You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
585 lines
20 KiB
585 lines
20 KiB
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.4
|
|
* @date 29-April-2016
|
|
* @brief This file contains all the functions prototypes for the HAL
|
|
* module driver.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F1xx_HAL_H
|
|
#define __STM32F1xx_HAL_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal_conf.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup HAL
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/* Exported constants --------------------------------------------------------*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
|
|
/** @defgroup HAL_Exported_Macros HAL Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode
|
|
* @brief Freeze/Unfreeze Peripherals in Debug mode
|
|
* Note: On devices STM32F10xx8 and STM32F10xxB,
|
|
* STM32F101xC/D/E and STM32F103xC/D/E,
|
|
* STM32F101xF/G and STM32F103xF/G
|
|
* STM32F10xx4 and STM32F10xx6
|
|
* Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
|
|
* debug mode (not accessible by the user software in normal mode).
|
|
* Refer to errata sheet of these devices for more details.
|
|
* @{
|
|
*/
|
|
|
|
/* Peripherals on APB1 */
|
|
/**
|
|
* @brief TIM2 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
|
|
|
|
/**
|
|
* @brief TIM3 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM4_STOP)
|
|
/**
|
|
* @brief TIM4 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM5_STOP)
|
|
/**
|
|
* @brief TIM5 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM6_STOP)
|
|
/**
|
|
* @brief TIM6 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM7_STOP)
|
|
/**
|
|
* @brief TIM7 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM12_STOP)
|
|
/**
|
|
* @brief TIM12 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM12() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM12() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM13_STOP)
|
|
/**
|
|
* @brief TIM13 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM13() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM13() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM14_STOP)
|
|
/**
|
|
* @brief TIM14 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
|
|
#endif
|
|
|
|
/**
|
|
* @brief WWDG Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
|
|
|
|
/**
|
|
* @brief IWDG Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
|
|
|
|
/**
|
|
* @brief I2C1 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
|
|
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
|
|
|
|
#if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
|
|
/**
|
|
* @brief I2C2 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
|
|
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_CAN1_STOP)
|
|
/**
|
|
* @brief CAN1 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_CAN1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_CAN1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_CAN2_STOP)
|
|
/**
|
|
* @brief CAN2 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_CAN2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_CAN2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
|
|
#endif
|
|
|
|
/* Peripherals on APB2 */
|
|
#if defined (DBGMCU_CR_DBG_TIM1_STOP)
|
|
/**
|
|
* @brief TIM1 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM8_STOP)
|
|
/**
|
|
* @brief TIM8 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM8() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM8() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM9_STOP)
|
|
/**
|
|
* @brief TIM9 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM10_STOP)
|
|
/**
|
|
* @brief TIM10 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM10() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM10() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM11_STOP)
|
|
/**
|
|
* @brief TIM11 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM11() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM11() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
|
|
#endif
|
|
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM15_STOP)
|
|
/**
|
|
* @brief TIM15 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM16_STOP)
|
|
/**
|
|
* @brief TIM16 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
|
|
#endif
|
|
|
|
#if defined (DBGMCU_CR_DBG_TIM17_STOP)
|
|
/**
|
|
* @brief TIM17 Peripherals Debug mode
|
|
*/
|
|
#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
|
|
#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @addtogroup HAL_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup HAL_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
|
|
/* Initialization and de-initialization functions ******************************/
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief This function configures the Flash prefetch,
|
|
* Configures time base source, NVIC and Low level hardware
|
|
* @note This function is called at the beginning of program after reset and before
|
|
* the clock configuration
|
|
* @note The time base configuration is based on MSI clock when exiting from Reset.
|
|
* Once done, time base tick start incrementing.
|
|
* In the default implementation,Systick is used as source of time base.
|
|
* The tick variable is incremented each 1ms in its ISR.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_Init(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief This function de-Initializes common part of the HAL and stops the source
|
|
* of time base.
|
|
* @note This function is optional.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DeInit(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Initializes the MSP.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_MspInit(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief DeInitializes the MSP.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_MspDeInit(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief This function configures the Flash prefetch,
|
|
* Configures time base source, NVIC and Low level hardware
|
|
* @note This function is called at the beginning of program after reset and before
|
|
* the clock configuration
|
|
* @note The time base configuration is based on MSI clock when exiting from Reset.
|
|
* Once done, time base tick start incrementing.
|
|
* In the default implementation,Systick is used as source of time base.
|
|
* The tick variable is incremented each 1ms in its ISR.
|
|
* @retval HAL status
|
|
*/
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief This function configures the source of the time base.
|
|
* The time source is configured to have 1ms time base with a dedicated
|
|
* Tick interrupt priority.
|
|
* @note This function is called automatically at the beginning of program after
|
|
* reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
|
|
* @note In the default implementation, SysTick timer is the source of time base.
|
|
* It is used to generate interrupts at regular time intervals.
|
|
* Care must be taken if HAL_Delay() is called from a peripheral ISR process,
|
|
* The the SysTick interrupt must have higher priority (numerically lower)
|
|
* than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
* The function is declared as __Weak to be overwritten in case of other
|
|
* implementation in user file.
|
|
* @param TickPriority: Tick interrupt priority.
|
|
* @retval HAL status
|
|
*/
|
|
__weak HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup HAL_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
|
|
/* Peripheral Control functions ************************************************/
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief This function is called to increment a global variable "uwTick"
|
|
* used as application time base.
|
|
* @note In the default implementation, this variable is incremented each 1ms
|
|
* in Systick ISR.
|
|
* @note This function is declared as __weak to be overwritten in case of other
|
|
* implementations in user file.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_IncTick(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief This function provides accurate delay (in milliseconds) based
|
|
* on variable incremented.
|
|
* @note In the default implementation , SysTick timer is the source of time base.
|
|
* It is used to generate interrupts at regular time intervals where uwTick
|
|
* is incremented.
|
|
* @note ThiS function is declared as __weak to be overwritten in case of other
|
|
* implementations in user file.
|
|
* @param Delay: specifies the delay time length, in milliseconds.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_Delay(__IO uint32_t Delay);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Provides a tick value in millisecond.
|
|
* @note This function is declared as __weak to be overwritten in case of other
|
|
* implementations in user file.
|
|
* @retval tick value
|
|
*/
|
|
__weak uint32_t HAL_GetTick(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Suspend Tick increment.
|
|
* @note In the default implementation , SysTick timer is the source of time base. It is
|
|
* used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
|
|
* is called, the the SysTick interrupt will be disabled and so Tick increment
|
|
* is suspended.
|
|
* @note This function is declared as __weak to be overwritten in case of other
|
|
* implementations in user file.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_SuspendTick(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Resume Tick increment.
|
|
* @note In the default implementation , SysTick timer is the source of time base. It is
|
|
* used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
|
|
* is called, the the SysTick interrupt will be enabled and so Tick increment
|
|
* is resumed.
|
|
* @note This function is declared as __weak to be overwritten in case of other
|
|
* implementations in user file.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_ResumeTick(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief This method returns the HAL revision
|
|
* @retval version: 0xXYZR (8bits for each decimal, R for RC)
|
|
*/
|
|
uint32_t HAL_GetHalVersion(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Returns the device revision identifier.
|
|
* Note: On devices STM32F10xx8 and STM32F10xxB,
|
|
* STM32F101xC/D/E and STM32F103xC/D/E,
|
|
* STM32F101xF/G and STM32F103xF/G
|
|
* STM32F10xx4 and STM32F10xx6
|
|
* Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
|
|
* debug mode (not accessible by the user software in normal mode).
|
|
* Refer to errata sheet of these devices for more details.
|
|
* @retval Device revision identifier
|
|
*/
|
|
uint32_t HAL_GetREVID(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Returns the device identifier.
|
|
* Note: On devices STM32F10xx8 and STM32F10xxB,
|
|
* STM32F101xC/D/E and STM32F103xC/D/E,
|
|
* STM32F101xF/G and STM32F103xF/G
|
|
* STM32F10xx4 and STM32F10xx6
|
|
* Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
|
|
* debug mode (not accessible by the user software in normal mode).
|
|
* Refer to errata sheet of these devices for more details.
|
|
* @retval Device identifier
|
|
*/
|
|
uint32_t HAL_GetDEVID(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Enable the Debug Module during SLEEP mode
|
|
* @retval None
|
|
*/
|
|
void HAL_DBGMCU_EnableDBGSleepMode(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Disable the Debug Module during SLEEP mode
|
|
* Note: On devices STM32F10xx8 and STM32F10xxB,
|
|
* STM32F101xC/D/E and STM32F103xC/D/E,
|
|
* STM32F101xF/G and STM32F103xF/G
|
|
* STM32F10xx4 and STM32F10xx6
|
|
* Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
|
|
* debug mode (not accessible by the user software in normal mode).
|
|
* Refer to errata sheet of these devices for more details.
|
|
* @retval None
|
|
*/
|
|
void HAL_DBGMCU_DisableDBGSleepMode(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Enable the Debug Module during STOP mode
|
|
* Note: On devices STM32F10xx8 and STM32F10xxB,
|
|
* STM32F101xC/D/E and STM32F103xC/D/E,
|
|
* STM32F101xF/G and STM32F103xF/G
|
|
* STM32F10xx4 and STM32F10xx6
|
|
* Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
|
|
* debug mode (not accessible by the user software in normal mode).
|
|
* Refer to errata sheet of these devices for more details.
|
|
* Note: On all STM32F1 devices:
|
|
* If the system tick timer interrupt is enabled during the Stop mode
|
|
* debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup
|
|
* the system from Stop mode.
|
|
* Workaround: To debug the Stop mode, disable the system tick timer
|
|
* interrupt.
|
|
* Refer to errata sheet of these devices for more details.
|
|
* Note: On all STM32F1 devices:
|
|
* If the system tick timer interrupt is enabled during the Stop mode
|
|
* debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup
|
|
* the system from Stop mode.
|
|
* Workaround: To debug the Stop mode, disable the system tick timer
|
|
* interrupt.
|
|
* Refer to errata sheet of these devices for more details.
|
|
* @retval None
|
|
*/
|
|
void HAL_DBGMCU_EnableDBGStopMode(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Disable the Debug Module during STOP mode
|
|
* Note: On devices STM32F10xx8 and STM32F10xxB,
|
|
* STM32F101xC/D/E and STM32F103xC/D/E,
|
|
* STM32F101xF/G and STM32F103xF/G
|
|
* STM32F10xx4 and STM32F10xx6
|
|
* Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
|
|
* debug mode (not accessible by the user software in normal mode).
|
|
* Refer to errata sheet of these devices for more details.
|
|
* @retval None
|
|
*/
|
|
void HAL_DBGMCU_DisableDBGStopMode(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Enable the Debug Module during STANDBY mode
|
|
* Note: On devices STM32F10xx8 and STM32F10xxB,
|
|
* STM32F101xC/D/E and STM32F103xC/D/E,
|
|
* STM32F101xF/G and STM32F103xF/G
|
|
* STM32F10xx4 and STM32F10xx6
|
|
* Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
|
|
* debug mode (not accessible by the user software in normal mode).
|
|
* Refer to errata sheet of these devices for more details.
|
|
* @retval None
|
|
*/
|
|
void HAL_DBGMCU_EnableDBGStandbyMode(void);
|
|
|
|
|
|
/*- injected dox -*/
|
|
/**
|
|
* @brief Disable the Debug Module during STANDBY mode
|
|
* Note: On devices STM32F10xx8 and STM32F10xxB,
|
|
* STM32F101xC/D/E and STM32F103xC/D/E,
|
|
* STM32F101xF/G and STM32F103xF/G
|
|
* STM32F10xx4 and STM32F10xx6
|
|
* Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
|
|
* debug mode (not accessible by the user software in normal mode).
|
|
* Refer to errata sheet of these devices for more details.
|
|
* @retval None
|
|
*/
|
|
void HAL_DBGMCU_DisableDBGStandbyMode(void);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F1xx_HAL_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|