rtl-sdr

Steve Markgraf a943a2ed25 tuner_fc001x: check if PLL values are within boundaries This fixes the issue of the FC0013 locking up at frequencies between 928.0 and 950.0 MHz, which happened because the numerator of the fraction exceeded its 5 bit limit. For the tuner to behave normally again, the dongle needed to be replugged. For the FC0013 this now results in a small gap between 948.6 MHz and 950.0 MHz, where no valid PLL values are existant. For the FC0012 tuning is aborted when the maximum frequency has been reached (948.6 MHz). Signed-off-by: Steve Markgraf <steve@steve-m.de>		14 년 전
cmake	add win32 compatibility	14 년 전
include	disable second ADC in IF mode, make input selectable in DS-mode	14 년 전
m4	add autotools based build system	14 년 전
src	tuner_fc001x: check if PLL values are within boundaries	14 년 전
.gitignore	add Cmake generated files to .gitignore	14 년 전
AUTHORS	add initial version of tcp server	14 년 전
CMakeLists.txt	don't install udev rules by default, as it may pollute the system	14 년 전
COPYING	add autotools based build system	14 년 전
Doxyfile.in	add autotools based build system	14 년 전
Makefile.am	don't install udev rules by default, as it may pollute the system	14 년 전
README	adjust project slogan	14 년 전
configure.ac	build rtl_fm	14 년 전
git-version-gen	add autotools based build system	14 년 전
librtlsdr.pc.in	install pkg-config file when building with cmake	14 년 전
rtl-sdr.rules	add pid of MyGica TD312 stick	14 년 전

README

rtl-sdr
turns your Realtek RTL2832 based DVB dongle into a SDR receiver
======================================================================

For more information see:
http://sdr.osmocom.org/trac/wiki/rtl-sdr