'ESPTerm', 'menu.cfg_wifi' => 'WiFi Settings', 'menu.cfg_network' => 'Network Settings', 'menu.cfg_term' => 'Terminal Settings', 'menu.about' => 'About ESPTerm', 'menu.help' => 'Quick Reference', 'menu.term' => 'Back to Terminal', 'menu.cfg_system' => 'System Settings', 'menu.cfg_wifi_conn' => 'Connecting to Network', 'menu.settings' => 'Settings', 'title.term' => 'Terminal', 'net.ap' => 'DHCP Server (AP)', 'net.sta' => 'DHCP Client (Station)', 'net.sta_mac' => 'Station MAC', 'net.ap_mac' => 'AP MAC', 'net.details' => 'MAC addresses', 'term.defaults' => 'Initial Settings', 'term.explain_initials' => ' Those are the initial settings used after ESPTerm powers on. The selected colors will also be used after receiving a screen- or attributes-reset command. Those settings will be applied immediately after saving to preview the changes live.', 'term.example' => 'Default colors preview', 'term.term_title' => 'Header text', 'term.term_width' => 'Width / height', 'term.default_fg_bg' => 'Text / background', 'term.buttons' => 'Button labels', 'term.theme' => 'Color scheme', 'term.parser_tout_ms' => 'Parser timeout', // terminal color labels 'color.0' => 'Black', 'color.1' => 'Red', 'color.2' => 'Green', 'color.3' => 'Yellow', 'color.4' => 'Blue', 'color.5' => 'Purple', 'color.6' => 'Cyan', 'color.7' => 'Silver', 'color.8' => 'Gray', 'color.9' => 'Light Red', 'color.10' => 'Light Green', 'color.11' => 'Light Yellow', 'color.12' => 'Light Blue', 'color.13' => 'Light Purple', 'color.14' => 'Light Cyan', 'color.15' => 'White', 'net.explain_sta' => ' Switch off Dynamic IP to configure the static IP address.', 'net.explain_ap' => ' Those settings affect the built-in DHCP server in AP mode.', 'net.ap_dhcp_time' => 'Lease time', 'net.ap_dhcp_start' => 'Pool start IP', 'net.ap_dhcp_end' => 'Pool end IP', 'net.ap_addr_ip' => 'Own IP address', 'net.ap_addr_mask' => 'Subnet mask', 'net.sta_dhcp_enable' => 'Use dynamic IP', 'net.sta_addr_ip' => 'ESPTerm static IP', 'net.sta_addr_mask' => 'Subnet mask', 'net.sta_addr_gw' => 'Gateway IP', 'wifi.ap' => 'Built-in Access Point', 'wifi.sta' => 'Join Existing Network', 'wifi.enable' => 'Enabled', 'wifi.tpw' => 'Transmit power', 'wifi.ap_channel' => 'Channel', 'wifi.ap_ssid' => 'AP SSID', 'wifi.ap_password' => 'Password', 'wifi.ap_hidden' => 'Hide SSID', 'wifi.sta_info' => 'Selected', 'wifi.not_conn' => 'Not connected.', 'wifi.sta_none' => 'None', 'wifi.sta_active_pw' => '🔒', 'wifi.sta_active_nopw' => '🔓 Open access', 'wifi.connected_ip_is' => 'Connected, IP is ', 'wifi.sta_password' => 'Password:', 'wifi.scanning' => 'Scanning', 'wifi.scan_now' => 'Click here to start scanning!', 'wifi.cant_scan_no_sta' => 'Click here to enable client mode and start scanning!', 'wifi.select_ssid' => 'Available networks:', 'wifi.enter_passwd' => 'Enter password for ":ssid:"', 'wifi.sta_explain' => 'After selecting a network, press Apply to connect.', 'wifi.conn.status' => 'Status:', 'wifi.conn.back_to_config' => 'Back to WiFi config', 'wifi.conn.telemetry_lost' => 'Telemetry lost, something went wrong. Try again...', 'wifi.conn.disabled' =>"Station mode is disabled.", 'wifi.conn.idle' =>"Idle, not connected and with no IP.", 'wifi.conn.success' => "Connected! Received IP ", 'wifi.conn.working' => "Connecting to selected AP", 'wifi.conn.fail' => "Connection failed, check settings & try again. Cause: ", 'system.save_restore' => 'Save & Restore', 'system.confirm_restore' => 'Restore all settings to their default values?', 'system.confirm_restore_hard' => 'Restore to firmware default settings? This will reset ' . 'all active settings and switch to AP mode with the default SSID.', 'system.confirm_store_defaults' => 'Enter admin password to confirm you want to store the current settings as defaults.', 'system.password' => 'Admin password:', 'system.restore_defaults' => 'Reset active settings to defaults', 'system.write_defaults' => 'Save active settings as defaults', 'system.restore_hard' => 'Reset active settings to firmware defaults', 'system.explain_persist' => ' ESPTerm contains two persistent memory banks, one for default and one for active settings. Active settings can be stored as defaults by the administrator (password required). ', 'system.uart' => 'Serial Port', 'system.explain_uart' => ' This form controls the primary, communication UART. The debug UART is fixed at 115.200 baud, one stop-bit and no parity. ', 'uart.baud' => 'Baud rate', 'uart.parity' => 'Parity', 'uart.parity.none' => 'None', 'uart.parity.odd' => 'Odd', 'uart.parity.even' => 'Even', 'uart.stop_bits' => 'Stop-bits', 'uart.stop_bits.one' => 'One', 'uart.stop_bits.one_and_half' => 'One and half', 'uart.stop_bits.two' => 'Two', 'apply' => 'Apply!', 'enabled' => 'Enabled', 'disabled' => 'Disabled', 'yes' => 'Yes', 'no' => 'No', 'confirm' => 'OK', 'form_errors' => 'Validation errors for:', ];