You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
201 lines
13 KiB
201 lines
13 KiB
;********************************************************************************
|
|
; SOUBOR : INI_SDIO.S
|
|
; AUTOR : Petr Dousa, Ondrej Hruska
|
|
; DATUM : 10/2015
|
|
; POPIS : Bitove masky ridicich registru pro SDIO
|
|
;
|
|
; SD host Interface
|
|
;
|
|
; Toto je soucast knihovny pro STM32L100 vyvijene na Katedre mereni FEL CVUT.
|
|
;********************************************************************************
|
|
|
|
|
|
;****************************************************************************
|
|
;*
|
|
;* REGISTERS
|
|
;*
|
|
;****************************************************************************
|
|
|
|
; SD host
|
|
|
|
SDIO_POWER EQU (_SDIO + 0x00) ; SDIO power control register,
|
|
SDIO_CLKCR EQU (_SDIO + 0x04) ; SDI clock control register,
|
|
SDIO_ARG EQU (_SDIO + 0x08) ; SDIO argument register,
|
|
SDIO_CMD EQU (_SDIO + 0x0C) ; SDIO command register,
|
|
SDIO_RESPCMD EQU (_SDIO + 0x10) ; SDIO command response register,
|
|
SDIO_RESP1 EQU (_SDIO + 0x14) ; SDIO response 1 register,
|
|
SDIO_RESP2 EQU (_SDIO + 0x18) ; SDIO response 2 register,
|
|
SDIO_RESP3 EQU (_SDIO + 0x1C) ; SDIO response 3 register,
|
|
SDIO_RESP4 EQU (_SDIO + 0x20) ; SDIO response 4 register,
|
|
SDIO_DTIMER EQU (_SDIO + 0x24) ; SDIO data timer register,
|
|
SDIO_DLEN EQU (_SDIO + 0x28) ; SDIO data length register,
|
|
SDIO_DCTRL EQU (_SDIO + 0x2C) ; SDIO data control register,
|
|
SDIO_DCOUNT EQU (_SDIO + 0x30) ; SDIO data counter register,
|
|
SDIO_STA EQU (_SDIO + 0x34) ; SDIO status register,
|
|
SDIO_ICR EQU (_SDIO + 0x38) ; SDIO interrupt clear register,
|
|
SDIO_MASK EQU (_SDIO + 0x3C) ; SDIO mask register,
|
|
SDIO_FIFOCNT EQU (_SDIO + 0x48) ; SDIO FIFO counter register,
|
|
SDIO_FIFO EQU (_SDIO + 0x80) ; SDIO data FIFO register,
|
|
|
|
|
|
;****************************************************************************
|
|
;*
|
|
;* BIT MASKS AND DEFINITIONS
|
|
;*
|
|
;****************************************************************************
|
|
|
|
|
|
;***************** Bit definition for SDIO_POWER register *****************
|
|
SDIO_POWER_PWRCTRL EQU 0x03 ; PWRCTRL[1:0] bits (Power supply control bits)
|
|
SDIO_POWER_PWRCTRL_0 EQU 0x01 ; Bit 0
|
|
SDIO_POWER_PWRCTRL_1 EQU 0x02 ; Bit 1
|
|
|
|
;***************** Bit definition for SDIO_CLKCR register *****************
|
|
SDIO_CLKCR_CLKDIV EQU 0x00FF ; Clock divide factor
|
|
SDIO_CLKCR_CLKEN EQU 0x0100 ; Clock enable bit
|
|
SDIO_CLKCR_PWRSAV EQU 0x0200 ; Power saving configuration bit
|
|
SDIO_CLKCR_BYPASS EQU 0x0400 ; Clock divider bypass enable bit
|
|
|
|
SDIO_CLKCR_WIDBUS EQU 0x1800 ; WIDBUS[1:0] bits (Wide bus mode enable bit)
|
|
SDIO_CLKCR_WIDBUS_0 EQU 0x0800 ; Bit 0
|
|
SDIO_CLKCR_WIDBUS_1 EQU 0x1000 ; Bit 1
|
|
|
|
SDIO_CLKCR_NEGEDGE EQU 0x2000 ; SDIO_CK dephasing selection bit
|
|
SDIO_CLKCR_HWFC_EN EQU 0x4000 ; HW Flow Control enable
|
|
|
|
;****************** Bit definition for SDIO_ARG register ******************
|
|
SDIO_ARG_CMDARG EQU 0xFFFFFFFF ; Command argument
|
|
|
|
;****************** Bit definition for SDIO_CMD register ******************
|
|
SDIO_CMD_CMDINDEX EQU 0x003F ; Command Index
|
|
|
|
SDIO_CMD_WAITRESP EQU 0x00C0 ; WAITRESP[1:0] bits (Wait for response bits)
|
|
SDIO_CMD_WAITRESP_0 EQU 0x0040 ; Bit 0
|
|
SDIO_CMD_WAITRESP_1 EQU 0x0080 ; Bit 1
|
|
|
|
SDIO_CMD_WAITINT EQU 0x0100 ; CPSM Waits for Interrupt Request
|
|
SDIO_CMD_WAITPEND EQU 0x0200 ; CPSM Waits for ends of data transfer (CmdPend internal signal)
|
|
SDIO_CMD_CPSMEN EQU 0x0400 ; Command path state machine (CPSM) Enable bit
|
|
SDIO_CMD_SDIOSUSPEND EQU 0x0800 ; SD I/O suspend command
|
|
SDIO_CMD_ENCMDCOMPL EQU 0x1000 ; Enable CMD completion
|
|
SDIO_CMD_NIEN EQU 0x2000 ; Not Interrupt Enable
|
|
SDIO_CMD_CEATACMD EQU 0x4000 ; CE-ATA command
|
|
|
|
;**************** Bit definition for SDIO_RESPCMD register ****************
|
|
SDIO_RESPCMD_RESPCMD EQU 0x3F ; Response command index
|
|
|
|
;***************** Bit definition for SDIO_RESP0 register *****************
|
|
SDIO_RESP0_CARDSTATUS0 EQU 0xFFFFFFFF ; Card Status
|
|
|
|
;***************** Bit definition for SDIO_RESP1 register *****************
|
|
SDIO_RESP1_CARDSTATUS1 EQU 0xFFFFFFFF ; Card Status
|
|
|
|
;***************** Bit definition for SDIO_RESP2 register *****************
|
|
SDIO_RESP2_CARDSTATUS2 EQU 0xFFFFFFFF ; Card Status
|
|
|
|
;***************** Bit definition for SDIO_RESP3 register *****************
|
|
SDIO_RESP3_CARDSTATUS3 EQU 0xFFFFFFFF ; Card Status
|
|
|
|
;***************** Bit definition for SDIO_RESP4 register *****************
|
|
SDIO_RESP4_CARDSTATUS4 EQU 0xFFFFFFFF ; Card Status
|
|
|
|
;***************** Bit definition for SDIO_DTIMER register ****************
|
|
SDIO_DTIMER_DATATIME EQU 0xFFFFFFFF ; Data timeout period.
|
|
|
|
;***************** Bit definition for SDIO_DLEN register ******************
|
|
SDIO_DLEN_DATALENGTH EQU 0x01FFFFFF ; Data length value
|
|
|
|
;***************** Bit definition for SDIO_DCTRL register *****************
|
|
SDIO_DCTRL_DTEN EQU 0x0001 ; Data transfer enabled bit
|
|
SDIO_DCTRL_DTDIR EQU 0x0002 ; Data transfer direction selection
|
|
SDIO_DCTRL_DTMODE EQU 0x0004 ; Data transfer mode selection
|
|
SDIO_DCTRL_DMAEN EQU 0x0008 ; DMA enabled bit
|
|
|
|
SDIO_DCTRL_DBLOCKSIZE EQU 0x00F0 ; DBLOCKSIZE[3:0] bits (Data block size)
|
|
SDIO_DCTRL_DBLOCKSIZE_0 EQU 0x0010 ; Bit 0
|
|
SDIO_DCTRL_DBLOCKSIZE_1 EQU 0x0020 ; Bit 1
|
|
SDIO_DCTRL_DBLOCKSIZE_2 EQU 0x0040 ; Bit 2
|
|
SDIO_DCTRL_DBLOCKSIZE_3 EQU 0x0080 ; Bit 3
|
|
|
|
SDIO_DCTRL_RWSTART EQU 0x0100 ; Read wait start
|
|
SDIO_DCTRL_RWSTOP EQU 0x0200 ; Read wait stop
|
|
SDIO_DCTRL_RWMOD EQU 0x0400 ; Read wait mode
|
|
SDIO_DCTRL_SDIOEN EQU 0x0800 ; SD I/O enable functions
|
|
|
|
;***************** Bit definition for SDIO_DCOUNT register ****************
|
|
SDIO_DCOUNT_DATACOUNT EQU 0x01FFFFFF ; Data count value
|
|
|
|
;***************** Bit definition for SDIO_STA register *******************
|
|
SDIO_STA_CCRCFAIL EQU 0x00000001 ; Command response received (CRC check failed)
|
|
SDIO_STA_DCRCFAIL EQU 0x00000002 ; Data block sent/received (CRC check failed)
|
|
SDIO_STA_CTIMEOUT EQU 0x00000004 ; Command response timeout
|
|
SDIO_STA_DTIMEOUT EQU 0x00000008 ; Data timeout
|
|
SDIO_STA_TXUNDERR EQU 0x00000010 ; Transmit FIFO underrun error
|
|
SDIO_STA_RXOVERR EQU 0x00000020 ; Received FIFO overrun error
|
|
SDIO_STA_CMDREND EQU 0x00000040 ; Command response received (CRC check passed)
|
|
SDIO_STA_CMDSENT EQU 0x00000080 ; Command sent (no response required)
|
|
SDIO_STA_DATAEND EQU 0x00000100 ; Data end (data counter, SDIDCOUNT, is zero)
|
|
SDIO_STA_STBITERR EQU 0x00000200 ; Start bit not detected on all data signals in wide bus mode
|
|
SDIO_STA_DBCKEND EQU 0x00000400 ; Data block sent/received (CRC check passed)
|
|
SDIO_STA_CMDACT EQU 0x00000800 ; Command transfer in progress
|
|
SDIO_STA_TXACT EQU 0x00001000 ; Data transmit in progress
|
|
SDIO_STA_RXACT EQU 0x00002000 ; Data receive in progress
|
|
SDIO_STA_TXFIFOHE EQU 0x00004000 ; Transmit FIFO Half Empty: at least 8 words can be written into the FIFO
|
|
SDIO_STA_RXFIFOHF EQU 0x00008000 ; Receive FIFO Half Full: there are at least 8 words in the FIFO
|
|
SDIO_STA_TXFIFOF EQU 0x00010000 ; Transmit FIFO full
|
|
SDIO_STA_RXFIFOF EQU 0x00020000 ; Receive FIFO full
|
|
SDIO_STA_TXFIFOE EQU 0x00040000 ; Transmit FIFO empty
|
|
SDIO_STA_RXFIFOE EQU 0x00080000 ; Receive FIFO empty
|
|
SDIO_STA_TXDAVL EQU 0x00100000 ; Data available in transmit FIFO
|
|
SDIO_STA_RXDAVL EQU 0x00200000 ; Data available in receive FIFO
|
|
SDIO_STA_SDIOIT EQU 0x00400000 ; SDIO interrupt received
|
|
SDIO_STA_CEATAEND EQU 0x00800000 ; CE-ATA command completion signal received for CMD61
|
|
|
|
;****************** Bit definition for SDIO_ICR register ******************
|
|
SDIO_ICR_CCRCFAILC EQU 0x00000001 ; CCRCFAIL flag clear bit
|
|
SDIO_ICR_DCRCFAILC EQU 0x00000002 ; DCRCFAIL flag clear bit
|
|
SDIO_ICR_CTIMEOUTC EQU 0x00000004 ; CTIMEOUT flag clear bit
|
|
SDIO_ICR_DTIMEOUTC EQU 0x00000008 ; DTIMEOUT flag clear bit
|
|
SDIO_ICR_TXUNDERRC EQU 0x00000010 ; TXUNDERR flag clear bit
|
|
SDIO_ICR_RXOVERRC EQU 0x00000020 ; RXOVERR flag clear bit
|
|
SDIO_ICR_CMDRENDC EQU 0x00000040 ; CMDREND flag clear bit
|
|
SDIO_ICR_CMDSENTC EQU 0x00000080 ; CMDSENT flag clear bit
|
|
SDIO_ICR_DATAENDC EQU 0x00000100 ; DATAEND flag clear bit
|
|
SDIO_ICR_STBITERRC EQU 0x00000200 ; STBITERR flag clear bit
|
|
SDIO_ICR_DBCKENDC EQU 0x00000400 ; DBCKEND flag clear bit
|
|
SDIO_ICR_SDIOITC EQU 0x00400000 ; SDIOIT flag clear bit
|
|
SDIO_ICR_CEATAENDC EQU 0x00800000 ; CEATAEND flag clear bit
|
|
|
|
;***************** Bit definition for SDIO_MASK register ******************
|
|
SDIO_MASK_CCRCFAILIE EQU 0x00000001 ; Command CRC Fail Interrupt Enable
|
|
SDIO_MASK_DCRCFAILIE EQU 0x00000002 ; Data CRC Fail Interrupt Enable
|
|
SDIO_MASK_CTIMEOUTIE EQU 0x00000004 ; Command TimeOut Interrupt Enable
|
|
SDIO_MASK_DTIMEOUTIE EQU 0x00000008 ; Data TimeOut Interrupt Enable
|
|
SDIO_MASK_TXUNDERRIE EQU 0x00000010 ; Tx FIFO UnderRun Error Interrupt Enable
|
|
SDIO_MASK_RXOVERRIE EQU 0x00000020 ; Rx FIFO OverRun Error Interrupt Enable
|
|
SDIO_MASK_CMDRENDIE EQU 0x00000040 ; Command Response Received Interrupt Enable
|
|
SDIO_MASK_CMDSENTIE EQU 0x00000080 ; Command Sent Interrupt Enable
|
|
SDIO_MASK_DATAENDIE EQU 0x00000100 ; Data End Interrupt Enable
|
|
SDIO_MASK_STBITERRIE EQU 0x00000200 ; Start Bit Error Interrupt Enable
|
|
SDIO_MASK_DBCKENDIE EQU 0x00000400 ; Data Block End Interrupt Enable
|
|
SDIO_MASK_CMDACTIE EQU 0x00000800 ; Command Acting Interrupt Enable
|
|
SDIO_MASK_TXACTIE EQU 0x00001000 ; Data Transmit Acting Interrupt Enable
|
|
SDIO_MASK_RXACTIE EQU 0x00002000 ; Data receive acting interrupt enabled
|
|
SDIO_MASK_TXFIFOHEIE EQU 0x00004000 ; Tx FIFO Half Empty interrupt Enable
|
|
SDIO_MASK_RXFIFOHFIE EQU 0x00008000 ; Rx FIFO Half Full interrupt Enable
|
|
SDIO_MASK_TXFIFOFIE EQU 0x00010000 ; Tx FIFO Full interrupt Enable
|
|
SDIO_MASK_RXFIFOFIE EQU 0x00020000 ; Rx FIFO Full interrupt Enable
|
|
SDIO_MASK_TXFIFOEIE EQU 0x00040000 ; Tx FIFO Empty interrupt Enable
|
|
SDIO_MASK_RXFIFOEIE EQU 0x00080000 ; Rx FIFO Empty interrupt Enable
|
|
SDIO_MASK_TXDAVLIE EQU 0x00100000 ; Data available in Tx FIFO interrupt Enable
|
|
SDIO_MASK_RXDAVLIE EQU 0x00200000 ; Data available in Rx FIFO interrupt Enable
|
|
SDIO_MASK_SDIOITIE EQU 0x00400000 ; SDIO Mode Interrupt Received interrupt Enable
|
|
SDIO_MASK_CEATAENDIE EQU 0x00800000 ; CE-ATA command completion signal received Interrupt Enable
|
|
|
|
;**************** Bit definition for SDIO_FIFOCNT register ****************
|
|
SDIO_FIFOCNT_FIFOCOUNT EQU 0x00FFFFFF ; Remaining number of words to be written to or read from the FIFO
|
|
|
|
;***************** Bit definition for SDIO_FIFO register ******************
|
|
SDIO_FIFO_FIFODATA EQU 0xFFFFFFFF ; Receive and transmit FIFO data
|
|
|
|
END
|
|
|