bme now working

modbus
Ondřej Hruška 2 years ago
parent c2e87940f2
commit bf282b0a12
  1. 7
      components/bme680/CMakeLists.txt
  2. 225
      components/bme680/include/bme680.h
  3. 512
      components/bme680/include/bme680_defs.h
  4. 1138
      components/bme680/src/bme680.c
  5. 3
      main/CMakeLists.txt
  6. 10
      main/Kconfig.projbuild
  7. 7
      main/app_main.c
  8. 61
      main/i2c_utils.c
  9. 15
      main/i2c_utils.h
  10. 33
      main/periph_init.c
  11. 14
      main/periph_init.h
  12. 268
      main/voc_sensor.c
  13. 18
      main/voc_sensor.h
  14. 9
      sdkconfig

@ -0,0 +1,7 @@
set(COMPONENT_ADD_INCLUDEDIRS
"include")
set(COMPONENT_SRCDIRS
"src")
register_component()

@ -0,0 +1,225 @@
/**
* Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of the copyright holder nor the names of the
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
* OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
*
* The information provided is believed to be accurate and reliable.
* The copyright holder assumes no responsibility
* for the consequences of use
* of such information nor for any infringement of patents or
* other rights of third parties which may result from its use.
* No license is granted by implication or otherwise under any patent or
* patent rights of the copyright holder.
*
* @file bme680.h
* @date 30 Oct 2017
* @version 3.5.3
* @brief
*
*/
/*! @file bme680.h
@brief Sensor driver for BME680 sensor */
/*!
* @defgroup BME680 SENSOR API
* @{*/
#ifndef BME680_H_
#define BME680_H_
/*! CPP guard */
#ifdef __cplusplus
extern "C"
{
#endif
/* Header includes */
#include "bme680_defs.h"
/* function prototype declarations */
/*!
* @brief This API is the entry point.
* It reads the chip-id and calibration data from the sensor.
*
* @param[in,out] dev : Structure instance of bme680_dev
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_init(struct bme680_dev *dev);
/*!
* @brief This API writes the given data to the register address
* of the sensor.
*
* @param[in] reg_addr : Register address from where the data to be written.
* @param[in] reg_data : Pointer to data buffer which is to be written
* in the sensor.
* @param[in] len : No of bytes of data to write..
* @param[in] dev : Structure instance of bme680_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_set_regs(const uint8_t *reg_addr, const uint8_t *reg_data, uint8_t len, struct bme680_dev *dev);
/*!
* @brief This API reads the data from the given register address of the sensor.
*
* @param[in] reg_addr : Register address from where the data to be read
* @param[out] reg_data : Pointer to data buffer to store the read data.
* @param[in] len : No of bytes of data to be read.
* @param[in] dev : Structure instance of bme680_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_get_regs(uint8_t reg_addr, uint8_t *reg_data, uint16_t len, struct bme680_dev *dev);
/*!
* @brief This API performs the soft reset of the sensor.
*
* @param[in] dev : Structure instance of bme680_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
*/
int8_t bme680_soft_reset(struct bme680_dev *dev);
/*!
* @brief This API is used to set the power mode of the sensor.
*
* @param[in] dev : Structure instance of bme680_dev
* @note : Pass the value to bme680_dev.power_mode structure variable.
*
* value | mode
* -------------|------------------
* 0x00 | BME680_SLEEP_MODE
* 0x01 | BME680_FORCED_MODE
*
* * @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_set_sensor_mode(struct bme680_dev *dev);
/*!
* @brief This API is used to get the power mode of the sensor.
*
* @param[in] dev : Structure instance of bme680_dev
* @note : bme680_dev.power_mode structure variable hold the power mode.
*
* value | mode
* ---------|------------------
* 0x00 | BME680_SLEEP_MODE
* 0x01 | BME680_FORCED_MODE
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_get_sensor_mode(struct bme680_dev *dev);
/*!
* @brief This API is used to set the profile duration of the sensor.
*
* @param[in] dev : Structure instance of bme680_dev.
* @param[in] duration : Duration of the measurement in ms.
*
* @return Nothing
*/
void bme680_set_profile_dur(uint16_t duration, struct bme680_dev *dev);
/*!
* @brief This API is used to get the profile duration of the sensor.
*
* @param[in] dev : Structure instance of bme680_dev.
* @param[in] duration : Duration of the measurement in ms.
*
* @return Nothing
*/
void bme680_get_profile_dur(uint16_t *duration, const struct bme680_dev *dev);
/*!
* @brief This API reads the pressure, temperature and humidity and gas data
* from the sensor, compensates the data and store it in the bme680_data
* structure instance passed by the user.
*
* @param[out] data: Structure instance to hold the data.
* @param[in] dev : Structure instance of bme680_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_get_sensor_data(struct bme680_field_data *data, struct bme680_dev *dev);
/*!
* @brief This API is used to set the oversampling, filter and T,P,H, gas selection
* settings in the sensor.
*
* @param[in] dev : Structure instance of bme680_dev.
* @param[in] desired_settings : Variable used to select the settings which
* are to be set in the sensor.
*
* Macros | Functionality
*---------------------------------|----------------------------------------------
* BME680_OST_SEL | To set temperature oversampling.
* BME680_OSP_SEL | To set pressure oversampling.
* BME680_OSH_SEL | To set humidity oversampling.
* BME680_GAS_MEAS_SEL | To set gas measurement setting.
* BME680_FILTER_SEL | To set filter setting.
* BME680_HCNTRL_SEL | To set humidity control setting.
* BME680_RUN_GAS_SEL | To set run gas setting.
* BME680_NBCONV_SEL | To set NB conversion setting.
* BME680_GAS_SENSOR_SEL | To set all gas sensor related settings
*
* @note : Below are the macros to be used by the user for selecting the
* desired settings. User can do OR operation of these macros for configuring
* multiple settings.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
*/
int8_t bme680_set_sensor_settings(uint16_t desired_settings, struct bme680_dev *dev);
/*!
* @brief This API is used to get the oversampling, filter and T,P,H, gas selection
* settings in the sensor.
*
* @param[in] dev : Structure instance of bme680_dev.
* @param[in] desired_settings : Variable used to select the settings which
* are to be get from the sensor.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
*/
int8_t bme680_get_sensor_settings(uint16_t desired_settings, struct bme680_dev *dev);
#ifdef __cplusplus
}
#endif /* End of CPP guard */
#endif /* BME680_H_ */
/** @}*/

@ -0,0 +1,512 @@
/**
* Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of the copyright holder nor the names of the
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
* OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
*
* The information provided is believed to be accurate and reliable.
* The copyright holder assumes no responsibility
* for the consequences of use
* of such information nor for any infringement of patents or
* other rights of third parties which may result from its use.
* No license is granted by implication or otherwise under any patent or
* patent rights of the copyright holder.
*
* @file bme680_defs.h
* @date 30 Oct 2017
* @version 3.5.3
* @brief
*
*/
/*! @file bme680_defs.h
@brief Sensor driver for BME680 sensor */
/*!
* @defgroup BME680 SENSOR API
* @brief
* @{*/
#ifndef BME680_DEFS_H_
#define BME680_DEFS_H_
/********************************************************/
/* header includes */
#ifdef __KERNEL__
#include <linux/types.h>
#include <linux/kernel.h>
#else
#include <stdint.h>
#include <stddef.h>
#endif
/******************************************************************************/
/*! @name Common macros */
/******************************************************************************/
#if !defined(UINT8_C) && !defined(INT8_C)
#define INT8_C(x) S8_C(x)
#define UINT8_C(x) U8_C(x)
#endif
#if !defined(UINT16_C) && !defined(INT16_C)
#define INT16_C(x) S16_C(x)
#define UINT16_C(x) U16_C(x)
#endif
#if !defined(INT32_C) && !defined(UINT32_C)
#define INT32_C(x) S32_C(x)
#define UINT32_C(x) U32_C(x)
#endif
#if !defined(INT64_C) && !defined(UINT64_C)
#define INT64_C(x) S64_C(x)
#define UINT64_C(x) U64_C(x)
#endif
/**@}*/
/**\name C standard macros */
#ifndef NULL
#ifdef __cplusplus
#define NULL 0
#else
#define NULL ((void *) 0)
#endif
#endif
/** BME680 General config */
#define BME680_POLL_PERIOD_MS UINT8_C(10)
/** BME680 I2C addresses */
#define BME680_I2C_ADDR_PRIMARY UINT8_C(0x76)
#define BME680_I2C_ADDR_SECONDARY UINT8_C(0x77)
/** BME680 unique chip identifier */
#define BME680_CHIP_ID UINT8_C(0x61)
/** BME680 coefficients related defines */
#define BME680_COEFF_SIZE UINT8_C(0x41)
#define BME680_COEFF_ADDR1_LEN UINT8_C(25)
#define BME680_COEFF_ADDR2_LEN UINT8_C(16)
/** BME680 field_x related defines */
#define BME680_FIELD_LENGTH UINT8_C(15)
#define BME680_FIELD_ADDR_OFFSET UINT8_C(17)
/** Soft reset command */
#define BME680_SOFT_RESET_CMD UINT8_C(0xb6)
/** Error code definitions */
#define BME680_OK INT8_C(0)
/* Errors */
#define BME680_E_NULL_PTR INT8_C(-1)
#define BME680_E_COM_FAIL INT8_C(-2)
#define BME680_E_DEV_NOT_FOUND INT8_C(-3)
#define BME680_E_INVALID_LENGTH INT8_C(-4)
/* Warnings */
#define BME680_W_DEFINE_PWR_MODE INT8_C(1)
#define BME680_W_NO_NEW_DATA INT8_C(2)
/* Info's */
#define BME680_I_MIN_CORRECTION UINT8_C(1)
#define BME680_I_MAX_CORRECTION UINT8_C(2)
/** Register map */
/** Other coefficient's address */
#define BME680_ADDR_RES_HEAT_VAL_ADDR UINT8_C(0x00)
#define BME680_ADDR_RES_HEAT_RANGE_ADDR UINT8_C(0x02)
#define BME680_ADDR_RANGE_SW_ERR_ADDR UINT8_C(0x04)
#define BME680_ADDR_SENS_CONF_START UINT8_C(0x5A)
#define BME680_ADDR_GAS_CONF_START UINT8_C(0x64)
/** Field settings */
#define BME680_FIELD0_ADDR UINT8_C(0x1d)
/** Heater settings */
#define BME680_RES_HEAT0_ADDR UINT8_C(0x5a)
#define BME680_GAS_WAIT0_ADDR UINT8_C(0x64)
/** Sensor configuration registers */
#define BME680_CONF_HEAT_CTRL_ADDR UINT8_C(0x70)
#define BME680_CONF_ODR_RUN_GAS_NBC_ADDR UINT8_C(0x71)
#define BME680_CONF_OS_H_ADDR UINT8_C(0x72)
#define BME680_MEM_PAGE_ADDR UINT8_C(0xf3)
#define BME680_CONF_T_P_MODE_ADDR UINT8_C(0x74)
#define BME680_CONF_ODR_FILT_ADDR UINT8_C(0x75)
/** Coefficient's address */
#define BME680_COEFF_ADDR1 UINT8_C(0x89)
#define BME680_COEFF_ADDR2 UINT8_C(0xe1)
/** Chip identifier */
#define BME680_CHIP_ID_ADDR UINT8_C(0xd0)
/** Soft reset register */
#define BME680_SOFT_RESET_ADDR UINT8_C(0xe0)
/** Heater control settings */
#define BME680_ENABLE_HEATER UINT8_C(0x00)
#define BME680_DISABLE_HEATER UINT8_C(0x08)
/** Gas measurement settings */
#define BME680_DISABLE_GAS_MEAS UINT8_C(0x00)
#define BME680_ENABLE_GAS_MEAS UINT8_C(0x01)
/** Over-sampling settings */
#define BME680_OS_NONE UINT8_C(0)
#define BME680_OS_1X UINT8_C(1)
#define BME680_OS_2X UINT8_C(2)
#define BME680_OS_4X UINT8_C(3)
#define BME680_OS_8X UINT8_C(4)
#define BME680_OS_16X UINT8_C(5)
/** IIR filter settings */
#define BME680_FILTER_SIZE_0 UINT8_C(0)
#define BME680_FILTER_SIZE_1 UINT8_C(1)
#define BME680_FILTER_SIZE_3 UINT8_C(2)
#define BME680_FILTER_SIZE_7 UINT8_C(3)
#define BME680_FILTER_SIZE_15 UINT8_C(4)
#define BME680_FILTER_SIZE_31 UINT8_C(5)
#define BME680_FILTER_SIZE_63 UINT8_C(6)
#define BME680_FILTER_SIZE_127 UINT8_C(7)
/** Power mode settings */
#define BME680_SLEEP_MODE UINT8_C(0)
#define BME680_FORCED_MODE UINT8_C(1)
/** Delay related macro declaration */
#define BME680_RESET_PERIOD UINT32_C(10)
/** SPI memory page settings */
#define BME680_MEM_PAGE0 UINT8_C(0x10)
#define BME680_MEM_PAGE1 UINT8_C(0x00)
/** Ambient humidity shift value for compensation */
#define BME680_HUM_REG_SHIFT_VAL UINT8_C(4)
/** Run gas enable and disable settings */
#define BME680_RUN_GAS_DISABLE UINT8_C(0)
#define BME680_RUN_GAS_ENABLE UINT8_C(1)
/** Buffer length macro declaration */
#define BME680_TMP_BUFFER_LENGTH UINT8_C(40)
#define BME680_REG_BUFFER_LENGTH UINT8_C(6)
#define BME680_FIELD_DATA_LENGTH UINT8_C(3)
#define BME680_GAS_REG_BUF_LENGTH UINT8_C(20)
#define BME680_GAS_HEATER_PROF_LEN_MAX UINT8_C(10)
/** Settings selector */
#define BME680_OST_SEL UINT16_C(1)
#define BME680_OSP_SEL UINT16_C(2)
#define BME680_OSH_SEL UINT16_C(4)
#define BME680_GAS_MEAS_SEL UINT16_C(8)
#define BME680_FILTER_SEL UINT16_C(16)
#define BME680_HCNTRL_SEL UINT16_C(32)
#define BME680_RUN_GAS_SEL UINT16_C(64)
#define BME680_NBCONV_SEL UINT16_C(128)
#define BME680_GAS_SENSOR_SEL (BME680_GAS_MEAS_SEL | BME680_RUN_GAS_SEL | BME680_NBCONV_SEL)
/** Number of conversion settings*/
#define BME680_NBCONV_MIN UINT8_C(0)
#define BME680_NBCONV_MAX UINT8_C(10)
/** Mask definitions */
#define BME680_GAS_MEAS_MSK UINT8_C(0x30)
#define BME680_NBCONV_MSK UINT8_C(0X0F)
#define BME680_FILTER_MSK UINT8_C(0X1C)
#define BME680_OST_MSK UINT8_C(0XE0)
#define BME680_OSP_MSK UINT8_C(0X1C)
#define BME680_OSH_MSK UINT8_C(0X07)
#define BME680_HCTRL_MSK UINT8_C(0x08)
#define BME680_RUN_GAS_MSK UINT8_C(0x10)
#define BME680_MODE_MSK UINT8_C(0x03)
#define BME680_RHRANGE_MSK UINT8_C(0x30)
#define BME680_RSERROR_MSK UINT8_C(0xf0)
#define BME680_NEW_DATA_MSK UINT8_C(0x80)
#define BME680_GAS_INDEX_MSK UINT8_C(0x0f)
#define BME680_GAS_RANGE_MSK UINT8_C(0x0f)
#define BME680_GASM_VALID_MSK UINT8_C(0x20)
#define BME680_HEAT_STAB_MSK UINT8_C(0x10)
#define BME680_MEM_PAGE_MSK UINT8_C(0x10)
#define BME680_SPI_RD_MSK UINT8_C(0x80)
#define BME680_SPI_WR_MSK UINT8_C(0x7f)
#define BME680_BIT_H1_DATA_MSK UINT8_C(0x0F)
/** Bit position definitions for sensor settings */
#define BME680_GAS_MEAS_POS UINT8_C(4)
#define BME680_FILTER_POS UINT8_C(2)
#define BME680_OST_POS UINT8_C(5)
#define BME680_OSP_POS UINT8_C(2)
#define BME680_RUN_GAS_POS UINT8_C(4)
/** Array Index to Field data mapping for Calibration Data*/
#define BME680_T2_LSB_REG (1)
#define BME680_T2_MSB_REG (2)
#define BME680_T3_REG (3)
#define BME680_P1_LSB_REG (5)
#define BME680_P1_MSB_REG (6)
#define BME680_P2_LSB_REG (7)
#define BME680_P2_MSB_REG (8)
#define BME680_P3_REG (9)
#define BME680_P4_LSB_REG (11)
#define BME680_P4_MSB_REG (12)
#define BME680_P5_LSB_REG (13)
#define BME680_P5_MSB_REG (14)
#define BME680_P7_REG (15)
#define BME680_P6_REG (16)
#define BME680_P8_LSB_REG (19)
#define BME680_P8_MSB_REG (20)
#define BME680_P9_LSB_REG (21)
#define BME680_P9_MSB_REG (22)
#define BME680_P10_REG (23)
#define BME680_H2_MSB_REG (25)
#define BME680_H2_LSB_REG (26)
#define BME680_H1_LSB_REG (26)
#define BME680_H1_MSB_REG (27)
#define BME680_H3_REG (28)
#define BME680_H4_REG (29)
#define BME680_H5_REG (30)
#define BME680_H6_REG (31)
#define BME680_H7_REG (32)
#define BME680_T1_LSB_REG (33)
#define BME680_T1_MSB_REG (34)
#define BME680_GH2_LSB_REG (35)
#define BME680_GH2_MSB_REG (36)
#define BME680_GH1_REG (37)
#define BME680_GH3_REG (38)
/** BME680 register buffer index settings*/
#define BME680_REG_FILTER_INDEX UINT8_C(5)
#define BME680_REG_TEMP_INDEX UINT8_C(4)
#define BME680_REG_PRES_INDEX UINT8_C(4)
#define BME680_REG_HUM_INDEX UINT8_C(2)
#define BME680_REG_NBCONV_INDEX UINT8_C(1)
#define BME680_REG_RUN_GAS_INDEX UINT8_C(1)
#define BME680_REG_HCTRL_INDEX UINT8_C(0)
/** Macro to combine two 8 bit data's to form a 16 bit data */
#define BME680_CONCAT_BYTES(msb, lsb) (((uint16_t)msb << 8) | (uint16_t)lsb)
/** Macro to SET and GET BITS of a register */
#define BME680_SET_BITS(reg_data, bitname, data) \
((reg_data & ~(bitname##_MSK)) | \
((data << bitname##_POS) & bitname##_MSK))
#define BME680_GET_BITS(reg_data, bitname) ((reg_data & (bitname##_MSK)) >> \
(bitname##_POS))
/** Macro variant to handle the bitname position if it is zero */
#define BME680_SET_BITS_POS_0(reg_data, bitname, data) \
((reg_data & ~(bitname##_MSK)) | \
(data & bitname##_MSK))
#define BME680_GET_BITS_POS_0(reg_data, bitname) (reg_data & (bitname##_MSK))
/** Type definitions */
/*
* Generic communication function pointer
* @param[in] dev_id: Place holder to store the id of the device structure
* Can be used to store the index of the Chip select or
* I2C address of the device.
* @param[in] reg_addr: Used to select the register the where data needs to
* be read from or written to.
* @param[in/out] reg_data: Data array to read/write
* @param[in] len: Length of the data array
*/
typedef int8_t (*bme680_com_fptr_t)(uint8_t dev_id, uint8_t reg_addr, uint8_t *data, uint16_t len);
/*
* Delay function pointer
* @param[in] period: Time period in milliseconds
*/
typedef void (*bme680_delay_fptr_t)(uint32_t period);
/*!
* @brief Interface selection Enumerations
*/
enum bme680_intf {
/*! SPI interface */
BME680_SPI_INTF,
/*! I2C interface */
BME680_I2C_INTF
};
/* structure definitions */
/*!
* @brief Sensor field data structure
*/
struct bme680_field_data {
/*! Contains new_data, gasm_valid & heat_stab */
uint8_t status;
/*! The index of the heater profile used */
uint8_t gas_index;
/*! Measurement index to track order */
uint8_t meas_index;
/*! Temperature in degree celsius x100 */
int16_t temperature;
/*! Pressure in Pascal */
uint32_t pressure;
/*! Humidity in % relative humidity x1000 */
uint32_t humidity;
/*! Gas resistance in Ohms */
uint32_t gas_resistance;
};
/*!
* @brief Structure to hold the Calibration data
*/
struct bme680_calib_data {
/*! Variable to store calibrated humidity data */
uint16_t par_h1;
/*! Variable to store calibrated humidity data */
uint16_t par_h2;
/*! Variable to store calibrated humidity data */
int8_t par_h3;
/*! Variable to store calibrated humidity data */
int8_t par_h4;
/*! Variable to store calibrated humidity data */
int8_t par_h5;
/*! Variable to store calibrated humidity data */
uint8_t par_h6;
/*! Variable to store calibrated humidity data */
int8_t par_h7;
/*! Variable to store calibrated gas data */
int8_t par_gh1;
/*! Variable to store calibrated gas data */
int16_t par_gh2;
/*! Variable to store calibrated gas data */
int8_t par_gh3;
/*! Variable to store calibrated temperature data */
uint16_t par_t1;
/*! Variable to store calibrated temperature data */
int16_t par_t2;
/*! Variable to store calibrated temperature data */
int8_t par_t3;
/*! Variable to store calibrated pressure data */
uint16_t par_p1;
/*! Variable to store calibrated pressure data */
int16_t par_p2;
/*! Variable to store calibrated pressure data */
int8_t par_p3;
/*! Variable to store calibrated pressure data */
int16_t par_p4;
/*! Variable to store calibrated pressure data */
int16_t par_p5;
/*! Variable to store calibrated pressure data */
int8_t par_p6;
/*! Variable to store calibrated pressure data */
int8_t par_p7;
/*! Variable to store calibrated pressure data */
int16_t par_p8;
/*! Variable to store calibrated pressure data */
int16_t par_p9;
/*! Variable to store calibrated pressure data */
uint8_t par_p10;
/*! Variable to store t_fine size */
int32_t t_fine;
/*! Variable to store heater resistance range */
uint8_t res_heat_range;
/*! Variable to store heater resistance value */
int8_t res_heat_val;
/*! Variable to store error range */
int8_t range_sw_err;
};
/*!
* @brief BME680 sensor settings structure which comprises of ODR,
* over-sampling and filter settings.
*/
struct bme680_tph_sett {
/*! Humidity oversampling */
uint8_t os_hum;
/*! Temperature oversampling */
uint8_t os_temp;
/*! Pressure oversampling */
uint8_t os_pres;
/*! Filter coefficient */
uint8_t filter;
};
/*!
* @brief BME680 gas sensor which comprises of gas settings
* and status parameters
*/
struct bme680_gas_sett {
/*! Variable to store nb conversion */
uint8_t nb_conv;
/*! Variable to store heater control */
uint8_t heatr_ctrl;
/*! Run gas enable value */
uint8_t run_gas;
/*! Pointer to store heater temperature */
uint16_t heatr_temp;
/*! Pointer to store duration profile */
uint16_t heatr_dur;
};
/*!
* @brief BME680 device structure
*/
struct bme680_dev {
/*! Chip Id */
uint8_t chip_id;
/*! Device Id */
uint8_t dev_id;
/*! SPI/I2C interface */
enum bme680_intf intf;
/*! Memory page used */
uint8_t mem_page;
/*! Ambient temperature in Degree C*/
int8_t amb_temp;
/*! Sensor calibration data */
struct bme680_calib_data calib;
/*! Sensor settings */
struct bme680_tph_sett tph_sett;
/*! Gas Sensor settings */
struct bme680_gas_sett gas_sett;
/*! Sensor power modes */
uint8_t power_mode;
/*! New sensor fields */
uint8_t new_fields;
/*! Store the info messages */
uint8_t info_msg;
/*! Burst read structure */
bme680_com_fptr_t read;
/*! Burst write structure */
bme680_com_fptr_t write;
/*! Delay in ms */
bme680_delay_fptr_t delay_ms;
/*! Communication function result */
int8_t com_rslt;
};
#endif /* BME680_DEFS_H_ */
/** @}*/
/** @}*/

File diff suppressed because it is too large Load Diff

@ -5,6 +5,9 @@ idf_component_register(SRCS
sntp_cli.c
utils.c
wifi_conn.c
voc_sensor.c
periph_init.c
i2c_utils.c
console/console_ioimpl.c
console/console_server.c
console/register_cmds.c

@ -1,13 +1,17 @@
menu "IRBLASTER Configuration"
menu "App Configuration"
menu "Pin mapping"
config PIN_I2C_SDA0
int "I2C0 SDA"
default 18
default 16
config PIN_I2C_SCL0
int "I2C0 SCL"
default 19
default 17
config PIN_SENSEAIR_NRDY
int "SenseAir nRDY"
default 18
endmenu
menu "Console"

@ -19,6 +19,9 @@
#include "wifi_conn.h"
#include "console/register_cmds.h"
#include "periph_init.h"
#include "voc_sensor.h"
#include "tasks.h"
static const char *TAG = "main";
@ -51,6 +54,10 @@ void app_main(void) {
g_State.wifi_inited = true;
}
periph_init();
xTaskCreate(voc_read_task, "VOC", 4096, NULL, PRIO_NORMAL, NULL);
console_init(NULL);
register_console_commands();

@ -0,0 +1,61 @@
#include <esp_err.h>
#include <driver/i2c.h>
#include "i2c_utils.h"
esp_err_t i2c_reg_read_byte(i2c_cmd_handle_t chain, uint8_t dev_addr, uint8_t reg_addr, uint8_t *dest)
{
esp_err_t suc;
#define TRY(x) suc=x;if(suc!=ESP_OK)return suc;
TRY(i2c_master_start(chain));
TRY(i2c_master_write_byte(chain, (dev_addr << 1) | I2C_MASTER_WRITE, /*check ack*/true));
TRY(i2c_master_write_byte(chain, reg_addr, /*check ack*/true));
TRY(i2c_master_start(chain));
TRY(i2c_master_write_byte(chain, (dev_addr << 1) | I2C_MASTER_READ, /*check ack*/true));
TRY(i2c_master_read_byte(chain, dest, I2C_MASTER_NACK));
TRY(i2c_master_stop(chain));
return ESP_OK;
#undef TRY
}
esp_err_t i2c_reg_read(i2c_cmd_handle_t chain, uint8_t dev_addr, uint8_t reg_addr, uint8_t *dest, size_t count)
{
esp_err_t suc;
#define TRY(x) suc=x;if(suc!=ESP_OK)return suc;
TRY(i2c_master_start(chain));
TRY(i2c_master_write_byte(chain, (dev_addr << 1) | I2C_MASTER_WRITE, /*check ack*/true));
TRY(i2c_master_write_byte(chain, reg_addr, /*check ack*/true));
TRY(i2c_master_start(chain));
TRY(i2c_master_write_byte(chain, (dev_addr << 1) | I2C_MASTER_READ, /*check ack*/true));
TRY(i2c_master_read(chain, dest, count, I2C_MASTER_LAST_NACK));
TRY(i2c_master_stop(chain));
return ESP_OK;
#undef TRY
}
esp_err_t i2c_reg_write_byte(i2c_cmd_handle_t chain, uint8_t dev_addr, uint8_t reg_addr, uint8_t value)
{
esp_err_t suc;
#define TRY(x) suc=x;if(suc!=ESP_OK)return suc;
TRY(i2c_master_start(chain));
TRY(i2c_master_write_byte(chain, (dev_addr << 1) | I2C_MASTER_WRITE, true));
TRY(i2c_master_write_byte(chain, reg_addr, true));
TRY(i2c_master_write_byte(chain, value, true));
TRY(i2c_master_stop(chain));
return ESP_OK;
#undef TRY
}
esp_err_t i2c_reg_write(i2c_cmd_handle_t chain, uint8_t dev_addr, uint8_t reg_addr, const uint8_t *values, size_t count)
{
esp_err_t suc;
#define TRY(x) suc=x;if(suc!=ESP_OK)return suc;
TRY(i2c_master_start(chain));
TRY(i2c_master_write_byte(chain, (dev_addr << 1) | I2C_MASTER_WRITE, true));
TRY(i2c_master_write_byte(chain, reg_addr, true));
TRY(i2c_master_write(chain, (uint8_t*)values, count, true));
TRY(i2c_master_stop(chain));
return ESP_OK;
#undef TRY
}

@ -0,0 +1,15 @@
/**
* TODO file description
*
* Created on 2021/12/12.
*/
#ifndef ESPNODE_I2C_UTILS_H
#define ESPNODE_I2C_UTILS_H
esp_err_t i2c_reg_read_byte(i2c_cmd_handle_t chain, uint8_t dev_addr, uint8_t reg_addr, uint8_t *dest);
esp_err_t i2c_reg_read(i2c_cmd_handle_t chain, uint8_t dev_addr, uint8_t reg_addr, uint8_t *dest, size_t count);
esp_err_t i2c_reg_write_byte(i2c_cmd_handle_t chain, uint8_t dev_addr, uint8_t reg_addr, uint8_t value);
esp_err_t i2c_reg_write(i2c_cmd_handle_t chain, uint8_t dev_addr, uint8_t reg_addr, const uint8_t *values, size_t count);
#endif //ESPNODE_I2C_UTILS_H

@ -0,0 +1,33 @@
#include <esp_log.h>
#include "periph_init.h"
#include "driver/i2c.h"
static const char *TAG = "periph_init";
esp_err_t periph_init() {
esp_err_t rv;
ESP_LOGI(TAG, "Init I2C");
int i2c_master_port = I2C_NUM_0;
i2c_config_t conf = {
.mode = I2C_MODE_MASTER,
.sda_io_num = CONFIG_PIN_I2C_SDA0,
.sda_pullup_en = GPIO_PULLUP_ENABLE, // is this enough?
.scl_io_num = CONFIG_PIN_I2C_SCL0,
.scl_pullup_en = GPIO_PULLUP_ENABLE,
.master.clk_speed = 100000,
};
rv = i2c_param_config(i2c_master_port, &conf);
if (rv != ESP_OK) {
ESP_LOGE(TAG, "Err in i2c_param_config");
return rv;
}
rv = i2c_driver_install(i2c_master_port, conf.mode, 0, 0, 0);
if (rv != ESP_OK) {
ESP_LOGE(TAG, "Err in i2c_driver_install");
return rv;
}
return ESP_OK;
}

@ -0,0 +1,14 @@
/**
* TODO file description
*
* Created on 2021/12/12.
*/
#ifndef ESPNODE_PERIPH_INIT_H
#define ESPNODE_PERIPH_INIT_H
#include <esp_err.h>
esp_err_t periph_init();
#endif //ESPNODE_PERIPH_INIT_H

@ -0,0 +1,268 @@
//
// Created by MightyPork on 2017/11/17.
//
#define LOG_LOCAL_LEVEL ESP_LOG_DEBUG
#include <esp_log.h>
#include <esp_err.h>
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include <driver/i2c.h>
#include "voc_sensor.h"
struct bme680_dev gas_sensor;
static const char *TAG = "vocsensor";
#define i2c_num I2C_NUM_0
#define WRITE_BIT I2C_MASTER_WRITE /*!< I2C master write */
#define READ_BIT I2C_MASTER_READ /*!< I2C master read */
#define ACK_CHECK_EN 0x1 /*!< I2C master will check ack from slave*/
#define ACK_CHECK_DIS 0x0 /*!< I2C master will not check ack from slave */
#define ACK_VAL 0x0 /*!< I2C ack value */
#define NACK_VAL 0x1 /*!< I2C nack value */
static void user_delay_ms(uint32_t period) {
/*
* Return control or wait,
* for a period amount of milliseconds
*/
vTaskDelay(pdMS_TO_TICKS(period));
}
#if 0
static int8_t user_spi_read(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
{
int8_t rslt = 0; /* Return 0 for Success, non-zero for failure */
/*
* The parameter dev_id can be used as a variable to select which Chip Select pin has
* to be set low to activate the relevant device on the SPI bus
*/
/*
* Data on the bus should be like
* |----------------+---------------------+-------------|
* | MOSI | MISO | Chip Select |
* |----------------+---------------------|-------------|
* | (don't care) | (don't care) | HIGH |
* | (reg_addr) | (don't care) | LOW |
* | (don't care) | (reg_data[0]) | LOW |
* | (....) | (....) | LOW |
* | (don't care) | (reg_data[len - 1]) | LOW |
* | (don't care) | (don't care) | HIGH |
* |----------------+---------------------|-------------|
*/
return rslt;
}
static int8_t user_spi_write(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
{
int8_t rslt = 0; /* Return 0 for Success, non-zero for failure */
/*
* The parameter dev_id can be used as a variable to select which Chip Select pin has
* to be set low to activate the relevant device on the SPI bus
*/
/*
* Data on the bus should be like
* |---------------------+--------------+-------------|
* | MOSI | MISO | Chip Select |
* |---------------------+--------------|-------------|
* | (don't care) | (don't care) | HIGH |
* | (reg_addr) | (don't care) | LOW |
* | (reg_data[0]) | (don't care) | LOW |
* | (....) | (....) | LOW |
* | (reg_data[len - 1]) | (don't care) | LOW |
* | (don't care) | (don't care) | HIGH |
* |---------------------+--------------|-------------|
*/
return rslt;
}
#endif
static int8_t user_i2c_read(uint8_t dev_id, uint8_t reg_addr, uint8_t *data_rd, uint16_t size) {
ESP_LOGD(TAG, "BME680 i2c read");
/*
* The parameter dev_id can be used as a variable to store the I2C address of the device
*/
/*
* Data on the bus should be like
* |------------+---------------------|
* | I2C action | Data |
* |------------+---------------------|
* | Start | - |
* | Write | (reg_addr) |
* | Stop | - |
* | Start | - |
* | Read | (reg_data[0]) |
* | Read | (....) |
* | Read | (reg_data[len - 1]) |
* | Stop | - |
* |------------+---------------------|
*/
if (size == 0) {
return 0;
}
i2c_cmd_handle_t cmd = i2c_cmd_link_create();
i2c_master_start(cmd);
i2c_master_write_byte(cmd, (dev_id << 1) | I2C_MASTER_WRITE, ACK_CHECK_EN);
i2c_master_write_byte(cmd, reg_addr, ACK_CHECK_EN);
i2c_master_start(cmd);
i2c_master_write_byte(cmd, (dev_id << 1) | I2C_MASTER_READ, ACK_CHECK_EN);
i2c_master_read(cmd, data_rd, size, I2C_MASTER_LAST_NACK);
i2c_master_stop(cmd);
esp_err_t ret = i2c_master_cmd_begin(i2c_num, cmd, pdMS_TO_TICKS(1000));
i2c_cmd_link_delete(cmd);
// HAL_I2C_Master_Transmit(&hi2c1, dev_id<<1, &reg_addr, 1, 100);
// HAL_I2C_Master_Receive(&hi2c1, dev_id<<1, reg_data, len, 100);
return ret == ESP_OK ? BME680_OK : BME680_E_COM_FAIL;
}
static int8_t user_i2c_write(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data, uint16_t len) {
ESP_LOGD(TAG, "BME680 i2c write");
/*
* The parameter dev_id can be used as a variable to store the I2C address of the device
*/
/*
* Data on the bus should be like
* |------------+---------------------|
* | I2C action | Data |
* |------------+---------------------|
* | Start | - |
* | Write | (reg_addr) |
* | Write | (reg_data[0]) |
* | Write | (....) |
* | Write | (reg_data[len - 1]) |
* | Stop | - |
* |------------+---------------------|
*/
//HAL_I2C_Master_Transmit(&hi2c1, dev_id<<1, &data[0], (uint16_t) (len + 1), 100);
i2c_cmd_handle_t cmd = i2c_cmd_link_create();
i2c_master_start(cmd);
i2c_master_write_byte(cmd, (dev_id << 1) | I2C_MASTER_WRITE, ACK_CHECK_EN);
i2c_master_write_byte(cmd, reg_addr, ACK_CHECK_EN);
i2c_master_write(cmd, reg_data, len, ACK_CHECK_EN);
i2c_master_stop(cmd);
esp_err_t ret = i2c_master_cmd_begin(i2c_num, cmd, pdMS_TO_TICKS(1000));
i2c_cmd_link_delete(cmd);
return ret == ESP_OK ? BME680_OK : BME680_E_COM_FAIL;
}
esp_err_t voc_init(void) {
int8_t rslt;
gas_sensor.dev_id = BME680_I2C_ADDR_PRIMARY;
gas_sensor.intf = BME680_I2C_INTF;
gas_sensor.read = user_i2c_read;
gas_sensor.write = user_i2c_write;
gas_sensor.delay_ms = user_delay_ms;
ESP_LOGD(TAG, "BME680 initializing");
rslt = bme680_init(&gas_sensor);
if (rslt != BME680_OK) {
ESP_LOGE(TAG, "Error from bme680_init: %d", rslt);
return ESP_FAIL;
}
ESP_LOGD(TAG, "BME680 configuring");
/* Set the temperature, pressure and humidity settings */
gas_sensor.tph_sett.os_hum = BME680_OS_2X;
gas_sensor.tph_sett.os_pres = BME680_OS_4X;
gas_sensor.tph_sett.os_temp = BME680_OS_8X;
gas_sensor.tph_sett.filter = BME680_FILTER_SIZE_3;
/* Set the remaining gas sensor settings and link the heating profile */
gas_sensor.gas_sett.run_gas = BME680_ENABLE_GAS_MEAS;
/* Create a ramp heat waveform in 3 steps */
gas_sensor.gas_sett.heatr_temp = 320; /* degree Celsius */
gas_sensor.gas_sett.heatr_dur = 150; /* milliseconds */
/* Select the power mode */
/* Must be set before writing the sensor configuration */
gas_sensor.power_mode = BME680_FORCED_MODE;
/* Set the required sensor settings needed */
uint8_t set_required_settings = BME680_OST_SEL | BME680_OSP_SEL | BME680_OSH_SEL | BME680_FILTER_SEL | BME680_GAS_SENSOR_SEL;
/* Set the desired sensor configuration */
rslt = bme680_set_sensor_settings(set_required_settings, &gas_sensor);
if (rslt != BME680_OK) {
ESP_LOGE(TAG, "Error from bme680_set_sensor_settings: %d", rslt);
return ESP_FAIL;
}
return ESP_OK;
}
uint32_t voc_start_measure(void) {
/* Set the power mode */
int8_t rslt;
rslt = bme680_set_sensor_mode(&gas_sensor);
if (rslt != BME680_OK) {
ESP_LOGE(TAG, "Error from bme680_set_sensor_mode: %d", rslt);
return 0;
}
/* Get the total measurement duration so as to sleep or wait till the
* measurement is complete */
uint16_t meas_period;
bme680_get_profile_dur(&meas_period, &gas_sensor);
meas_period += 10; // add some extra safety margin
ESP_LOGD(TAG, "Measurement will take %d ms\r\n", meas_period);
return meas_period;
}
esp_err_t voc_read(struct bme680_field_data *data) {
/* Set the power mode */
int8_t rslt;
rslt = bme680_get_sensor_data(data, &gas_sensor);
if (rslt != BME680_OK) {
ESP_LOGE(TAG, "Error from bme680_get_sensor_data: %d", rslt);
return ESP_FAIL;
}
ESP_LOGI(TAG, "T: %d/100 degC, P: %d/100 hPa, H %d/1000 %%rH ", data->temperature, data->pressure, data->humidity);
/* Avoid using measurements from an unstable heating setup */
if (data->status & BME680_GASM_VALID_MSK) {
ESP_LOGI(TAG, "G: %d ohms", data->gas_resistance);
}
return ESP_OK;
}
void voc_read_task(void *param) {
ESP_LOGI(TAG, "VOC sensor init");
voc_init();
struct bme680_field_data data;
while (1) {
ESP_LOGI(TAG, "VOC sensor meas");
uint32_t mswait = voc_start_measure();
vTaskDelay(pdMS_TO_TICKS(mswait));
ESP_LOGI(TAG, "VOC sensor read");
voc_read(&data);
// TODO do something with it
vTaskDelay(pdMS_TO_TICKS(1000));
}
}

@ -0,0 +1,18 @@
//
// Created by MightyPork on 2017/11/17.
//
#ifndef PROJ_VOC_SENSOR_H
#define PROJ_VOC_SENSOR_H
#include <bme680.h>
#include <esp_err.h>
extern struct bme680_dev gas_sensor;
esp_err_t voc_init(void);
uint32_t voc_start_measure(void);
esp_err_t voc_read(struct bme680_field_data *data);
void voc_read_task(void *param);
#endif //PROJ_VOC_SENSOR_H

@ -126,14 +126,15 @@ CONFIG_PARTITION_TABLE_MD5=y
# end of Partition Table
#
# IRBLASTER Configuration
# App Configuration
#
#
# Pin mapping
#
CONFIG_PIN_I2C_SDA0=18
CONFIG_PIN_I2C_SCL0=19
CONFIG_PIN_I2C_SDA0=16
CONFIG_PIN_I2C_SCL0=17
CONFIG_PIN_SENSEAIR_NRDY=18
# end of Pin mapping
#
@ -142,7 +143,7 @@ CONFIG_PIN_I2C_SCL0=19
CONFIG_CONSOLE_TELNET_PORT=23
CONFIG_CONSOLE_PW_LEN=32
# end of Console
# end of IRBLASTER Configuration
# end of App Configuration
#
# Compiler options

Loading…
Cancel
Save