You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
96 lines
5.3 KiB
96 lines
5.3 KiB
;********************************************************************************
|
|
; SOUBOR : INI_BITS_SPI.S
|
|
; AUTOR : Petr Dousa, Ondrej Hruska
|
|
; DATUM : 10/2015
|
|
; POPIS : Bitove masky ridicich registru pro SPI
|
|
;
|
|
; Toto je soucast knihovny pro STM32L100 vyvijene na Katedre mereni FEL CVUT.
|
|
;********************************************************************************
|
|
|
|
|
|
;****************************************************************************
|
|
;
|
|
; Serial Peripheral Interface (SPI)
|
|
;
|
|
;****************************************************************************
|
|
|
|
;****************** Bit definition for SPI_CR1 register *******************
|
|
SPI_CR1_CPHA EQU 0x0001 ; Clock Phase
|
|
SPI_CR1_CPOL EQU 0x0002 ; Clock Polarity
|
|
SPI_CR1_MSTR EQU 0x0004 ; Master Selection
|
|
|
|
SPI_CR1_BR EQU 0x0038 ; BR[2:0] bits (Baud Rate Control)
|
|
SPI_CR1_BR_0 EQU 0x0008 ; Bit 0
|
|
SPI_CR1_BR_1 EQU 0x0010 ; Bit 1
|
|
SPI_CR1_BR_2 EQU 0x0020 ; Bit 2
|
|
|
|
SPI_CR1_SPE EQU 0x0040 ; SPI Enable
|
|
SPI_CR1_LSBFIRST EQU 0x0080 ; Frame Format
|
|
SPI_CR1_SSI EQU 0x0100 ; Internal slave select
|
|
SPI_CR1_SSM EQU 0x0200 ; Software slave management
|
|
SPI_CR1_RXONLY EQU 0x0400 ; Receive only
|
|
SPI_CR1_DFF EQU 0x0800 ; Data Frame Format
|
|
SPI_CR1_CRCNEXT EQU 0x1000 ; Transmit CRC next
|
|
SPI_CR1_CRCEN EQU 0x2000 ; Hardware CRC calculation enable
|
|
SPI_CR1_BIDIOE EQU 0x4000 ; Output enable in bidirectional mode
|
|
SPI_CR1_BIDIMODE EQU 0x8000 ; Bidirectional data mode enable
|
|
|
|
;****************** Bit definition for SPI_CR2 register *******************
|
|
SPI_CR2_RXDMAEN EQU 0x01 ; Rx Buffer DMA Enable
|
|
SPI_CR2_TXDMAEN EQU 0x02 ; Tx Buffer DMA Enable
|
|
SPI_CR2_SSOE EQU 0x04 ; SS Output Enable
|
|
SPI_CR2_FRF EQU 0x08 ; Frame format
|
|
SPI_CR2_ERRIE EQU 0x20 ; Error Interrupt Enable
|
|
SPI_CR2_RXNEIE EQU 0x40 ; RX buffer Not Empty Interrupt Enable
|
|
SPI_CR2_TXEIE EQU 0x80 ; Tx buffer Empty Interrupt Enable
|
|
|
|
;******************* Bit definition for SPI_SR register *******************
|
|
SPI_SR_RXNE EQU 0x01 ; Receive buffer Not Empty
|
|
SPI_SR_TXE EQU 0x02 ; Transmit buffer Empty
|
|
SPI_SR_CHSIDE EQU 0x04 ; Channel side
|
|
SPI_SR_UDR EQU 0x08 ; Underrun flag
|
|
SPI_SR_CRCERR EQU 0x10 ; CRC Error flag
|
|
SPI_SR_MODF EQU 0x20 ; Mode fault
|
|
SPI_SR_OVR EQU 0x40 ; Overrun flag
|
|
SPI_SR_BSY EQU 0x80 ; Busy flag
|
|
|
|
;******************* Bit definition for SPI_DR register *******************
|
|
SPI_DR_DR EQU 0xFFFF ; Data Register
|
|
|
|
;****************** Bit definition for SPI_CRCPR register *****************
|
|
SPI_CRCPR_CRCPOLY EQU 0xFFFF ; CRC polynomial register
|
|
|
|
;***************** Bit definition for SPI_RXCRCR register *****************
|
|
SPI_RXCRCR_RXCRC EQU 0xFFFF ; Rx CRC Register
|
|
|
|
;***************** Bit definition for SPI_TXCRCR register *****************
|
|
SPI_TXCRCR_TXCRC EQU 0xFFFF ; Tx CRC Register
|
|
|
|
;***************** Bit definition for SPI_I2SCFGR register ****************
|
|
SPI_I2SCFGR_CHLEN EQU 0x0001 ; Channel length (number of bits per audio channel)
|
|
|
|
SPI_I2SCFGR_DATLEN EQU 0x0006 ; DATLEN[1:0] bits (Data length to be transferred)
|
|
SPI_I2SCFGR_DATLEN_0 EQU 0x0002 ; Bit 0
|
|
SPI_I2SCFGR_DATLEN_1 EQU 0x0004 ; Bit 1
|
|
|
|
SPI_I2SCFGR_CKPOL EQU 0x0008 ; steady state clock polarity
|
|
|
|
SPI_I2SCFGR_I2SSTD EQU 0x0030 ; I2SSTD[1:0] bits (I2S standard selection)
|
|
SPI_I2SCFGR_I2SSTD_0 EQU 0x0010 ; Bit 0
|
|
SPI_I2SCFGR_I2SSTD_1 EQU 0x0020 ; Bit 1
|
|
|
|
SPI_I2SCFGR_PCMSYNC EQU 0x0080 ; PCM frame synchronization
|
|
|
|
SPI_I2SCFGR_I2SCFG EQU 0x0300 ; I2SCFG[1:0] bits (I2S configuration mode)
|
|
SPI_I2SCFGR_I2SCFG_0 EQU 0x0100 ; Bit 0
|
|
SPI_I2SCFGR_I2SCFG_1 EQU 0x0200 ; Bit 1
|
|
|
|
SPI_I2SCFGR_I2SE EQU 0x0400 ; I2S Enable
|
|
SPI_I2SCFGR_I2SMOD EQU 0x0800 ; I2S mode selection
|
|
|
|
;***************** Bit definition for SPI_I2SPR register ******************
|
|
SPI_I2SPR_I2SDIV EQU 0x00FF ; I2S Linear prescaler
|
|
SPI_I2SPR_ODD EQU 0x0100 ; Odd factor for the prescaler
|
|
SPI_I2SPR_MCKOE EQU 0x0200 ; Master Clock Output Enable
|
|
|
|
END
|
|
|