f105-motor-demo_esp/sbmp-

SBMP library, v1.3

This is a reference implementation of SBMP, which should be usable in embedded environment.

The library cosists of a Framing layer, Datagram middleware and a Session layer.

How to use

The framing layer is isolated in the sbmp_frame module, and can be used on it's own, if sessions are not needed. That gives you reliable data transfer with error detection.

If you want to get the most out of SBMP, use the session layer. Session layer functions are namespaced sbmp_ep_ ("ep" stands for endpoint).

All header files are included in sbmp.h, which is the only file you should #include in your application.

Read comments in the examples to see how to use the library.

Configuration & porting

You can customize a lot of aspects of SBMP in sbmp_config.h.

If you included the library as a submodule, and want to avoid manual edits, you can set the options using compiler flags (eg. to disable CRC32: -DSBMP_HAS_CRC32=0).

What to change for Arduino

Basically disable all you can in the config file.

• You don't want malloc()
• Logging is useless if there's only one USART anyway
• CRC32 can be replaced with XOR if you don't care about reliability that much.

This gains you a huge size reduction, and the whole library will take only around 2.5 kB flash and 150 B ram (of course, not including your Rx buffer).

It works really well for ATmega328P - the usual Arduino chip.

Example for AVR

This example uses the AVR C boilerplate.

It's here just to show how to set up SBMP in your AVR application.

NOTE: This example uses static allocation of the struct and buffer.

If you pass NULLs to the init function, it will malloc() it for you and return a pointer to the Endpoint.

#include <avr/io.h>          // register definitions
#include <avr/interrupt.h>   // interrupt vectors

#include <stdint.h>
#include <stdbool.h>

// AVR C boilerplate libs
#include "lib/iopins.h"
#include "lib/usart.h"

// SBMP
#include "sbmp/sbmp.h"

// SBMP globals
#define RXBUF_LEN 128
static uint8_t rxbuf[RXBUF_LEN];
static SBMP_Endpoint ep;

/** USART receive handler */
ISR(USART_RX_vect)
{
  // Get the byte and pass it to SBMP
  uint8_t b = usart_rx();
  sbmp_ep_receive(&ep, b); // WARN: This can fail. Should check retval.
}

/** Message received from SBMP */
void message_received(SBMP_Datagram *dg)
{
  // ...
}

int main()
{
  usart_init(BAUD_115200);
  usart_isr_rx_enable(true); // enable the interrupt

  // init SBMP
  sbmp_ep_init(&ep, rxbuf, RXBUF_LEN, message_received, usart_tx);

  // ...additional SBMP configuration if needed...

  // enable rx, tx
  sbmp_ep_enable(&ep, true);

  // globally enable interrupts (for the USART_RX handler)
  sei();

  while (1) {
    // ... do stuff
  }
}