spd-lorabees/Src/stm32l0xx_hw.c

/*
 / _____)             _              | |
( (____  _____ ____ _| |_ _____  ____| |__
 \____ \| ___ |    (_   _) ___ |/ ___)  _ \
 _____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
    (C)2013 Semtech

Description: Target board general functions implementation

License: Revised BSD License, see LICENSE.TXT file include in the project

Maintainer: Miguel Luis and Gregory Cristian
*/
 /*******************************************************************************
  * @file    stm32l0xx_hw.c
  * @author  MCD Application Team
  * @version V1.1.2
  * @date    08-September-2017
  * @brief   system hardware driver
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
  * All rights reserved.</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted, provided that the following conditions are met:
  *
  * 1. Redistribution of source code must retain the above copyright notice,
  *    this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright notice,
  *    this list of conditions and the following disclaimer in the documentation
  *    and/or other materials provided with the distribution.
  * 3. Neither the name of STMicroelectronics nor the names of other
  *    contributors to this software may be used to endorse or promote products
  *    derived from this software without specific written permission.
  * 4. This software, including modifications and/or derivative works of this
  *    software, must execute solely and exclusively on microcontroller or
  *    microprocessor devices manufactured by or for STMicroelectronics.
  * 5. Redistribution and use of this software other than as permitted under
  *    this license is void and will automatically terminate your rights under
  *    this license.
  *
  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */
#include <hw_i2c.h>
#include "hw.h"
#include "radio.h"
#include "debug.h"
#include "vcom.h"

/*!
 *  \brief Unique Devices IDs register set ( STM32L0xxx )
 */
#define         ID1                                 ( 0x1FF80050 )
#define         ID2                                 ( 0x1FF80054 )
#define         ID3                                 ( 0x1FF80064 )

/*!
 * \brief ADC Vbat measurement constants
 */

 /* Internal voltage reference, parameter VREFINT_CAL*/
#define VREFINT_CAL       ((uint16_t*) ((uint32_t) 0x1FF80078))
#define LORAWAN_MAX_BAT   254


/* Internal temperature sensor: constants data used for indicative values in  */
/* this example. Refer to device datasheet for min/typ/max values.            */

/* Internal temperature sensor, parameter TS_CAL1: TS ADC raw data acquired at 
 *a temperature of 110 DegC (+-5 DegC), VDDA = 3.3 V (+-10 mV). */
#define TEMP30_CAL_ADDR   ((uint16_t*) ((uint32_t) 0x1FF8007A))

/* Internal temperature sensor, parameter TS_CAL2: TS ADC raw data acquired at 
 *a temperature of  30 DegC (+-5 DegC), VDDA = 3.3 V (+-10 mV). */
#define TEMP110_CAL_ADDR  ((uint16_t*) ((uint32_t) 0x1FF8007E))

/* Vdda value with which temperature sensor has been calibrated in production 
   (+-10 mV). */
#define VDDA_TEMP_CAL                  ((uint32_t) 3000)

/*!
 * Flag to indicate if the MCU is Initialized
 */
static bool McuInitialized = false;

/**
  * @brief This function initializes the hardware
  * @param None
  * @retval None
  */
void HW_Init( void )
{
  if( McuInitialized == false )
  {
#if defined( USE_BOOTLOADER )
    /* Set the Vector Table base location at 0x3000 */
    NVIC_SetVectorTable( NVIC_VectTab_FLASH, 0x3000 );
#endif

   // HW_AdcInit( );

    Radio.IoInit( );

    HW_SPI_Init( );

    HW_RTC_Init( );

    HW_I2C_Init();

    vcom_Init( );

    McuInitialized = true;
  }
}

/**
  * @brief This function Deinitializes the hardware
  * @param None
  * @retval None
  */
void HW_DeInit( void )
{
  HW_SPI_DeInit( );

  Radio.IoDeInit( );

  HW_I2C_DeInit();

  vcom_DeInit( );

  McuInitialized = false;
}

/**
  * @brief This function Initializes the hardware Ios
  * @param None
  * @retval None
  */
static void HW_IoInit( void )
{
  HW_SPI_IoInit( );
  HAL_I2C_MspInit(&hi2c1);

  Radio.IoInit( );

  vcom_IoInit( );
}

/**
  * @brief This function Deinitializes the hardware Ios
  * @param None
  * @retval None
  */
static void HW_IoDeInit( void )
{
  HW_SPI_IoDeInit( );
  HAL_I2C_MspDeInit(&hi2c1);

  Radio.IoDeInit( );

  vcom_IoDeInit( );
}


void HW_GpioInit(void)
{
  /* STM32L0 Gpios are all already configured in analog input at nReset*/
}

/**
  * @brief  System Clock Configuration
  *         The system Clock is configured as follow :
  *            System Clock source            = PLL (HSI)
  *            SYSCLK(Hz)                     = 32000000
  *            HCLK(Hz)                       = 32000000
  *            AHB Prescaler                  = 1
  *            APB1 Prescaler                 = 1
  *            APB2 Prescaler                 = 1
  *            HSI Frequency(Hz)              = 16000000
  *            PLLMUL                         = 6
  *            PLLDIV                         = 3
  *            Flash Latency(WS)              = 1
  * @retval None
  */

void SystemClock_Config( void )
{
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};

  /* Enable HSE Oscillator and Activate PLL with HSE as source */
  RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI;
  RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
  RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
  RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;
  RCC_OscInitStruct.PLL.PLLMUL          = RCC_PLLMUL_6;
  RCC_OscInitStruct.PLL.PLLDIV          = RCC_PLLDIV_3;

  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /* Set Voltage scale1 as MCU will run at 32MHz */
  __HAL_RCC_PWR_CLK_ENABLE();
  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

  /* Poll VOSF bit of in PWR_CSR. Wait until it is reset to 0 */
  while (__HAL_PWR_GET_FLAG(PWR_FLAG_VOS) != RESET) {};

  /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
  clocks dividers */
  RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
  {
    Error_Handler();
  }
}
/**
  * @brief This function return a random seed
  * @note based on the device unique ID
  * @param None
  * @retval see
  */
uint32_t HW_GetRandomSeed( void )
{
  return ( ( *( uint32_t* )ID1 ) ^ ( *( uint32_t* )ID2 ) ^ ( *( uint32_t* )ID3 ) );
}

/**
  * @brief This function return a unique ID
  * @param unique ID
  * @retval none
  */
void HW_GetUniqueId( uint8_t *id )
{
    id[7] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 24;
    id[6] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 16;
    id[5] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 8;
    id[4] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) );
    id[3] = ( ( *( uint32_t* )ID2 ) ) >> 24;
    id[2] = ( ( *( uint32_t* )ID2 ) ) >> 16;
    id[1] = ( ( *( uint32_t* )ID2 ) ) >> 8;
    id[0] = ( ( *( uint32_t* )ID2 ) );
}


/**
  * @brief Enters Low Power Stop Mode
  * @note ARM exists the function when waking up
  * @param none
  * @retval none
  */
void HW_EnterStopMode( void)
{
  BACKUP_PRIMASK();

  DISABLE_IRQ( );

  HW_IoDeInit( );

  /*clear wake up flag*/
  SET_BIT(PWR->CR, PWR_CR_CWUF);

  RESTORE_PRIMASK( );

  /* Enter Stop Mode */
  HAL_PWR_EnterSTOPMode ( PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI );
}
/**
  * @brief Exists Low Power Stop Mode
  * @note Enable the pll at 32MHz
  * @param none
  * @retval none
  */
void HW_ExitStopMode( void)
{
  /* Disable IRQ while the MCU is not running on HSI */

  BACKUP_PRIMASK();

  DISABLE_IRQ( );

  /* After wake-up from STOP reconfigure the system clock */
  /* Enable HSI */
  __HAL_RCC_HSI_ENABLE();

  /* Wait till HSI is ready */
  while( __HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET ) {}

  /* Enable PLL */
  __HAL_RCC_PLL_ENABLE();
  /* Wait till PLL is ready */
  while( __HAL_RCC_GET_FLAG( RCC_FLAG_PLLRDY ) == RESET ) {}

  /* Select PLL as system clock source */
  __HAL_RCC_SYSCLK_CONFIG ( RCC_SYSCLKSOURCE_PLLCLK );

  /* Wait till PLL is used as system clock source */
  while( __HAL_RCC_GET_SYSCLK_SOURCE( ) != RCC_SYSCLKSOURCE_STATUS_PLLCLK ) {}

  /*initilizes the peripherals*/
  HW_IoInit( );

  RESTORE_PRIMASK( );
}

/**
  * @brief Enters Low Power Sleep Mode
  * @note ARM exits the function when waking up
  * @param none
  * @retval none
  */
void HW_EnterSleepMode( void)
{
    HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
}

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/