fixed the bug, caused by partly inited units trying to de-init pins

platform/lock_jumper.c

@@ -91,6 +91,7 @@ void LockJumper_Check(void)
 
     if (debo_ticks > 0) {
         if (--debo_ticks == 0) {
+            dbg("Debo finished, state %d", (int)state);
             // we've reached a change
             #if PLAT_LOCK_BTN
                 if (state == true) {

platform/status_led.c

@@ -106,8 +106,8 @@ void Indicator_Tick(void)
         else if (active_effect == STATUS_DISK_ATTACHED) {
             if (effect_time == 0) led_on();
             else if (effect_time == 100) led_off();
-            else if (effect_time == 200) led_on();
-            else if (effect_time == 700) {
+            else if (effect_time == 250) led_on();
+            else if (effect_time == 750) {
                 led_off();
                 active_effect = STATUS_NONE;
             }
@@ -115,8 +115,8 @@ void Indicator_Tick(void)
         else if (active_effect == STATUS_DISK_REMOVED) {
             if (effect_time == 0) led_on();
             else if (effect_time == 500) led_off();
-            else if (effect_time == 600) led_on();
-            else if (effect_time == 700) {
+            else if (effect_time == 650) led_on();
+            else if (effect_time == 750) {
                 led_off();
                 active_effect = STATUS_NONE;
             }

units/digital_in/unit_din.c

@@ -167,15 +167,17 @@ static void DI_deInit(Unit *unit)
 {
     struct priv *priv = unit->data;
 
-    bool suc = true;
-    uint16_t mask = 1;
-    for (int i = 0; i < 16; i++, mask <<= 1) {
-        if (priv->pins & mask) {
-            uint32_t ll_pin = pin2ll((uint8_t) i, &suc);
-            assert_param(suc); // this should never fail if we got this far
-
-            // configure the pin as analog
-            LL_GPIO_SetPinMode(priv->port, ll_pin, LL_GPIO_MODE_ANALOG);
+    if (unit->status == E_SUCCESS) {
+        bool suc = true;
+        uint16_t mask = 1;
+        for (int i = 0; i < 16; i++, mask <<= 1) {
+            if (priv->pins & mask) {
+                uint32_t ll_pin = pin2ll((uint8_t) i, &suc);
+                assert_param(suc); // this should never fail if we got this far
+
+                // configure the pin as analog
+                LL_GPIO_SetPinMode(priv->port, ll_pin, LL_GPIO_MODE_ANALOG);
+            }
         }
     }
 

units/digital_out/unit_dout.c

@@ -156,16 +156,19 @@ static void DO_deInit(Unit *unit)
 {
     struct priv *priv = unit->data;
 
-    bool suc = true;
-    uint16_t mask = 1;
-    for (int i = 0; i < 16; i++, mask <<= 1) {
-        if (priv->pins & mask) {
-
-            uint32_t ll_pin = pin2ll((uint8_t) i, &suc);
-            assert_param(suc); // this should never fail if we got this far
-
-            // configure the pin as analog
-            LL_GPIO_SetPinMode(priv->port, ll_pin, LL_GPIO_MODE_ANALOG);
+    // de-init the pins only if inited correctly
+    if (unit->status == E_SUCCESS) {
+        bool suc = true;
+        uint16_t mask = 1;
+        for (int i = 0; i < 16; i++, mask <<= 1) {
+            if (priv->pins & mask) {
+
+                uint32_t ll_pin = pin2ll((uint8_t) i, &suc);
+                assert_param(suc); // this should never fail if we got this far
+
+                // configure the pin as analog
+                LL_GPIO_SetPinMode(priv->port, ll_pin, LL_GPIO_MODE_ANALOG);
+            }
         }
     }
 

units/neopixel/unit_neopixel.c

@@ -125,8 +125,10 @@ static void Npx_deInit(Unit *unit)
 {
     struct priv *priv = unit->data;
 
-    // configure the pin as analog
-    LL_GPIO_SetPinMode(priv->port, priv->ll_pin, LL_GPIO_MODE_ANALOG);
+    if (unit->status == E_SUCCESS) {
+        // configure the pin as analog
+        LL_GPIO_SetPinMode(priv->port, priv->ll_pin, LL_GPIO_MODE_ANALOG);
+    }
 
     // Release all resources
     rsc_teardown(unit);