MightyPork
/
rtl-sdr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

add support for autoprobing the tuners

Browse Source 
Signed-off-by: Steve Markgraf <steve@steve-m.de>
master
Steve Markgraf 13 years ago
parent c09fbb7c57
commit ff79104824
5 changed files with 99 additions and 117 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 111
      include/tuner_e4000.h
  2. 4
      include/tuner_fc0013.h
  3. 96
      src/rtl-sdr.c
  4. 2
      src/tuner_e4000.c
  5. 1
      src/tuner_fc0013.c

111
include/tuner_e4000.h
Unescape View File

@ -1,120 +1,15 @@
#ifndef __TUNER_E4000_H
#define __TUNER_E4000_H
/**
@file
@brief E4000 tuner module declaration
One can manipulate E4000 tuner through E4000 module.
E4000 module is derived from tuner module.
@par Example:
@code
// The example is the same as the tuner example in tuner_base.h except the listed lines.
#include "tuner_e4000.h"
...
int main(void)
{
TUNER_MODULE *pTuner;
E4000_EXTRA_MODULE *pTunerExtra;
TUNER_MODULE TunerModuleMemory;
BASE_INTERFACE_MODULE BaseInterfaceModuleMemory;
// I2C_BRIDGE_MODULE I2cBridgeModuleMemory;
unsigned long BandwidthMode;
...
// Build E4000 tuner module.
BuildE4000Module(
&pTuner,
&TunerModuleMemory,
&BaseInterfaceModuleMemory,
&I2cBridgeModuleMemory,
0xac, // I2C device address is 0xac in 8-bit format.
CRYSTAL_FREQ_16384000HZ, // Crystal frequency is 16.384 MHz.
E4000_AGC_INTERNAL // The E4000 AGC mode is internal AGC mode.
);
// Get E4000 tuner extra module.
pTunerExtra = (T2266_EXTRA_MODULE *)(pTuner->pExtra);
// ==== Initialize tuner and set its parameters =====
...
// Set E4000 bandwidth.
pTunerExtra->SetBandwidthMode(pTuner, E4000_BANDWIDTH_6MHZ);
// ==== Get tuner information =====
...
// Get E4000 bandwidth.
pTunerExtra->GetBandwidthMode(pTuner, &BandwidthMode);
// See the example for other tuner functions in tuner_base.h
return 0;
}
@endcode
*/
//#include "tuner_base.h"
// The following context is implemented for E4000 source code.
// Definition (implemeted for E4000)
#define E4000_1_SUCCESS 1
#define E4000_1_FAIL 0
#define E4000_I2C_SUCCESS 1
#define E4000_I2C_FAIL 0
#define E4K_I2C_ADDR 0xc8
#define E4K_CHECK_ADDR 0x02
#define E4K_CHECK_VAL 0x40
// Function (implemeted for E4000)
int

4
include/tuner_fc0013.h
Unescape View File

@ -15,6 +15,10 @@ FC0013 module is derived from tuner module.
**/
#define FC0013_I2C_ADDR 0xc6
#define FC0013_CHECK_ADDR 0x00
#define FC0013_CHECK_VAL 0xa3
// Definitions
enum FC0013_TRUE_FALSE_STATUS
{

96
src/rtl-sdr.c
Unescape View File

@ -44,7 +44,7 @@ int fc0013_init(void *dev) { return FC0013_Open(dev); }
int fc0013_exit(void *dev) { return 0; }
int fc0013_tune(void *dev, int freq) {
/* read bandwidth mode to reapply it */
int bw = 0;
unsigned int bw = 6;
//fc0013_GetBandwidthMode(dev, &bw); // FIXME: missing
return FC0013_SetFrequency(dev, freq/1000, bw & 0xff);
}
@ -57,10 +57,9 @@ int fc0013_set_bw(void *dev, int bw) {
}
enum rtlsdr_tuners {
RTLSDR_TUNER_UNDEF,
RTLSDR_TUNER_E4000,
RTLSDR_TUNER_FC0012,
RTLSDR_TUNER_FC0013
RTLSDR_TUNER_FC0013,
};
typedef struct rtlsdr_tuner {
@ -161,6 +160,23 @@ int rtlsdr_write_array(rtlsdr_dev_t *dev, uint8_t block, uint16_t addr, uint8_t
return r;
}
int rtlsdr_i2c_write_reg(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t data)
{
uint16_t addr = i2c_addr;
return rtlsdr_write_array(dev, IICB, addr, &data, 1);
}
uint8_t rtlsdr_i2c_read_reg(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t reg)
{
uint16_t addr = i2c_addr;
uint8_t data;
rtlsdr_write_array(dev, IICB, addr, &reg, 1);
rtlsdr_read_array(dev, IICB, addr, &data, 1);
return data;
}
int rtlsdr_i2c_write(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t *buffer, int len)
{
uint16_t addr = i2c_addr;
@ -251,6 +267,27 @@ void rtlsdr_demod_write_reg(rtlsdr_dev_t *dev, uint8_t page, uint16_t addr, uint
rtlsdr_demod_read_reg(dev, 0x0a, 0x01, 1);
}
void rtlsdr_set_gpio_bit(rtlsdr_dev_t *dev, uint8_t gpio, int val)
{
uint8_t r;
gpio = 1 << gpio;
r = rtlsdr_read_reg(dev, SYSB, GPO, 1);
r = val ? (r | gpio) : (r & ~gpio);
rtlsdr_write_reg(dev, SYSB, GPO, r, 1);
}
void rtlsdr_set_gpio_output(rtlsdr_dev_t *dev, uint8_t gpio)
{
int r;
gpio = 1 << gpio;
r = rtlsdr_read_reg(dev, SYSB, GPD, 1);
rtlsdr_write_reg(dev, SYSB, GPO, r & ~gpio, 1);
r = rtlsdr_read_reg(dev, SYSB, GPOE, 1);
rtlsdr_write_reg(dev, SYSB, GPOE, r | gpio, 1);
}
void rtlsdr_set_i2c_repeater(rtlsdr_dev_t *dev, int on)
{
rtlsdr_demod_write_reg(dev, 1, 0x01, on ? 0x18 : 0x10, 1);
@ -464,6 +501,15 @@ const char *rtlsdr_get_device_name(uint32_t index)
return "";
}
/* TODO: put those defines in the tuner header once the drivers are added */
#define FC0012_I2C_ADDR 0xc6
#define FC0012_CHECK_ADDR 0x00
#define FC0012_CHECK_VAL 0xa1
#define FC2580_I2C_ADDR 0xac
#define FC2580_CHECK_ADDR 0x01
#define FC2580_CHECK_VAL 0x56
rtlsdr_dev_t *rtlsdr_open(int index)
{
int r;
@ -473,6 +519,7 @@ rtlsdr_dev_t *rtlsdr_open(int index)
libusb_device *device = NULL;
uint32_t device_count = 0;
struct libusb_device_descriptor dd;
uint8_t reg;
dev = malloc(sizeof(rtlsdr_dev_t));
memset(dev, 0, sizeof(rtlsdr_dev_t));
@ -514,10 +561,49 @@ rtlsdr_dev_t *rtlsdr_open(int index)
rtlsdr_init_baseband(dev);
// TODO: probe the tuner and set dev->tuner member to appropriate tuner object
// dev->tuner = &tuners[...];
/* Probe tuners */
rtlsdr_set_i2c_repeater(dev, 1);
reg = rtlsdr_i2c_read_reg(dev, E4K_I2C_ADDR, E4K_CHECK_ADDR);
if (reg == E4K_CHECK_VAL) {
printf("Found Elonics E4000 tuner\n");
dev->tuner = &tuners[RTLSDR_TUNER_E4000];
goto found;
}
reg = rtlsdr_i2c_read_reg(dev, FC0013_I2C_ADDR, FC0013_CHECK_ADDR);
if (reg == FC0013_CHECK_VAL) {
printf("Found Fitipower FC0013 tuner\n");
dev->tuner = &tuners[RTLSDR_TUNER_FC0013];
goto found;
}
reg = rtlsdr_i2c_read_reg(dev, FC2580_I2C_ADDR, FC2580_CHECK_ADDR);
if ((reg & 0x7f) == FC2580_CHECK_VAL) {
printf("Found FCI 2580 tuner\n");
//dev->tuner = &tuners[RTLSDR_TUNER_FC2580];
// TODO: set GPIO5 low
goto found;
}
/* initialise GPIOs (only needed for the FC0012 so far */
rtlsdr_set_gpio_output(dev, 5);
/* reset FC0012 before probing */
rtlsdr_set_gpio_bit(dev, 5, 1);
rtlsdr_set_gpio_bit(dev, 5, 0);
reg = rtlsdr_i2c_read_reg(dev, FC0012_I2C_ADDR, FC0012_CHECK_ADDR);
if (reg == FC0012_CHECK_VAL) {
printf("Found Fitipower FC0012 tuner\n");
dev->tuner = &tuners[RTLSDR_TUNER_FC0012];
goto found;
}
found:
rtlsdr_set_i2c_repeater(dev, 0);
return dev;
err:
return NULL;
}

2
src/tuner_e4000.c
Unescape View File

@ -18,9 +18,7 @@
#define I2C_BUFFER_LEN 128
#define YES 1
#define NO 0
#define CRYSTAL_FREQ 28800000
#define E4K_I2C_ADDR 0xc8
/* glue functions to rtl-sdr code */
int

1
src/tuner_fc0013.c
Unescape View File

@ -11,7 +11,6 @@
#include "tuner_fc0013.h"
#define CRYSTAL_FREQ 28800000
#define FC0013_I2C_ADDR 0xc6
/* glue functions to rtl-sdr code */
int FC0013_Write(void *pTuner, unsigned char RegAddr, unsigned char Byte)

Write Preview
Loading…
Cancel
Save