ESPTerm - ESP8266 terminal emulator. Branches: [master] patches, [work] next release
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
espterm-firmware/html_orig/lang/en.php

149 lines
4.9 KiB

<?php
return [
'appname' => 'ESPTerm',
'menu.cfg_wifi' => 'WiFi Settings',
'menu.cfg_network' => 'Network Settings',
'menu.cfg_term' => 'Terminal Settings',
'menu.about' => 'About ESPTerm',
'menu.help' => 'Quick Reference',
'menu.term' => 'Back to Terminal',
'menu.cfg_system' => 'System Settings',
'menu.cfg_wifi_conn' => 'Connecting to Network',
'menu.settings' => 'Settings',
'title.term' => 'Terminal',
'net.ap' => 'DHCP Server (AP)',
'net.sta' => 'DHCP Client (Station)',
'net.sta_mac' => 'Station MAC',
'net.ap_mac' => 'AP MAC',
'net.details' => 'MAC addresses',
'term.defaults' => 'Initial Settings',
'term.explain_initials' => '
7 years ago
Those are the initial settings used after ESPTerm powers on.
The selected colors will also be used after receiving a
screen- or attributes-reset command. Those settings will be
applied immediately after saving to preview the changes live.',
'term.example' => 'Default colors preview',
'term.term_title' => 'Header text',
7 years ago
'term.term_width' => 'Width / height',
'term.default_fg_bg' => 'Text / background',
'term.buttons' => 'Button labels',
'term.theme' => 'Color scheme',
'term.parser_tout_ms' => 'Parser timeout',
// terminal color labels
'color.0' => 'Black',
'color.1' => 'Red',
'color.2' => 'Green',
'color.3' => 'Yellow',
'color.4' => 'Blue',
'color.5' => 'Purple',
'color.6' => 'Cyan',
'color.7' => 'Silver',
'color.8' => 'Gray',
'color.9' => 'Light Red',
'color.10' => 'Light Green',
'color.11' => 'Light Yellow',
'color.12' => 'Light Blue',
'color.13' => 'Light Purple',
'color.14' => 'Light Cyan',
'color.15' => 'White',
'net.explain_sta' => '
Switch off Dynamic IP to configure the static IP address.',
'net.explain_ap' => '
Those settings affect the built-in DHCP server in AP mode.',
'net.ap_dhcp_time' => 'Lease time',
'net.ap_dhcp_start' => 'Pool start IP',
'net.ap_dhcp_end' => 'Pool end IP',
'net.ap_addr_ip' => 'Own IP address',
'net.ap_addr_mask' => 'Subnet mask',
'net.sta_dhcp_enable' => 'Use dynamic IP',
'net.sta_addr_ip' => 'ESPTerm static IP',
'net.sta_addr_mask' => 'Subnet mask',
'net.sta_addr_gw' => 'Gateway IP',
'wifi.ap' => 'Built-in Access Point',
'wifi.sta' => 'Join Existing Network',
'wifi.enable' => 'Enabled',
'wifi.tpw' => 'Transmit power',
'wifi.ap_channel' => 'Channel',
'wifi.ap_ssid' => 'AP SSID',
'wifi.ap_password' => 'Password',
'wifi.ap_hidden' => 'Hide SSID',
'wifi.sta_info' => 'Selected',
'wifi.not_conn' => 'Not connected.',
'wifi.sta_none' => 'None',
7 years ago
'wifi.sta_active_pw' => '🔒',
'wifi.sta_active_nopw' => '🔓 Open access',
'wifi.connected_ip_is' => 'Connected, IP is ',
'wifi.sta_password' => 'Password:',
7 years ago
'wifi.scanning' => 'Scanning',
'wifi.scan_now' => 'Click here to start scanning!',
'wifi.cant_scan_no_sta' => 'Click here to enable client mode and start scanning!',
7 years ago
'wifi.select_ssid' => 'Available networks:',
'wifi.enter_passwd' => 'Enter password for ":ssid:"',
'wifi.sta_explain' => 'After selecting a network, press Apply to connect.',
'wifi.conn.status' => 'Status:',
'wifi.conn.back_to_config' => 'Back to WiFi config',
'wifi.conn.telemetry_lost' => 'Telemetry lost, something went wrong. Try again...',
'wifi.conn.disabled' =>"Station mode is disabled.",
'wifi.conn.idle' =>"Idle, not connected and with no IP.",
'wifi.conn.success' => "Connected! Received IP ",
'wifi.conn.working' => "Connecting to selected AP",
'wifi.conn.fail' => "Connection failed, check settings & try again. Cause: ",
'system.save_restore' => 'Save & Restore',
'system.confirm_restore' => 'Restore all settings to their default values?',
'system.confirm_restore_hard' =>
'Restore to firmware default settings? This will reset ' .
'all active settings and switch to AP mode with the default SSID.',
'system.confirm_store_defaults' =>
'Enter admin password to confirm you want to store the current settings as defaults.',
'system.password' => 'Admin password:',
'system.restore_defaults' => 'Reset active settings to defaults',
'system.write_defaults' => 'Save active settings as defaults',
'system.restore_hard' => 'Reset active settings to firmware defaults',
'system.explain_persist' => '
ESPTerm contains two persistent memory banks, one for default and
one for active settings. Active settings can be stored as defaults
by the administrator (password required).
',
'system.uart' => 'Serial Port',
'system.explain_uart' => '
7 years ago
This form controls the primary, communication UART. The debug UART is fixed at 115.200 baud, one stop-bit and no parity.
',
'uart.baud' => 'Baud rate',
'uart.parity' => 'Parity',
'uart.parity.none' => 'None',
'uart.parity.odd' => 'Odd',
'uart.parity.even' => 'Even',
'uart.stop_bits' => 'Stop-bits',
'uart.stop_bits.one' => 'One',
'uart.stop_bits.one_and_half' => 'One and half',
'uart.stop_bits.two' => 'Two',
'apply' => 'Apply!',
'enabled' => 'Enabled',
'disabled' => 'Disabled',
'yes' => 'Yes',
'no' => 'No',
7 years ago
'confirm' => 'OK',
'form_errors' => 'Validation errors for:',
];