i2c write works

framework/unit.c

@@ -6,7 +6,7 @@
 #include "unit.h"
 #include "resources.h"
 
-char unit_tmp64[64];
+char unit_tmp512[512];
 
 // Abort partly inited unit
 void clean_failed_unit(Unit *unit)

framework/unit.h

@@ -11,7 +11,8 @@
 #include "utils/payload_builder.h"
 #include "utils/payload_parser.h"
 
-extern char unit_tmp64[64]; // temporary static buffer
+extern char unit_tmp512[512]; // temporary static buffer - not expected to be accessed asynchronously
+// TODO add mutex?
 
 typedef struct unit Unit;
 typedef struct unit_driver UnitDriver;

gex.mk

@@ -81,10 +81,10 @@ else
 GEX_CDEFS = $(GEX_CDEFS_BASE) \
     -DUSE_FULL_ASSERT=1 \
     -DVERBOSE_ASSERT=1 \
-    -DDEBUG_VFS=1 \
+    -DDEBUG_VFS=0 \
-    -DDEBUG_FLASH_WRITE=1 \
+    -DDEBUG_FLASH_WRITE=0 \
     -DVERBOSE_HARDFAULT=1 \
-    -DUSE_STACK_MONITOR=1 \
+    -DUSE_STACK_MONITOR=0 \
     -DUSE_DEBUG_UART=1
 
 endif

units/digital_in/unit_din.c

@@ -85,13 +85,13 @@ static void DI_writeIni(Unit *unit, IniWriter *iw)
     iw_entry(iw, "port", "%c", priv->port_name);
 
     iw_comment(iw, "Pins (comma separated, supports ranges)");
-    iw_entry(iw, "pins", "%s", str_pinmask(priv->pins, unit_tmp64));
+    iw_entry(iw, "pins", "%s", str_pinmask(priv->pins, unit_tmp512));
 
     iw_comment(iw, "Pins with pull-up");
-    iw_entry(iw, "pull-up", "%s", str_pinmask(priv->pullup, unit_tmp64));
+    iw_entry(iw, "pull-up", "%s", str_pinmask(priv->pullup, unit_tmp512));
 
     iw_comment(iw, "Pins with pull-down");
-    iw_entry(iw, "pull-down", "%s", str_pinmask(priv->pulldown, unit_tmp64));
+    iw_entry(iw, "pull-down", "%s", str_pinmask(priv->pulldown, unit_tmp512));
 
 #if PLAT_NO_FLOATING_INPUTS
     iw_comment(iw, "NOTE: Pins use pull-up by default.\r\n");
@@ -206,9 +206,9 @@ static bool DI_handleRequest(Unit *unit, TF_ID frame_id, uint8_t command, Payloa
 
     switch (command) {
         case CMD_READ:;
-            PayloadBuilder pb = pb_start((uint8_t*)unit_tmp64, 64, NULL);
+            PayloadBuilder pb = pb_start((uint8_t*)unit_tmp512, 64, NULL);
             pb_u16(&pb, packed);
-            com_respond_buf(frame_id, MSG_SUCCESS, (uint8_t *) unit_tmp64, pb_length(&pb));
+            com_respond_buf(frame_id, MSG_SUCCESS, (uint8_t *) unit_tmp512, pb_length(&pb));
             break;
 
         default:

units/digital_out/unit_dout.c

@@ -81,13 +81,13 @@ static void DO_writeIni(Unit *unit, IniWriter *iw)
     iw_entry(iw, "port", "%c", priv->port_name);
 
     iw_comment(iw, "Pins (comma separated, supports ranges)");
-    iw_entry(iw, "pins", "%s", str_pinmask(priv->pins, unit_tmp64));
+    iw_entry(iw, "pins", "%s", str_pinmask(priv->pins, unit_tmp512));
 
     iw_comment(iw, "Initially high pins");
-    iw_entry(iw, "initial", "%s", str_pinmask(priv->initial, unit_tmp64));
+    iw_entry(iw, "initial", "%s", str_pinmask(priv->initial, unit_tmp512));
 
     iw_comment(iw, "Open-drain pins");
-    iw_entry(iw, "opendrain", "%s", str_pinmask(priv->open_drain, unit_tmp64));
+    iw_entry(iw, "opendrain", "%s", str_pinmask(priv->open_drain, unit_tmp512));
 }
 
 // ------------------------------------------------------------------------

units/i2c/unit_i2c.c

@@ -17,6 +17,10 @@ struct priv {
     uint8_t speed; //!< 0 - Standard, 1 - Fast, 2 - Fast+
 
     I2C_TypeDef *periph;
+
+    GPIO_TypeDef *port;
+    uint32_t ll_pin_scl;
+    uint32_t ll_pin_sda;
 };
 
 // ------------------------------------------------------------------------
@@ -146,8 +150,92 @@ static bool UI2C_init(Unit *unit)
         priv->periph = I2C2;
     }
 
-    // TODO claim pins (config option to remap?)
+    // This is written for F072, other platforms will need adjustments
+
+    char portname;
+    uint8_t pin_scl;
+    uint8_t pin_sda;
+    uint32_t af_i2c;
+    uint32_t timing; // magic constant from CubeMX
+
+#if GEX_PLAT_F072_DISCOVERY
+    // scl - 6 or 8 for I2C1, 10 for I2C2
+    // sda - 7 or 9 for I2C1, 11 for I2C2
+    portname = 'B';
+
+    if (priv->periph_num == 1) {
+        pin_scl = 8;
+        pin_sda = 9;
+    } else {
+        pin_scl = 10;
+        pin_sda = 12;
+    }
+
+    af_i2c = LL_GPIO_AF_1;
+    if (priv->speed == 1)
+        timing = 0x00301D2B; // Standard
+    else if (priv->speed == 2)
+        timing = 0x0000020B; // Fast
+    else
+        timing = 0x00000001; // Fast+
+
+#elif GEX_PLAT_F103_BLUEPILL
+    #error "NO IMPL"
+#elif GEX_PLAT_F303_DISCOVERY
+    #error "NO IMPL"
+#elif GEX_PLAT_F407_DISCOVERY
+    #error "NO IMPL"
+#else
+    #error "BAD PLATFORM!"
+#endif
+
+    // first, we have to claim the pins
+    Resource r_sda = pin2resource(portname, pin_sda, &suc);
+    Resource r_scl = pin2resource(portname, pin_scl, &suc);
+    CHECK_SUC();
+    rsc_claim(unit, r_sda);
+    rsc_claim(unit, r_scl);
+    CHECK_SUC();
+
+    GPIO_TypeDef *port = port2periph(portname, &suc);
+    uint32_t ll_pin_scl = pin2ll(pin_scl, &suc);
+    uint32_t ll_pin_sda = pin2ll(pin_sda, &suc);
+    CHECK_SUC();
+
+    // configure AF
+    if (pin_scl < 8) LL_GPIO_SetAFPin_0_7(port, ll_pin_scl, af_i2c);
+    else LL_GPIO_SetAFPin_8_15(port, ll_pin_scl, af_i2c);
+
+    if (pin_sda < 8) LL_GPIO_SetAFPin_0_7(port, ll_pin_sda, af_i2c);
+    else LL_GPIO_SetAFPin_8_15(port, ll_pin_sda, af_i2c);
 
+    LL_GPIO_SetPinMode(port, ll_pin_scl, LL_GPIO_MODE_ALTERNATE);
+    LL_GPIO_SetPinMode(port, ll_pin_sda, LL_GPIO_MODE_ALTERNATE);
+
+    // set as OpenDrain (this may not be needed - TODO check)
+    LL_GPIO_SetPinOutputType(port, ll_pin_scl, LL_GPIO_OUTPUT_OPENDRAIN);
+    LL_GPIO_SetPinOutputType(port, ll_pin_sda, LL_GPIO_OUTPUT_OPENDRAIN);
+
+
+    if (priv->periph_num == 1) {
+        __HAL_RCC_I2C1_CLK_ENABLE();
+    } else {
+        __HAL_RCC_I2C2_CLK_ENABLE();
+    }
+
+    /* Disable the selected I2Cx Peripheral */
+    LL_I2C_Disable(priv->periph);
+    LL_I2C_ConfigFilters(priv->periph,
+                         priv->anf ? LL_I2C_ANALOGFILTER_ENABLE
+                                   : LL_I2C_ANALOGFILTER_DISABLE,
+                         priv->dnf);
+
+    LL_I2C_SetTiming(priv->periph, timing);
+    LL_I2C_DisableClockStretching(priv->periph);
+    LL_I2C_Enable(priv->periph);
+
+    LL_I2C_DisableOwnAddress1(priv->periph); // OA not used
+    LL_I2C_SetMode(priv->periph, LL_I2C_MODE_I2C); // not using SMBus
 
     return true;
 }
@@ -159,7 +247,16 @@ static void UI2C_deInit(Unit *unit)
 
     // de-init the pins & peripheral only if inited correctly
     if (unit->status == E_SUCCESS) {
-        // TODO
+        LL_I2C_DeInit(priv->periph);
+
+        if (priv->periph_num == 1) {
+            __HAL_RCC_I2C1_CLK_DISABLE();
+        } else {
+            __HAL_RCC_I2C2_CLK_DISABLE();
+        }
+
+        LL_GPIO_SetPinMode(priv->port, priv->ll_pin_sda, LL_GPIO_MODE_ANALOG);
+        LL_GPIO_SetPinMode(priv->port, priv->ll_pin_scl, LL_GPIO_MODE_ANALOG);
     }
 
     // Release all resources
@@ -177,18 +274,121 @@ enum PinCmd_ {
     CMD_READ = 1,
 };
 
+static void i2c_reset(struct priv *priv)
+{
+    LL_I2C_Disable(priv->periph);
+    HAL_Delay(1);
+    LL_I2C_Enable(priv->periph);
+}
+
+static bool i2c_wait_until_flag(struct priv *priv, TF_ID frame_id, uint32_t flag,
+                                bool stop_state, const char *msg)
+{
+    uint32_t t_start = HAL_GetTick();
+    while (((priv->periph->ISR & flag)!=0) != stop_state) {
+        if (HAL_GetTick() - t_start > 10) {
+            com_respond_err(frame_id, msg);
+            i2c_reset(priv);
+            return false;
+        }
+    }
+}
+
 /** Handle a request message */
 static bool UI2C_handleRequest(Unit *unit, TF_ID frame_id, uint8_t command, PayloadParser *pp)
 {
     struct priv *priv = unit->data;
 
+    uint8_t addrsize; // 7 or 10
+    uint16_t addr;
+    uint32_t len;
+    uint32_t t_start;
+
     switch (command) {
-        case CMD_WRITE:
+        case CMD_WRITE:;
-            //
+            addrsize = pp_u8(pp); // 7 or 10
+            addr = pp_u16(pp);
+
+            t_start = HAL_GetTick();
+            while (LL_I2C_IsActiveFlag_BUSY(priv->periph)) {
+                if (HAL_GetTick() - t_start > 10) {
+                    com_respond_err(frame_id, "BUSY TIMEOUT");
+                    i2c_reset(priv);
+                    return false;
+                }
+            }
+//            if (!i2c_wait_until_flag(priv, frame_id, I2C_ISR_BUSY, 0, "BUSY TIMEOUT")) return false;
+
+            uint32_t chunk_remain;
+            while (pp_length(pp) > 0) {
+                len = pp_length(pp);
+                chunk_remain = (uint8_t) ((len > 255) ? 255 : len), // if more than 255, first chunk is 255
+                LL_I2C_HandleTransfer(priv->periph,
+                                      (addrsize == 7) ? addr << 1 : addr, // Address must be shifted to left by one if 7-bit mode is used. Bit 0 serves for R/W flag
+                                      (addrsize == 7) ? LL_I2C_ADDRSLAVE_7BIT : LL_I2C_ADDRSLAVE_10BIT, // translate to LL bitfields
+                                      (uint32_t) chunk_remain,
+                                      (len > 255) ? LL_I2C_MODE_RELOAD : LL_I2C_MODE_AUTOEND, // Autoend if this is the last chunk
+                                      LL_I2C_GENERATE_START_WRITE);
+
+                for (; chunk_remain > 0; chunk_remain--) {
+                    t_start = HAL_GetTick();
+                    while (!LL_I2C_IsActiveFlag_TXIS(priv->periph)) {
+                        if (HAL_GetTick() - t_start > 10) {
+                            com_respond_err(frame_id, "TXIS TIMEOUT");
+                            i2c_reset(priv);
+                            return false;
+                        }
+                    }
+
+                    uint8_t byte = pp_u8(pp);
+                    LL_I2C_TransmitData8(priv->periph, byte);
+                }
+            }
+
+            t_start = HAL_GetTick();
+            while (!LL_I2C_IsActiveFlag_STOP(priv->periph)) {
+                if (HAL_GetTick() - t_start > 10) {
+                    com_respond_err(frame_id, "STOPF TIMEOUT");
+                    i2c_reset(priv);
+                    return false;
+                }
+            }
+
             break;
 
         case CMD_READ:
-            //
+            addrsize = pp_u8(pp); // 7 or 10
+            addr = pp_u16(pp);
+            len = pp_u16(pp);
+
+            // TODO support > 255?
+            if (len > 256) {
+                com_respond_err(frame_id, "TOO LONG");
+                return false;
+            }
+
+            LL_I2C_HandleTransfer(priv->periph,
+                                  (addrsize == 7) ? addr << 1 : addr,
+                                  addrsize == 7 ? LL_I2C_ADDRSLAVE_7BIT : LL_I2C_ADDRSLAVE_10BIT,
+                                  (uint32_t) pp_length(pp),
+                                  LL_I2C_MODE_AUTOEND, // ?
+                                  LL_I2C_GENERATE_START_READ);
+
+            for (uint32_t i = 0; i < len; i++) {
+                t_start = HAL_GetTick();
+                while (!LL_I2C_IsActiveFlag_RXNE(priv->periph)) {
+                    // wait for RXNE
+                    if (HAL_GetTick() - t_start > 10) {
+                        com_respond_err(frame_id, "RX TIMEOUT");
+                        return false;
+                    }
+                }
+
+                uint8_t b = LL_I2C_ReceiveData8(priv->periph);
+                unit_tmp512[i] = b;
+            }
+
+            com_respond_buf(frame_id, MSG_SUCCESS, (uint8_t *) unit_tmp512, len);
             break;
 
         default:

utils/payload_parser.h

@@ -66,7 +66,7 @@ struct PayloadParser_ {
 // --- utilities ---
 
 /** Get remaining length */
-#define pp_length(pp) ((pp)->end - (pp)->current)
+#define pp_length(pp) (uint32_t)((pp)->end - (pp)->current)
 
 /** Reset the current pointer to start */
 #define pp_rewind(pp) do { pp->current = pp->start; } while (0)

vfs/file_stream.c

@@ -219,10 +219,10 @@ static error_t write_conf(void *state, const uint8_t *data, uint32_t size)
     conf_state_t *conf = state;
     conf->file_pos += size;
 
-    vfs_printf("Writing INI - RX %d bytes", size);
+    vfs_printf("Writing INI - RX %d bytes", (int)size);
-    vfs_printf_nonl("\033[92m", 5);
+    vfs_puts("\033[92m");
-    vfs_printf_nonl((const char *) data, size);
+    vfs_putsn((const char *) data, size);
-    vfs_printf_nonl("\033[0m\r\n", 6);
+    vfs_puts("\033[0m\r\n");
 
     ini_parse((const char *) data, size);
 
@@ -233,7 +233,7 @@ static error_t write_conf(void *state, const uint8_t *data, uint32_t size)
 static error_t close_conf(void *state)
 {
     conf_state_t *conf = state;
-    vfs_printf("Close INI, total bytes = %d", conf->file_pos);
+    vfs_printf("Close INI, total bytes = %d", (int)conf->file_pos);
 
     ini_parse_end();
     settings_load_ini_end();

vfs/vfs_manager.c

@@ -134,7 +134,7 @@ static void transfer_update_state(error_t status);
 void vfs_mngr_fs_enable(bool enable)
 {
     sync_lock();
-    vfs_printf("Enable = %d", enable);
+    vfs_printf("Enable = %d", (int)enable);
 
     if (enable) {
         if (VFS_MNGR_STATE_DISCONNECTED == vfs_state_next) {
@@ -208,8 +208,8 @@ void vfs_mngr_periodic(uint32_t elapsed_ms)
     }
 
     vfs_printf("vfs_mngr_periodic()\r\n");
-    vfs_printf("   time_usb_idle=%i\r\n", time_usb_idle);
+    vfs_printf("   time_usb_idle=%i\r\n", (int)time_usb_idle);
-    vfs_printf("   transfer_state=%i\r\n", file_transfer_state.transfer_state);
+    vfs_printf("   transfer_state=%i\r\n", (int)file_transfer_state.transfer_state);
     // Transition to new state
     vfs_state_local_prev = vfs_state;
     vfs_state = vfs_state_next;
@@ -229,7 +229,7 @@ void vfs_mngr_periodic(uint32_t elapsed_ms)
     time_usb_idle = 0;
     sync_unlock();
     // Processing when leaving a state
-    vfs_printf("    state %i->%i\r\n", vfs_state_local_prev, vfs_state_local);
+    vfs_printf("    state %i->%i\r\n", (int)vfs_state_local_prev, (int)vfs_state_local);
 
     bool want_notify_only = false; // Use this if the transfer timed out and we dont need full reconnect
     switch (vfs_state_local_prev) {
@@ -331,7 +331,7 @@ void vfs_if_usbd_msc_read_sect(uint32_t sector, uint8_t *buf, uint32_t num_of_se
 void vfs_if_usbd_msc_write_sect(uint32_t sector, uint8_t *buf, uint32_t num_of_sectors)
 {
     sync_assert_usb_thread();
-    vfs_printf("\033[32mWRITE @ %d, len %d\033[0m", sector, num_of_sectors);
+    vfs_printf("\033[32mWRITE @ %d, len %d\033[0m", (int)sector, (int)num_of_sectors);
     if (buf[0] == 0xF8 && buf[1] == 0xFF && buf[2] == 0xFF && buf[3] == 0xFF) {
         vfs_printf("Discard write of F8,FF,FF,FF");
         return;
@@ -428,7 +428,7 @@ static void switch_to_new_file(stream_type_t stream, uint32_t start_sector, bool
 // Callback to handle changes to the root directory.  Should be used with vfs_set_file_change_callback
 static void file_change_handler(const vfs_filename_t filename, vfs_file_change_t change, vfs_file_t file, vfs_file_t new_file_data)
 {
-    vfs_printf("\033[33m@file_change_handler\033[0m (name=%*s, file=%p, ftp=%p, change=%i)\r\n", 11, filename, file, change);
+    vfs_printf("\033[33m@file_change_handler\033[0m (name=%*s, file=%p, change=%i)\r\n", 11, filename, file, (int)change);
 
     vfs_user_file_change_handler(filename, change, file, new_file_data);
     if (TRASNFER_FINISHED == file_transfer_state.transfer_state) {
@@ -490,10 +490,10 @@ static void file_data_handler(uint32_t sector, const uint8_t *buf, uint32_t num_
 {
     stream_type_t stream;
     uint32_t size;
-    vfs_printf("\033[33m@file_data_handler\033[0m (sec=%d, num=%d)", sector, num_of_sectors);
+    vfs_printf("\033[33m@file_data_handler\033[0m (sec=%d, num=%d)", (int)sector, (int)num_of_sectors);
 
     if (sector <= 1) {
-        vfs_printf("Discard write to sector %d", sector);
+        vfs_printf("Discard write to sector %d", (int)sector);
         return;
     }
 
@@ -521,7 +521,7 @@ static void file_data_handler(uint32_t sector, const uint8_t *buf, uint32_t num_
 
         // sectors must be in order
         if (sector != file_transfer_state.file_next_sector) {
-            vfs_printf("file_data_handler BAD sector=%i\r\n", sector);
+            vfs_printf("file_data_handler BAD sector=%i\r\n", (int)sector);
 
             // Try to find what file this belongs to, if any
             // OS sometimes first writes the FAT and then the individual files,
@@ -544,7 +544,7 @@ static void file_data_handler(uint32_t sector, const uint8_t *buf, uint32_t num_
 
             if (sector >= file_transfer_state.start_sector && sector < file_transfer_state.file_next_sector) {
                 vfs_printf("    sector out of order! lowest ooo = %i\r\n",
-                           file_transfer_state.last_ooo_sector);
+                           (int)file_transfer_state.last_ooo_sector);
 
                 if (VFS_INVALID_SECTOR == file_transfer_state.last_ooo_sector) {
                     file_transfer_state.last_ooo_sector = sector;
@@ -572,12 +572,12 @@ static void file_data_handler(uint32_t sector, const uint8_t *buf, uint32_t num_
             }
 
             vfs_printf("    discarding data - size transferred=0x%x\r\n",
-                       file_transfer_state.size_transferred);
+                       (int)file_transfer_state.size_transferred);
 
-            vfs_printf_nonl("\033[31m", 5);
+            vfs_puts("\033[31m");
             // FIXME this seems wrong
-            vfs_printf_nonl((const char *) buf, VFS_SECTOR_SIZE * num_of_sectors);
+            vfs_putsn((const char *) buf, VFS_SECTOR_SIZE * num_of_sectors);
-            vfs_printf_nonl("\033[0m\r\n", 6);
+            vfs_puts("\033[0m\r\n");
 
             return;
         } else {
@@ -591,13 +591,13 @@ static void file_data_handler(uint32_t sector, const uint8_t *buf, uint32_t num_
 
         // If stream processing is done then discard the data
         if (file_transfer_state.stream_finished) {
-            vfs_printf("vfs_manager file_data_handler\r\n    sector=%i, size=%i\r\n", sector, size);
+            vfs_printf("vfs_manager file_data_handler\r\n    sector=%i, size=%i\r\n", (int)sector, (int)size);
             vfs_printf("    discarding data - size transferred=0x%x\r\n",
-                       file_transfer_state.size_transferred);
+                       (int)file_transfer_state.size_transferred);
 
-            vfs_printf_nonl("\033[31m", 5);
+            vfs_puts("\033[31m");
-            vfs_printf_nonl((const char *) buf, VFS_SECTOR_SIZE * num_of_sectors);
+            vfs_putsn((const char *) buf, VFS_SECTOR_SIZE * num_of_sectors);
-            vfs_printf_nonl("\033[0m\r\n", 6);
+            vfs_puts("\033[0m\r\n");
 
             transfer_update_state(E_SUCCESS);
             return;
@@ -671,7 +671,7 @@ void abort_remount(void)
 // Update the tranfer state with file information
 static void transfer_update_file_info(vfs_file_t file, uint32_t start_sector, uint32_t size, stream_type_t stream)
 {
-    vfs_printf("\033[33m@transfer_update_file_info\033[0m (file=%p, start_sector=%i, size=%i)\r\n", file, start_sector, size);
+    vfs_printf("\033[33m@transfer_update_file_info\033[0m (file=%p, start_sector=%i, size=%i)\r\n", file, (int)start_sector, (int)size);
 
     if (TRASNFER_FINISHED == file_transfer_state.transfer_state) {
         trap("xfer already finished");
@@ -692,7 +692,7 @@ static void transfer_update_file_info(vfs_file_t file, uint32_t start_sector, ui
         file_transfer_state.start_sector = start_sector;
 
         if (start_sector != VFS_INVALID_SECTOR) {
-            vfs_printf("    start_sector=%i\r\n", start_sector);
+            vfs_printf("    start_sector=%i\r\n", (int)start_sector);
         }
     }
 
@@ -701,13 +701,13 @@ static void transfer_update_file_info(vfs_file_t file, uint32_t start_sector, ui
         file_transfer_state.stream = stream;
 
         if (stream != STREAM_TYPE_NONE) {
-            vfs_printf("    stream=%i\r\n", stream);
+            vfs_printf("    stream=%i\r\n", (int)stream);
         }
     }
 
     // Check - File size must either grow or be smaller than the size already transferred
     if ((size < file_transfer_state.file_size) && (size < file_transfer_state.size_transferred)) {
-        vfs_printf("    error: file size changed from %i to %i\r\n", file_transfer_state.file_size, size);
+        vfs_printf("    error: file size changed from %i to %i\r\n", (int)file_transfer_state.file_size, (int)size);
         // this is probably a new file
         trap("File shrinks");//XXX
         switch_to_new_file(stream, start_sector, true);
@@ -715,7 +715,7 @@ static void transfer_update_file_info(vfs_file_t file, uint32_t start_sector, ui
 
     // Check - Starting sector must be the same  - this is optional for file info since it may not be present initially
     if ((VFS_INVALID_SECTOR != start_sector) && (start_sector != file_transfer_state.start_sector)) {
-        vfs_printf("    error: starting sector changed from %i to %i\r\n", file_transfer_state.start_sector, start_sector);
+        vfs_printf("    error: starting sector changed from %i to %i\r\n", (int)file_transfer_state.start_sector, (int)start_sector);
         // this is probably a new file
 
         dbg("WARN! Changed start offset");
@@ -733,7 +733,7 @@ static void transfer_update_file_info(vfs_file_t file, uint32_t start_sector, ui
 
     // Update values - Size is the only value that can change
     file_transfer_state.file_size = size;
-    vfs_printf("    updated size=%i\r\n", size);
+    vfs_printf("    updated size=%i\r\n", (int)size);
 
     transfer_update_state(E_SUCCESS);
 }
@@ -757,11 +757,11 @@ static void transfer_stream_open(stream_type_t stream, uint32_t start_sector)
     assert_param(!file_transfer_state.stream_open);
     assert_param(start_sector != VFS_INVALID_SECTOR);
     vfs_printf("\033[33m@transfer_stream_open\033[0m (stream=%i, start_sector=%i)\r\n",
-               stream, start_sector);
+               (int)stream, (int)start_sector);
 
     // Check - Starting sector must be the same
     if (start_sector != file_transfer_state.start_sector && file_transfer_state.start_sector != VFS_INVALID_SECTOR) {
-        vfs_printf("    error: starting sector changed from %i to %i\r\n", file_transfer_state.start_sector, start_sector);
+        vfs_printf("    error: starting sector changed from %i to %i\r\n", (int)file_transfer_state.start_sector, (int)start_sector);
         // this is probably a new file
         switch_to_new_file(stream, start_sector, false);
         file_transfer_state.start_sector = VFS_INVALID_SECTOR;
@@ -769,7 +769,7 @@ static void transfer_stream_open(stream_type_t stream, uint32_t start_sector)
 
     // Check - stream must be the same
     if (stream != file_transfer_state.stream && file_transfer_state.stream != STREAM_TYPE_NONE) {
-        vfs_printf("    error: changed types during tranfer from %i to %i\r\n", stream, file_transfer_state.stream);
+        vfs_printf("    error: changed types during tranfer from %i to %i\r\n", (int)stream, (int)file_transfer_state.stream);
         // this is probably a new file
         switch_to_new_file(stream, start_sector, false);
         file_transfer_state.start_sector = VFS_INVALID_SECTOR;
@@ -780,7 +780,7 @@ static void transfer_stream_open(stream_type_t stream, uint32_t start_sector)
         file_transfer_state.start_sector = start_sector;
 
         if (start_sector != VFS_INVALID_SECTOR) {
-            vfs_printf("    start_sector=%i\r\n", start_sector);
+            vfs_printf("    start_sector=%i\r\n", (int)start_sector);
         }
     }
 
@@ -789,13 +789,13 @@ static void transfer_stream_open(stream_type_t stream, uint32_t start_sector)
         file_transfer_state.stream = stream;
 
         if (stream != STREAM_TYPE_NONE) {
-            vfs_printf("    stream=%i\r\n", stream);
+            vfs_printf("    stream=%i\r\n", (int)stream);
         }
     }
 
     // Open stream
     status = stream_open(stream);
-    vfs_printf("    stream_open stream=%i ret %i\r\n", stream, status);
+    vfs_printf("    stream_open stream=%i ret %i\r\n", (int)stream, (int)status);
 
     if (E_SUCCESS == status) {
         file_transfer_state.file_next_sector = start_sector;
@@ -810,9 +810,9 @@ static void transfer_stream_open(stream_type_t stream, uint32_t start_sector)
 static void transfer_stream_data(uint32_t sector, const uint8_t *data, uint32_t size)
 {
     error_t status;
-    vfs_printf("\033[33m@transfer_stream_data\033[0m (sector=%i, size=%i)\r\n", sector, size);
+    vfs_printf("\033[33m@transfer_stream_data\033[0m (sector=%i, size=%i)\r\n", (int)sector, (int)size);
     vfs_printf("    size processed=0x%x, data=%x,%x,%x,%x,...\r\n",
-               file_transfer_state.size_processed, data[0], data[1], data[2], data[3]);
+               (int)file_transfer_state.size_processed, data[0], data[1], data[2], data[3]);
 
     if (file_transfer_state.stream_finished) {
         trap("Stream already closed");
@@ -822,13 +822,13 @@ static void transfer_stream_data(uint32_t sector, const uint8_t *data, uint32_t
     assert_param(size % VFS_SECTOR_SIZE == 0);
     assert_param(file_transfer_state.stream_open);
     status = stream_write((uint8_t *) data, size);
-    vfs_printf("    stream_write ret=%i\r\n", status);
+    vfs_printf("    stream_write ret=%i\r\n", (int)status);
 
     if (E_SUCCESS_DONE == status) {
         // Override status so E_SUCCESS_DONE
         // does not get passed into transfer_update_state
         status = stream_close();
-        vfs_printf("    stream_close ret=%i\r\n", status);
+        vfs_printf("    stream_close ret=%i\r\n", (int)status);
         file_transfer_state.stream_open = false;
         file_transfer_state.stream_finished = true;
         file_transfer_state.stream_optional_finish = true;
@@ -921,11 +921,11 @@ static void transfer_update_state(error_t status)
     if (TRASNFER_FINISHED == file_transfer_state.transfer_state) {
         vfs_printf("vfs_manager transfer_update_state(status=%i)\r\n", status);
         vfs_printf("    file=%p, start_sect= %i, size=%i\r\n",
-                   file_transfer_state.file_to_program, file_transfer_state.start_sector,
+                   file_transfer_state.file_to_program, (int)file_transfer_state.start_sector,
-                   file_transfer_state.file_size);
+                   (int)file_transfer_state.file_size);
         vfs_printf("    stream=%i, size_processed=%i, opt_finish=%i, timeout=%i\r\n",
-                   file_transfer_state.stream, file_transfer_state.size_processed,
+                   (int)file_transfer_state.stream, (int)file_transfer_state.size_processed,
-                   file_transfer_state.file_info_optional_finish, transfer_timeout);
+                   (int)file_transfer_state.file_info_optional_finish, (int)transfer_timeout);
 
         // Close the file stream if it is open
         if (file_transfer_state.stream_open) {

vfs/virtual_fs.c

@@ -555,7 +555,7 @@ void vfs_write(uint32_t requested_sector, const uint8_t *buf, uint32_t num_secto
 
     set_init_done();
 
-    vfs_printf("vfs_write - at sector %d, count %d", requested_sector, num_sectors);
+    vfs_printf("vfs_write - at sector %d, count %d", (int)requested_sector, (int)num_sectors);
     for (i = 0; i < virtual_media_idx; i++) {
         uint32_t vm_sectors = virtual_media[i].length / VFS_SECTOR_SIZE;
         uint32_t vm_start = current_sector;
@@ -582,7 +582,7 @@ void vfs_write(uint32_t requested_sector, const uint8_t *buf, uint32_t num_secto
         // Move to the next virtual media entry
         current_sector += vm_sectors;
     }
-    if (num_sectors > 0) vfs_printf("Failed to find place for writing, remain %d secs to write.", num_sectors);
+    if (num_sectors > 0) vfs_printf("Failed to find place for writing, remain %d secs to write.", (int)num_sectors);
 }
 
 static uint32_t read_zero(uint32_t sector_offset, uint8_t *data, uint32_t num_sectors)
@@ -788,7 +788,7 @@ static void set_init_done(void)
 
 bool vfs_find_file(uint32_t start_sector, vfs_filename_t *destFilename, vfs_file_t **destFile)
 {
-    vfs_printf("Looking for file at %d", start_sector);
+    vfs_printf("Looking for file at %d", (int)start_sector);
     for (int i = 0; i < 32; i++) {
         FatDirectoryEntry_t *f = &dir_current.f[i];
         if (f->attributes == VFS_FILE_ATTR_LFN) continue;

vfs/virtual_fs.h

@@ -31,9 +31,13 @@ extern "C" {
 #if DEBUG_VFS
 #define vfs_printf(...)  do { dbg(__VA_ARGS__); } while(0)
 #define vfs_printf_nonl(...)  do { PRINTF(__VA_ARGS__); } while(0)
+#define vfs_puts(buf)  do { PUTS(buf); } while(0)
+#define vfs_putsn(buf, n)  do { PUTSN(buf, n); } while(0)
 #else
 #define vfs_printf(...) do { } while(0)
 #define vfs_printf_nonl(...)  do { } while(0)
+#define vfs_puts(buf)  do { } while(0)
+#define vfs_putsn(buf, n)  do { } while(0)
 #endif
 
 #define VFS_CLUSTER_SIZE        0x1000