B3M38SPD seminar project - beehive monitor with LoRa reporting
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
spd-lorabees/Src/debug.c

136 lines
4.7 KiB

7 years ago
/******************************************************************************
* @file debug.c
* @author MCD Application Team
* @version V1.1.2
* @date 08-September-2017
* @brief debug API
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
* All rights reserved.</center></h2>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted, provided that the following conditions are met:
*
* 1. Redistribution of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of other
* contributors to this software may be used to endorse or promote products
* derived from this software without specific written permission.
* 4. This software, including modifications and/or derivative works of this
* software, must execute solely and exclusively on microcontroller or
* microprocessor devices manufactured by or for STMicroelectronics.
* 5. Redistribution and use of this software other than as permitted under
* this license is void and will automatically terminate your rights under
* this license.
*
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "hw.h"
/**
* @brief Initializes the debug
* @param None
* @retval None
*/
void DBG_Init( void )
{
#ifdef DEBUG
GPIO_InitTypeDef gpioinitstruct = {0};
/* Enable the GPIO_B Clock */
__HAL_RCC_GPIOB_CLK_ENABLE();
/* Configure the GPIO pin */
gpioinitstruct.Mode = GPIO_MODE_OUTPUT_PP;
gpioinitstruct.Pull = GPIO_PULLUP;
gpioinitstruct.Speed = GPIO_SPEED_HIGH;
gpioinitstruct.Pin = (GPIO_PIN_12 | GPIO_PIN_13| GPIO_PIN_14 | GPIO_PIN_15);
HAL_GPIO_Init(GPIOB, &gpioinitstruct);
/* Reset debug Pins */
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_12, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_13, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_14, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_15, GPIO_PIN_RESET);
#if 0
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1);
#endif
__HAL_RCC_DBGMCU_CLK_ENABLE( );
HAL_DBGMCU_EnableDBGSleepMode( );
HAL_DBGMCU_EnableDBGStopMode( );
HAL_DBGMCU_EnableDBGStandbyMode( );
#else /* DEBUG */
/* sw interface off*/
GPIO_InitTypeDef GPIO_InitStructure ={0};
GPIO_InitStructure.Mode = GPIO_MODE_ANALOG;
GPIO_InitStructure.Pull = GPIO_NOPULL;
GPIO_InitStructure.Pin = (GPIO_PIN_13 | GPIO_PIN_14);
__GPIOA_CLK_ENABLE() ;
HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);
__GPIOA_CLK_DISABLE() ;
__HAL_RCC_DBGMCU_CLK_ENABLE( );
HAL_DBGMCU_DisableDBGSleepMode( );
HAL_DBGMCU_DisableDBGStopMode( );
HAL_DBGMCU_DisableDBGStandbyMode( );
__HAL_RCC_DBGMCU_CLK_DISABLE( );
#endif
}
#if 0
7 years ago
/**
* @brief Error_Handler
* @param None
* @retval None
*/
void Error_Handler(void)
{
DBG_PRINTF("Error_Handler\n\r");
while(1);
}
#endif
void _Error_Handler(char * file, int line)
{
/* USER CODE BEGIN Error_Handler_Debug */
PRINTF("INIT ERROR, %s:%d", file, (uint16_t) line);
/* USER CODE END Error_Handler_Debug */
}
void assert_failed(uint8_t* file, uint32_t line)
{
PRINTF("ASSERT FAILED, %s:%d", file, (uint16_t) line);
}
7 years ago
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/