GEX core repository.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
gex-core/vfs/vfs_manager.c

954 lines
34 KiB

7 years ago
/**
* @file vfs_manager.c
* @brief Implementation of vfs_manager.h
*
* DAPLink Interface Firmware
* Copyright (c) 2009-2016, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "platform.h"
#include "task_main.h"
#include "virtual_fs.h"
#include "vfs_manager.h"
#include "file_stream.h"
#define INVALID_TIMEOUT_MS 0xFFFFFFFF
#define MAX_EVENT_TIME_MS 60000
#define CONNECT_DELAY_MS 0
#define RECONNECT_DELAY_MS 2500 // Must be above 1s for windows (more for linux)
// TRANSFER_IN_PROGRESS
#define DISCONNECT_DELAY_TRANSFER_TIMEOUT_MS 500 // was 20000 - this is triggered after a partial file upload
// TRANSFER_CAN_BE_FINISHED
#define DISCONNECT_DELAY_TRANSFER_IDLE_MS 500
// TRANSFER_NOT_STARTED || TRASNFER_FINISHED
#define DISCONNECT_DELAY_MS 500
bool vfs_is_windows = false;
7 years ago
// Make sure none of the delays exceed the max time
COMPILER_ASSERT(CONNECT_DELAY_MS < MAX_EVENT_TIME_MS);
COMPILER_ASSERT(RECONNECT_DELAY_MS < MAX_EVENT_TIME_MS);
COMPILER_ASSERT(DISCONNECT_DELAY_TRANSFER_TIMEOUT_MS < MAX_EVENT_TIME_MS);
COMPILER_ASSERT(DISCONNECT_DELAY_TRANSFER_IDLE_MS < MAX_EVENT_TIME_MS);
COMPILER_ASSERT(DISCONNECT_DELAY_MS < MAX_EVENT_TIME_MS);
volatile vfs_info_t vfs_info;
typedef enum {
TRANSFER_NOT_STARTED,
TRANSFER_IN_PROGRESS,
TRANSFER_CAN_BE_FINISHED,
TRASNFER_FINISHED,
} transfer_state_t;
typedef struct {
vfs_file_t file_to_program; // A pointer to the directory entry of the file being programmed
vfs_sector_t start_sector; // Start sector of the file being programmed
vfs_sector_t file_next_sector; // Expected next sector of the file
vfs_sector_t last_ooo_sector; // Last out of order sector within the file
uint32_t size_processed; // The number of bytes processed by the stream
uint32_t file_size; // Size of the file indicated by root dir. Only allowed to increase
uint32_t size_transferred; // The number of bytes transferred
transfer_state_t transfer_state;// Transfer state
bool stream_open; // State of the stream
bool stream_started; // Stream processing started. This only gets reset remount
bool stream_finished; // Stream processing is done. This only gets reset remount
bool stream_optional_finish; // True if the stream processing can be considered done
bool file_info_optional_finish; // True if the file transfer can be considered done
bool transfer_timeout; // Set if the transfer was finished because of a timeout. This only gets reset remount
stream_type_t stream; // Current stream or STREAM_TYPE_NONE is stream is closed. This only gets reset remount
} file_transfer_state_t;
typedef enum {
VFS_MNGR_STATE_DISCONNECTED,
VFS_MNGR_STATE_RECONNECTING,
VFS_MNGR_STATE_CONNECTED
} vfs_mngr_state_t;
static const file_transfer_state_t default_transfer_state = {
VFS_FILE_INVALID,
VFS_INVALID_SECTOR,
VFS_INVALID_SECTOR,
VFS_INVALID_SECTOR,
0,
0,
0,
TRANSFER_NOT_STARTED,
false,
false,
false,
false,
false,
false,
STREAM_TYPE_NONE,
};
//static uint32_t usb_buffer[VFS_SECTOR_SIZE / sizeof(uint32_t)];
static error_t fail_reason = E_SUCCESS;
static file_transfer_state_t file_transfer_state;
// These variables can be access from multiple threads
// so access to them must be synchronized
static vfs_mngr_state_t vfs_state;
static vfs_mngr_state_t vfs_state_next;
static bool vfs_next_remount_full = false;
static uint32_t time_usb_idle;
static osStaticMutexDef_t vfsMutexControlBlock;
static osSemaphoreId vfsMutexHandle = NULL;
// Synchronization functions
static void sync_init(void);
static void sync_assert_usb_thread(void);
static void sync_lock(void);
static void sync_unlock(void);
static bool changing_state(void);
static void build_filesystem(void);
static void file_change_handler(const vfs_filename_t filename, vfs_file_change_t change, vfs_file_t file, vfs_file_t new_file_data);
static void file_data_handler(uint32_t sector, const uint8_t *buf, uint32_t num_of_sectors);
static bool ready_for_state_change(void);
static void abort_remount(void);
static void transfer_update_file_info(vfs_file_t file, uint32_t start_sector, uint32_t size, stream_type_t stream);
static void transfer_reset_file_info(void);
static void transfer_stream_open(stream_type_t stream, uint32_t start_sector);
static void transfer_stream_data(uint32_t sector, const uint8_t *data, uint32_t size);
static void transfer_update_state(error_t status);
void vfs_mngr_fs_enable(bool enable)
{
sync_lock();
vfs_printf("Enable = %d", enable);
if (enable) {
if (VFS_MNGR_STATE_DISCONNECTED == vfs_state_next) {
vfs_printf(" Switch to Connected");
vfs_state_next = VFS_MNGR_STATE_CONNECTED;
} else {
vfs_printf(" no switch");
};
} else {
vfs_printf(" Switch to DISconnected");
vfs_state_next = VFS_MNGR_STATE_DISCONNECTED;
}
sync_unlock();
}
void vfs_mngr_fs_remount(bool force_full)
{
sync_lock();
// Only start a remount if in the connected state and not in a transition
if (!changing_state() && (VFS_MNGR_STATE_CONNECTED == vfs_state)) {
vfs_state_next = VFS_MNGR_STATE_RECONNECTING;
}
vfs_next_remount_full |= force_full;
sync_unlock();
}
void vfs_mngr_init(bool enable)
{
vfs_printf("vfs_mngr_init");
sync_assert_usb_thread();
build_filesystem();
if (enable) {
vfs_state = VFS_MNGR_STATE_CONNECTED;
vfs_state_next = VFS_MNGR_STATE_CONNECTED;
vfs_info.MediaReady = 1;
} else {
vfs_state = VFS_MNGR_STATE_DISCONNECTED;
vfs_state_next = VFS_MNGR_STATE_DISCONNECTED;
vfs_info.MediaReady = 0;
}
vfs_info.MediaChanged = 0;
}
void vfs_mngr_periodic(uint32_t elapsed_ms)
{
bool change_state;
vfs_mngr_state_t vfs_state_local;
vfs_mngr_state_t vfs_state_local_prev;
sync_assert_usb_thread();
sync_lock();
// Return immediately if the desired state has been reached
if (!changing_state()) {
sync_unlock();
return;
}
change_state = ready_for_state_change();
if (time_usb_idle < MAX_EVENT_TIME_MS) {
time_usb_idle += elapsed_ms;
}
if (!change_state) {
sync_unlock();
return;
}
vfs_printf("vfs_mngr_periodic()\r\n");
vfs_printf(" time_usb_idle=%i\r\n", time_usb_idle);
vfs_printf(" transfer_state=%i\r\n", file_transfer_state.transfer_state);
// Transition to new state
vfs_state_local_prev = vfs_state;
vfs_state = vfs_state_next;
switch (vfs_state) {
case VFS_MNGR_STATE_RECONNECTING:
// Transition back to the connected state
vfs_state_next = VFS_MNGR_STATE_CONNECTED;
break;
default:
// No state change logic required in other states
break;
}
vfs_state_local = vfs_state;
time_usb_idle = 0;
sync_unlock();
// Processing when leaving a state
vfs_printf(" state %i->%i\r\n", vfs_state_local_prev, vfs_state_local);
bool want_notify_only = false; // Use this if the transfer timed out and we dont need full reconnect
switch (vfs_state_local_prev) {
case VFS_MNGR_STATE_DISCONNECTED:
// No action needed
break;
case VFS_MNGR_STATE_RECONNECTING:
// No action needed
break;
case VFS_MNGR_STATE_CONNECTED:
// Close ongoing transfer if there is one
if (file_transfer_state.transfer_state != TRASNFER_FINISHED) {
vfs_printf(" transfer timeout\r\n");
file_transfer_state.transfer_timeout = true;
transfer_update_state(E_SUCCESS);
want_notify_only = true;
}
assert_param(TRASNFER_FINISHED == file_transfer_state.transfer_state);
vfs_user_disconnecting();
break;
}
// Maybe make this configurable?
//want_notify_only = false;
// Processing when entering a state
switch (vfs_state_local) {
case VFS_MNGR_STATE_DISCONNECTED:
vfs_printf("+DISCON");
if (want_notify_only && !vfs_next_remount_full) {
vfs_info.MediaChanged = 1;
vfs_printf("Notify media change");
} else {
vfs_info.MediaReady = 0;
vfs_printf("Reconnect mass storage");
}
vfs_next_remount_full = false;
break;
case VFS_MNGR_STATE_RECONNECTING:
vfs_printf("+RECON");
if (want_notify_only && !vfs_next_remount_full) {
vfs_info.MediaChanged = 1;
vfs_printf("Notify media change");
} else {
vfs_info.MediaReady = 0;
vfs_printf("Reconnect mass storage");
}
vfs_next_remount_full = false;
break;
case VFS_MNGR_STATE_CONNECTED:
vfs_printf("+CONNECTED");
build_filesystem();
vfs_info.MediaReady = 1;
break;
}
return;
}
error_t vfs_mngr_get_transfer_status(void)
{
sync_assert_usb_thread();
return fail_reason;
}
void vfs_if_usbd_msc_init(void)
{
sync_init();
build_filesystem();
vfs_state = VFS_MNGR_STATE_DISCONNECTED;
vfs_state_next = VFS_MNGR_STATE_DISCONNECTED;
time_usb_idle = 0;
vfs_info.MediaReady = 0;
vfs_info.MediaChanged = 0;
vfs_printf("vfs_if_usbd_msc_init");
}
void vfs_if_usbd_msc_read_sect(uint32_t sector, uint8_t *buf, uint32_t num_of_sectors)
{
sync_assert_usb_thread();
// /* this is very spammy */ vfs_printf("\033[35mREAD @ %d, len %d\033[0m", sector, num_of_sectors);
// dont proceed if we're not ready
if (!vfs_info.MediaReady) {
vfs_printf("Not Rdy");
return;
}
// indicate msc activity
// main_blink_msc_led(MAIN_LED_OFF);
vfs_read(sector, buf, num_of_sectors);
}
void vfs_if_usbd_msc_write_sect(uint32_t sector, uint8_t *buf, uint32_t num_of_sectors)
{
sync_assert_usb_thread();
vfs_printf("\033[32mWRITE @ %d, len %d\033[0m", sector, num_of_sectors);
if (buf[0] == 0xF8 && buf[1] == 0xFF && buf[2] == 0xFF && buf[3] == 0xFF) {
vfs_printf("Discard write of F8,FF,FF,FF");
return;
}
if (!vfs_info.MediaReady) {
vfs_printf("Not Rdy");
return;
}
// Restart the disconnect counter on every packet
// so the device does not detach in the middle of a
// transfer.
time_usb_idle = 0;
if (TRASNFER_FINISHED == file_transfer_state.transfer_state) {
vfs_printf("Xfer done.");
return;
}
// indicate msc activity
// main_blink_msc_led(MAIN_LED_OFF);
vfs_printf("call vfs_write");
vfs_write(sector, buf, num_of_sectors);
if (TRASNFER_FINISHED == file_transfer_state.transfer_state) {
vfs_printf("Xfer done now.");
return;
}
file_data_handler(sector, buf, num_of_sectors);
}
static void sync_init(void)
{
osMutexStaticDef(vfsMutex, &vfsMutexControlBlock);
vfsMutexHandle = osMutexCreate(osMutex(vfsMutex));
}
static inline void sync_assert_usb_thread(void)
{
assert_param(osThreadGetId() == tskMainHandle);
}
static void sync_lock(void)
{
assert_param(osOK == osMutexWait(vfsMutexHandle, 100));
}
static void sync_unlock(void)
{
assert_param(osOK == osMutexRelease(vfsMutexHandle));
}
static bool changing_state(void)
{
return vfs_state != vfs_state_next;
}
static void build_filesystem(void)
{
// Update anything that could have changed file system state
file_transfer_state = default_transfer_state;
vfs_user_build_filesystem();
vfs_set_file_change_callback(file_change_handler);
// Set mass storage parameters
vfs_info.MemorySize = vfs_get_total_size();
vfs_info.BlockSize = VFS_SECTOR_SIZE;
vfs_info.BlockGroup = 1;
vfs_info.BlockCount = vfs_info.MemorySize / vfs_info.BlockSize;
// vfs_info.BlockBuf = (uint8_t *) usb_buffer;
}
static void switch_to_new_file(stream_type_t stream, uint32_t start_sector, bool andReopen)
{ // This should close the stream
vfs_printf("****** NEW FILE STREAM! *******");
if (!file_transfer_state.transfer_state) {
file_transfer_state.transfer_timeout = true;
transfer_update_state(E_SUCCESS);
} else {
if (file_transfer_state.stream_open) {
stream_close();
file_transfer_state.stream_open = false;
}
}
if (andReopen) {
// and we start anew
file_transfer_state.start_sector = VFS_INVALID_SECTOR; // pretend we have no srtart sector yet!
transfer_stream_open(stream, start_sector);
}
}
// Callback to handle changes to the root directory. Should be used with vfs_set_file_change_callback
static void file_change_handler(const vfs_filename_t filename, vfs_file_change_t change, vfs_file_t file, vfs_file_t new_file_data)
{
vfs_printf("\033[33m@file_change_handler\033[0m (name=%*s, file=%p, ftp=%p, change=%i)\r\n", 11, filename, file, change);
vfs_user_file_change_handler(filename, change, file, new_file_data);
if (TRASNFER_FINISHED == file_transfer_state.transfer_state) {
// If the transfer is finished stop further processing
vfs_printf("> Transfer is finished.");
return;
}
if (VFS_FILE_CHANGED == change) {
vfs_printf("> Change");
if (file == file_transfer_state.file_to_program) {
vfs_printf(" Stream is open, continue");
stream_type_t stream;
uint32_t size = vfs_file_get_size(new_file_data);
vfs_sector_t sector = vfs_file_get_start_sector(new_file_data);
stream = stream_type_from_name(filename);
transfer_update_file_info(file, sector, size, stream);
} else {
vfs_printf(" No stream.");
}
}
if (VFS_FILE_CREATED == change) {
stream_type_t stream;
vfs_printf("> Created");
if (STREAM_TYPE_NONE != stream_type_from_name(filename)) {
vfs_printf(" Stream is open, continue");
// Check for a know file extension to detect the current file being
// transferred. Ignore hidden files since MAC uses hidden files with
// the same extension to keep track of transfer info in some cases.
if (!(VFS_FILE_ATTR_HIDDEN & vfs_file_get_attr(new_file_data))) {
stream = stream_type_from_name(filename);
uint32_t size = vfs_file_get_size(new_file_data);
vfs_sector_t sector = vfs_file_get_start_sector(new_file_data);
transfer_update_file_info(file, sector, size, stream);
}
} else {
vfs_printf(" No matching stream found!");
}
}
if (VFS_FILE_DELETED == change) {
vfs_printf("> Deleted");
if (file == file_transfer_state.file_to_program) {
vfs_printf(" Deleted transferred file!");
// The file that was being transferred has been deleted
transfer_reset_file_info();
} else {
vfs_printf("Delete other file");
}
}
}
// Handler for file data arriving over USB. This function is responsible
// for detecting the start of a BIN/HEX file and performing programming
static void file_data_handler(uint32_t sector, const uint8_t *buf, uint32_t num_of_sectors)
{
stream_type_t stream;
uint32_t size;
vfs_printf("\033[33m@file_data_handler\033[0m (sec=%d, num=%d)", sector, num_of_sectors);
if (sector <= 1) {
vfs_printf("Discard write to sector %d", sector);
return;
}
// this is the key for starting a file write - we dont care what file types are sent
// just look for something unique (NVIC table, hex, srec, etc) until root dir is updated
if (!file_transfer_state.stream_started) {
vfs_printf("Stream not started yet");
// look for file types we can program
stream = stream_start_identify((uint8_t *) buf, VFS_SECTOR_SIZE * num_of_sectors);
if (STREAM_TYPE_NONE != stream) {
vfs_printf("Opening a stream...");
transfer_stream_open(stream, sector);
}
}
if (file_transfer_state.stream_started) {
vfs_printf("Stream is open, check if we can write ....");
// // Ignore sectors coming before this file
// if (sector < file_transfer_state.start_sector) {
// vfs_printf("Sector ABOVE current file!?");
// return;
// }
// sectors must be in order
if (sector != file_transfer_state.file_next_sector) {
vfs_printf("file_data_handler BAD sector=%i\r\n", sector);
// Try to find what file this belongs to, if any
// OS sometimes first writes the FAT and then the individual files,
// so it looks to us as a discontinuous file (in the better case)
vfs_filename_t fname;
vfs_file_t *file;
if (vfs_find_file(sector, &fname, &file)) {
vfs_printf("FOUND A FILE!! matches to %s", fname);
file_transfer_state.file_to_program = file;
stream = stream_start_identify((uint8_t *) buf, VFS_SECTOR_SIZE * num_of_sectors);
if (stream != STREAM_TYPE_NONE) {
switch_to_new_file(stream, sector, true);
goto proceed;
}
vfs_printf("No stream can handle this, give up. Could be kateswap junk (1)\r\n");
return;
}
if (sector >= file_transfer_state.start_sector && sector < file_transfer_state.file_next_sector) {
vfs_printf(" sector out of order! lowest ooo = %i\r\n",
file_transfer_state.last_ooo_sector);
if (VFS_INVALID_SECTOR == file_transfer_state.last_ooo_sector) {
file_transfer_state.last_ooo_sector = sector;
}
file_transfer_state.last_ooo_sector =
MIN(file_transfer_state.last_ooo_sector, sector);
} else {
vfs_printf(" sector not part of file transfer\r\n");
// BUT!! this can be a whole different file written elsewhere
// Let's try it.
if (sector > 70) {
// this is a guess as to where the actual data can start - usually 34 and 67 are some garbage in the FAT(s)
stream = stream_start_identify((uint8_t *) buf, VFS_SECTOR_SIZE * num_of_sectors);
if (stream != STREAM_TYPE_NONE) {
switch_to_new_file(stream, sector, true);
goto proceed;
}
vfs_printf("No stream can handle this, give up. Could be kateswap junk (2)\r\n");
return;
}
}
vfs_printf(" discarding data - size transferred=0x%x\r\n",
file_transfer_state.size_transferred);
vfs_printf_nonl("\033[31m", 5);
// FIXME this seems wrong
7 years ago
vfs_printf_nonl((const char *) buf, VFS_SECTOR_SIZE * num_of_sectors);
vfs_printf_nonl("\033[0m\r\n", 6);
return;
} else {
vfs_printf("sector is good");
}
proceed:
// This sector could be part of the file so record it
size = VFS_SECTOR_SIZE * num_of_sectors;
file_transfer_state.size_transferred += size;
file_transfer_state.file_next_sector = sector + num_of_sectors;
// If stream processing is done then discard the data
if (file_transfer_state.stream_finished) {
vfs_printf("vfs_manager file_data_handler\r\n sector=%i, size=%i\r\n", sector, size);
vfs_printf(" discarding data - size transferred=0x%x\r\n",
file_transfer_state.size_transferred);
vfs_printf_nonl("\033[31m", 5);
vfs_printf_nonl((const char *) buf, VFS_SECTOR_SIZE * num_of_sectors);
vfs_printf_nonl("\033[0m\r\n", 6);
transfer_update_state(E_SUCCESS);
return;
} else {
vfs_printf("stream is not finished, can handle...");
}
transfer_stream_data(sector, buf, size);
} else {
vfs_printf("Stream not started!!!!!!");
}
}
static bool ready_for_state_change(void)
{
uint32_t timeout_ms = INVALID_TIMEOUT_MS;
assert_param(vfs_state != vfs_state_next);
if (VFS_MNGR_STATE_CONNECTED == vfs_state) {
switch (file_transfer_state.transfer_state) {
case TRANSFER_NOT_STARTED:
case TRASNFER_FINISHED:
timeout_ms = DISCONNECT_DELAY_MS;
break;
case TRANSFER_IN_PROGRESS:
timeout_ms = DISCONNECT_DELAY_TRANSFER_TIMEOUT_MS;
break;
case TRANSFER_CAN_BE_FINISHED:
timeout_ms = DISCONNECT_DELAY_TRANSFER_IDLE_MS;
break;
default:
trap("Bad xfer state");
7 years ago
timeout_ms = DISCONNECT_DELAY_MS;
break;
}
} else if ((VFS_MNGR_STATE_DISCONNECTED == vfs_state) &&
(VFS_MNGR_STATE_CONNECTED == vfs_state_next)) {
timeout_ms = CONNECT_DELAY_MS;
} else if ((VFS_MNGR_STATE_RECONNECTING == vfs_state) &&
(VFS_MNGR_STATE_CONNECTED == vfs_state_next)) {
timeout_ms = RECONNECT_DELAY_MS;
} else if ((VFS_MNGR_STATE_RECONNECTING == vfs_state) &&
(VFS_MNGR_STATE_DISCONNECTED == vfs_state_next)) {
timeout_ms = 0;
}
if (INVALID_TIMEOUT_MS == timeout_ms) {
trap("invalid timeout");
7 years ago
timeout_ms = 0;
}
return time_usb_idle > timeout_ms ? true : false;
}
// Abort a remount if one is pending
void abort_remount(void)
{
sync_lock();
// Only abort a remount if in the connected state and reconnecting is the next state
if ((VFS_MNGR_STATE_RECONNECTING == vfs_state_next) && (VFS_MNGR_STATE_CONNECTED == vfs_state)) {
vfs_state_next = VFS_MNGR_STATE_CONNECTED;
}
sync_unlock();
}
// Update the tranfer state with file information
static void transfer_update_file_info(vfs_file_t file, uint32_t start_sector, uint32_t size, stream_type_t stream)
{
vfs_printf("\033[33m@transfer_update_file_info\033[0m (file=%p, start_sector=%i, size=%i)\r\n", file, start_sector, size);
if (TRASNFER_FINISHED == file_transfer_state.transfer_state) {
trap("xfer already finished");
7 years ago
return;
}
// Initialize the directory entry if it has not been set
if (VFS_FILE_INVALID == file_transfer_state.file_to_program) {
file_transfer_state.file_to_program = file;
if (file != VFS_FILE_INVALID) {
vfs_printf(" file_to_program=%p\r\n", file);
}
}
// Initialize the starting sector if it has not been set
if (VFS_INVALID_SECTOR == file_transfer_state.start_sector) {
file_transfer_state.start_sector = start_sector;
if (start_sector != VFS_INVALID_SECTOR) {
vfs_printf(" start_sector=%i\r\n", start_sector);
}
}
// Initialize the stream if it has not been set
if (STREAM_TYPE_NONE == file_transfer_state.stream) {
file_transfer_state.stream = stream;
if (stream != STREAM_TYPE_NONE) {
vfs_printf(" stream=%i\r\n", stream);
}
}
// Check - File size must either grow or be smaller than the size already transferred
if ((size < file_transfer_state.file_size) && (size < file_transfer_state.size_transferred)) {
vfs_printf(" error: file size changed from %i to %i\r\n", file_transfer_state.file_size, size);
// this is probably a new file
trap("File shrinks");//XXX
switch_to_new_file(stream, start_sector, true);
}
// Check - Starting sector must be the same - this is optional for file info since it may not be present initially
if ((VFS_INVALID_SECTOR != start_sector) && (start_sector != file_transfer_state.start_sector)) {
vfs_printf(" error: starting sector changed from %i to %i\r\n", file_transfer_state.start_sector, start_sector);
// this is probably a new file
dbg("WARN! Changed start offset");
//trap("Changed start offset");//FIXME this sometimes happens, need to find how to reproduce
7 years ago
switch_to_new_file(stream, start_sector, true);
}
// Check - stream must be the same
if (stream != file_transfer_state.stream) {
vfs_printf(" error: changed types during transfer from %i to %i\r\n", stream, file_transfer_state.stream);
transfer_update_state(E_ERROR_DURING_TRANSFER);
return;
}
// Update values - Size is the only value that can change
file_transfer_state.file_size = size;
vfs_printf(" updated size=%i\r\n", size);
transfer_update_state(E_SUCCESS);
}
// Reset the transfer information or error if transfer is already in progress
static void transfer_reset_file_info(void)
{
vfs_printf("vfs_manager transfer_reset_file_info()\r\n");
if (file_transfer_state.stream_open) {
transfer_update_state(E_ERROR_DURING_TRANSFER);
} else {
file_transfer_state = default_transfer_state;
abort_remount();
}
}
// Update the tranfer state with new information
static void transfer_stream_open(stream_type_t stream, uint32_t start_sector)
{
error_t status;
assert_param(!file_transfer_state.stream_open);
assert_param(start_sector != VFS_INVALID_SECTOR);
vfs_printf("\033[33m@transfer_stream_open\033[0m (stream=%i, start_sector=%i)\r\n",
stream, start_sector);
// Check - Starting sector must be the same
if (start_sector != file_transfer_state.start_sector && file_transfer_state.start_sector != VFS_INVALID_SECTOR) {
vfs_printf(" error: starting sector changed from %i to %i\r\n", file_transfer_state.start_sector, start_sector);
// this is probably a new file
switch_to_new_file(stream, start_sector, false);
file_transfer_state.start_sector = VFS_INVALID_SECTOR;
}
// Check - stream must be the same
if (stream != file_transfer_state.stream && file_transfer_state.stream != STREAM_TYPE_NONE) {
vfs_printf(" error: changed types during tranfer from %i to %i\r\n", stream, file_transfer_state.stream);
// this is probably a new file
switch_to_new_file(stream, start_sector, false);
file_transfer_state.start_sector = VFS_INVALID_SECTOR;
}
// Initialize the starting sector if it has not been set
if (VFS_INVALID_SECTOR == file_transfer_state.start_sector) {
file_transfer_state.start_sector = start_sector;
if (start_sector != VFS_INVALID_SECTOR) {
vfs_printf(" start_sector=%i\r\n", start_sector);
}
}
// Initialize the stream if it has not been set
if (STREAM_TYPE_NONE == file_transfer_state.stream) {
file_transfer_state.stream = stream;
if (stream != STREAM_TYPE_NONE) {
vfs_printf(" stream=%i\r\n", stream);
}
}
// Open stream
status = stream_open(stream);
vfs_printf(" stream_open stream=%i ret %i\r\n", stream, status);
if (E_SUCCESS == status) {
file_transfer_state.file_next_sector = start_sector;
file_transfer_state.stream_open = true;
file_transfer_state.stream_started = true;
}
transfer_update_state(status);
}
// Update the tranfer state with new information
static void transfer_stream_data(uint32_t sector, const uint8_t *data, uint32_t size)
{
error_t status;
vfs_printf("\033[33m@transfer_stream_data\033[0m (sector=%i, size=%i)\r\n", sector, size);
vfs_printf(" size processed=0x%x, data=%x,%x,%x,%x,...\r\n",
file_transfer_state.size_processed, data[0], data[1], data[2], data[3]);
if (file_transfer_state.stream_finished) {
trap("Stream already closed");
7 years ago
return;
}
assert_param(size % VFS_SECTOR_SIZE == 0);
assert_param(file_transfer_state.stream_open);
status = stream_write((uint8_t *) data, size);
vfs_printf(" stream_write ret=%i\r\n", status);
if (E_SUCCESS_DONE == status) {
// Override status so E_SUCCESS_DONE
// does not get passed into transfer_update_state
status = stream_close();
vfs_printf(" stream_close ret=%i\r\n", status);
file_transfer_state.stream_open = false;
file_transfer_state.stream_finished = true;
file_transfer_state.stream_optional_finish = true;
} else if (E_SUCCESS_DONE_OR_CONTINUE == status) {
status = E_SUCCESS;
file_transfer_state.stream_optional_finish = true;
} else {
file_transfer_state.stream_optional_finish = false;
}
file_transfer_state.size_processed += size;
transfer_update_state(status);
}
// Check if the current transfer is still in progress, done, or if an error has occurred
static void transfer_update_state(error_t status)
{
bool transfer_timeout;
bool transfer_started;
bool transfer_can_be_finished;
bool transfer_must_be_finished;
bool out_of_order_sector;
error_t local_status = status;
assert_param((status != E_SUCCESS_DONE) &&
(status != E_SUCCESS_DONE_OR_CONTINUE));
if (TRASNFER_FINISHED == file_transfer_state.transfer_state) {
trap("Xfer already closed");
7 years ago
return;
}
// Update file info status. The end of a file is never known for sure since
// what looks like a complete file could be part of a file getting flushed to disk.
// The criteria for an successful optional finish is
// 1. A file has been detected
// 2. The size of the file indicated in the root dir has been transferred
// 3. The file size is greater than zero
file_transfer_state.file_info_optional_finish =
(file_transfer_state.file_to_program != VFS_FILE_INVALID) &&
(file_transfer_state.size_transferred >= file_transfer_state.file_size) &&
(file_transfer_state.file_size > 0);
transfer_timeout = file_transfer_state.transfer_timeout;
transfer_started = (VFS_FILE_INVALID != file_transfer_state.file_to_program) ||
(STREAM_TYPE_NONE != file_transfer_state.stream);
// The transfer can be finished if both file and stream processing
// can be considered complete
transfer_can_be_finished = file_transfer_state.file_info_optional_finish &&
file_transfer_state.stream_optional_finish;
// The transfer must be fnished if stream processing is for sure complete
// and file processing can be considered complete
transfer_must_be_finished = file_transfer_state.stream_finished &&
file_transfer_state.file_info_optional_finish;
out_of_order_sector = false;
if (file_transfer_state.last_ooo_sector != VFS_INVALID_SECTOR) {
assert_param(file_transfer_state.start_sector != VFS_INVALID_SECTOR);
uint32_t sector_offset = (file_transfer_state.last_ooo_sector -
file_transfer_state.start_sector) * VFS_SECTOR_SIZE;
if (sector_offset < file_transfer_state.size_processed) {
// The out of order sector was within the range of data already
// processed.
out_of_order_sector = true;
}
}
// Set the transfer state and set the status if necessary
if (local_status != E_SUCCESS) {
file_transfer_state.transfer_state = TRASNFER_FINISHED;
} else if (transfer_timeout) {
if (out_of_order_sector) {
local_status = E_OOO_SECTOR;
} else if (!transfer_started) {
local_status = E_SUCCESS;
} else if (transfer_can_be_finished) {
local_status = E_SUCCESS;
} else {
local_status = E_TRANSFER_TIMEOUT;
}
file_transfer_state.transfer_state = TRASNFER_FINISHED;
} else if (transfer_must_be_finished) {
file_transfer_state.transfer_state = TRASNFER_FINISHED;
} else if (transfer_can_be_finished) {
file_transfer_state.transfer_state = TRANSFER_CAN_BE_FINISHED;
} else if (transfer_started) {
file_transfer_state.transfer_state = TRANSFER_IN_PROGRESS;
}
if (TRASNFER_FINISHED == file_transfer_state.transfer_state) {
vfs_printf("vfs_manager transfer_update_state(status=%i)\r\n", status);
vfs_printf(" file=%p, start_sect= %i, size=%i\r\n",
file_transfer_state.file_to_program, file_transfer_state.start_sector,
file_transfer_state.file_size);
vfs_printf(" stream=%i, size_processed=%i, opt_finish=%i, timeout=%i\r\n",
file_transfer_state.stream, file_transfer_state.size_processed,
file_transfer_state.file_info_optional_finish, transfer_timeout);
// Close the file stream if it is open
if (file_transfer_state.stream_open) {
error_t close_status;
close_status = stream_close();
vfs_printf(" stream closed ret=%i\r\n", close_status);
file_transfer_state.stream_open = false;
if (E_SUCCESS == local_status) {
local_status = close_status;
}
}
// Set the fail reason
fail_reason = local_status;
vfs_printf(" Transfer finished, status: %i=%s\r\n", fail_reason, error_get_string(fail_reason));
}
// If this state change is not from aborting a transfer
// due to a remount then trigger a remount
if (!transfer_timeout) {
vfs_printf("~~ request Remount from transfer_update_state()");
vfs_mngr_fs_remount(false);
}
}