Create the mutex(es) */
@@ -169,7 +169,7 @@ void MX_FREERTOS_Init(void) {
 
   /* USER CODE BEGIN RTOS_SEMAPHORES */
   /* add semaphores, ... */
-  xSemaphoreGive(semVcomTxReadyHandle);
+  assert_param(pdTRUE == xSemaphoreGive(semVcomTxReadyHandle));
   /* USER CODE END RTOS_SEMAPHORES */
 
   /* USER CODE BEGIN RTOS_TIMERS */

gex.mk

@@ -16,6 +16,8 @@ GEX_SRC_DIR = \
     User/units/adc \
     User/units/sipo \
     User/units/fcap \
+    User/units/touch \
+    User/units/simple_pwm \
     User/TinyFrame \
     User/CWPack \
     User/tasks
@@ -95,7 +97,7 @@ GEX_CDEFS = $(GEX_CDEFS_BASE) \
     -DUSE_STACK_MONITOR=1 \
     -DUSE_DEBUG_UART=1 \
     -DDEBUG_MALLOC=0 \
-    -DDEBUG_RSC=1
+    -DDEBUG_RSC=0
 
 endif
 

gex_hooks.c

@@ -43,6 +43,18 @@ void GEX_PreInit(void)
     dbg("\r\n\033[37;1m*** GEX "GEX_VERSION" on "GEX_PLATFORM" ***\033[m");
     dbg("Build "__DATE__" "__TIME__);
 
+    PRINTF("Reset cause:");
+    if (LL_RCC_IsActiveFlag_LPWRRST()) PRINTF(" LPWR");
+    if (LL_RCC_IsActiveFlag_WWDGRST()) PRINTF(" WWDG");
+    if (LL_RCC_IsActiveFlag_IWDGRST()) PRINTF(" IWDG");
+    if (LL_RCC_IsActiveFlag_SFTRST()) PRINTF(" SFT");
+    if (LL_RCC_IsActiveFlag_PORRST()) PRINTF(" POR");
+    if (LL_RCC_IsActiveFlag_PINRST()) PRINTF(" PIN");
+    if (LL_RCC_IsActiveFlag_OBLRST()) PRINTF(" OBL");
+    if (LL_RCC_IsActiveFlag_V18PWRRST()) PRINTF(" V18PWR");
+    PUTNL();
+    LL_RCC_ClearResetFlags();
+
     plat_init();
 
     MX_USB_DEVICE_Init();

platform/hw_utils.c

@@ -3,7 +3,6 @@
 //
 
 #include "platform.h"
-#include "utils/avrlibc.h"
 #include "hw_utils.h"
 
 /** Convert pin number to LL bitfield */
@@ -131,6 +130,30 @@ error_t hw_configure_gpio_af(char port_name, uint8_t pin_num, uint32_t ll_af)
     return E_SUCCESS;
 }
 
+/** Configure a pin to alternate function */
+error_t hw_configure_gpiorsc_af(Resource rsc, uint32_t ll_af)
+{
+#if PLAT_NO_AFNUM
+    trap("Illegal call to hw_configure_gpio_af() on this platform");
+#else
+
+    bool suc = true;
+    GPIO_TypeDef *port;
+    uint32_t ll_pin;
+    suc = hw_pinrsc2ll(rsc, &port, &ll_pin);
+    if (!suc) return E_BAD_CONFIG;
+
+    if (ll_pin & 0xFF)
+        LL_GPIO_SetAFPin_0_7(port, ll_pin, ll_af);
+    else
+        LL_GPIO_SetAFPin_8_15(port, ll_pin, ll_af);
+
+    LL_GPIO_SetPinMode(port, ll_pin, LL_GPIO_MODE_ALTERNATE);
+
+#endif
+    return E_SUCCESS;
+}
+
 /** Configure pins using sparse map */
 error_t hw_configure_sparse_pins(char port_name, uint16_t mask, GPIO_TypeDef **port_dest,
                                  uint32_t ll_mode, uint32_t ll_otype)
@@ -288,6 +311,12 @@ void hw_periph_clock_enable(void *periph)
 #ifdef DAC2
     else if (periph == DAC2) __HAL_RCC_DAC2_CLK_ENABLE();
 #endif
+
+        // --- TSC ---
+#ifdef TSC
+    else if (periph == TSC) __HAL_RCC_TSC_CLK_ENABLE();
+#endif
+
     else {
         dbg("Periph 0x%p missing in hw clock enable func", periph);
         trap("BUG");
@@ -393,6 +422,12 @@ void hw_periph_clock_disable(void *periph)
 #ifdef DAC2
         else if (periph == DAC2) __HAL_RCC_DAC2_CLK_DISABLE();
 #endif
+
+        // --- TSC ---
+#ifdef TSC
+    else if (periph == TSC) __HAL_RCC_TSC_CLK_DISABLE();
+#endif
+
     else {
         dbg("Periph 0x%p missing in hw clock disable func", periph);
         trap("BUG");

platform/hw_utils.h

@@ -88,6 +88,9 @@ void hw_deinit_unit_pins(Unit *unit);
  */
 error_t hw_configure_gpio_af(char port_name, uint8_t pin_num, uint32_t ll_af) __attribute__((warn_unused_result));
 
+/** Configure a pin to alternate function via rsc */
+error_t hw_configure_gpiorsc_af(Resource rsc, uint32_t ll_af) __attribute__((warn_unused_result));
+
 /**
  * Configure multiple pins using the bitmap pattern
  *

platform/irq_dispatcher.c

@@ -69,6 +69,7 @@ static struct callbacks_ {
     struct cbslot tim16;
 
     struct cbslot adc1;
+    struct cbslot tsc;
 
     // XXX add more callbacks here when needed
 } callbacks;
@@ -92,7 +93,8 @@ void irqd_init(void)
     HAL_NVIC_SetPriority(EXTI2_3_IRQn, 2, 0);
     HAL_NVIC_SetPriority(EXTI4_15_IRQn, 2, 0);
 
-//    NVIC_EnableIRQ(TSC_IRQn);                   /*!< Touch Sensing Controller Interrupts                             */
+    NVIC_EnableIRQ(TSC_IRQn);                   /*!< Touch Sensing Controller Interrupts                             */
+    HAL_NVIC_SetPriority(TSC_IRQn, 2, 0);
 
     NVIC_EnableIRQ(DMA1_Channel1_IRQn);         /*!< DMA1 Channel 1 Interrupt                                        */
     NVIC_EnableIRQ(DMA1_Channel2_3_IRQn);       /*!< DMA1 Channel 2 and Channel 3 Interrupt                          */
@@ -178,6 +180,8 @@ static struct cbslot *get_slot_for_periph(void *periph)
     else if (periph == TIM16) slot = &callbacks.tim16;
     // 17 - used by timebase
 
+    else if (periph == TSC) slot = &callbacks.tsc;
+
     else if (periph == ADC1) slot = &callbacks.adc1;
 
     else if (periph >= EXTIS[0] && periph <= EXTIS[15]) {
@@ -352,6 +356,11 @@ void ADC1_COMP_IRQHandler(void)
     CALL_IRQ_HANDLER(callbacks.adc1);
 }
 
+void TSC_IRQHandler(void)
+{
+    CALL_IRQ_HANDLER(callbacks.tsc);
+}
+
 
 // other ISRs...
 

platform/plat_compat.h

@@ -21,7 +21,7 @@
 #endif
 
 // 180 is normally enough if not doing extensive debug logging
-#define TSK_STACK_MSG       200 // TF message handler task stack size (all unit commands run on this thread)
+#define TSK_STACK_MSG       260 // TF message handler task stack size (all unit commands run on this thread)
 #define TSK_STACK_IDLE    64 //configMINIMAL_STACK_SIZE
 #define TSK_STACK_TIMERS  64 //configTIMER_TASK_STACK_DEPTH
 

platform/plat_init.c

@@ -15,6 +15,7 @@
 #include "debug_uart.h"
 #include "irq_dispatcher.h"
 #include "timebase.h"
+#include "watchdog.h"
 
 void plat_init(void)
 {
@@ -39,4 +40,6 @@ void plat_init(void)
     settings_load(); // XXX maybe this should be moved to the main task
 
     comm_init();
+
+    wd_init();
 }

platform/platform.c

@@ -2,7 +2,6 @@
 // Created by MightyPork on 2017/11/26.
 //
 
-#include <units/fcap/unit_fcap.h>
 #include "platform.h"
 #include "usbd_core.h"
 #include "USB/usb_device.h"
@@ -19,6 +18,9 @@
 #include "units/usart/unit_usart.h"
 #include "units/spi/unit_spi.h"
 #include "units/sipo/unit_sipo.h"
+#include "units/fcap/unit_fcap.h"
+#include "units/touch/unit_touch.h"
+#include "units/simple_pwm/unit_pwmdim.h"
 #include "hw_utils.h"
 
 void plat_init_resources(void)
@@ -90,6 +92,8 @@ void plat_init_resources(void)
     ureg_add_type(&UNIT_ADC);
     ureg_add_type(&UNIT_SIPO);
     ureg_add_type(&UNIT_FCAP);
+    ureg_add_type(&UNIT_TOUCH);
+    ureg_add_type(&UNIT_PWMDIM);
 
     // Free all present resources
     {
@@ -98,7 +102,7 @@ void plat_init_resources(void)
 //        rsc_free_range(NULL, R_COMP1, R_COMP2);
         rsc_free(NULL, R_DAC1);
 //        rsc_free(NULL, R_HDMI_CEC);
-//        rsc_free(NULL, R_TSC);
+        rsc_free(NULL, R_TSC);
         rsc_free_range(NULL, R_I2C1, R_I2C2);
 //        rsc_free_range(NULL, R_I2S1, R_I2S2);
         rsc_free_range(NULL, R_SPI1, R_SPI2);
@@ -154,7 +158,7 @@ void plat_init_resources(void)
         rsc_free_range(NULL, R_TIM1, R_TIM4);
         rsc_free_range(NULL, R_TIM6, R_TIM8);
         rsc_free_range(NULL, R_TIM15, R_TIM17);
-//        rsc_free(NULL, R_TSC);
+        rsc_free(NULL, R_TSC);
         rsc_free_range(NULL, R_USART1, R_USART5);
 
         rsc_free_range(NULL, R_PA0, R_PA15);

platform/status_led.c

@@ -61,6 +61,12 @@ void Indicator_Effect(enum GEX_StatusIndicator indicator)
         led_on();
     }
 
+    // prevent the two disk ops interfering (happens in write-reload)
+    if (indicator == STATUS_DISK_BUSY && active_effect == STATUS_DISK_BUSY_SHORT) return;
+    if (indicator == STATUS_DISK_BUSY_SHORT && active_effect == STATUS_DISK_BUSY) return;
+
+    // TODO add some better protection against effect overlap?
+
     active_effect = indicator;
     effect_time = 0;
 }
@@ -119,7 +125,15 @@ void Indicator_Tick(void)
                 active_effect = STATUS_NONE;
             }
             else if (effect_time % 100 == 0) led_on();
-            else if (effect_time % 100 == 50) led_off();
+            else if (effect_time % 100 == 20) led_off();
+        }
+        else if (active_effect == STATUS_DISK_BUSY_SHORT) {
+            if (effect_time >= 200) {
+                led_off();
+                active_effect = STATUS_NONE;
+            }
+            else if (effect_time % 100 == 0) led_on();
+            else if (effect_time % 100 == 20) led_off();
         }
         else if (active_effect == STATUS_WELCOME) {
             if (effect_time == 0) led_on();

platform/status_led.h

@@ -16,6 +16,7 @@ enum GEX_StatusIndicator {
     STATUS_NONE = 0,
     STATUS_FAULT,
     STATUS_DISK_BUSY,
+    STATUS_DISK_BUSY_SHORT,
     STATUS_DISK_ATTACHED,
     STATUS_DISK_REMOVED,
     STATUS_WELCOME,

platform/watchdog.c

@@ -0,0 +1,57 @@
+//
+// Created by MightyPork on 2018/02/27.
+//
+
+#include "platform.h"
+#include "watchdog.h"
+
+static volatile uint16_t suspend_depth = 0;
+static volatile bool restart_pending = false;
+
+void wd_init(void)
+{
+    dbg("IWDG init, time 2s");
+
+    LL_IWDG_Enable(IWDG);
+    LL_IWDG_EnableWriteAccess(IWDG);
+    LL_IWDG_SetPrescaler(IWDG, LL_IWDG_PRESCALER_32); // 0.8 ms
+    LL_IWDG_SetReloadCounter(IWDG, 2500); // 2s.  max 4095
+    while (!LL_IWDG_IsReady(IWDG));
+
+    // reload
+    LL_IWDG_ReloadCounter(IWDG);
+}
+
+void wd_suspend(void)
+{
+    vPortEnterCritical();
+    if (suspend_depth < 0xFFFF) {
+        suspend_depth++;
+    }
+    vPortExitCritical();
+}
+
+void wd_resume(void)
+{
+    vPortEnterCritical();
+    if (suspend_depth > 0) {
+        suspend_depth--;
+
+        if (suspend_depth == 0 && restart_pending) {
+            restart_pending = false;
+            LL_IWDG_ReloadCounter(IWDG);
+        }
+    }
+    vPortExitCritical();
+}
+
+void wd_restart(void)
+{
+    vPortEnterCritical();
+    if (suspend_depth == 0) {
+        LL_IWDG_ReloadCounter(IWDG);
+    } else {
+        restart_pending = true;
+    }
+    vPortExitCritical();
+}

platform/watchdog.h

@@ -0,0 +1,32 @@
+//
+// Created by MightyPork on 2018/02/27.
+//
+
+#ifndef GEX_F072_WATCHDOG_H
+#define GEX_F072_WATCHDOG_H
+
+/**
+ * Initialize the application watchdog
+ */
+void wd_init(void);
+
+/**
+ * Suspend watchdog restarts until resumed
+ * (used in other tasks to prevent the main task clearing the wd if the other task is locked up)
+ *
+ * The suspend/resume calls can be stacked.
+ */
+void wd_suspend(void);
+
+/**
+ * Resume restarts
+ */
+void wd_resume(void);
+
+/**
+ * Restart the wd. If restarts are suspended, postpone the restart until resumed
+ * and then restart immediately.
+ */
+void wd_restart(void);
+
+#endif //GEX_F072_WATCHDOG_H

tasks/task_main.c

@@ -4,6 +4,7 @@
 
 #include "platform.h"
 #include "platform/lock_jumper.h"
+#include "platform/watchdog.h"
 #include "status_led.h"
 #include "utils/stacksmon.h"
 #include "vfs/vfs_manager.h"
@@ -45,6 +46,8 @@ void TaskMain(void const * argument)
 
             cnt++;
             Indicator_Heartbeat();
+
+            wd_restart();
         }
 
         // if no message and it just timed out, go wait some more...

tasks/task_msg.c

@@ -3,6 +3,7 @@
 //
 
 #include "platform.h"
+#include "platform/watchdog.h"
 #include "comm/messages.h"
 #include "task_msg.h"
 
@@ -85,7 +86,9 @@ void TaskMsgJob(const void *argument)
             #if CDC_LOOPBACK_TEST
                 TF_WriteImpl(comm, slot.msg.data, slot.msg.len);
             #else
+                wd_suspend();
                 TF_Accept(comm, slot.msg.data, slot.msg.len);
+                wd_resume();
             #endif
         }
 

units/1wire/_ow_init.c

@@ -14,15 +14,6 @@ error_t OW_preInit(Unit *unit)
     struct priv *priv = unit->data = calloc_ck(1, sizeof(struct priv));
     if (priv == NULL) return E_OUT_OF_MEM;
 
-    // the timer is not started until needed
-    priv->busyWaitTimer = xTimerCreate("1w_tim", // name
-                                       750,      // interval (will be changed when starting it)
-                                       true,     // periodic (we use this only for the polling variant, the one-shot will stop the timer in the CB)
-                                       unit,     // user data
-                                       OW_TimerCb); // callback
-
-    if (priv->busyWaitTimer == NULL) return E_OUT_OF_MEM;
-
     // some defaults
     priv->pin_number = 0;
     priv->port_name = 'A';
@@ -63,9 +54,6 @@ void OW_deInit(Unit *unit)
     // Release all resources
     rsc_teardown(unit);
 
-    // Delete the software timer
-    assert_param(pdPASS == xTimerDelete(priv->busyWaitTimer, 1000));
-
     // Free memory
     free_ck(unit->data);
 }

units/1wire/_ow_settings.c

@@ -64,5 +64,5 @@ void OW_writeIni(Unit *unit, IniWriter *iw)
     iw_entry(iw, "pin", "%c%d", priv->port_name,  priv->pin_number);
 
     iw_comment(iw, "Parasitic (bus-powered) mode");
-    iw_entry(iw, "parasitic", str_yn(priv->parasitic));
+    iw_entry_s(iw, "parasitic", str_yn(priv->parasitic));
 }

units/1wire/unit_1wire.c

@@ -38,12 +38,13 @@ static void OW_TimerRespCb(Job *job)
  *
  * @param xTimer
  */
-void OW_TimerCb(TimerHandle_t xTimer)
+void OW_tickHandler(Unit *unit)
 {
-    Unit *unit = pvTimerGetTimerID(xTimer);
-    assert_param(unit);
     struct priv *priv = unit->data;
-    assert_param(priv->busy);
+    if(!priv->busy) {
+        dbg("ow tick should be disabled now!");
+        return;
+    }
 
     if (priv->parasitic) {
         // this is the end of the 750ms measurement time
@@ -56,7 +57,8 @@ void OW_TimerCb(TimerHandle_t xTimer)
 
         uint32_t time = PTIM_GetTime();
         if (time - priv->busyStart > 1000) {
-            xTimerStop(xTimer, 100);
+            unit->tick_interval = 0;
+            unit->_tick_cnt = 0;
 
             Job j = {
                 .unit = unit,
@@ -69,7 +71,8 @@ void OW_TimerCb(TimerHandle_t xTimer)
 
     return;
 halt_ok:
-    xTimerStop(xTimer, 100);
+    unit->tick_interval = 0;
+    unit->_tick_cnt = 0;
 
     Job j = {
         .unit = unit,
@@ -79,7 +82,6 @@ halt_ok:
     scheduleJob(&j);
 }
 
-
 enum PinCmd_ {
     CMD_CHECK_PRESENCE = 0, // simply tests that any devices are attached
     CMD_SEARCH_ADDR = 1,    // perform a scan of the bus, retrieving all found device ROMs
@@ -120,13 +122,13 @@ static error_t OW_handleRequest(Unit *unit, TF_ID frame_id, uint8_t command, Pay
          */
         case CMD_POLL_FOR_1:
             // This can't be exposed via the UU API, due to being async
+            unit->_tick_cnt = 0;
+            unit->tick_interval = 750;
             if (priv->parasitic) {
-                assert_param(pdPASS == xTimerChangePeriod(priv->busyWaitTimer, 750, 100));
+                unit->tick_interval = 750;
             } else {
-                // every 10 ticks
-                assert_param(pdPASS == xTimerChangePeriod(priv->busyWaitTimer, 10, 100));
+                unit->tick_interval = 10;
             }
-            assert_param(pdPASS == xTimerStart(priv->busyWaitTimer, 100));
             priv->busy = true;
             priv->busyStart = PTIM_GetTime();
             priv->busyRequestId = frame_id;
@@ -242,4 +244,5 @@ const UnitDriver UNIT_1WIRE = {
     .deInit = OW_deInit,
     // Function
     .handleRequest = OW_handleRequest,
+    .updateTick = OW_tickHandler,
 };

units/adc/_adc_settings.c

@@ -80,14 +80,14 @@ void UADC_writeIni(Unit *unit, IniWriter *iw)
     iw_comment(iw, "Enabled channels, comma separated");
     iw_comment(iw, " 0  1  2  3  4  5  6  7    8  9   10 11 12 13 14 15   16    17");
     iw_comment(iw, "A0 A1 A2 A3 A4 A5 A6 A7   B0 B1   C0 C1 C2 C3 C4 C5   Tsens Vref");
-    iw_entry(iw, "channels", cfg_pinmask_encode(priv->cfg.channels, unit_tmp512, true));
+    iw_entry_s(iw, "channels", cfg_pinmask_encode(priv->cfg.channels, unit_tmp512, true));
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Sampling time (0-7)");
-    iw_entry(iw, "sample_time", "%d", (int)priv->cfg.sample_time);
+    iw_entry_d(iw, "sample_time", priv->cfg.sample_time);
 
     iw_comment(iw, "Sampling frequency (Hz)");
-    iw_entry(iw, "frequency", "%d", (int)priv->cfg.frequency);
+    iw_entry_d(iw, "frequency", priv->cfg.frequency);
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Sample buffer size");
@@ -95,12 +95,12 @@ void UADC_writeIni(Unit *unit, IniWriter *iw)
     iw_comment(iw, "- defines the maximum pre-trigger size (divide by # of channels)");
     iw_comment(iw, "- captured data is sent in half-buffer chunks");
     iw_comment(iw, "- buffer overrun aborts the data capture");
-    iw_entry(iw, "buffer_size", "%d", (int)priv->cfg.buffer_size);
+    iw_entry_d(iw, "buffer_size", priv->cfg.buffer_size);
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Exponential averaging coefficient (permil, range 0-1000 ~ 0.000-1.000)");
     iw_comment(iw, "- used formula: y[t]=(1-k)*y[t-1]+k*u[t]");
     iw_comment(iw, "- not available when a capture is running");
-    iw_entry(iw, "avg_factor", "%d", priv->cfg.averaging_factor);
+    iw_entry_d(iw, "avg_factor", priv->cfg.averaging_factor);
 }
 

units/digital_in/_din_settings.c

@@ -92,24 +92,24 @@ void DIn_writeIni(Unit *unit, IniWriter *iw)
     iw_entry(iw, "port", "%c", priv->port_name);
 
     iw_comment(iw, "Pins (comma separated, supports ranges)");
-    iw_entry(iw, "pins", cfg_pinmask_encode(priv->pins, unit_tmp512, 0));
+    iw_entry_s(iw, "pins", cfg_pinmask_encode(priv->pins, unit_tmp512, 0));
 
     iw_comment(iw, "Pins with pull-up");
-    iw_entry(iw, "pull-up", cfg_pinmask_encode(priv->pullup, unit_tmp512, 0));
+    iw_entry_s(iw, "pull-up", cfg_pinmask_encode(priv->pullup, unit_tmp512, 0));
 
     iw_comment(iw, "Pins with pull-down");
-    iw_entry(iw, "pull-down", cfg_pinmask_encode(priv->pulldown, unit_tmp512, 0));
+    iw_entry_s(iw, "pull-down", cfg_pinmask_encode(priv->pulldown, unit_tmp512, 0));
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Trigger pins activated by rising/falling edge");
-    iw_entry(iw, "trig-rise", cfg_pinmask_encode(priv->trig_rise, unit_tmp512, 0));
-    iw_entry(iw, "trig-fall", cfg_pinmask_encode(priv->trig_fall, unit_tmp512, 0));
+    iw_entry_s(iw, "trig-rise", cfg_pinmask_encode(priv->trig_rise, unit_tmp512, 0));
+    iw_entry_s(iw, "trig-fall", cfg_pinmask_encode(priv->trig_fall, unit_tmp512, 0));
 
     iw_comment(iw, "Trigger pins auto-armed by default");
-    iw_entry(iw, "auto-trigger", cfg_pinmask_encode(priv->def_auto, unit_tmp512, 0));
+    iw_entry_s(iw, "auto-trigger", cfg_pinmask_encode(priv->def_auto, unit_tmp512, 0));
 
     iw_comment(iw, "Triggers hold-off time (ms)");
-    iw_entry(iw, "hold-off", "%d", (int)priv->trig_holdoff);
+    iw_entry_d(iw, "hold-off", priv->trig_holdoff);
 
 #if PLAT_NO_FLOATING_INPUTS
     iw_comment(iw, "NOTE: Pins use pull-up by default.\r\n");

units/digital_out/_dout_settings.c

@@ -72,11 +72,11 @@ void DOut_writeIni(Unit *unit, IniWriter *iw)
     iw_entry(iw, "port", "%c", priv->port_name);
 
     iw_comment(iw, "Pins (comma separated, supports ranges)");
-    iw_entry(iw, "pins", cfg_pinmask_encode(priv->pins, unit_tmp512, 0));
+    iw_entry_s(iw, "pins", cfg_pinmask_encode(priv->pins, unit_tmp512, 0));
 
     iw_comment(iw, "Initially high pins");
-    iw_entry(iw, "initial", cfg_pinmask_encode(priv->initial, unit_tmp512, 0));
+    iw_entry_s(iw, "initial", cfg_pinmask_encode(priv->initial, unit_tmp512, 0));
 
     iw_comment(iw, "Open-drain pins");
-    iw_entry(iw, "open-drain", cfg_pinmask_encode(priv->open_drain, unit_tmp512, 0));
+    iw_entry_s(iw, "open-drain", cfg_pinmask_encode(priv->open_drain, unit_tmp512, 0));
 }

units/fcap/_fcap_settings.c

@@ -92,20 +92,20 @@ void UFCAP_writeIni(Unit *unit, IniWriter *iw)
     iw_cmt_newline(iw);
 
     iw_comment(iw, "Active level or edge (0-low,falling; 1-high,rising)");
-    iw_entry(iw, "active-level", "%d", (int)priv->conf.active_level);
+    iw_entry_d(iw, "active-level", priv->conf.active_level);
 
     iw_comment(iw, "Input filtering (0-15)");
-    iw_entry(iw, "input-filter", "%d", (int)priv->conf.dfilter);
+    iw_entry_d(iw, "input-filter", priv->conf.dfilter);
 
     iw_comment(iw, "Pulse counter pre-divider (1,2,4,8)");
-    iw_entry(iw, "direct-presc", "%d", (int)priv->conf.direct_presc);
+    iw_entry_d(iw, "direct-presc", priv->conf.direct_presc);
 
     iw_comment(iw, "Pulse counting interval (ms)");
-    iw_entry(iw, "direct-time", "%d", (int)priv->conf.direct_msec);
+    iw_entry_d(iw, "direct-time", priv->conf.direct_msec);
     iw_cmt_newline(iw);
 
     iw_comment(iw, "Mode on startup: N-none, I-indirect, D-direct, F-free count");
-    iw_entry(iw, "initial-mode", cfg_enum4_encode(priv->conf.startmode,
+    iw_entry_s(iw, "initial-mode", cfg_enum4_encode(priv->conf.startmode,
                                                   OPMODE_IDLE, "N",
                                                   OPMODE_INDIRECT_CONT, "I",
                                                   OPMODE_DIRECT_CONT, "D",

units/i2c/_i2c_settings.c

@@ -74,7 +74,7 @@ void UI2C_writeIni(Unit *unit, IniWriter *iw)
     struct priv *priv = unit->data;
 
     iw_comment(iw, "Peripheral number (I2Cx)");
-    iw_entry(iw, "device", "%d", (int)priv->periph_num);
+    iw_entry_d(iw, "device", priv->periph_num);
 
     iw_comment(iw, "Pin mappings (SCL,SDA)");
 #if GEX_PLAT_F072_DISCOVERY
@@ -89,15 +89,15 @@ void UI2C_writeIni(Unit *unit, IniWriter *iw)
 #else
     #error "BAD PLATFORM!"
 #endif
-    iw_entry(iw, "remap", "%d", (int)priv->remap);
+    iw_entry_d(iw, "remap", priv->remap);
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Speed: 1-Standard, 2-Fast, 3-Fast+");
-    iw_entry(iw, "speed", "%d", (int)priv->speed);
+    iw_entry_d(iw, "speed", priv->speed);
 
     iw_comment(iw, "Analog noise filter enable (Y,N)");
-    iw_entry(iw, "analog-filter", str_yn(priv->anf));
+    iw_entry_s(iw, "analog-filter", str_yn(priv->anf));
 
     iw_comment(iw, "Digital noise filter bandwidth (0-15)");
-    iw_entry(iw, "digital-filter", "%d", (int)priv->dnf);
+    iw_entry_d(iw, "digital-filter", priv->dnf);
 }

units/neopixel/_npx_settings.c

@@ -54,8 +54,8 @@ void Npx_writeIni(Unit *unit, IniWriter *iw)
     struct priv *priv = unit->data;
 
     iw_comment(iw, "Data pin");
-    iw_entry(iw, "pin", cfg_pinrsc_encode(priv->cfg.pin));
+    iw_entry_s(iw, "pin", cfg_pinrsc_encode(priv->cfg.pin));
 
     iw_comment(iw, "Number of pixels");
-    iw_entry(iw, "pixels", "%d", priv->cfg.pixels);
+    iw_entry_d(iw, "pixels", priv->cfg.pixels);
 }

units/simple_pwm/_pwmdim_api.c

@@ -0,0 +1,64 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+#include "unit_pwmdim.h"
+
+#define PWMDIM_INTERNAL
+#include "_pwmdim_internal.h"
+
+error_t UPWMDIM_SetFreq(Unit *unit, uint32_t freq)
+{
+    struct priv *priv = unit->data;
+
+    uint16_t presc;
+    uint32_t count;
+    float real_freq;
+    if (!hw_solve_timer(PLAT_APB1_HZ, freq, true, &presc, &count, &real_freq)) {
+        dbg("Failed to resolve timer params.");
+        return E_BAD_VALUE;
+    }
+    LL_TIM_SetPrescaler(priv->TIMx, (uint32_t) (presc - 1));
+    LL_TIM_SetAutoReload(priv->TIMx, count - 1);
+
+    // we must re-calculate duty cycles because they are absolute related to the ARR which we just changed
+    UPWMDIM_SetDuty(unit, 0, priv->duty1);
+    UPWMDIM_SetDuty(unit, 1, priv->duty2);
+    UPWMDIM_SetDuty(unit, 2, priv->duty3);
+    UPWMDIM_SetDuty(unit, 3, priv->duty4);
+
+//    LL_TIM_GenerateEvent_UPDATE(priv->TIMx); // - this appears to cause jumpiness
+    priv->freq = freq;
+
+    return E_SUCCESS;
+}
+
+error_t UPWMDIM_SetDuty(Unit *unit, uint8_t ch, uint16_t duty1000)
+{
+    struct priv *priv = unit->data;
+
+    uint32_t cnt = (LL_TIM_GetAutoReload(priv->TIMx) + 1)*duty1000 / 1000;
+
+    if (ch == 0) {
+        priv->duty1 = duty1000;
+        LL_TIM_OC_SetCompareCH1(priv->TIMx, cnt);
+    }
+    else if (ch == 1) {
+        priv->duty2 = duty1000;
+        LL_TIM_OC_SetCompareCH2(priv->TIMx, cnt);
+    }
+    else if (ch == 2) {
+        priv->duty3 = duty1000;
+        LL_TIM_OC_SetCompareCH3(priv->TIMx, cnt);
+    }
+    else if (ch == 3) {
+        priv->duty4 = duty1000;
+        LL_TIM_OC_SetCompareCH4(priv->TIMx, cnt);
+    } else {
+        return E_BAD_VALUE;
+    }
+
+    return E_SUCCESS;
+}

units/simple_pwm/_pwmdim_init.c

@@ -0,0 +1,170 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+
+#define PWMDIM_INTERNAL
+#include "_pwmdim_internal.h"
+
+/** Allocate data structure and set defaults */
+error_t UPWMDIM_preInit(Unit *unit)
+{
+    struct priv *priv = unit->data = calloc_ck(1, sizeof(struct priv));
+    if (priv == NULL) return E_OUT_OF_MEM;
+
+    priv->cfg.freq = 1000;
+    priv->cfg.ch1_choice = 1;
+    priv->cfg.ch2_choice = 0;
+    priv->cfg.ch3_choice = 0;
+    priv->cfg.ch4_choice = 0;
+
+    priv->duty1 = 500;
+    priv->duty2 = 500;
+    priv->duty3 = 500;
+    priv->duty4 = 500;
+
+    return E_SUCCESS;
+}
+
+/** Finalize unit set-up */
+error_t UPWMDIM_init(Unit *unit)
+{
+    bool suc = true;
+    struct priv *priv = unit->data;
+
+    TRY(rsc_claim(unit, R_TIM3));
+    priv->TIMx = TIM3;
+    hw_periph_clock_enable(priv->TIMx);
+
+    // copy the default frequency
+    priv->freq = priv->cfg.freq;
+
+    const Resource ch1_pins[] = { R_PA6, R_PB4, R_PC6 };
+    const uint32_t ch1_af[]   = { LL_GPIO_AF_1, LL_GPIO_AF_1, LL_GPIO_AF_0 };
+
+    const Resource ch2_pins[] = { R_PA7, R_PB5, R_PC7 };
+    const uint32_t ch2_af[]   = { LL_GPIO_AF_1, LL_GPIO_AF_1, LL_GPIO_AF_0 };
+
+    const Resource ch3_pins[] = { R_PB0, R_PC8 };
+    const uint32_t ch3_af[]   = { LL_GPIO_AF_1, LL_GPIO_AF_0 };
+
+    const Resource ch4_pins[] = { R_PB1, R_PC9 };
+    const uint32_t ch4_af[]   = { LL_GPIO_AF_1, LL_GPIO_AF_0 };
+
+    Resource r[4] = {};
+    uint32_t af[4] = {};
+
+    // --- resolve pins and AFs ---
+    if (priv->cfg.ch1_choice > 0) {
+        if (priv->cfg.ch1_choice > 3) return E_BAD_CONFIG;
+        r[0] = ch1_pins[priv->cfg.ch1_choice - 1];
+        af[0] = ch1_af[priv->cfg.ch1_choice - 1];
+        TRY(rsc_claim(unit, r[0]));
+    }
+
+    if (priv->cfg.ch2_choice > 0) {
+        if (priv->cfg.ch2_choice > 3) return E_BAD_CONFIG;
+        r[1] = ch2_pins[priv->cfg.ch2_choice - 1];
+        af[1] = ch2_af[priv->cfg.ch2_choice - 1];
+        TRY(rsc_claim(unit, r[1]));
+    }
+
+    if (priv->cfg.ch3_choice > 0) {
+        if (priv->cfg.ch3_choice > 2) return E_BAD_CONFIG;
+        r[2] = ch3_pins[priv->cfg.ch3_choice - 1];
+        af[2] = ch3_af[priv->cfg.ch3_choice - 1];
+        TRY(rsc_claim(unit, r[2]));
+    }
+
+    if (priv->cfg.ch4_choice > 0) {
+        if (priv->cfg.ch4_choice > 2) return E_BAD_CONFIG;
+        r[3] = ch4_pins[priv->cfg.ch4_choice - 1];
+        af[3] = ch4_af[priv->cfg.ch4_choice - 1];
+        TRY(rsc_claim(unit, r[3]));
+    }
+
+    // --- configure AF + timer ---
+    LL_TIM_DeInit(priv->TIMx); // force a reset
+
+    uint16_t presc;
+    uint32_t count;
+    float real_freq;
+    if (!hw_solve_timer(PLAT_APB1_HZ, priv->freq, true, &presc, &count, &real_freq)) {
+        dbg("Failed to resolve timer params.");
+        return E_BAD_VALUE;
+    }
+    LL_TIM_SetPrescaler(priv->TIMx, (uint32_t) (presc - 1));
+    LL_TIM_SetAutoReload(priv->TIMx, count - 1);
+    LL_TIM_EnableARRPreload(priv->TIMx);
+
+    dbg("Presc %d, cnt %d", (int)presc, (int)count);
+
+    // TODO this can probably be turned into a loop over an array of structs
+
+
+    if (priv->cfg.ch1_choice > 0) {
+        TRY(hw_configure_gpiorsc_af(r[0], af[0]));
+
+        LL_TIM_OC_EnablePreload(priv->TIMx, LL_TIM_CHANNEL_CH1);
+        LL_TIM_OC_SetMode(priv->TIMx, LL_TIM_CHANNEL_CH1, LL_TIM_OCMODE_PWM1);
+        LL_TIM_OC_SetCompareCH1(priv->TIMx, count/2);
+        LL_TIM_CC_EnablePreload(priv->TIMx);
+        LL_TIM_CC_EnableChannel(priv->TIMx, LL_TIM_CHANNEL_CH1);
+    }
+
+    if (priv->cfg.ch2_choice > 0) {
+        TRY(hw_configure_gpiorsc_af(r[1], af[1]));
+
+        LL_TIM_OC_EnablePreload(priv->TIMx, LL_TIM_CHANNEL_CH2);
+        LL_TIM_OC_SetMode(priv->TIMx, LL_TIM_CHANNEL_CH2, LL_TIM_OCMODE_PWM1);
+        LL_TIM_OC_SetCompareCH2(priv->TIMx, count/2);
+        LL_TIM_CC_EnableChannel(priv->TIMx, LL_TIM_CHANNEL_CH2);
+    }
+
+    if (priv->cfg.ch3_choice > 0) {
+        TRY(hw_configure_gpiorsc_af(r[2], af[2]));
+
+        LL_TIM_OC_EnablePreload(priv->TIMx, LL_TIM_CHANNEL_CH3);
+        LL_TIM_OC_SetMode(priv->TIMx, LL_TIM_CHANNEL_CH3, LL_TIM_OCMODE_PWM1);
+        LL_TIM_OC_SetCompareCH3(priv->TIMx, count/2);
+        LL_TIM_CC_EnableChannel(priv->TIMx, LL_TIM_CHANNEL_CH3);
+    }
+
+    if (priv->cfg.ch4_choice > 0) {
+        TRY(hw_configure_gpiorsc_af(r[3], af[3]));
+
+        LL_TIM_OC_EnablePreload(priv->TIMx, LL_TIM_CHANNEL_CH4);
+        LL_TIM_OC_SetMode(priv->TIMx, LL_TIM_CHANNEL_CH4, LL_TIM_OCMODE_PWM1);
+        LL_TIM_OC_SetCompareCH4(priv->TIMx, count/2);
+        LL_TIM_CC_EnableChannel(priv->TIMx, LL_TIM_CHANNEL_CH4);
+    }
+
+    LL_TIM_GenerateEvent_UPDATE(priv->TIMx);
+    LL_TIM_EnableAllOutputs(priv->TIMx);
+
+    // postpone this for later - when user uses the start command.
+    // prevents beeping right after restart if used for audio.
+//    LL_TIM_EnableCounter(priv->TIMx);
+
+    return E_SUCCESS;
+}
+
+
+/** Tear down the unit */
+void UPWMDIM_deInit(Unit *unit)
+{
+    struct priv *priv = unit->data;
+
+    // de-init peripherals
+    if (unit->status == E_SUCCESS ) {
+        LL_TIM_DeInit(priv->TIMx);
+    }
+
+    // Release all resources, deinit pins
+    rsc_teardown(unit);
+
+    // Free memory
+    free_ck(unit->data);
+}

units/simple_pwm/_pwmdim_internal.h

@@ -0,0 +1,65 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#ifndef GEX_F072_PWMDIM_INTERNAL_H
+#define GEX_F072_PWMDIM_INTERNAL_H
+
+#ifndef PWMDIM_INTERNAL
+#error bad include!
+#endif
+
+#include "unit_base.h"
+
+/** Private data structure */
+struct priv {
+    // settings
+    struct {
+        uint32_t freq;
+        uint8_t ch1_choice;
+        uint8_t ch2_choice;
+        uint8_t ch3_choice;
+        uint8_t ch4_choice;
+    } cfg;
+
+    // internal state
+    uint32_t freq;
+    uint16_t duty1;
+    uint16_t duty2;
+    uint16_t duty3;
+    uint16_t duty4;
+
+    TIM_TypeDef *TIMx;
+};
+
+/** Allocate data structure and set defaults */
+error_t UPWMDIM_preInit(Unit *unit);
+
+/** Load from a binary buffer stored in Flash */
+void UPWMDIM_loadBinary(Unit *unit, PayloadParser *pp);
+
+/** Write to a binary buffer for storing in Flash */
+void UPWMDIM_writeBinary(Unit *unit, PayloadBuilder *pb);
+
+// ------------------------------------------------------------------------
+
+/** Parse a key-value pair from the INI file */
+error_t UPWMDIM_loadIni(Unit *unit, const char *key, const char *value);
+
+/** Generate INI file section for the unit */
+void UPWMDIM_writeIni(Unit *unit, IniWriter *iw);
+
+// ------------------------------------------------------------------------
+
+/** Finalize unit set-up */
+error_t UPWMDIM_init(Unit *unit);
+
+/** Tear down the unit */
+void UPWMDIM_deInit(Unit *unit);
+
+
+error_t UPWMDIM_SetFreq(Unit *unit, uint32_t freq);
+
+error_t UPWMDIM_SetDuty(Unit *unit, uint8_t ch, uint16_t duty1000);
+
+#endif //GEX_F072_PWMDIM_INTERNAL_H

units/simple_pwm/_pwmdim_settings.c

@@ -0,0 +1,89 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+
+#define PWMDIM_INTERNAL
+#include "_pwmdim_internal.h"
+
+/** Load from a binary buffer stored in Flash */
+void UPWMDIM_loadBinary(Unit *unit, PayloadParser *pp)
+{
+    struct priv *priv = unit->data;
+
+    uint8_t version = pp_u8(pp);
+    (void)version;
+
+    priv->cfg.freq = pp_u32(pp);
+    priv->cfg.ch1_choice = pp_u8(pp);
+    priv->cfg.ch2_choice = pp_u8(pp);
+    priv->cfg.ch3_choice = pp_u8(pp);
+    priv->cfg.ch4_choice = pp_u8(pp);
+}
+
+/** Write to a binary buffer for storing in Flash */
+void UPWMDIM_writeBinary(Unit *unit, PayloadBuilder *pb)
+{
+    struct priv *priv = unit->data;
+
+    pb_u8(pb, 0); // version
+
+    pb_u32(pb, priv->cfg.freq);
+    pb_u8(pb, priv->cfg.ch1_choice);
+    pb_u8(pb, priv->cfg.ch2_choice);
+    pb_u8(pb, priv->cfg.ch3_choice);
+    pb_u8(pb, priv->cfg.ch4_choice);
+}
+
+// ------------------------------------------------------------------------
+
+/** Parse a key-value pair from the INI file */
+error_t UPWMDIM_loadIni(Unit *unit, const char *key, const char *value)
+{
+    bool suc = true;
+    struct priv *priv = unit->data;
+
+    if (streq(key, "frequency")) {
+        priv->cfg.freq = cfg_u32_parse(value, &suc);
+    }
+    else if (streq(key, "ch1_pin")) {
+        priv->cfg.ch1_choice = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "ch2_pin")) {
+        priv->cfg.ch2_choice = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "ch3_pin")) {
+        priv->cfg.ch3_choice = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "ch4_pin")) {
+        priv->cfg.ch4_choice = cfg_u8_parse(value, &suc);
+    }
+    else {
+        return E_BAD_KEY;
+    }
+
+    if (!suc) return E_BAD_VALUE;
+    return E_SUCCESS;
+}
+
+/** Generate INI file section for the unit */
+void UPWMDIM_writeIni(Unit *unit, IniWriter *iw)
+{
+    struct priv *priv = unit->data;
+
+    iw_comment(iw, "Default pulse frequency (Hz)");
+    iw_entry_d(iw, "frequency", priv->cfg.freq);
+
+    iw_comment(iw, "Pin mapping - 0=disabled");
+    iw_comment(iw, "Channel1 - 1:PA6, 2:PB4, 3:PC6");
+    iw_entry_d(iw, "ch1_pin", priv->cfg.ch1_choice);
+    iw_comment(iw, "Channel2 - 1:PA7, 2:PB5, 3:PC7");
+    iw_entry_d(iw, "ch2_pin", priv->cfg.ch2_choice);
+    iw_comment(iw, "Channel3 - 1:PB0, 2:PC8");
+    iw_entry_d(iw, "ch3_pin", priv->cfg.ch3_choice);
+    iw_comment(iw, "Channel4 - 1:PB1, 2:PC9");
+    iw_entry_d(iw, "ch4_pin", priv->cfg.ch4_choice);
+}
+

units/simple_pwm/unit_pwmdim.c

@@ -0,0 +1,69 @@
+//
+// Created by MightyPork on 2017/11/25.
+//
+
+#include "unit_base.h"
+#include "unit_pwmdim.h"
+
+#define PWMDIM_INTERNAL
+#include "_pwmdim_internal.h"
+
+// ------------------------------------------------------------------------
+
+enum PwmSimpleCmd_ {
+    CMD_SET_FREQUENCY = 0,
+    CMD_SET_DUTY = 1,
+    CMD_STOP = 2,
+    CMD_START = 3,
+};
+
+/** Handle a request message */
+static error_t UPWMDIM_handleRequest(Unit *unit, TF_ID frame_id, uint8_t command, PayloadParser *pp)
+{
+    struct priv *priv = unit->data;
+
+    switch (command) {
+        case CMD_SET_FREQUENCY:
+            TRY(UPWMDIM_SetFreq(unit, pp_u32(pp)));
+            return E_SUCCESS;
+
+        case CMD_SET_DUTY:
+            for (; pp_length(pp) > 0;) {
+                uint8_t ch = pp_u8(pp);
+                uint16_t duty = pp_u16(pp);
+                TRY(UPWMDIM_SetDuty(unit, ch, duty));
+            }
+            return E_SUCCESS;
+
+        case CMD_STOP:
+            LL_TIM_DisableCounter(priv->TIMx);
+            LL_TIM_SetCounter(priv->TIMx, 0);
+            return E_SUCCESS;
+
+        case CMD_START:
+            LL_TIM_EnableCounter(priv->TIMx);
+            return E_SUCCESS;
+
+        default:
+            return E_UNKNOWN_COMMAND;
+    }
+}
+
+// ------------------------------------------------------------------------
+
+/** Simple PWM dimming output */
+const UnitDriver UNIT_PWMDIM = {
+    .name = "PWMDIM",
+    .description = "Simple PWM output",
+    // Settings
+    .preInit = UPWMDIM_preInit,
+    .cfgLoadBinary = UPWMDIM_loadBinary,
+    .cfgWriteBinary = UPWMDIM_writeBinary,
+    .cfgLoadIni = UPWMDIM_loadIni,
+    .cfgWriteIni = UPWMDIM_writeIni,
+    // Init
+    .init = UPWMDIM_init,
+    .deInit = UPWMDIM_deInit,
+    // Function
+    .handleRequest = UPWMDIM_handleRequest,
+};

units/simple_pwm/unit_pwmdim.h

@@ -0,0 +1,16 @@
+//
+// Created by MightyPork on 2017/11/25.
+//
+// Digital input unit; single or multiple pin read access on one port (A-F)
+//
+
+#ifndef U_PWMDIM_H
+#define U_PWMDIM_H
+
+#include "unit.h"
+
+extern const UnitDriver UNIT_PWMDIM;
+
+// UU_ prototypes
+
+#endif //U_PWMDIM_H

units/sipo/_sipo_settings.c

@@ -98,19 +98,19 @@ void USIPO_writeIni(Unit *unit, IniWriter *iw)
     struct priv *priv = unit->data;
 
     iw_comment(iw, "Shift pin & its active edge (1-rising,0-falling)");
-    iw_entry(iw, "shift-pin", cfg_pinrsc_encode(priv->cfg.pin_shift));
-    iw_entry(iw, "shift-pol", "%d", priv->cfg.shift_pol);
+    iw_entry_s(iw, "shift-pin", cfg_pinrsc_encode(priv->cfg.pin_shift));
+    iw_entry_d(iw, "shift-pol", priv->cfg.shift_pol);
 
     iw_comment(iw, "Store pin & its active edge");
-    iw_entry(iw, "store-pin", cfg_pinrsc_encode(priv->cfg.pin_store));
-    iw_entry(iw, "store-pol", "%d", priv->cfg.store_pol);
+    iw_entry_s(iw, "store-pin", cfg_pinrsc_encode(priv->cfg.pin_store));
+    iw_entry_d(iw, "store-pol", priv->cfg.store_pol);
 
     iw_comment(iw, "Clear pin & its active level");
-    iw_entry(iw, "clear-pin", cfg_pinrsc_encode(priv->cfg.pin_clear));
-    iw_entry(iw, "clear-pol", "%d", priv->cfg.clear_pol);
+    iw_entry_s(iw, "clear-pin", cfg_pinrsc_encode(priv->cfg.pin_clear));
+    iw_entry_d(iw, "clear-pol", priv->cfg.clear_pol);
 
     iw_comment(iw, "Data port and pins");
     iw_entry(iw, "data-port", "%c", priv->cfg.data_pname);
-    iw_entry(iw, "data-pins", cfg_pinmask_encode(priv->cfg.data_pins, unit_tmp512, true));
+    iw_entry_s(iw, "data-pins", cfg_pinmask_encode(priv->cfg.data_pins, unit_tmp512, true));
 }
 

units/spi/_spi_settings.c

@@ -98,7 +98,7 @@ void USPI_writeIni(Unit *unit, IniWriter *iw)
     struct priv *priv = unit->data;
 
     iw_comment(iw, "Peripheral number (SPIx)");
-    iw_entry(iw, "device", "%d", (int)priv->periph_num);
+    iw_entry_d(iw, "device", priv->periph_num);
 
     // TODO show a legend for peripherals and remaps
     iw_comment(iw, "Pin mappings (SCK,MISO,MOSI)");
@@ -114,28 +114,28 @@ void USPI_writeIni(Unit *unit, IniWriter *iw)
 #else
     #error "BAD PLATFORM!"
 #endif
-    iw_entry(iw, "remap", "%d", (int)priv->remap);
+    iw_entry_d(iw, "remap", priv->remap);
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Prescaller: 2,4,8,...,256");
-    iw_entry(iw, "prescaller", "%d", (int)priv->prescaller);
+    iw_entry_d(iw, "prescaller", priv->prescaller);
 
     iw_comment(iw, "Clock polarity: 0,1 (clock idle level)");
-    iw_entry(iw, "cpol", "%d", (int)priv->cpol);
+    iw_entry_d(iw, "cpol", priv->cpol);
 
     iw_comment(iw, "Clock phase: 0,1 (active edge, 0-first, 1-second)");
-    iw_entry(iw, "cpha", "%d", (int)priv->cpha);
+    iw_entry_d(iw, "cpha", priv->cpha);
 
     iw_comment(iw, "Transmit only, disable MISO");
-    iw_entry(iw, "tx-only", str_yn(priv->tx_only));
+    iw_entry_s(iw, "tx-only", str_yn(priv->tx_only));
 
     iw_comment(iw, "Bit order (LSB or MSB first)");
-    iw_entry(iw, "first-bit", cfg_enum2_encode((uint32_t) priv->lsb_first, 0, "MSB", 1, "LSB"));
+    iw_entry_s(iw, "first-bit", cfg_enum2_encode((uint32_t) priv->lsb_first, 0, "MSB", 1, "LSB"));
 
     iw_cmt_newline(iw);
     iw_comment(iw, "SS port name");
     iw_entry(iw, "port", "%c", priv->ssn_port_name);
 
     iw_comment(iw, "SS pins (comma separated, supports ranges)");
-    iw_entry(iw, "pins", cfg_pinmask_encode(priv->ssn_pins, unit_tmp512, 0));
+    iw_entry_s(iw, "pins", cfg_pinmask_encode(priv->ssn_pins, unit_tmp512, 0));
 }

units/template/install.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+echo "Enter unit type identifier (empty to cancel):"
+read x
+
+if [ -e $x ]; then
+  exit; 
+fi
+
+xl="${x,,}"
+xu="${x^^}"
+
+for f in *.h; do mv -- "$f" "${f//tpl/$xl}"; done
+for f in *.c; do mv -- "$f" "${f//tpl/$xl}"; done
+
+sed "s/tpl/$xl/" -i *.h
+sed "s/TPL/$xu/" -i *.h
+sed "s/tpl/$xl/" -i *.c
+sed "s/TPL/$xu/" -i *.c
+
+echo "Unit $xu set up completed. Removing installer.."
+rm '!README.TXT'
+rm $0

units/touch/_touch_api.c

@@ -0,0 +1,11 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+#include "unit_touch.h"
+
+#define TOUCH_INTERNAL
+#include "_touch_internal.h"
+

units/touch/_touch_core.c

@@ -0,0 +1,217 @@
+//
+// Created by MightyPork on 2018/02/25.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+#include "unit_touch.h"
+
+#define TOUCH_INTERNAL
+
+#include "_touch_internal.h"
+
+// discharge time in ms
+#define DIS_TIME 1
+
+static void startNextPhase(Unit *unit);
+
+static void UTOUCH_EventReportJob(Job *job)
+{
+    Unit *unit = job->unit;
+    struct priv *priv = unit->data;
+
+    uint8_t buf[8];
+    PayloadBuilder pb = pb_start(buf, 8, NULL);
+    pb_u32(&pb, pinmask_pack_32(~job->data1, priv->all_channels_mask)); // inverted and packed - all pins (pressed state)
+    pb_u32(&pb, pinmask_pack_32(job->data2, priv->all_channels_mask)); // trigger generating pins
+    assert_param(pb.ok);
+
+    EventReport er = {
+        .unit = unit,
+        .type = 0x00,
+        .length = 8,
+        .data = buf,
+        .timestamp = job->timestamp,
+    };
+
+    EventReport_Send(&er);
+}
+
+static void UTOUCH_CheckForBinaryEvents(Unit *const unit)
+{
+    struct priv *priv = unit->data;
+
+    const uint32_t time_ms = PTIM_GetTime();
+
+    if (priv->last_done_ms == 0) {
+        // avoid bug with trigger on first capture
+        priv->last_done_ms = time_ms;
+    }
+
+    const uint64_t ts = PTIM_GetMicrotime();
+    uint32_t eventpins = 0;
+
+    const uint16_t ms_elapsed = (uint16_t) (time_ms - priv->last_done_ms);
+
+    for (uint16_t i = 0; i < 32; i++) {
+        const uint32_t poke = (uint32_t) (1 << i);
+        if (0 == (priv->all_channels_mask & poke)) continue;
+        if (priv->binary_thr[i] == 0) continue; // skip disabled channels
+
+        const bool isactive = (bool) (priv->binary_active_bits & poke);
+        const bool can_go_up = !isactive && (priv->readouts[i] > (priv->binary_thr[i] + priv->binary_hysteresis));
+        const bool can_go_down = isactive && (priv->readouts[i] < priv->binary_thr[i]);
+
+        if (can_go_up) {
+            priv->bin_trig_cnt[i] += ms_elapsed;
+            if (priv->bin_trig_cnt[i] >= priv->binary_debounce_ms) {
+                priv->binary_active_bits |= poke;
+                priv->bin_trig_cnt[i] = 0; // reset for the other direction of the switch
+
+                eventpins |= poke;
+            }
+        }
+        else if (priv->bin_trig_cnt[i] > 0) {
+            priv->bin_trig_cnt[i] = 0;
+        }
+
+        if (can_go_down) {
+            priv->bin_trig_cnt[i] -= ms_elapsed;
+            if (priv->bin_trig_cnt[i] <= -priv->binary_debounce_ms) {
+                priv->binary_active_bits &= ~poke;
+                priv->bin_trig_cnt[i] = 0; // reset for the other direction of the switch
+
+                eventpins |= poke;
+            }
+        }
+        else if (priv->bin_trig_cnt[i] < 0) {
+            priv->bin_trig_cnt[i] = 0;
+        }
+    }
+
+    if (eventpins != 0) {
+        Job j = {
+            .timestamp = ts,
+            .data1 = priv->binary_active_bits,
+            .data2 = eventpins,
+            .unit = unit,
+            .cb = UTOUCH_EventReportJob,
+        };
+
+        scheduleJob(&j);
+    }
+
+    priv->last_done_ms = time_ms;
+}
+
+void UTOUCH_HandleIrq(void *arg)
+{
+    Unit *unit = arg;
+    struct priv *priv = unit->data;
+
+    if (TSC->ISR & TSC_ISR_MCEF) {
+        priv->status = UTSC_STATUS_FAIL;
+        dbg_touch("TSC Failure.");
+        TSC->ICR = TSC_ICR_EOAIC | TSC_ICR_MCEIC;
+    }
+
+    if (TSC->ISR & TSC_ISR_EOAF) {
+        TSC->ICR = TSC_ICR_EOAIC;
+//        assert_param((TSC->IOGCSR>>16) == priv->groups_phase[priv->next_phase]);
+
+        // Store captured data
+        const uint32_t chmask = TSC->IOCCR;
+        for (int i = 0; i < 32; i++) {
+            if (chmask & (1<<i)) {
+                priv->readouts[i] = (uint16_t) (TSC->IOGXCR[i >> 2] & 0x3FFF);
+            }
+        }
+
+        priv->next_phase++;
+
+        if (!priv->cfg.interlaced) {
+            // check if we've run out of existing or populated groups
+            if (priv->next_phase == 3 || priv->groups_phase[priv->next_phase] == 0) {
+                priv->next_phase = 0;
+                priv->status = UTSC_STATUS_READY;
+                UTOUCH_CheckForBinaryEvents(unit);
+            }
+        }
+
+        TSC->CR &= ~TSC_CR_IODEF; // pull low - discharge
+    }
+
+    priv->ongoing = false;
+    priv->discharge_delay = DIS_TIME;
+}
+
+#if TSC_DEBUG
+static volatile uint32_t xcnt=0;
+#endif
+
+void UTOUCH_updateTick(Unit *unit)
+{
+#if TSC_DEBUG
+    xcnt++;
+#endif
+
+    struct priv *priv = unit->data;
+
+    if (priv->ongoing) {
+        return;
+    }
+
+    if (priv->discharge_delay > 0) {
+        priv->discharge_delay--;
+    } else {
+        startNextPhase(unit);
+    }
+
+#if TSC_DEBUG
+    if(xcnt >= 250) {
+        xcnt=0;
+        PRINTF("> ");
+        for (int i = 0; i < 32; i++) {
+            if (priv->all_channels_mask & (1<<i)) {
+                PRINTF("%d ", (int)priv->readouts[i]);
+            }
+        }
+        PRINTF("\r\n");
+    }
+#endif
+}
+
+static void startNextPhase(Unit *unit)
+{
+    struct priv *priv = unit->data;
+
+    if (priv->all_channels_mask == 0) return;
+
+    if (priv->cfg.interlaced) {
+        // Find the next non-zero bit, wrap around if needed
+        while ((priv->all_channels_mask & (1<<priv->next_phase))==0) {
+            priv->next_phase++;
+            if (priv->next_phase == 32) {
+                priv->next_phase = 0;
+                priv->status = UTSC_STATUS_READY;
+                UTOUCH_CheckForBinaryEvents(unit);
+            }
+        }
+        TSC->IOGCSR = (uint32_t) (1 << (priv->next_phase >> 2)); // phase divided by 4
+        TSC->IOCCR = (uint32_t) (1 << priv->next_phase);
+
+        // interlaced - float neighbouring electrodes
+        TSC->CR |= TSC_CR_IODEF;
+    } else {
+        TSC->IOGCSR = priv->groups_phase[priv->next_phase];
+        TSC->IOCCR = priv->channels_phase[priv->next_phase];
+
+        // separate - keep neighbouring electrodes at GND
+    }
+
+    TSC->ICR = TSC_ICR_EOAIC | TSC_ICR_MCEIC;
+
+    // Go!
+    priv->ongoing = true;
+    TSC->CR |= TSC_CR_START;
+}

units/touch/_touch_init.c

@@ -0,0 +1,221 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+
+#define TOUCH_INTERNAL
+
+#include "_touch_internal.h"
+
+/** Allocate data structure and set defaults */
+error_t UTOUCH_preInit(Unit *unit)
+{
+    struct priv *priv = unit->data = calloc_ck(1, sizeof(struct priv));
+    if (priv == NULL) return E_OUT_OF_MEM;
+
+    priv->cfg.charge_time = 2;
+    priv->cfg.drain_time = 2;
+    priv->cfg.spread_deviation = 0;
+    priv->cfg.ss_presc = 1;
+    priv->cfg.pg_presc = 32;
+    priv->cfg.sense_timeout = 7;
+    memset(priv->cfg.group_scaps, 0, 8);
+    memset(priv->cfg.group_channels, 0, 8);
+    priv->cfg.binary_hysteresis = 10;
+    priv->cfg.binary_debounce_ms = 20;
+
+    return E_SUCCESS;
+}
+
+/** Finalize unit set-up */
+error_t UTOUCH_init(Unit *unit)
+{
+    bool suc = true;
+    struct priv *priv = unit->data;
+
+    unit->tick_interval = 1; // sample every 1 ms
+
+    // copy from conf
+    priv->binary_debounce_ms = priv->cfg.binary_debounce_ms;
+    priv->binary_hysteresis = priv->cfg.binary_hysteresis;
+
+    TRY(rsc_claim(unit, R_TSC));
+
+    // simple bound checks, just clamp without error
+    if (priv->cfg.charge_time > 16) priv->cfg.charge_time = 16;
+    if (priv->cfg.charge_time < 1) priv->cfg.charge_time = 1;
+
+    if (priv->cfg.drain_time > 16) priv->cfg.drain_time = 16;
+    if (priv->cfg.drain_time < 1) priv->cfg.drain_time = 1;
+
+    if (priv->cfg.spread_deviation > 128) priv->cfg.drain_time = 128;
+
+    if (priv->cfg.ss_presc > 2) priv->cfg.ss_presc = 2;
+    if (priv->cfg.ss_presc < 1) priv->cfg.ss_presc = 1;
+
+    if (priv->cfg.sense_timeout > 7) priv->cfg.sense_timeout = 7;
+    if (priv->cfg.sense_timeout < 1) priv->cfg.sense_timeout = 1;
+
+    uint8_t tmppgpresc = priv->cfg.pg_presc;
+    if (tmppgpresc == 0) return E_BAD_CONFIG;
+    uint8_t pgpresc_reg = 0;
+    while ((tmppgpresc & 1) == 0 && tmppgpresc != 0) {
+        pgpresc_reg++;
+        tmppgpresc >>= 1;
+    }
+    if (tmppgpresc != 1 || pgpresc_reg > 7) {
+        dbg("Bad pgpresc");
+        return E_BAD_CONFIG; // TODO better reporting
+    }
+
+    if ((pgpresc_reg==0 && priv->cfg.drain_time<=2) || (pgpresc_reg==1 && priv->cfg.drain_time==0)) {
+        dbg("Illegal PGPSC vs CTPL");
+        return E_BAD_CONFIG;
+    }
+
+    // enable clock
+    hw_periph_clock_enable(TSC);
+    // reset
+    __HAL_RCC_TSC_FORCE_RESET();
+    __HAL_RCC_TSC_RELEASE_RESET();
+
+    priv->all_channels_mask = 0;
+
+    for (int gi = 0; gi < 8; gi++) {
+        const uint8_t cap = priv->cfg.group_scaps[gi];
+        const uint8_t ch = priv->cfg.group_channels[gi];
+
+        if (cap == 0) {
+            if (ch != 0) {
+                dbg_touch("TSC group %d has no cap!", (int) (gi + 1));
+                return E_BAD_CONFIG;
+            }
+            continue;
+        }
+
+        if (ch == 0) continue; // if no channels, don't bother setting up anything
+
+        if (cap != 2 && cap != 4 && cap != 8 && cap != 16) {
+            dbg_touch("TSC group %d has more than 1 cap!", (int) (gi + 1));
+            return E_BAD_CONFIG;
+        }
+
+        if (cap & ch) {
+            dbg_touch("TSC pin can't be both channel and cap! (gpr %d)", (int) (gi + 1));
+            return E_BAD_CONFIG;
+        }
+
+        // This is a loop through the pins in a group gi
+        int phasenum = 0;
+        for (int pi = 0; pi < 4; pi++) {
+            // pin numbers are 1-based in the config
+            const bool iscap = 0 != (cap & (2 << pi));
+            const bool isch = 0 != (ch & (2 << pi));
+
+            if (!iscap && !isch) continue;
+
+            Resource r = utouch_group_rscs[gi][pi];
+            TRY(rsc_claim(unit, r));
+
+            GPIO_TypeDef *port;
+            uint32_t ll;
+            assert_param(hw_pinrsc2ll(r, &port, &ll));
+            LL_GPIO_SetPinOutputType(port, ll, isch ? LL_GPIO_OUTPUT_PUSHPULL : LL_GPIO_OUTPUT_OPENDRAIN);
+
+            // 7 and 8 (1-based) use AF1, else AF3
+            TRY(hw_configure_gpiorsc_af(r, gi >= 6 ? LL_GPIO_AF_1 : LL_GPIO_AF_3));
+
+            uint32_t bit = (uint32_t) (1 << (gi * 4 + pi));
+
+            if (iscap) {
+                dbg_touch("TSC cap @ %s", rsc_get_name(r));
+                // Sampling cap
+                TSC->IOSCR |= bit;
+
+                // Disable pin hysteresis (causes noise)
+                TSC->IOHCR ^= bit;
+            }
+            else {
+                dbg_touch("TSC ch @ %s", rsc_get_name(r));
+
+                if (priv->cfg.interlaced) {
+                    // interlaced - only update the mask beforehand
+                    priv->all_channels_mask |= bit;
+                } else {
+                    // channels are configured individually when read.
+                    // we prepare bitmaps to use for the read groups (all can be read in at most 3 steps)
+                    priv->channels_phase[phasenum] |= bit; // this is used for the channel selection register
+                    priv->groups_phase[phasenum] |= 1 << gi; // this will be used for the group enable register, if all 0, this and any following phases are unused.
+                    phasenum++;
+                }
+            }
+        }
+    }
+
+    // common TSC config
+    TSC->CR =
+        ((priv->cfg.charge_time - 1) << TSC_CR_CTPH_Pos) |
+        ((priv->cfg.drain_time - 1) << TSC_CR_CTPL_Pos) |
+        ((priv->cfg.ss_presc - 1) << TSC_CR_SSPSC_Pos) |
+        (pgpresc_reg << TSC_CR_PGPSC_Pos) |
+        ((priv->cfg.sense_timeout - 1) << TSC_CR_MCV_Pos) |
+        TSC_CR_TSCE;
+
+    if (priv->cfg.spread_deviation > 0) {
+        TSC->CR |= ((priv->cfg.spread_deviation - 1) << TSC_CR_SSD_Pos) | TSC_CR_SSE;
+    }
+
+    dbg_touch("CR = %08x, ht is %d, lt is %d", (int)TSC->CR,
+              (int)priv->cfg.charge_time,
+              (int)priv->cfg.drain_time);
+
+    // iofloat is used for discharging
+
+    // Enable the interrupts
+    TSC->IER = TSC_IER_EOAIE | TSC_IER_MCEIE;
+    irqd_attach(TSC, UTOUCH_HandleIrq, unit);
+
+    if (!priv->cfg.interlaced) {
+        dbg_touch("TSC phases:");
+        for (int i = 0; i < 3; i++) {
+            priv->all_channels_mask |= priv->channels_phase[i];
+
+            dbg_touch(" %d: ch %08"PRIx32", g %02"PRIx32,
+                      i + 1,
+                      priv->channels_phase[i],
+                      (uint32_t) priv->groups_phase[i]);
+        }
+    }
+
+    priv->status = UTSC_STATUS_BUSY; // first loop ...
+    priv->next_phase = 0;
+
+    // starts in the tick callback
+
+    return E_SUCCESS;
+}
+
+
+/** Tear down the unit */
+void UTOUCH_deInit(Unit *unit)
+{
+    struct priv *priv = unit->data;
+
+    // de-init peripherals
+    if (unit->status == E_SUCCESS) {
+        hw_periph_clock_disable(TSC);
+        // clear all registers to their default values
+        __HAL_RCC_TSC_FORCE_RESET();
+        __HAL_RCC_TSC_RELEASE_RESET();
+
+        irqd_detach(TSC, UTOUCH_HandleIrq);
+    }
+
+    // Release all resources, deinit pins
+    rsc_teardown(unit);
+
+    // Free memory
+    free_ck(unit->data);
+}

units/touch/_touch_internal.h

@@ -0,0 +1,95 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#ifndef GEX_F072_TOUCH_INTERNAL_H
+#define GEX_F072_TOUCH_INTERNAL_H
+
+#ifndef TOUCH_INTERNAL
+#error bad include!
+#endif
+
+#include "unit_base.h"
+
+#define TSC_DEBUG 0
+
+#if TSC_DEBUG
+#define dbg_touch(f,...) dbg(f,##__VA_ARGS__)
+#else
+#define dbg_touch(f,...) do{}while(0)
+#endif
+
+enum utsc_status {
+    UTSC_STATUS_BUSY = 0,
+    UTSC_STATUS_READY = 1,
+    UTSC_STATUS_FAIL = 2
+};
+
+/** Private data structure */
+struct priv {
+    // settings
+    struct {
+        uint8_t charge_time;  // 1-16 -> 0..15
+        uint8_t drain_time;   // 1-16 -> 0..15
+        uint8_t spread_deviation; // 1-128, 0=off ... 0-127, 0 sets 0 to SSE
+        uint8_t ss_presc;     // 1-2 -> 0..1
+        uint8_t pg_presc;     // 1,2,4,8,16,32,64,128 -> 0..7 when writing to the periph
+        uint8_t sense_timeout; // 1-7 -> 0..6 hex when writing to the periph
+        // the schmitts must be disabled on all used channels, restored to 0xFFFF on deinit
+        uint8_t group_scaps[8];
+        uint8_t group_channels[8];
+        bool interlaced;
+        uint16_t binary_debounce_ms;
+        uint16_t binary_hysteresis;
+    } cfg;
+
+    uint8_t next_phase;
+    uint8_t discharge_delay;
+    uint32_t channels_phase[3];
+    uint8_t groups_phase[3];
+    uint16_t readouts[32];
+    int16_t bin_trig_cnt[32];
+    uint16_t binary_debounce_ms;
+    uint16_t binary_hysteresis;
+    uint16_t binary_thr[32];
+    uint32_t binary_active_bits;
+    uint32_t all_channels_mask;
+    uint32_t last_done_ms;
+    bool ongoing;
+
+    enum utsc_status status;
+} __attribute__((packed));
+
+extern const char *utouch_group_labels[8];
+extern const Resource utouch_group_rscs[8][4];
+
+/** Allocate data structure and set defaults */
+error_t UTOUCH_preInit(Unit *unit);
+
+/** Load from a binary buffer stored in Flash */
+void UTOUCH_loadBinary(Unit *unit, PayloadParser *pp);
+
+/** Write to a binary buffer for storing in Flash */
+void UTOUCH_writeBinary(Unit *unit, PayloadBuilder *pb);
+
+// ------------------------------------------------------------------------
+
+/** Parse a key-value pair from the INI file */
+error_t UTOUCH_loadIni(Unit *unit, const char *key, const char *value);
+
+/** Generate INI file section for the unit */
+void UTOUCH_writeIni(Unit *unit, IniWriter *iw);
+
+// ------------------------------------------------------------------------
+
+/** Finalize unit set-up */
+error_t UTOUCH_init(Unit *unit);
+
+/** Tear down the unit */
+void UTOUCH_deInit(Unit *unit);
+
+void UTOUCH_updateTick(Unit *unit);
+
+void UTOUCH_HandleIrq(void *arg);
+
+#endif //GEX_F072_TOUCH_INTERNAL_H

units/touch/_touch_settings.c

@@ -0,0 +1,187 @@
+//
+// Created by MightyPork on 2018/02/03.
+//
+
+#include "platform.h"
+#include "unit_base.h"
+
+#define TOUCH_INTERNAL
+#include "_touch_internal.h"
+
+const char *utouch_group_labels[8] = {
+    "1:A0, 2:A1, 3:A2, 4:A3",
+    "1:A4, 2:A5, 3:A6, 4:A7",
+    "1:C5, 2:B0, 3:B1, 4:B2",
+    "1:A9, 2:A10, 3:A11, 4:A12",
+    "1:B3, 2:B4, 3:B6, 4:B7",
+    "1:B11, 2:B12, 3:B13, 4:B14",
+    "1:E2, 2:E3, 3:E4, 4:E5",
+    "1:D12, 2:D13, 3:D14, 4:D15",
+};
+
+const Resource utouch_group_rscs[8][4] = {
+    {R_PA0, R_PA1, R_PA2, R_PA3},
+    {R_PA4, R_PA5, R_PA6, R_PA7},
+    {R_PC5, R_PB0, R_PB1, R_PB2},
+    {R_PA9, R_PA10, R_PA11, R_PA12},
+    {R_PB3, R_PB4, R_PB6, R_PB7},
+    {R_PB11, R_PB12, R_PB13, R_PB14},
+    {R_PE2, R_PE3, R_PE4, R_PE5},
+    {R_PD12, R_PD13, R_PD14, R_PD15},
+};
+
+/** Load from a binary buffer stored in Flash */
+void UTOUCH_loadBinary(Unit *unit, PayloadParser *pp)
+{
+    struct priv *priv = unit->data;
+
+    uint8_t version = pp_u8(pp);
+    (void)version;
+
+    priv->cfg.charge_time = pp_u8(pp);
+    priv->cfg.drain_time = pp_u8(pp);
+    priv->cfg.spread_deviation = pp_u8(pp);
+    priv->cfg.ss_presc = pp_u8(pp);
+    priv->cfg.pg_presc = pp_u8(pp);
+    priv->cfg.sense_timeout = pp_u8(pp);
+    pp_buf(pp, priv->cfg.group_scaps, 8);
+    pp_buf(pp, priv->cfg.group_channels, 8);
+
+    if (version >= 1) {
+        priv->cfg.interlaced = pp_bool(pp);
+    }
+
+    if (version >= 2) {
+        priv->cfg.binary_debounce_ms = pp_u16(pp);
+        priv->cfg.binary_hysteresis = pp_u16(pp);
+    }
+}
+
+/** Write to a binary buffer for storing in Flash */
+void UTOUCH_writeBinary(Unit *unit, PayloadBuilder *pb)
+{
+    struct priv *priv = unit->data;
+
+    pb_u8(pb, 2); // version
+
+    pb_u8(pb, priv->cfg.charge_time);
+    pb_u8(pb, priv->cfg.drain_time);
+    pb_u8(pb, priv->cfg.spread_deviation);
+    pb_u8(pb, priv->cfg.ss_presc);
+    pb_u8(pb, priv->cfg.pg_presc);
+    pb_u8(pb, priv->cfg.sense_timeout);
+    pb_buf(pb, priv->cfg.group_scaps, 8);
+    pb_buf(pb, priv->cfg.group_channels, 8);
+    pb_bool(pb, priv->cfg.interlaced);
+    pb_u16(pb, priv->cfg.binary_debounce_ms);
+    pb_u16(pb, priv->cfg.binary_hysteresis);
+}
+
+// ------------------------------------------------------------------------
+
+/** Parse a key-value pair from the INI file */
+error_t UTOUCH_loadIni(Unit *unit, const char *key, const char *value)
+{
+    bool suc = true;
+    struct priv *priv = unit->data;
+
+    if (streq(key, "charge-time")) {
+        priv->cfg.charge_time = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "drain-time")) {
+        priv->cfg.drain_time = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "ss-deviation")) {
+        priv->cfg.spread_deviation = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "ss-clock-prediv")) {
+        priv->cfg.ss_presc = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "pg-clock-prediv")) {
+        priv->cfg.pg_presc = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "sense-timeout")) {
+        priv->cfg.sense_timeout = cfg_u8_parse(value, &suc);
+    }
+    else if (streq(key, "interlaced-pads")) {
+        priv->cfg.interlaced = cfg_bool_parse(value, &suc);
+    }
+    else if (streq(key, "btn-debounce")) {
+        priv->cfg.binary_debounce_ms = cfg_u16_parse(value, &suc);
+    }
+    else if (streq(key, "btn-hysteresis")) {
+        priv->cfg.binary_hysteresis = cfg_u16_parse(value, &suc);
+    }
+    else {
+        volatile char namebuf[10]; // must be volatile or gcc optimizes out the second compare and fucks it up
+
+        for (int i = 0; i < 6; i++) { // skip 7,8
+            SPRINTF(namebuf, "g%d_cap", i+1);
+            if (streq(key, namebuf)) {
+                priv->cfg.group_scaps[i] = (uint8_t) cfg_pinmask_parse(value, &suc);
+                goto matched;
+            }
+
+            SPRINTF(namebuf, "g%d_ch", i+1);
+            if (streq(key, namebuf)) {
+                priv->cfg.group_channels[i] = (uint8_t) cfg_pinmask_parse(value, &suc);
+                goto matched;
+            }
+        }
+
+        return E_BAD_KEY;
+    }
+
+matched:
+    if (!suc) return E_BAD_VALUE;
+    return E_SUCCESS;
+}
+
+/** Generate INI file section for the unit */
+void UTOUCH_writeIni(Unit *unit, IniWriter *iw)
+{
+    struct priv *priv = unit->data;
+
+    iw_comment(iw, "This unit utilizes the touch sensing controller.");
+    iw_comment(iw, "See the reference manual for details about its function.");
+    iw_cmt_newline(iw);
+
+    iw_comment(iw, "Pulse generator clock prescaller (1,2,4,...,128)");
+    iw_entry_d(iw, "pg-clock-prediv", priv->cfg.pg_presc);
+    iw_comment(iw, "Sense pad charging time (1-16)");
+    iw_entry_d(iw, "charge-time", priv->cfg.charge_time);
+    iw_comment(iw, "Charge transfer time (1-16)");
+    iw_entry_d(iw, "drain-time", priv->cfg.drain_time);
+    iw_comment(iw, "Measurement timeout (1-7)");
+    iw_entry_d(iw, "sense-timeout", priv->cfg.sense_timeout);
+
+    iw_cmt_newline(iw);
+    iw_comment(iw, "Spread spectrum max deviation (0-128,0=off)");
+    iw_entry_d(iw, "ss-deviation", priv->cfg.spread_deviation);
+    iw_comment(iw, "Spreading clock prescaller (1,2)");
+    iw_entry_d(iw, "ss-clock-prediv", priv->cfg.ss_presc);
+
+    iw_cmt_newline(iw);
+    iw_comment(iw, "Optimize for interlaced pads (individual sampling with others floating)");
+    iw_entry_s(iw, "interlaced-pads", str_yn(priv->cfg.interlaced));
+
+    iw_cmt_newline(iw);
+    iw_comment(iw, "Button mode debounce (ms) and release hysteresis (lsb)");
+    iw_entry_d(iw, "btn-debounce", priv->cfg.binary_debounce_ms);
+    iw_entry_d(iw, "btn-hysteresis", priv->cfg.binary_hysteresis);
+
+    iw_cmt_newline(iw);
+    iw_comment(iw, "Each used group must have 1 sampling capacitor and 1-3 channels.");
+    iw_comment(iw, "Channels are numbered 1,2,3,4");
+    iw_cmt_newline(iw);
+
+    char namebuf[10];
+    for (int i = 0; i < 6; i++) { // skip 7,8
+        iw_commentf(iw,  "Group%d - %s", i+1, utouch_group_labels[i]);
+        SPRINTF(namebuf, "g%d_cap", i+1);
+        iw_entry_s(iw, namebuf, cfg_pinmask_encode(priv->cfg.group_scaps[i], unit_tmp512, true));
+        SPRINTF(namebuf, "g%d_ch", i+1);
+        iw_entry_s(iw, namebuf, cfg_pinmask_encode(priv->cfg.group_channels[i], unit_tmp512, true));
+    }
+}
+

units/touch/unit_touch.c

@@ -0,0 +1,136 @@
+//
+// Created by MightyPork on 2017/11/25.
+//
+
+#include "unit_base.h"
+#include "unit_touch.h"
+
+#define TOUCH_INTERNAL
+#include "_touch_internal.h"
+
+// ------------------------------------------------------------------------
+
+enum TouchCmd_ {
+    CMD_READ=0,
+    CMD_SET_BIN_THR=1,
+    CMD_DISABLE_ALL_REPORTS=2,
+    CMD_SET_DEBOUNCE_TIME=3,
+    CMD_SET_HYSTERESIS=4,
+    CMD_GET_CH_COUNT=10,
+};
+
+/** Handle a request message */
+static error_t UTOUCH_handleRequest(Unit *unit, TF_ID frame_id, uint8_t command, PayloadParser *pp)
+{
+    struct priv* priv = unit->data;
+    PayloadBuilder pb = pb_start(unit_tmp512, UNIT_TMP_LEN, NULL);
+
+    switch (command) {
+        /**
+         * read the current touch pad values (smaller = higher capacity)
+         *
+         * resp: a list of u16 (order: group and pin, ascending)
+         */
+        case CMD_READ:
+            if (priv->status == UTSC_STATUS_BUSY) return E_BUSY;
+            if (priv->status == UTSC_STATUS_FAIL) return E_HW_TIMEOUT;
+
+            for (int i = 0; i < 32; i++) {
+                if (priv->all_channels_mask & (1<<i)) {
+                    pb_u16(&pb, priv->readouts[i]);
+                }
+            }
+            com_respond_pb(frame_id, MSG_SUCCESS, &pb);
+            return E_SUCCESS;
+
+        /**
+         * Set thresholds for the button mode.
+         *
+         * pld: a list of u16 for the enabled channels (order: group and pin, ascending)
+         */
+        case CMD_SET_BIN_THR:
+            for (int i = 0; i < 32; i++) {
+                if (priv->all_channels_mask & (1<<i)) {
+                    priv->bin_trig_cnt[i] = 0;
+                    priv->binary_thr[i] = pp_u16(pp);
+                    if (priv->readouts[i] >= (priv->binary_thr[i] + priv->binary_hysteresis)) {
+                        priv->binary_active_bits |= 1<<i;
+                    }
+                }
+            }
+            return E_SUCCESS;
+
+        /**
+         * Set the debounce time in ms (replaces the default value from settings)
+         *
+         * pld: ms:u16
+         */
+        case CMD_SET_DEBOUNCE_TIME:
+            priv->binary_debounce_ms = pp_u16(pp);
+            return E_SUCCESS;
+
+        /**
+         * Set hysteresis (replaces the default value from settings)
+         *
+         * Hysteresis is added to the threshold value for the switch-off level
+         * (switch-off happens when the measured value is exceeded - capacity of the pad drops)
+         *
+         * pld: hyst:u16
+         */
+        case CMD_SET_HYSTERESIS:
+            priv->binary_hysteresis = pp_u16(pp);
+            return E_SUCCESS;
+
+        /**
+         * Disable button mode reports. This effectively sets all thresholds to 0, disabling checking.
+         */
+        case CMD_DISABLE_ALL_REPORTS:
+            for (int i = 0; i < 32; i++) {
+                if (priv->all_channels_mask & (1<<i)) {
+                    priv->binary_thr[i] = 0;
+                    priv->bin_trig_cnt[i] = 0;
+                }
+            }
+            priv->binary_active_bits = 0;
+            return E_SUCCESS;
+
+        /**
+         * Get the number of configured touch pad channels
+         *
+         * resp: count:u8
+         */
+        case CMD_GET_CH_COUNT:;
+            uint8_t nb = 0;
+            for (int i = 0; i < 32; i++) {
+                if (priv->all_channels_mask & (1<<i)) {
+                    nb++;
+                }
+            }
+            pb_u8(&pb, nb);
+            com_respond_pb(frame_id, MSG_SUCCESS, &pb);
+            return E_SUCCESS;
+
+        default:
+            return E_UNKNOWN_COMMAND;
+    }
+}
+
+// ------------------------------------------------------------------------
+
+/** Unit template */
+const UnitDriver UNIT_TOUCH = {
+    .name = "TOUCH",
+    .description = "Capacitive touch sensing",
+    // Settings
+    .preInit = UTOUCH_preInit,
+    .cfgLoadBinary = UTOUCH_loadBinary,
+    .cfgWriteBinary = UTOUCH_writeBinary,
+    .cfgLoadIni = UTOUCH_loadIni,
+    .cfgWriteIni = UTOUCH_writeIni,
+    // Init
+    .init = UTOUCH_init,
+    .deInit = UTOUCH_deInit,
+    // Function
+    .handleRequest = UTOUCH_handleRequest,
+    .updateTick = UTOUCH_updateTick,
+};

units/touch/unit_touch.h

@@ -0,0 +1,16 @@
+//
+// Created by MightyPork on 2017/11/25.
+//
+// Digital input unit; single or multiple pin read access on one port (A-F)
+//
+
+#ifndef U_TOUCH_H
+#define U_TOUCH_H
+
+#include "unit.h"
+
+extern const UnitDriver UNIT_TOUCH;
+
+// UU_ prototypes
+
+#endif //U_TOUCH_H

units/usart/_usart_settings.c

@@ -156,7 +156,7 @@ void UUSART_writeIni(Unit *unit, IniWriter *iw)
     struct priv *priv = unit->data;
 
     iw_comment(iw, "Peripheral number (UARTx 1-4)");
-    iw_entry(iw, "device", "%d", (int)priv->periph_num);
+    iw_entry_d(iw, "device", priv->periph_num);
 
     iw_comment(iw, "Pin mappings (TX,RX,CK,CTS,RTS/DE)");
 #if GEX_PLAT_F072_DISCOVERY
@@ -173,41 +173,41 @@ void UUSART_writeIni(Unit *unit, IniWriter *iw)
 #else
     #error "BAD PLATFORM!"
 #endif
-    iw_entry(iw, "remap", "%d", (int)priv->remap);
+    iw_entry_d(iw, "remap", priv->remap);
 
     iw_cmt_newline(iw);
-    iw_comment(iw, "Baud rate in bps (eg. 9600, 115200)"); // TODO examples/range
-    iw_entry(iw, "baud-rate", "%d", (int)priv->baudrate);
+    iw_comment(iw, "Baud rate in bps (eg. 9600)");
+    iw_entry_d(iw, "baud-rate", priv->baudrate);
 
     iw_comment(iw, "Parity type (NONE, ODD, EVEN)");
-    iw_entry(iw, "parity", cfg_enum3_encode(priv->parity,
+    iw_entry_s(iw, "parity", cfg_enum3_encode(priv->parity,
                                                   0, "NONE",
                                                   1, "ODD",
                                                   2, "EVEN"));
 
     iw_comment(iw, "Number of stop bits (0.5, 1, 1.5, 2)");
-    iw_entry(iw, "stop-bits", cfg_enum4_encode(priv->stopbits,
+    iw_entry_s(iw, "stop-bits", cfg_enum4_encode(priv->stopbits,
                                                      0, "0.5",
                                                      1, "1",
                                                      2, "1.5",
                                                      3, "2"));
 
     iw_comment(iw, "Bit order (LSB or MSB first)");
-    iw_entry(iw, "first-bit", cfg_enum2_encode((uint32_t) priv->lsb_first,
+    iw_entry_s(iw, "first-bit", cfg_enum2_encode((uint32_t) priv->lsb_first,
                                                0, "MSB",
                                                1, "LSB"));
 
     iw_comment(iw, "Word width (7,8,9) - including parity bit if used");
-    iw_entry(iw, "word-width", "%d", (int)priv->width);
+    iw_entry_d(iw, "word-width", (int)priv->width);
 
     iw_comment(iw, "Enabled lines (RX,TX,RXTX)");
-    iw_entry(iw, "direction", cfg_enum3_encode(priv->direction,
+    iw_entry_s(iw, "direction", cfg_enum3_encode(priv->direction,
                                                1, "RX",
                                                2, "TX",
                                                3, "RXTX"));
 
     iw_comment(iw, "Hardware flow control (NONE, RTS, CTS, FULL)");
-    iw_entry(iw, "hw-flow-control", cfg_enum4_encode(priv->hw_flow_control,
+    iw_entry_s(iw, "hw-flow-control", cfg_enum4_encode(priv->hw_flow_control,
                                                            0, "NONE",
                                                            1, "RTS",
                                                            2, "CTS",
@@ -215,19 +215,19 @@ void UUSART_writeIni(Unit *unit, IniWriter *iw)
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Generate serial clock (Y,N)");
-    iw_entry(iw, "clock-output", str_yn(priv->clock_output));
-    iw_comment(iw, "Output clock polarity: 0,1 (clock idle level)");
-    iw_entry(iw, "cpol", "%d", (int)priv->cpol);
-    iw_comment(iw, "Output clock phase: 0,1 (active edge, 0-first, 1-second)");
-    iw_entry(iw, "cpha", "%d", (int)priv->cpha);
+    iw_entry_s(iw, "clock-output", str_yn(priv->clock_output));
+    iw_comment(iw, "Clock polarity: 0,1");
+    iw_entry_d(iw, "cpol", priv->cpol);
+    iw_comment(iw, "Clock phase: 0,1");
+    iw_entry_d(iw, "cpha", priv->cpha);
 
     iw_cmt_newline(iw);
     iw_comment(iw, "Generate RS485 Driver Enable signal (Y,N) - uses RTS pin");
-    iw_entry(iw, "de-output", str_yn(priv->de_output));
+    iw_entry_s(iw, "de-output", str_yn(priv->de_output));
     iw_comment(iw, "DE active level: 0,1");
-    iw_entry(iw, "de-polarity", "%d", (int)(priv->de_polarity));
+    iw_entry_d(iw, "de-polarity", (priv->de_polarity));
     iw_comment(iw, "DE assert time (0-31)");
-    iw_entry(iw, "de-assert-time", "%d", (int)(priv->de_assert_time));
+    iw_entry_d(iw, "de-assert-time", (priv->de_assert_time));
     iw_comment(iw, "DE clear time (0-31)");
-    iw_entry(iw, "de-clear-time", "%d", (int)(priv->de_clear_time));
+    iw_entry_d(iw, "de-clear-time", (priv->de_clear_time));
 }

utils/ini_parser.c

@@ -1,526 +1,135 @@
-
-/* #line 1 "ini_parser.rl" */
-
-/* Ragel constants block */
 #include "ini_parser.h"
 
-// Ragel setup
-
-/* #line 10 "ini_parser.c" */
-static const char _ini_actions[] = {
-	0, 1, 1, 1, 2, 1, 3, 1, 
-	4, 1, 5, 1, 6, 1, 7, 1, 
-	8, 1, 9, 1, 10, 1, 11, 1, 
-	13, 2, 0, 4, 2, 12, 4
+enum nini_state {
+    NINI_IDLE,
+    NINI_SECTION,
+    NINI_KEY,
+    NINI_VALUE,
+    NINI_COMMENT,
 };
 
-static const char _ini_eof_actions[] = {
-	0, 23, 5, 5, 15, 15, 15, 15, 
-	19, 19, 0, 0, 0, 0, 0, 0, 
-	0
-};
+static struct {
+    uint8_t section_i;
+    char section[INI_KEY_MAX];
 
-static const int ini_start = 1;
-static const int ini_first_final = 12;
-static const int ini_error = 0;
+    uint8_t key_i;
+    char key[INI_KEY_MAX];
 
-static const int ini_en_section = 2;
-static const int ini_en_keyvalue = 4;
-static const int ini_en_comment = 8;
-static const int ini_en_discard2eol = 10;
-static const int ini_en_main = 1;
+    uint8_t value_i;
+    char value[INI_VALUE_MAX];
+    bool val_last_space;
 
+    IniParserCallback cb;
+    void *userdata;
+    enum nini_state state;
+} nini;
 
-/* #line 10 "ini_parser.rl" */
-
-
-// Persistent state
-static int8_t cs = -1; //!< Ragel's Current State variable
-static uint32_t buff_i = 0; //!< Write pointer for the buffers
-static char value_quote = 0; //!< Quote character of the currently collected value
-static bool value_nextesc = false; //!< Next character is escaped, trated specially, and if quote, as literal quote character
-static IniParserCallback keyCallback = NULL; //!< Currently assigned callback
-static void *userdata = NULL; //!< Currently assigned user data for the callback
-
-// Buffers
-static char keybuf[INI_KEY_MAX];
-static char secbuf[INI_KEY_MAX+10];
-static char valbuf[INI_VALUE_MAX];
-
-// See header for doxygen!
-
-void
-ini_parse_reset_partial(void)
+void ini_parse_begin(IniParserCallback callback, void *userData)
 {
-	buff_i = 0;
-	value_quote = 0;
-	value_nextesc = false;
-}
-
-void
-ini_parse_reset(void)
-{
-	ini_parse_reset_partial();
-	keybuf[0] = secbuf[0] = valbuf[0] = 0;
-	
-/* #line 67 "ini_parser.c" */
-	{
-	cs = ini_start;
-	}
-
-/* #line 41 "ini_parser.rl" */
-}
-
-void
-ini_parser_error(const char* msg)
-{
-	ini_error("Parser error: %s", msg);
-	ini_parse_reset_partial();
-}
-
-
-void
-ini_parse_begin(IniParserCallback callback, void *userData)
-{
-	keyCallback = callback;
-	userdata = userData;
     ini_parse_reset();
+    nini.cb = callback;
+    nini.userdata = userData;
 }
 
-
-void
-*ini_parse_end(void)
+void ini_parse(const char *data, size_t len)
 {
-	ini_parse("\n", 1);
-	if (keyCallback) {
-		keyCallback = NULL;
+    for (; len > 0; len--) {
+        char c = *data++;
+        if (c == ' ' || c == '\t' || c == '\r' || c == '\n') {
+            if (nini.state != NINI_VALUE && nini.state != NINI_COMMENT)
+                continue;
         }
 
-	void *ud = userdata;
-	userdata = NULL;
-	return ud;
+        switch (nini.state) {
+            case NINI_IDLE:
+                if (c == '[') {
+                    nini.state = NINI_SECTION;
+                    nini.section_i = 0;
+                }
+                else if (c == '#') {
+                    nini.state = NINI_COMMENT;
+                }
+                else {
+                    nini.state = NINI_KEY;
+                    nini.key_i = 0;
+                    nini.value_i = 0;
+                    nini.val_last_space = false;
+                    nini.key[nini.key_i++] = c;
+                }
+                break;
+
+            case NINI_COMMENT:
+                if (c == '\n' || c == '\r') {
+                    nini.state = NINI_IDLE;
+                }
+                break;
+
+            case NINI_SECTION:
+                if (c == ']') {
+                    nini.section[nini.section_i] = 0;
+                    nini.state = NINI_COMMENT; // discard to EOL
+                    break;
+                }
+                else if (nini.section_i < INI_KEY_MAX - 1) {
+                    nini.section[nini.section_i++] = c;
+                }
+                break;
+
+            case NINI_KEY:
+                if (c == '=') {
+                    nini.key[nini.key_i] = 0;
+                    nini.state = NINI_VALUE;
+                }
+                else if (nini.key_i < INI_KEY_MAX - 1) {
+                    nini.key[nini.key_i++] = c;
+                }
+                break;
+
+            case NINI_VALUE:
+                switch (c) {
+                    case ' ':
+                    case '\t':
+                        if (nini.value_i) nini.val_last_space = true;
+                        break;
+                    case '\r':
+                    case '\n':
+                        nini.value[nini.value_i] = 0;
+                        nini.state = NINI_IDLE;
+                        nini.cb(nini.section, nini.key, nini.value, nini.userdata);
+                        break;
+                    default:
+                        if (nini.val_last_space && nini.value_i < INI_VALUE_MAX - 1) {
+                            nini.value[nini.value_i++] = ' ';
+                        }
+
+                        if (nini.value_i < INI_VALUE_MAX - 1) {
+                            nini.value[nini.value_i++] = c;
+                        }
+                        nini.val_last_space = false;
+                }
+        }
+    }
 }
 
+void *ini_parse_end(void)
+{
+    if (nini.state == NINI_VALUE) {
+        nini.value[nini.value_i] = 0;
+        nini.state = NINI_IDLE;
+        nini.cb(nini.section, nini.key, nini.value, nini.userdata);
+    }
 
-void
-ini_parse_file(const char *text, size_t len, IniParserCallback callback, void *userData)
+    return nini.userdata;
+}
+
+void ini_parse_file(const char *text, size_t len, IniParserCallback callback, void *userData)
 {
     ini_parse_begin(callback, userData);
     ini_parse(text, len);
     ini_parse_end();
 }
 
-static void
-rtrim_buf(char *buf, int32_t end)
+void ini_parse_reset(void)
 {
-	if (end > 0) {
-		while ((uint8_t)buf[--end] < 33);
-		end++; // go past the last character
-	}
-
-	buf[end] = 0;
-}
-
-
-void
-ini_parse(const char *newstr, size_t len)
-{
-	int32_t i;
-	char c;
-	bool isnl;
-	bool isquot;
-
-	// Load new data to Ragel vars
-	const uint8_t *p;
-	const uint8_t *eof;
-	const uint8_t *pe;
-
-	if (len == 0) while(newstr[++len] != 0); // alternative to strlen
-
-	p = (const uint8_t *) newstr;
-	eof = NULL;
-	pe = (const uint8_t *) (newstr + len);
-
-	// Init Ragel on the first run
-	if (cs == -1) {
-		ini_parse_reset();
-	}
-
-	// The parser
-	
-/* #line 152 "ini_parser.c" */
-	{
-	const char *_acts;
-	unsigned int _nacts;
-
-	if ( p == pe )
-		goto _test_eof;
-	if ( cs == 0 )
-		goto _out;
-_resume:
-	switch ( cs ) {
-case 1:
-	switch( (*p) ) {
-		case 32u: goto tr1;
-		case 35u: goto tr3;
-		case 58u: goto tr0;
-		case 59u: goto tr3;
-		case 61u: goto tr0;
-		case 91u: goto tr4;
-	}
-	if ( (*p) < 9u ) {
-		if ( (*p) <= 8u )
-			goto tr0;
-	} else if ( (*p) > 13u ) {
-		if ( 14u <= (*p) && (*p) <= 31u )
-			goto tr0;
-	} else
-		goto tr1;
-	goto tr2;
-case 0:
-	goto _out;
-case 12:
-	goto tr0;
-case 2:
-	switch( (*p) ) {
-		case 9u: goto tr6;
-		case 32u: goto tr6;
-		case 93u: goto tr5;
-	}
-	if ( (*p) <= 31u )
-		goto tr5;
-	goto tr7;
-case 3:
-	if ( (*p) == 93u )
-		goto tr8;
-	if ( (*p) > 8u ) {
-		if ( 10u <= (*p) && (*p) <= 31u )
-			goto tr5;
-	} else
-		goto tr5;
-	goto tr7;
-case 13:
-	goto tr5;
-case 4:
-	switch( (*p) ) {
-		case 10u: goto tr10;
-		case 58u: goto tr11;
-		case 61u: goto tr11;
-	}
-	goto tr9;
-case 5:
-	switch( (*p) ) {
-		case 9u: goto tr13;
-		case 10u: goto tr14;
-		case 13u: goto tr15;
-		case 32u: goto tr13;
-	}
-	goto tr12;
-case 6:
-	switch( (*p) ) {
-		case 10u: goto tr14;
-		case 13u: goto tr15;
-	}
-	goto tr12;
-case 14:
-	goto tr10;
-case 7:
-	if ( (*p) == 10u )
-		goto tr14;
-	goto tr10;
-case 8:
-	switch( (*p) ) {
-		case 10u: goto tr17;
-		case 13u: goto tr18;
-	}
-	goto tr16;
-case 15:
-	goto tr19;
-case 9:
-	if ( (*p) == 10u )
-		goto tr17;
-	goto tr19;
-case 10:
-	switch( (*p) ) {
-		case 10u: goto tr21;
-		case 13u: goto tr22;
-	}
-	goto tr20;
-case 16:
-	goto tr23;
-case 11:
-	if ( (*p) == 10u )
-		goto tr21;
-	goto tr23;
-	}
-
-	tr23: cs = 0; goto _again;
-	tr0: cs = 0; goto f0;
-	tr5: cs = 0; goto f4;
-	tr10: cs = 0; goto f7;
-	tr19: cs = 0; goto f11;
-	tr1: cs = 1; goto _again;
-	tr6: cs = 2; goto _again;
-	tr7: cs = 3; goto f5;
-	tr9: cs = 4; goto f8;
-	tr13: cs = 5; goto _again;
-	tr11: cs = 5; goto f9;
-	tr12: cs = 6; goto f10;
-	tr15: cs = 7; goto _again;
-	tr16: cs = 8; goto _again;
-	tr18: cs = 9; goto _again;
-	tr20: cs = 10; goto _again;
-	tr22: cs = 11; goto _again;
-	tr2: cs = 12; goto f1;
-	tr3: cs = 12; goto f2;
-	tr4: cs = 12; goto f3;
-	tr8: cs = 13; goto f6;
-	tr14: cs = 14; goto f10;
-	tr17: cs = 15; goto f12;
-	tr21: cs = 16; goto f13;
-
-	f5: _acts = _ini_actions + 1; goto execFuncs;
-	f6: _acts = _ini_actions + 3; goto execFuncs;
-	f4: _acts = _ini_actions + 5; goto execFuncs;
-	f1: _acts = _ini_actions + 7; goto execFuncs;
-	f8: _acts = _ini_actions + 9; goto execFuncs;
-	f9: _acts = _ini_actions + 11; goto execFuncs;
-	f10: _acts = _ini_actions + 13; goto execFuncs;
-	f7: _acts = _ini_actions + 15; goto execFuncs;
-	f12: _acts = _ini_actions + 17; goto execFuncs;
-	f11: _acts = _ini_actions + 19; goto execFuncs;
-	f13: _acts = _ini_actions + 21; goto execFuncs;
-	f0: _acts = _ini_actions + 23; goto execFuncs;
-	f3: _acts = _ini_actions + 25; goto execFuncs;
-	f2: _acts = _ini_actions + 28; goto execFuncs;
-
-execFuncs:
-	_nacts = *_acts++;
-	while ( _nacts-- > 0 ) {
-		switch ( *_acts++ ) {
-	case 0:
-/* #line 130 "ini_parser.rl" */
-	{
-			buff_i = 0;
-			{cs = 2;goto _again;}
-		}
-	break;
-	case 1:
-/* #line 135 "ini_parser.rl" */
-	{
-			if (buff_i >= INI_KEY_MAX) {
-				ini_parser_error("Section name too long");
-				{cs = 10;goto _again;}
-			}
-			keybuf[buff_i++] = (*p);
-		}
-	break;
-	case 2:
-/* #line 143 "ini_parser.rl" */
-	{
-			// we need a separate buffer for the result, otherwise a failed
-			// partial parse would corrupt the section string
-			rtrim_buf(keybuf, buff_i);
-			for (i = 0; (c = keybuf[i]) != 0; i++) secbuf[i] = c;
-			secbuf[i] = 0;
-			{cs = 1;goto _again;}
-		}
-	break;
-	case 3:
-/* #line 155 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in [section]");
-				if((*p) == '\n') {cs = 1;goto _again;} else {cs = 10;goto _again;}
-			}
-	break;
-	case 4:
-/* #line 162 "ini_parser.rl" */
-	{
-			buff_i = 0;
-			keybuf[buff_i++] = (*p); // add the first char
-			{cs = 4;goto _again;}
-		}
-	break;
-	case 5:
-/* #line 168 "ini_parser.rl" */
-	{
-			if (buff_i >= INI_KEY_MAX) {
-				ini_parser_error("Key too long");
-				{cs = 10;goto _again;}
-			}
-			keybuf[buff_i++] = (*p);
-		}
-	break;
-	case 6:
-/* #line 176 "ini_parser.rl" */
-	{
-			rtrim_buf(keybuf, buff_i);
-
-			// --- Value begin ---
-			buff_i = 0;
-			value_quote = 0;
-			value_nextesc = false;
-		}
-	break;
-	case 7:
-/* #line 185 "ini_parser.rl" */
-	{
-			isnl = ((*p) == '\r' || (*p) == '\n');
-			isquot = ((*p) == '\'' || (*p) == '"');
-
-			// detect our starting quote
-			if (isquot && !value_nextesc && buff_i == 0 && value_quote == 0) {
-				value_quote = (*p);
-				goto valueCharDone;
-			}
-
-			if (buff_i >= INI_VALUE_MAX) {
-				ini_parser_error("Value too long");
-				{cs = 10;goto _again;}
-			}
-
-			// end of string - clean up and report
-			if ((!value_nextesc && (*p) == value_quote) || isnl) {
-				if (isnl && value_quote) {
-					ini_parser_error("Unterminated string");
-					{cs = 1;goto _again;}
-				}
-
-				// unquoted: trim from the end
-				if (!value_quote) {
-					rtrim_buf(valbuf, buff_i);
-				} else {
-					valbuf[buff_i] = 0;
-				}
-
-				if (keyCallback) {
-					keyCallback(secbuf, keybuf, valbuf, userdata);
-				}
-
-				// we don't want to discard to eol if the string was terminated by eol
-				// - would delete the next line
-
-				if (isnl) {cs = 1;goto _again;} else {cs = 10;goto _again;}
-			}
-
-			c = (*p);
-			// escape...
-			if (value_nextesc) {
-				if ((*p) == 'n') c = '\n';
-				else if ((*p) == 'r') c = '\r';
-				else if ((*p) == 't') c = '\t';
-				else if ((*p) == 'e') c = '\033';
-			}
-
-			// collecting characters...
-			if (value_nextesc || (*p) != '\\') { // is quoted, or is not a quoting backslash - literal character
-				valbuf[buff_i++] = c;
-			}
-
-			value_nextesc = (!value_nextesc && (*p) == '\\');
-valueCharDone:;
-		}
-	break;
-	case 8:
-/* #line 247 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in key=value");
-				if((*p) == '\n') {cs = 1;goto _again;} else {cs = 10;goto _again;}
-			}
-	break;
-	case 9:
-/* #line 257 "ini_parser.rl" */
-	{ {cs = 1;goto _again;} }
-	break;
-	case 10:
-/* #line 258 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in comment");
-				if((*p) == '\n') {cs = 1;goto _again;} else {cs = 10;goto _again;}
-			}
-	break;
-	case 11:
-/* #line 265 "ini_parser.rl" */
-	{ {cs = 1;goto _again;} }
-	break;
-	case 12:
-/* #line 273 "ini_parser.rl" */
-	{ {cs = 8;goto _again;} }
-	break;
-	case 13:
-/* #line 276 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in root");
-				{cs = 10;goto _again;}
-			}
-	break;
-/* #line 458 "ini_parser.c" */
-		}
-	}
-	goto _again;
-
-_again:
-	if ( cs == 0 )
-		goto _out;
-	if ( ++p != pe )
-		goto _resume;
-	_test_eof: {}
-	if ( p == eof )
-	{
-	const char *__acts = _ini_actions + _ini_eof_actions[cs];
-	unsigned int __nacts = (unsigned int) *__acts++;
-	while ( __nacts-- > 0 ) {
-		switch ( *__acts++ ) {
-	case 3:
-/* #line 155 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in [section]");
-				if((*p) == '\n') {cs = 1;	if ( p == pe )
-		goto _test_eof;
-goto _again;} else {cs = 10;	if ( p == pe )
-		goto _test_eof;
-goto _again;}
-			}
-	break;
-	case 8:
-/* #line 247 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in key=value");
-				if((*p) == '\n') {cs = 1;	if ( p == pe )
-		goto _test_eof;
-goto _again;} else {cs = 10;	if ( p == pe )
-		goto _test_eof;
-goto _again;}
-			}
-	break;
-	case 10:
-/* #line 258 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in comment");
-				if((*p) == '\n') {cs = 1;	if ( p == pe )
-		goto _test_eof;
-goto _again;} else {cs = 10;	if ( p == pe )
-		goto _test_eof;
-goto _again;}
-			}
-	break;
-	case 13:
-/* #line 276 "ini_parser.rl" */
-	{
-				ini_parser_error("Syntax error in root");
-				{cs = 10;	if ( p == pe )
-		goto _test_eof;
-goto _again;}
-			}
-	break;
-/* #line 517 "ini_parser.c" */
-		}
-	}
-	}
-
-	_out: {}
-	}
-
-/* #line 283 "ini_parser.rl" */
-
+    nini.state = NINI_IDLE;
 }

utils/ini_parser.h

@@ -1,6 +1,5 @@
 //
-// INI file parser with a FSM generated by Ragel. This was originally written for ESPTerm
-// Used to extract sections, keys and values from user-provided settings file
+// INI file parser. Used to extract sections, keys and values from user-provided settings file
 //
 
 #ifndef INIPARSE_STREAM_H
@@ -8,13 +7,6 @@
 
 #include "platform.h"
 
-// toggleable logging func
-#ifdef DEBUG_INI
-#define ini_error(fmt, ...) dbg("! INI err: "#fmt, ##__VA_ARGS__)
-#else
-#define ini_error(fmt, ...)
-#endif
-
 // buffer sizes
 //#define INI_KEY_MAX 20
 //#define INI_VALUE_MAX 30 // moved to plat_compat.h

utils/ini_parser.rl

@@ -1,284 +0,0 @@
-
-/* Ragel constants block */
-#include "ini_parser.h"
-
-// Ragel setup
-%%{
-	machine ini;
-	write data;
-	alphtype unsigned char;
-}%%
-
-// Persistent state
-static int8_t cs = -1; //!< Ragel's Current State variable
-static uint32_t buff_i = 0; //!< Write pointer for the buffers
-static char value_quote = 0; //!< Quote character of the currently collected value
-static bool value_nextesc = false; //!< Next character is escaped, trated specially, and if quote, as literal quote character
-static IniParserCallback keyCallback = NULL; //!< Currently assigned callback
-static void *userdata = NULL; //!< Currently assigned user data for the callback
-
-// Buffers
-static char keybuf[INI_KEY_MAX];
-static char secbuf[INI_KEY_MAX];
-static char valbuf[INI_VALUE_MAX];
-
-// See header for doxygen!
-
-void
-ini_parse_reset_partial(void)
-{
-	buff_i = 0;
-	value_quote = 0;
-	value_nextesc = false;
-}
-
-void
-ini_parse_reset(void)
-{
-	ini_parse_reset_partial();
-	keybuf[0] = secbuf[0] = valbuf[0] = 0;
-	%% write init;
-}
-
-void
-ini_parser_error(const char* msg)
-{
-	ini_error("Parser error: %s", msg);
-	ini_parse_reset_partial();
-}
-
-
-void
-ini_parse_begin(IniParserCallback callback, void *userData)
-{
-	keyCallback = callback;
-	userdata = userData;
-	ini_parse_reset();
-}
-
-
-void
-*ini_parse_end(void)
-{
-	ini_parse("\n", 1);
-	if (keyCallback) {
-		keyCallback = NULL;
-	}
-
-	void *ud = userdata;
-	userdata = NULL;
-	return ud;
-}
-
-
-void
-ini_parse_file(const char *text, size_t len, IniParserCallback callback, void *userData)
-{
-	ini_parse_begin(callback, userData);
-	ini_parse(text, len);
-	ini_parse_end();
-}
-
-static void
-rtrim_buf(char *buf, int32_t end)
-{
-	if (end > 0) {
-		while ((uint8_t)buf[--end] < 33);
-		end++; // go past the last character
-	}
-
-	buf[end] = 0;
-}
-
-
-void
-ini_parse(const char *newstr, size_t len)
-{
-	int32_t i;
-	char c;
-	bool isnl;
-	bool isquot;
-
-	// Load new data to Ragel vars
-	const uint8_t *p;
-	const uint8_t *eof;
-	const uint8_t *pe;
-
-	if (len == 0) while(newstr[++len] != 0); // alternative to strlen
-
-	p = (const uint8_t *) newstr;
-	eof = NULL;
-	pe = (const uint8_t *) (newstr + len);
-
-	// Init Ragel on the first run
-	if (cs == -1) {
-		ini_parse_reset();
-	}
-
-	// The parser
-	%%{
-#/ *
-		ispace = [ \t]; # inline space
-		wchar  = any - 0..8 - 10..31;
-		#apos  = '\'';
-		#quot  = '\"';
-		nonl   = [^\r\n];
-		nl     = '\r'? '\n';
-
-		# ---- [SECTION] ----
-
-		action sectionStart {
-			buff_i = 0;
-			fgoto section;
-		}
-
-		action sectionChar {
-			if (buff_i >= INI_KEY_MAX) {
-				ini_parser_error("Section name too long");
-				fgoto discard2eol;
-			}
-			keybuf[buff_i++] = fc;
-		}
-
-		action sectionEnd {
-			// we need a separate buffer for the result, otherwise a failed
-			// partial parse would corrupt the section string
-			rtrim_buf(keybuf, buff_i);
-			for (i = 0; (c = keybuf[i]) != 0; i++) secbuf[i] = c;
-			secbuf[i] = 0;
-			fgoto main;
-		}
-
-		section :=
-			(
-				ispace* <: ((wchar - ']')+ @sectionChar) ']' @sectionEnd
-			) $!{
-				ini_parser_error("Syntax error in [section]");
-				if(fc == '\n') fgoto main; else fgoto discard2eol;
-			};
-
-		# ---- KEY=VALUE ----
-
-		action keyStart {
-			buff_i = 0;
-			keybuf[buff_i++] = fc; // add the first char
-			fgoto keyvalue;
-		}
-
-		action keyChar {
-			if (buff_i >= INI_KEY_MAX) {
-				ini_parser_error("Key too long");
-				fgoto discard2eol;
-			}
-			keybuf[buff_i++] = fc;
-		}
-
-		action keyEnd {
-			rtrim_buf(keybuf, buff_i);
-
-			// --- Value begin ---
-			buff_i = 0;
-			value_quote = 0;
-			value_nextesc = false;
-		}
-
-		action valueChar {
-			isnl = (fc == '\r' || fc == '\n');
-			isquot = (fc == '\'' || fc == '"');
-
-			// detect our starting quote
-			if (isquot && !value_nextesc && buff_i == 0 && value_quote == 0) {
-				value_quote = fc;
-				goto valueCharDone;
-			}
-
-			if (buff_i >= INI_VALUE_MAX) {
-				ini_parser_error("Value too long");
-				fgoto discard2eol;
-			}
-
-			// end of string - clean up and report
-			if ((!value_nextesc && fc == value_quote) || isnl) {
-				if (isnl && value_quote) {
-					ini_parser_error("Unterminated string");
-					fgoto main;
-				}
-
-				// unquoted: trim from the end
-				if (!value_quote) {
-					rtrim_buf(valbuf, buff_i);
-				} else {
-					valbuf[buff_i] = 0;
-				}
-
-				if (keyCallback) {
-					keyCallback(secbuf, keybuf, valbuf, userdata);
-				}
-
-				// we don't want to discard to eol if the string was terminated by eol
-				// - would delete the next line
-
-				if (isnl) fgoto main; else fgoto discard2eol;
-			}
-
-			c = fc;
-			// escape...
-			if (value_nextesc) {
-				if (fc == 'n') c = '\n';
-				else if (fc == 'r') c = '\r';
-				else if (fc == 't') c = '\t';
-				else if (fc == 'e') c = '\033';
-			}
-
-			// collecting characters...
-			if (value_nextesc || fc != '\\') { // is quoted, or is not a quoting backslash - literal character
-				valbuf[buff_i++] = c;
-			}
-
-			value_nextesc = (!value_nextesc && fc == '\\');
-valueCharDone:;
-		}
-
-		# use * for key, first char is already consumed.
-		keyvalue :=
-			(
-				([^\n=:]* @keyChar %keyEnd)
-				[=:] ispace* <: nonl* @valueChar nl @valueChar
-			) $!{
-				ini_parser_error("Syntax error in key=value");
-				if(fc == '\n') fgoto main; else fgoto discard2eol;
-			};
-
-		# ---- COMMENT ----
-
-		comment :=
-			(
-				nonl* nl
-				@{ fgoto main; }
-			) $!{
-				ini_parser_error("Syntax error in comment");
-				if(fc == '\n') fgoto main; else fgoto discard2eol;
-			};
-
-		# ---- CLEANUP ----
-
-		discard2eol := nonl* nl @{ fgoto main; };
-
-		# ---- ROOT ----
-
-		main :=
-			(space*
-				(
-					'[' @sectionStart |
-					[#;] @{ fgoto comment; } |
-					(wchar - [\t =:]) @keyStart
-				)
-			) $!{
-				ini_parser_error("Syntax error in root");
-				fgoto discard2eol;
-			};
-
-		write exec;
-#*/
-	}%%
-}

utils/ini_writer.c

@@ -119,6 +119,25 @@ void iw_entry(IniWriter *iw, const char *key, const char *format, ...)
     iw_newline(iw);	// one newline after entry
 }
 
+void iw_entry_s(IniWriter *iw, const char *key, const char *value)
+{
+    if (iw->count == 0) return;
+    iw_string(iw, key);
+    iw_string(iw, "=");
+    iw_string(iw, value);
+    iw_newline(iw);
+}
+
+void iw_entry_d(IniWriter *iw, const char *key, int32_t value)
+{
+    if (iw->count == 0) return;
+    iw_string(iw, key);
+    iw_string(iw, "=");
+    uint32_t len = (int)fixup_snprintf(&iwbuffer[0], IWBUFFER_LEN, "%d", value);
+    iw_buff(iw, (uint8_t *) iwbuffer, len);
+    iw_newline(iw);
+}
+
 uint32_t iw_measure_total(void (*handler)(IniWriter *), uint32_t tag)
 {
     IniWriter iw = iw_init(NULL, 0xFFFFFFFF, 1);

utils/ini_writer.h

@@ -126,6 +126,9 @@ __attribute__((format(printf,2,3)));
 void iw_entry(IniWriter *iw, const char *key, const char *format, ...)
     __attribute__((format(printf,3,4)));
 
+void iw_entry_s(IniWriter *iw, const char *key, const char *value);
+void iw_entry_d(IniWriter *iw, const char *key, int32_t value);
+
 /**
  * Measure total ini writer length using a dummy write
  *

utils/payload_parser.c

@@ -1,3 +1,4 @@
+#include <debug.h>
 #include "payload_parser.h"
 
 #define pp_check_capacity(pp, needed) \
@@ -58,32 +59,21 @@ uint32_t pp_u32(PayloadParser *pp)
 
 uint64_t pp_u64(PayloadParser *pp)
 {
-    pp_check_capacity(pp, 4);
+    pp_check_capacity(pp, 8);
     if (!pp->ok) return 0;
 
-    uint64_t x = 0;
+    uint32_t x0, x1;
+    uint64_t x;
 
     if (pp->bigendian) {
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 56);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 48);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 40);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 32);
-
-        x |= (uint64_t) (*pp->current++ << 24);
-        x |= (uint64_t) (*pp->current++ << 16);
-        x |= (uint64_t) (*pp->current++ << 8);
-        x |= *pp->current++;
+        x1 = pp_u32(pp);
+        x0 = pp_u32(pp);
     } else {
-        x |= *pp->current++;
-        x |= (uint64_t) (*pp->current++ << 8);
-        x |= (uint64_t) (*pp->current++ << 16);
-        x |= (uint64_t) (*pp->current++ << 24);
-
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 32);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 40);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 48);
-        x |= (uint64_t) ((uint64_t) *pp->current++ << 56);
+        x0 = pp_u32(pp);
+        x1 = pp_u32(pp);
     }
+    x = ((uint64_t)x1)<<32 | x0;
+
     return x;
 }
 

vfs/vfs_user.c

@@ -68,7 +68,7 @@ static uint32_t read_file_pinout_txt(uint32_t sector_offset, uint8_t *data, uint
 
 void vfs_user_build_filesystem(void)
 {
-    dbg("Rebuilding VFS...");
+    vfs_printf("Rebuilding VFS...");
 
     // Setup the filesystem based on target parameters
     vfs_init(daplink_drive_name, 0/*unused "disk size"*/);