finalizations

main/Kconfig.projbuild

@@ -1,14 +1,14 @@
 menu "Project configuration"
 
     menu "Pin mapping"
-        config PIN_BUZZER
-            int "Buzzer pin"
-            default 16
-
         config PIN_LED
             int "LED pin"
             default 17
 
+        config PIN_STATUSLED
+            int "Status LED pin"
+            default 20
+
         config PIN_BLIND
             int "Blind open pin"
             default 18

main/actuators.c

@@ -16,46 +16,14 @@ struct actuators_status gAct = {
         .power = 0,
 };
 
-static void buzzer_init()
-{
-    ledc_timer_config_t ledc_timer = {
-            .duty_resolution = LEDC_TIMER_8_BIT, // resolution of PWM duty
-            .freq_hz = 4400,                      // frequency of PWM signal
-            .speed_mode = LEDC_HIGH_SPEED_MODE,           // timer mode
-            .timer_num = LEDC_TIMER_0,            // timer index
-            .clk_cfg = LEDC_AUTO_CLK,              // Auto select the source clock
-    };
-    // Set configuration of timer0 for high speed channels
-    ledc_timer_config(&ledc_timer);
-
-    ledc_channel_config_t chan = {
-            .channel    = LEDC_CHANNEL_0,
-            .duty       = 127,
-            .gpio_num   = CONFIG_PIN_BUZZER,
-            .speed_mode = LEDC_HIGH_SPEED_MODE,
-            .hpoint     = 0,
-            .timer_sel  = LEDC_TIMER_0
-    };
-    ledc_channel_config(&chan);
-}
-
-void act_buzzer_set(bool on)
-{
-    if (gAct.buzzer == on) {
-        return;
-    }
-    ESP_LOGI(TAG, "set buzzer %d", on);
-    gAct.buzzer = on;
-    if (on) {
-        ledc_set_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 127);
-        ledc_update_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0);
-    } else {
-        ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 0);
-    }
-}
+int sPinPwm = 0;
+int sPinDir = 0;
 
 static void motor_init()
 {
+    sPinPwm = (gSettings.swap_pwm_dir ? CONFIG_PIN_DIR : CONFIG_PIN_PWM);
+    sPinDir = (gSettings.swap_pwm_dir ? CONFIG_PIN_PWM : CONFIG_PIN_DIR);
+
     ledc_timer_config_t ledc_timer = {
             .duty_resolution = LEDC_TIMER_10_BIT, // resolution of PWM duty
             .freq_hz = 1000,                      // frequency of PWM signal
@@ -70,7 +38,7 @@ static void motor_init()
     ledc_channel_config_t chan = {
             .channel    = LEDC_CHANNEL_1,
             .duty       = 512,
-            .gpio_num   = CONFIG_PIN_PWM,
+            .gpio_num   = sPinPwm,
             .speed_mode = LEDC_HIGH_SPEED_MODE,
             .hpoint     = 0,
             .timer_sel  = LEDC_TIMER_1,
@@ -81,7 +49,7 @@ static void motor_init()
     // Direction output
     gpio_config_t ioconf = {
             .mode = GPIO_MODE_OUTPUT,
-            .pin_bit_mask = 1 << CONFIG_PIN_DIR,
+            .pin_bit_mask = 1 << sPinDir,
     };
     gpio_config(&ioconf);
 
@@ -123,7 +91,7 @@ void act_motor_direction_set(enum motor_direction dir)
     }
     ESP_LOGI(TAG, "set dir %d", dir);
     gAct.dir = dir;
-    gpio_set_level(CONFIG_PIN_DIR, (int) dir); // TODO verify polarity
+    gpio_set_level(sPinDir, (int) dir); // TODO verify polarity
 }
 
 static void blind_init()
@@ -150,7 +118,7 @@ static void led_init()
 {
     gpio_config_t ioconf = {
             .mode = GPIO_MODE_OUTPUT,
-            .pin_bit_mask = 1 << CONFIG_PIN_LED,
+            .pin_bit_mask = (1 << CONFIG_PIN_LED) | (1 << CONFIG_PIN_STATUSLED),
     };
     gpio_config(&ioconf);
 }
@@ -165,20 +133,24 @@ void act_led_set(bool on)
     gpio_set_level(CONFIG_PIN_LED, (int) on); // TODO verify polarity
 }
 
+void act_statusled_set(bool on)
+{
+    gpio_set_level(CONFIG_PIN_STATUSLED, (int) on);
+}
+
 void act_init()
 {
-    buzzer_init();
     motor_init();
     blind_init();
     led_init();
 }
 
-int16_t act_temp_in()
+int16_t act_temp1()
 {
     return gTempSensors[0];
 }
 
-int16_t act_temp_out()
+int16_t act_temp2()
 {
     return gTempSensors[1];
 }

main/actuators.h

@@ -17,20 +17,19 @@ struct actuators_status {
     enum motor_direction dir;
     bool blind;
     bool led;
-    bool buzzer;
     uint16_t power;
 };
 
 extern struct actuators_status gAct;
 
 void act_init();
-void act_buzzer_set(bool on);
 void act_motor_power_set(uint16_t perc);
 void act_motor_direction_set(enum motor_direction dir);
 void act_blind_set(bool open);
 void act_led_set(bool on);
+void act_statusled_set(bool on);
 
-int16_t act_temp_in();
-int16_t act_temp_out();
+int16_t act_temp1();
+int16_t act_temp2();
 
 #endif //FANCTL_ACTUATORS_H

main/fancontrol.c

@@ -35,9 +35,27 @@ void settings_blind_time_set(uint16_t blind_time)
 
 static void fanctltask(void *dummy) {
     TickType_t last_wake_time = xTaskGetTickCount();
+    bool statusled = 0;
     while (1) {
+        act_statusled_set(statusled);
+        statusled ^= 1;
+        //
         timerCallback();
         vTaskDelayUntil(&last_wake_time, pdMS_TO_TICKS(1000));
+
+        gState.uptime_secs += 1;
+        if (gState.uptime_secs >= 3600) {
+            gState.uptime_secs = 0;
+            gState.uptime_hours += 1;
+        }
+
+        if ((gState.effective_vent_mode & 6) != 0) {
+            gState.motor_secs += 1;
+            if (gState.motor_secs >= 3600) {
+                gState.motor_secs = 0;
+                gState.motor_hours += 1;
+            }
+        }
     }
 }
 
@@ -46,6 +64,7 @@ void fancontrol_init()
     gState.set_vent_mode = gSettings.initial_mode;
     gState.set_power = gSettings.initial_power;
 
+    // this doesnt work
 //    TimerHandle_t hTimer = xTimerCreate("fanctl",
 //                                        pdMS_TO_TICKS(1000),
 //                                        pdTRUE,
@@ -236,8 +255,8 @@ static void timerCallback()
     }
 
     // Measure temperatures
-    int16_t t1 = act_temp_in();
-    int16_t t2 = act_temp_out();
+    int16_t t1 = act_temp1();
+    int16_t t2 = act_temp2();
 
     gState.t_actual_in = t1;
     gState.t_actual_out = t2;

main/fancontrol.h

@@ -10,6 +10,7 @@
 
 void fancontrol_init();
 
+/** this is bit-based: IN:OUT:BLIND */
 enum ventilation_mode {
     VENT_MODE_OFF = 0,
     VENT_MODE_FREE = 1,
@@ -84,6 +85,13 @@ struct FanControlState {
     int32_t t1_aggr;
     int32_t t2_aggr;
     uint32_t t_aggr_cnt;
+
+    // helper counters that increment hour counters when overflow
+    uint16_t uptime_secs;
+    uint16_t motor_secs;
+
+    uint16_t uptime_hours;
+    uint16_t motor_hours;
 };
 
 extern struct FanControlState gState;

main/mbiface.c

@@ -9,39 +9,64 @@
 static const char * TAG = "mb";
 
 Tcpd_t g_mbifc_server = NULL;
-ModbusSlave_t gModbus;
+ModbusSlave_t gModbus = {};
+
+#define IDENT_MAGIC 3333
+#define REBOOT_MAGIC 0xB007 /* 45063 */
+#define INPUT_REG_MIRROR_IN_HOLDING_BASE_ADDR 1000
 
 enum HoldingRegisters {
+  H_IDENT = 0,
+  // Control
   H_MODE = 1,
-  H_POWER,
-  H_SUMMER,
-  H_INITIAL_MODE,
-  H_INITIAL_POWER,
-  H_RECUP_MODE,
-  H_RECUP_TIME,
-  H_RECUP_TIME_MIN,
-  H_RECUP_TIME_MAX,
-  H_RECUP_FACTOR,
-  H_RAMP_TIME,
-  H_BLIND_TIME,
-  H_MIN_POWER,
+  H_POWER = 2,
+  H_SUMMER_MODE = 3,
+
+  // Settings
+  H_INITIAL_MODE = 10,
+  H_INITIAL_POWER = 11,
+  H_RECUP_MODE = 12,
+  H_RECUP_TIME = 13,
+  H_RECUP_TIME_MIN = 14,
+  H_RECUP_TIME_MAX = 15,
+  H_RECUP_FACTOR = 16,
+  H_MIN_POWER = 17,
+
+  // Hardware settings (don't need to change once set correctly)
+  H_RAMP_TIME = 30,
+  H_BLIND_TIME = 31,
+  H_SWAP_TEMPS = 32,
+  H_SWAP_PWMDIR = 33,
+
+  H_REBOOT = 70,
 };
 
 enum InputRegisters {
-  I_RECUP_TIME_IN = 1,
-  I_RECUP_TIME_OUT,
-  I_T_VALIDITY,
-  I_T_IN_INST,
-  I_T_OUT_INST,
-  I_T_INDOOR,
-  I_T_OUTDOOR,
-  I_T_INFLOW,
-  I_T_EXHAUST,
-  I_MODE_INST,
-  I_MOTOR_RAMP,
-  I_BLIND_RAMP,
+  I_T_VALIDITY = 1,
+  I_T_IN_INST = 2,
+  I_T_OUT_INST = 3,
+  I_T_INDOOR = 4,
+  I_T_OUTDOOR = 5,
+  I_T_INFLOW = 6,
+  I_T_EXHAUST = 7,
+  I_RECUP_TIME_IN = 8,
+  I_RECUP_TIME_OUT = 9,
+
+  I_MODE_INST = 20,
+  I_MOTOR_RAMP = 21,
+  I_BLIND_RAMP = 22,
+  I_MOTOR_SECS = 23,
+  I_MOTOR_HOURS = 24,
+  I_UPTIME_SECS = 25,
+  I_UPTIME_HOURS = 26,
+  I_FREE_HEAP_KB = 27,
 };
 
+static void restartLater() {
+    vTaskDelay(pdMS_TO_TICKS(100));
+    esp_restart();
+}
+
 /**
  * Socket read handler
  */
@@ -74,7 +99,8 @@ void endOfAccess(ModbusSlave_t *ms) {
 
 ModbusException_t ri(ModbusSlave_t *pSlave, uint16_t ref, uint16_t *pValue) {
     ESP_LOGD(TAG, "Read input %d", ref);
-    uint16_t scratch = 0;
+    uint16_t scratch16 = 0;
+    uint32_t scratch32 = 0;
 
     switch (ref) {
         case I_RECUP_TIME_IN:
@@ -84,13 +110,13 @@ ModbusException_t ri(ModbusSlave_t *pSlave, uint16_t ref, uint16_t *pValue) {
             *pValue = gState.real_recup_time_out;
             break;
         case I_T_VALIDITY:
-            scratch |= (int)gState.valid_t_actual_in;
-            scratch |= (int)gState.valid_t_actual_out << 1;
-            scratch |= (int)gState.valid_t_indoor << 2;
-            scratch |= (int)gState.valid_t_outdoor << 3;
-            scratch |= (int)gState.valid_t_inflow << 4;
-            scratch |= (int)gState.valid_t_exhaust << 5;
-            *pValue = scratch;
+            scratch16 |= (int)gState.valid_t_actual_in;
+            scratch16 |= (int)gState.valid_t_actual_out << 1;
+            scratch16 |= (int)gState.valid_t_indoor << 2;
+            scratch16 |= (int)gState.valid_t_outdoor << 3;
+            scratch16 |= (int)gState.valid_t_inflow << 4;
+            scratch16 |= (int)gState.valid_t_exhaust << 5;
+            *pValue = scratch16;
             break;
         case I_T_IN_INST:
             *pValue = gState.t_actual_in;
@@ -119,6 +145,25 @@ ModbusException_t ri(ModbusSlave_t *pSlave, uint16_t ref, uint16_t *pValue) {
         case I_BLIND_RAMP:
             *pValue = gState.blind_position;
             break;
+        case I_UPTIME_SECS:
+            *pValue = gState.uptime_secs;
+            break;
+        case I_UPTIME_HOURS:
+            *pValue = gState.uptime_hours;
+            break;
+        case I_MOTOR_SECS:
+            *pValue = gState.motor_secs;
+            break;
+        case I_MOTOR_HOURS:
+            *pValue = gState.motor_hours;
+            break;
+        case I_FREE_HEAP_KB:
+            scratch32 = esp_get_free_heap_size() / 1024;
+            if (scratch32 > UINT16_MAX) {
+                scratch32 = UINT16_MAX;
+            }
+            *pValue = scratch32;
+            break;
 
         default:
             return MB_EXCEPTION_ILLEGAL_DATA_ADDRESS;
@@ -131,13 +176,16 @@ ModbusException_t rh(ModbusSlave_t *pSlave, uint16_t ref, uint16_t *pValue) {
     ESP_LOGD(TAG, "Read holding %d", ref);
 
     switch (ref) {
+        case H_IDENT:
+            *pValue = IDENT_MAGIC;
+            break;
         case H_MODE:
             *pValue = (int) gState.set_vent_mode;
             break;
         case H_POWER:
             *pValue = gState.set_power;
             break;
-        case H_SUMMER:
+        case H_SUMMER_MODE:
             *pValue = (int) gSettings.summer_mode;
             break;
         case H_INITIAL_MODE:
@@ -170,10 +218,16 @@ ModbusException_t rh(ModbusSlave_t *pSlave, uint16_t ref, uint16_t *pValue) {
         case H_MIN_POWER:
             *pValue = gSettings.min_power;
             break;
+        case H_SWAP_TEMPS:
+            *pValue = gSettings.swap_temps;
+            break;
+        case H_SWAP_PWMDIR:
+            *pValue = gSettings.swap_pwm_dir;
+            break;
         default:
             // inputs are mapped to the holding address space
-            if (ref >= 100) {
-                return ri(pSlave, ref - 100, pValue);
+            if (ref >= INPUT_REG_MIRROR_IN_HOLDING_BASE_ADDR) {
+                return ri(pSlave, ref - INPUT_REG_MIRROR_IN_HOLDING_BASE_ADDR, pValue);
             }
 
             return MB_EXCEPTION_ILLEGAL_DATA_ADDRESS;
@@ -211,7 +265,7 @@ ModbusException_t wh(ModbusSlave_t *pSlave, uint16_t ref, uint16_t value) {
             }
             fan_set_power(value);
             break;
-        case H_SUMMER:
+        case H_SUMMER_MODE:
             gSettings.summer_mode = (value != 0);
             settings_persist(SETTINGS_summer_mode);
             break;
@@ -279,6 +333,21 @@ ModbusException_t wh(ModbusSlave_t *pSlave, uint16_t ref, uint16_t value) {
             gSettings.min_power = value;
             settings_persist(SETTINGS_min_power);
             break;
+        case H_SWAP_TEMPS:
+            gSettings.swap_temps = value;
+            settings_persist(SETTINGS_swap_temps);
+            break;
+        case H_SWAP_PWMDIR:
+            gSettings.swap_temps = value;
+            settings_persist(SETTINGS_swap_pwm_dir);
+            break;
+        case H_REBOOT:
+            if (value == REBOOT_MAGIC) {
+                // if we restart immediately, the modbus req won't finish and master then sends retries
+                //  and restarts us again and again
+                xTaskCreate(restartLater, "kill", 2048, NULL, PRIO_HIGH, NULL);
+            }
+            break;
         default:
             return MB_EXCEPTION_ILLEGAL_DATA_ADDRESS;
     }

main/onewires.c

@@ -6,6 +6,7 @@
 #include "tasks.h"
 #include "owb.h"
 #include "ds18b20.h"
+#include "settings.h"
 
 static const char* TAG="1w";
 
@@ -54,17 +55,21 @@ int read_onewires(int16_t *a, int16_t *b)
     DS18B20_ERROR errors[2] = { 0 };
 
     ds18b20_wait_for_conversion(sDevs[0]);
-    vTaskDelay(pdMS_TO_TICKS(10)); // to be sure its done
+    vTaskDelay(pdMS_TO_TICKS(15)); // to be sure it's done
 
     for (int i = 0; i < 2; i++) {
         errors[i] = ds18b20_read_temp(sDevs[i], &readings[i]);
     }
 
-    if (errors[0] != DS18B20_OK || errors[1] != DS18B20_OK) {
-        return -1;
-    }
+    int16_t val1 = (int16_t) roundf(readings[0] * 10);
+    int16_t val2 = (int16_t) roundf(readings[1] * 10);
 
-    *a = (int16_t) roundf(readings[0] * 10);
-    *b = (int16_t) roundf(readings[1] * 10);
-    return 0;
+    if (gSettings.swap_temps) {
+        *a = val2;
+        *b = val1;
+    } else {
+        *a = val1;
+        *b = val2;
+    }
+    return (errors[0] == DS18B20_OK) && (errors[1] != DS18B20_OK);
 }

main/settings.h

@@ -49,7 +49,9 @@ extern nvs_handle g_nvs_storage;
     X(uint16_t      , initial_mode   ,          , 0          , true  , u16  , &) /* rezim po zapnuti napajeni */ \
     X(uint16_t      , initial_power  ,          , 50         , true  , u16  , &) /* vychozi vykon */ \
     X(uint16_t      , min_power      ,          , 5          , true  , u16  , &) /* min power % */ \
-    X(bool          , summer_mode    ,          , 0          , true  , bool  , &) /* rezim po zapnuti napajeni */
+    X(bool          , summer_mode    ,          , 0          , true  , bool  , &) /* rezim po zapnuti napajeni */ \
+    X(bool          , swap_temps     ,          , 0          , true  , bool  , &) /* swap t0/t1 */ \
+    X(bool          , swap_pwm_dir   ,          , 0          , true  , bool  , &) /* swap pwm/dir signal */
 
 enum settings_key_enum {
 #undef X

main/user_main.c

@@ -33,6 +33,11 @@ void app_main(void) {
     settings_init();
     settings_load();
 
+    // do it ASAP so the fan maybe doesn't have time to start
+    onewires_setup();
+    act_init();
+    fancontrol_init();
+
     // Start IDF service for pin change interrupts
     ESP_ERROR_CHECK(gpio_install_isr_service(0));
 
@@ -58,10 +63,7 @@ void app_main(void) {
     console_setup_uart_stdio();
     ESP_ERROR_CHECK(console_start_stdio(NULL, NULL));
 
-    onewires_setup();
-    act_init();
     mbiface_setup();
-    fancontrol_init();
 
     telnetsrv_start(CONSOLE_TELNET_PORT);
     ESP_LOGI(TAG, "Startup finished, free heap = %u, cmds %"PRIu32, esp_get_free_heap_size(), console_count_commands());

sdkconfig

@@ -139,13 +139,13 @@ CONFIG_PARTITION_TABLE_MD5=y
 #
 # Pin mapping
 #
-CONFIG_PIN_BUZZER=16
-CONFIG_PIN_LED=17
+CONFIG_PIN_LED=16
+CONFIG_PIN_STATUSLED=13
 CONFIG_PIN_BLIND=18
-CONFIG_PIN_PWM=19
-CONFIG_PIN_DIR=23
-CONFIG_PIN_1WIRE_1=21
-CONFIG_PIN_1WIRE_2=22
+CONFIG_PIN_PWM=21
+CONFIG_PIN_DIR=22
+CONFIG_PIN_1WIRE_1=25
+CONFIG_PIN_1WIRE_2=26
 # end of Pin mapping
 
 #

sdkconfig.old

@@ -139,13 +139,13 @@ CONFIG_PARTITION_TABLE_MD5=y
 #
 # Pin mapping
 #
-CONFIG_PIN_BUZZER=16
-CONFIG_PIN_LED=17
+CONFIG_PIN_LED=16
+CONFIG_PIN_STATUSLED=13
 CONFIG_PIN_BLIND=18
-CONFIG_PIN_PWM=19
-CONFIG_PIN_DIR=20
-CONFIG_PIN_1WIRE_1=21
-CONFIG_PIN_1WIRE_2=22
+CONFIG_PIN_PWM=21
+CONFIG_PIN_DIR=22
+CONFIG_PIN_1WIRE_1=25
+CONFIG_PIN_1WIRE_2=14
 # end of Pin mapping
 
 #
@@ -1264,164 +1264,3 @@ CONFIG_DHCPWD_TASK_PRIORITY=3
 #
 # CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set
 # end of Compatibility options
-
-# Deprecated options for backward compatibility
-CONFIG_TOOLPREFIX="xtensa-esp32-elf-"
-# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
-CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
-# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
-CONFIG_LOG_BOOTLOADER_LEVEL=3
-# CONFIG_APP_ROLLBACK_ENABLE is not set
-# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
-# CONFIG_FLASHMODE_QIO is not set
-# CONFIG_FLASHMODE_QOUT is not set
-CONFIG_FLASHMODE_DIO=y
-# CONFIG_FLASHMODE_DOUT is not set
-# CONFIG_MONITOR_BAUD_9600B is not set
-# CONFIG_MONITOR_BAUD_57600B is not set
-CONFIG_MONITOR_BAUD_115200B=y
-# CONFIG_MONITOR_BAUD_230400B is not set
-# CONFIG_MONITOR_BAUD_921600B is not set
-# CONFIG_MONITOR_BAUD_2MB is not set
-# CONFIG_MONITOR_BAUD_OTHER is not set
-CONFIG_MONITOR_BAUD_OTHER_VAL=115200
-CONFIG_MONITOR_BAUD=115200
-# CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG is not set
-# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
-CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
-# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
-# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
-CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
-# CONFIG_CXX_EXCEPTIONS is not set
-CONFIG_STACK_CHECK_NONE=y
-# CONFIG_STACK_CHECK_NORM is not set
-# CONFIG_STACK_CHECK_STRONG is not set
-# CONFIG_STACK_CHECK_ALL is not set
-# CONFIG_WARN_WRITE_STRINGS is not set
-# CONFIG_DISABLE_GCC8_WARNINGS is not set
-# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
-CONFIG_ESP32_APPTRACE_DEST_NONE=y
-CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
-CONFIG_ADC2_DISABLE_DAC=y
-# CONFIG_SPIRAM_SUPPORT is not set
-CONFIG_TRACEMEM_RESERVE_DRAM=0x0
-# CONFIG_ULP_COPROC_ENABLED is not set
-CONFIG_ULP_COPROC_RESERVE_MEM=0
-CONFIG_BROWNOUT_DET=y
-CONFIG_BROWNOUT_DET_LVL_SEL_0=y
-# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
-CONFIG_BROWNOUT_DET_LVL=0
-CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
-# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set
-# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set
-# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set
-# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
-# CONFIG_NO_BLOBS is not set
-# CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
-# CONFIG_EVENT_LOOP_PROFILING is not set
-CONFIG_POST_EVENTS_FROM_ISR=y
-CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
-# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set
-CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
-CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
-CONFIG_ESP_SYSTEM_PD_FLASH=y
-# CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND is not set
-CONFIG_IPC_TASK_STACK_SIZE=1024
-CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
-# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
-CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
-CONFIG_ESP32_PHY_MAX_TX_POWER=20
-CONFIG_ESP32_REDUCE_PHY_TX_POWER=y
-# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
-CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y
-# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
-# CONFIG_ESP32S2_PANIC_GDBSTUB is not set
-CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
-CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
-CONFIG_MAIN_TASK_STACK_SIZE=3584
-CONFIG_CONSOLE_UART_DEFAULT=y
-# CONFIG_CONSOLE_UART_CUSTOM is not set
-# CONFIG_ESP_CONSOLE_UART_NONE is not set
-CONFIG_CONSOLE_UART=y
-CONFIG_CONSOLE_UART_NUM=0
-CONFIG_CONSOLE_UART_BAUDRATE=115200
-CONFIG_INT_WDT=y
-CONFIG_INT_WDT_TIMEOUT_MS=300
-CONFIG_INT_WDT_CHECK_CPU1=y
-CONFIG_TASK_WDT=y
-# CONFIG_TASK_WDT_PANIC is not set
-CONFIG_TASK_WDT_TIMEOUT_S=5
-CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
-# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set
-CONFIG_TIMER_TASK_STACK_SIZE=3584
-# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
-# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
-CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
-CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
-CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
-CONFIG_MB_QUEUE_LENGTH=20
-CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
-CONFIG_MB_SERIAL_BUF_SIZE=256
-CONFIG_MB_SERIAL_TASK_PRIO=10
-CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y
-CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233
-CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
-CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
-CONFIG_MB_CONTROLLER_STACK_SIZE=4096
-CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
-CONFIG_MB_TIMER_PORT_ENABLED=y
-CONFIG_MB_TIMER_GROUP=0
-CONFIG_MB_TIMER_INDEX=0
-# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
-CONFIG_TIMER_TASK_PRIORITY=1
-CONFIG_TIMER_TASK_STACK_DEPTH=2048
-CONFIG_TIMER_QUEUE_LENGTH=10
-# CONFIG_L2_TO_L3_COPY is not set
-# CONFIG_USE_ONLY_LWIP_SELECT is not set
-CONFIG_ESP_GRATUITOUS_ARP=y
-CONFIG_GARP_TMR_INTERVAL=60
-CONFIG_TCPIP_RECVMBOX_SIZE=32
-CONFIG_TCP_MAXRTX=12
-CONFIG_TCP_SYNMAXRTX=12
-CONFIG_TCP_MSS=1440
-CONFIG_TCP_MSL=60000
-CONFIG_TCP_SND_BUF_DEFAULT=5744
-CONFIG_TCP_WND_DEFAULT=5744
-CONFIG_TCP_RECVMBOX_SIZE=6
-CONFIG_TCP_QUEUE_OOSEQ=y
-# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
-CONFIG_TCP_OVERSIZE_MSS=y
-# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
-# CONFIG_TCP_OVERSIZE_DISABLE is not set
-CONFIG_UDP_RECVMBOX_SIZE=6
-CONFIG_TCPIP_TASK_STACK_SIZE=3072
-CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
-# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
-# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
-CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
-# CONFIG_PPP_SUPPORT is not set
-CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
-CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
-CONFIG_ESP32_PTHREAD_STACK_MIN=768
-CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
-CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
-CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
-CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
-# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
-# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
-CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
-CONFIG_SUPPORT_TERMIOS=y
-CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-# End of deprecated options