You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
560 lines
21 KiB
560 lines
21 KiB
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal_rtc_ex.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.4
|
|
* @date 29-April-2016
|
|
* @brief Header file of RTC HAL Extension module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F1xx_HAL_RTC_EX_H
|
|
#define __STM32F1xx_HAL_RTC_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RTCEx
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RTCEx_Private_Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Alias_For_Legacy Alias define maintained for legacy
|
|
* @{
|
|
*/
|
|
#define HAL_RTCEx_TamperTimeStampIRQHandler HAL_RTCEx_TamperIRQHandler
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
|
|
* @{
|
|
*/
|
|
#define IS_RTC_TAMPER(__TAMPER__) ((__TAMPER__) == RTC_TAMPER_1)
|
|
|
|
#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
|
|
((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL))
|
|
|
|
#if RTC_BKP_NUMBER > 10
|
|
#define IS_RTC_BKP(BKP) (((BKP) <= (uint32_t) RTC_BKP_DR10) || (((BKP) >= (uint32_t) RTC_BKP_DR11) && ((BKP) <= (uint32_t) RTC_BKP_DR42)))
|
|
#else
|
|
#define IS_RTC_BKP(BKP) ((BKP) <= (uint32_t) RTC_BKP_NUMBER)
|
|
#endif
|
|
#define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x0000007F)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief RTC Tamper structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t Tamper; /*!< Specifies the Tamper Pin.
|
|
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
|
|
|
|
uint32_t Trigger; /*!< Specifies the Tamper Trigger.
|
|
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
|
|
|
|
}RTC_TamperTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Pins_Definitions Tamper Pins Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPER_1 BKP_CR_TPE /*!< Select tamper to be enabled (mainly for legacy purposes) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Trigger_Definitions Tamper Trigger Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPERTRIGGER_LOWLEVEL BKP_CR_TPAL /*!< A high level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
|
|
#define RTC_TAMPERTRIGGER_HIGHLEVEL ((uint32_t)0x00000000) /*!< A low level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Backup_Registers_Definitions Backup Registers Definitions
|
|
* @{
|
|
*/
|
|
#if RTC_BKP_NUMBER > 0
|
|
#define RTC_BKP_DR1 ((uint32_t)0x00000001)
|
|
#define RTC_BKP_DR2 ((uint32_t)0x00000002)
|
|
#define RTC_BKP_DR3 ((uint32_t)0x00000003)
|
|
#define RTC_BKP_DR4 ((uint32_t)0x00000004)
|
|
#define RTC_BKP_DR5 ((uint32_t)0x00000005)
|
|
#define RTC_BKP_DR6 ((uint32_t)0x00000006)
|
|
#define RTC_BKP_DR7 ((uint32_t)0x00000007)
|
|
#define RTC_BKP_DR8 ((uint32_t)0x00000008)
|
|
#define RTC_BKP_DR9 ((uint32_t)0x00000009)
|
|
#define RTC_BKP_DR10 ((uint32_t)0x0000000A)
|
|
#endif /* RTC_BKP_NUMBER > 0 */
|
|
|
|
#if RTC_BKP_NUMBER > 10
|
|
#define RTC_BKP_DR11 ((uint32_t)0x00000010)
|
|
#define RTC_BKP_DR12 ((uint32_t)0x00000011)
|
|
#define RTC_BKP_DR13 ((uint32_t)0x00000012)
|
|
#define RTC_BKP_DR14 ((uint32_t)0x00000013)
|
|
#define RTC_BKP_DR15 ((uint32_t)0x00000014)
|
|
#define RTC_BKP_DR16 ((uint32_t)0x00000015)
|
|
#define RTC_BKP_DR17 ((uint32_t)0x00000016)
|
|
#define RTC_BKP_DR18 ((uint32_t)0x00000017)
|
|
#define RTC_BKP_DR19 ((uint32_t)0x00000018)
|
|
#define RTC_BKP_DR20 ((uint32_t)0x00000019)
|
|
#define RTC_BKP_DR21 ((uint32_t)0x0000001A)
|
|
#define RTC_BKP_DR22 ((uint32_t)0x0000001B)
|
|
#define RTC_BKP_DR23 ((uint32_t)0x0000001C)
|
|
#define RTC_BKP_DR24 ((uint32_t)0x0000001D)
|
|
#define RTC_BKP_DR25 ((uint32_t)0x0000001E)
|
|
#define RTC_BKP_DR26 ((uint32_t)0x0000001F)
|
|
#define RTC_BKP_DR27 ((uint32_t)0x00000020)
|
|
#define RTC_BKP_DR28 ((uint32_t)0x00000021)
|
|
#define RTC_BKP_DR29 ((uint32_t)0x00000022)
|
|
#define RTC_BKP_DR30 ((uint32_t)0x00000023)
|
|
#define RTC_BKP_DR31 ((uint32_t)0x00000024)
|
|
#define RTC_BKP_DR32 ((uint32_t)0x00000025)
|
|
#define RTC_BKP_DR33 ((uint32_t)0x00000026)
|
|
#define RTC_BKP_DR34 ((uint32_t)0x00000027)
|
|
#define RTC_BKP_DR35 ((uint32_t)0x00000028)
|
|
#define RTC_BKP_DR36 ((uint32_t)0x00000029)
|
|
#define RTC_BKP_DR37 ((uint32_t)0x0000002A)
|
|
#define RTC_BKP_DR38 ((uint32_t)0x0000002B)
|
|
#define RTC_BKP_DR39 ((uint32_t)0x0000002C)
|
|
#define RTC_BKP_DR40 ((uint32_t)0x0000002D)
|
|
#define RTC_BKP_DR41 ((uint32_t)0x0000002E)
|
|
#define RTC_BKP_DR42 ((uint32_t)0x0000002F)
|
|
#endif /* RTC_BKP_NUMBER > 10 */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable the RTC Tamper interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled
|
|
* This parameter can be any combination of the following values:
|
|
* @arg RTC_IT_TAMP1: Tamper A interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT(BKP->CSR, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the RTC Tamper interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg RTC_IT_TAMP1: Tamper A interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT(BKP->CSR, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TAMP1
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & ((__INTERRUPT__))) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Get the selected RTC Tamper's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_TAMP1F
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) ((((BKP->CSR) & (__FLAG__)) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Get the selected RTC Tamper's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TAMP1
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & (BKP_CSR_TEF)) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Clear the RTC Tamper's pending flags.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_TAMP1F
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT(BKP->CSR, BKP_CSR_CTE | BKP_CSR_CTI)
|
|
|
|
/**
|
|
* @brief Enable the RTC Second interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled
|
|
* This parameter can be any combination of the following values:
|
|
* @arg RTC_IT_SEC: Second A interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_SECOND_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the RTC Second interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Second interrupt sources to be disabled.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg RTC_IT_SEC: Second A interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_SECOND_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC Second interrupt has occurred or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_SEC: Second A interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_SECOND_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Get the selected RTC Second's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_SEC
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_SECOND_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Clear the RTC Second's pending flags.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_SEC
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_SECOND_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)
|
|
|
|
/**
|
|
* @brief Enable the RTC Overflow interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled
|
|
* This parameter can be any combination of the following values:
|
|
* @arg RTC_IT_OW: Overflow A interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_OVERFLOW_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the RTC Overflow interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be disabled.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg RTC_IT_OW: Overflow A interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_OVERFLOW_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC Overflow interrupt has occurred or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_OW: Overflow A interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_OVERFLOW_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__))) ) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Get the selected RTC Overflow's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_OW
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_OVERFLOW_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Clear the RTC Overflow's pending flags.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_OW
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_OVERFLOW_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup RTCEx_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/* RTC Tamper functions *****************************************/
|
|
/** @addtogroup RTCEx_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Sets Tamper
|
|
* @note By calling this API we disable the tamper interrupt for all tampers.
|
|
* @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
|
|
* the configuration information for RTC.
|
|
* @param sTamper: Pointer to Tamper Structure.
|
|
* @note Tamper can be enabled only if ASOE and CCO bit are reset
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Sets Tamper
|
|
* @note By calling this API we disable the tamper interrupt for all tampers.
|
|
* @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
|
|
* the configuration information for RTC.
|
|
* @param sTamper: Pointer to Tamper Structure.
|
|
* @note Tamper can be enabled only if ASOE and CCO bit are reset
|
|
* @retval HAL status
|
|
*/
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Sets Tamper with interrupt.
|
|
* @note By calling this API we force the tamper interrupt for all tampers.
|
|
* @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
|
|
* the configuration information for RTC.
|
|
* @param sTamper: Pointer to RTC Tamper.
|
|
* @note Tamper can be enabled only if ASOE and CCO bit are reset
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Deactivates Tamper.
|
|
* @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
|
|
* the configuration information for RTC.
|
|
* @param Tamper: Selected tamper pin.
|
|
* This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief This function handles Tamper interrupt request.
|
|
* @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
|
|
* the configuration information for RTC.
|
|
* @retval None
|
|
*/
|
|
void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc);
|
|
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief This function handles Tamper1 Polling.
|
|
* @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
|
|
* the configuration information for RTC.
|
|
* @param Timeout: Timeout duration
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* RTC Second functions *****************************************/
|
|
/** @addtogroup RTCEx_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Sets Interrupt for second
|
|
* @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
|
|
* the configuration information for RTC.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Deactivates Second.
|
|
* @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
|
|
* the configuration information for RTC.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief This function handles second interrupt request.
|
|
* @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
|
|
* the configuration information for RTC.
|
|
* @retval None
|
|
*/
|
|
void HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef* hrtc);
|
|
void HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc);
|
|
void HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Extension Control functions ************************************************/
|
|
/** @addtogroup RTCEx_Exported_Functions_Group3
|
|
* @{
|
|
*/
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Writes a data in a specified RTC Backup data register.
|
|
* @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
|
|
* the configuration information for RTC.
|
|
* @param BackupRegister: RTC Backup data Register number.
|
|
* This parameter can be: RTC_BKP_DRx where x can be from 1 to 10 (or 42) to
|
|
* specify the register (depending devices).
|
|
* @param Data: Data to be written in the specified RTC Backup data register.
|
|
* @retval None
|
|
*/
|
|
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Reads data from the specified RTC Backup data Register.
|
|
* @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
|
|
* the configuration information for RTC.
|
|
* @param BackupRegister: RTC Backup data Register number.
|
|
* This parameter can be: RTC_BKP_DRx where x can be from 1 to 10 (or 42) to
|
|
* specify the register (depending devices).
|
|
* @retval Read value
|
|
*/
|
|
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
|
|
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Sets the Smooth calibration parameters.
|
|
* @param hrtc: RTC handle
|
|
* @param SmoothCalibPeriod: Not used (only present for compatibility with another families)
|
|
* @param SmoothCalibPlusPulses: Not used (only present for compatibility with another families)
|
|
* @param SmouthCalibMinusPulsesValue: specifies the RTC Clock Calibration value.
|
|
* This parameter must be a number between 0 and 0x7F.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F1xx_HAL_RTC_EX_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|