You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
92 lines
4.4 KiB
92 lines
4.4 KiB
# esp-vt100-firmware
|
|
|
|
ESP8266 Remote Terminal project
|
|
|
|
This project is based on SpriteTM's esphttpd and libesphttpd, forked by MightyPork to
|
|
[MightyPork/esphttpd](https://github.com/MightyPork/esphttpd) and
|
|
[MightyPork/libesphttpd](https://github.com/MightyPork/libesphttpd) respectively.
|
|
|
|
Those forks include improvements not yet available upstream.
|
|
|
|
## Goals
|
|
|
|
This project aims to be a wireless terminal emulator that'll work with the likes of
|
|
Arduino, AVR, PIC, STM8, STM32, mbed etc, anything with UART, even your USB-serial dongle will work.
|
|
|
|
Connect it to the master device via UART and use the terminal on the built-in web page for debug logging,
|
|
remote control etc. It works like a simple LCD screen, in a way.
|
|
|
|
It lets you make simple UI (manipulating the screen with ANSI sequences) and receive input from buttons on
|
|
the webpage (and keyboard on PC). Touch input is planned as well.
|
|
|
|
The screen size is adjustable up to 25x80 (via a special control sequence) and uses 16 standard colors
|
|
(8 dark and 8 bright).
|
|
|
|
## Project status
|
|
|
|
*Almost finished, still possibly buggy, but it looks promising. Most of the features are there now.*
|
|
|
|
- We have a working **2-way terminal** (UART->ESP->Browser and vice versa) with real-time update via websocket.
|
|
|
|
This means that what you type in the browser is sent to UART0 and what's received on UART0 is processed by the
|
|
ANSI parser and applied to the internal screen buffer. You'll also immediately see the changes in your browser.
|
|
There's a filter in the way that discards garbage characters (like unicode and most ASCII outside 32-126).
|
|
|
|
For a quick test, try connecting the UART0 Rx and Tx with a piece of wire to make a loopback interface.
|
|
*NOTE: Use the bare module, not something like LoLin or NodeMCU with a FTDI, it'll interfere*.
|
|
You should then directly see what you type & can even try some ANSI sequences, right from the browser.
|
|
|
|
- All ANSI sequences that make sense, as well as control codes like Backspace and CR / LF are implemented.
|
|
Set colors with your usual `\e[31;1m` etc (see Wikipedia). `\e` is the ASCII code 27 (ESC).
|
|
|
|
Arrow keys generate ANSI sequences, ESC sends literal ASCII code 27 etc. Almost everything can be input
|
|
straight from the browser.
|
|
|
|
- To resize the screen, send `\e]W<rows>;<cols>\a` (it's an OSC code, terminated by ST).
|
|
|
|
- Buttons pressed in the browser UI send ASCII codes 1..5. Mouse clicks also send events to the server,
|
|
but currently don't generate any output in the terminal, I still hadn't decided on the best encoding.
|
|
|
|
- By tapping the header on the terminal page, you'll open the WiFi config page. It's in essence the
|
|
esphttpd's wifi config page, but re-styled and much improved. You can set AP SSID, channel, see the IP
|
|
address etc right there.
|
|
|
|
## Setting it all up
|
|
|
|
- Install [esp-open-sdk](https://github.com/pfalcon/esp-open-sdk/) and build it with
|
|
`make toolchain esptool libhal STANDALONE=n`. Make sure the `xtensa-lx106-elf/bin` folder is on $PATH.
|
|
- Install [esptool](https://github.com/espressif/esptool) (it's in Arch community repo and on AUR, too)
|
|
- Set up udev rules so you have access to ttyUSB0 without root, eg:
|
|
|
|
```
|
|
KERNEL=="tty[A-Z]*[0-9]*", GROUP="uucp", MODE="0666"
|
|
```
|
|
- Clone this project with `--recursive`, or afterwards run `git submodule init` and `git submodule update`.
|
|
|
|
## Development
|
|
|
|
The web resources are in `html_orig`. To prepare for a build, run `compress_html.sh`.
|
|
This should pack them and put in `html`.
|
|
|
|
If you're missing the compression tools, you can simply copy them there manually uncompressed and hope for the best.
|
|
|
|
serial comm is handled in `serial.c`, sockets etc in `user_main.c`.
|
|
|
|
Get the IoT SDK from one of:
|
|
|
|
```
|
|
ESP8266_NONOS_SDK_V2.0.0_16_08_10.zip:
|
|
wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1690"
|
|
ESP8266_NONOS_SDK_V2.0.0_16_07_19.zip:
|
|
wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1613"
|
|
ESP8266_NONOS_SDK_V1.5.4_16_05_20.zip:
|
|
wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1469"
|
|
ESP8266_NONOS_SDK_V1.5.3_16_04_18.zip:
|
|
wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1361"
|
|
ESP8266_NONOS_SDK_V1.5.2_16_01_29.zip:
|
|
wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1079"
|
|
```
|
|
|
|
It's tested with 1.5.2, 2.0.0 won't work without adjusting the build scripts. Any 1.5.x could be fine.
|
|
|
|
To flash, just run `make flash`. First make sure your `esphttpdconfig.mk` is set up properly - link to sdk etc.
|
|
|