B3M38SPD seminar project - beehive monitor with LoRa reporting
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
spd-lorabees/Drivers/BSP/sx1272mb2das/sx1272mb2das.c

263 lines
7.9 KiB

/*
/ _____) _ | |
( (____ _____ ____ _| |_ _____ ____| |__
\____ \| ___ | (_ _) ___ |/ ___) _ \
_____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
(C)2013 Semtech
Description: SX1272 driver specific target board functions implementation
License: Revised BSD License, see LICENSE.TXT file include in the project
Maintainer: Miguel Luis and Gregory Cristian
*/
/*******************************************************************************
* @file sx1272mb2das.c
* @author MCD Application Team
* @version V1.0.4
* @date 08-September-2017
* @brief driver sx1272mb2das board
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "hw.h"
#include "sx1272.h"
#include "radio.h"
#include "sx1272mb2das.h"
#define IRQ_HIGH_PRIORITY 0
/*!
* Flag used to set the RF switch control pins in low power mode when the radio is not active.
*/
void SX1272SetXO( uint8_t state );
uint32_t SX1272GetWakeTime( void );
void SX1272IoIrqInit( DioIrqHandler **irqHandlers );
uint8_t SX1272GetPaSelect( uint32_t channel );
void SX1272SetAntSwLowPower( bool status );
void SX1272SetRfTxPower( int8_t power );
void SX1272SetAntSw( uint8_t opMode );
/*!
* \brief Controls the antena switch if necessary.
*
* \remark see errata note
*
* \param [IN] opMode Current radio operating mode
*/
static LoRaBoardCallback_t BoardCallbacks = { SX1272SetXO,
SX1272GetWakeTime,
SX1272IoIrqInit,
SX1272SetRfTxPower,
SX1272SetAntSwLowPower,
SX1272SetAntSw};
/*!
* Radio driver structure initialization
*/
const struct Radio_s Radio =
{
SX1272IoInit,
SX1272IoDeInit,
SX1272Init,
SX1272GetStatus,
SX1272SetModem,
SX1272SetChannel,
SX1272IsChannelFree,
SX1272Random,
SX1272SetRxConfig,
SX1272SetTxConfig,
SX1272CheckRfFrequency,
SX1272GetTimeOnAir,
SX1272Send,
SX1272SetSleep,
SX1272SetStby,
SX1272SetRx,
SX1272StartCad,
SX1272SetTxContinuousWave,
SX1272ReadRssi,
SX1272Write,
SX1272Read,
SX1272WriteBuffer,
SX1272ReadBuffer,
SX1272SetMaxPayloadLength,
SX1272SetPublicNetwork,
SX1272GetRadioWakeUpTime
};
uint32_t SX1272GetWakeTime( void )
{
return BOARD_WAKEUP_TIME;
}
void SX1272SetXO( uint8_t state )
{
}
void SX1272IoInit( void )
{
GPIO_InitTypeDef initStruct={0};
SX1272BoardInit( &BoardCallbacks );
initStruct.Mode = GPIO_MODE_IT_RISING;
initStruct.Pull = GPIO_PULLDOWN;
initStruct.Speed = GPIO_SPEED_HIGH;
HW_GPIO_Init( RADIO_DIO_0_PORT, RADIO_DIO_0_PIN, &initStruct );
HW_GPIO_Init( RADIO_DIO_1_PORT, RADIO_DIO_1_PIN, &initStruct );
HW_GPIO_Init( RADIO_DIO_2_PORT, RADIO_DIO_2_PIN, &initStruct );
HW_GPIO_Init( RADIO_DIO_3_PORT, RADIO_DIO_3_PIN, &initStruct );
}
void SX1272IoIrqInit( DioIrqHandler **irqHandlers )
{
HW_GPIO_SetIrq( RADIO_DIO_0_PORT, RADIO_DIO_0_PIN, IRQ_HIGH_PRIORITY, irqHandlers[0] );
HW_GPIO_SetIrq( RADIO_DIO_1_PORT, RADIO_DIO_1_PIN, IRQ_HIGH_PRIORITY, irqHandlers[1] );
HW_GPIO_SetIrq( RADIO_DIO_2_PORT, RADIO_DIO_2_PIN, IRQ_HIGH_PRIORITY, irqHandlers[2] );
HW_GPIO_SetIrq( RADIO_DIO_3_PORT, RADIO_DIO_3_PIN, IRQ_HIGH_PRIORITY, irqHandlers[3] );
}
void SX1272IoDeInit( void )
{
GPIO_InitTypeDef initStruct={0};
initStruct.Mode = GPIO_MODE_IT_RISING ;//GPIO_MODE_ANALOG;
initStruct.Pull = GPIO_PULLDOWN;
HW_GPIO_Init( RADIO_DIO_0_PORT, RADIO_DIO_0_PIN, &initStruct );
HW_GPIO_Init( RADIO_DIO_1_PORT, RADIO_DIO_1_PIN, &initStruct );
HW_GPIO_Init( RADIO_DIO_2_PORT, RADIO_DIO_2_PIN, &initStruct );
HW_GPIO_Init( RADIO_DIO_3_PORT, RADIO_DIO_3_PIN, &initStruct );
}
void SX1272SetRfTxPower( int8_t power )
{
uint8_t paConfig = 0;
uint8_t paDac = 0;
paConfig = SX1272Read( REG_PACONFIG );
paDac = SX1272Read( REG_PADAC );
paConfig = ( paConfig & RF_PACONFIG_PASELECT_MASK ) | SX1272GetPaSelect( SX1272.Settings.Channel );
if( ( paConfig & RF_PACONFIG_PASELECT_PABOOST ) == RF_PACONFIG_PASELECT_PABOOST )
{
if( power > 17 )
{
paDac = ( paDac & RF_PADAC_20DBM_MASK ) | RF_PADAC_20DBM_ON;
}
else
{
paDac = ( paDac & RF_PADAC_20DBM_MASK ) | RF_PADAC_20DBM_OFF;
}
if( ( paDac & RF_PADAC_20DBM_ON ) == RF_PADAC_20DBM_ON )
{
if( power < 5 )
{
power = 5;
}
if( power > 20 )
{
power = 20;
}
paConfig = ( paConfig & RFLR_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power - 5 ) & 0x0F );
}
else
{
if( power < 2 )
{
power = 2;
}
if( power > 17 )
{
power = 17;
}
paConfig = ( paConfig & RFLR_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power - 2 ) & 0x0F );
}
}
else
{
if( power < -1 )
{
power = -1;
}
if( power > 14 )
{
power = 14;
}
paConfig = ( paConfig & RFLR_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power + 1 ) & 0x0F );
}
SX1272Write( REG_PACONFIG, paConfig );
SX1272Write( REG_PADAC, paDac );
}
uint8_t SX1272GetPaSelect( uint32_t channel )
{
return RF_PACONFIG_PASELECT_RFO;
}
void SX1272SetAntSwLowPower( bool status )
{
//Ant Switch Controlled by SX1272 IC
}
void SX1272SetAntSw( uint8_t opMode )
{
switch( opMode )
{
case RFLR_OPMODE_TRANSMITTER:
SX1272.RxTx = 1;
break;
case RFLR_OPMODE_RECEIVER:
case RFLR_OPMODE_RECEIVER_SINGLE:
case RFLR_OPMODE_CAD:
default:
SX1272.RxTx = 0;
break;
}
}
bool SX1272CheckRfFrequency( uint32_t frequency )
{
// Implement check. Currently all frequencies are supported
return true;
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/