MightyPork
/
rtl-sdr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

add support for R828D tuner

Browse Source 
Signed-off-by: Steve Markgraf <steve@steve-m.de>
master
Steve Markgraf 11 years ago
parent 230930e975
commit e61731d230
4 changed files with 90 additions and 60 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 5
      include/rtl-sdr.h
  2. 9
      include/tuner_r82xx.h
  3. 81
      src/librtlsdr.c
  4. 55
      src/tuner_r82xx.c

5
include/rtl-sdr.h
Unescape View File

@ -1,6 +1,6 @@
/*
* rtl-sdr, turns your Realtek RTL2832 based DVB dongle into a SDR receiver
* Copyright (C) 2012 by Steve Markgraf <steve@steve-m.de>
* Copyright (C) 2012-2013 by Steve Markgraf <steve@steve-m.de>
* Copyright (C) 2012 by Dimitri Stolnikov <horiz0n@gmx.net>
*
* This program is free software: you can redistribute it and/or modify
@ -175,7 +175,8 @@ enum rtlsdr_tuner {
RTLSDR_TUNER_FC0012,
RTLSDR_TUNER_FC0013,
RTLSDR_TUNER_FC2580,
RTLSDR_TUNER_R820T
RTLSDR_TUNER_R820T,
RTLSDR_TUNER_R828D
};
/*!

9
include/tuner_r82xx.h
Unescape View File

@ -26,8 +26,11 @@
#define R82XX_H
#define R820T_I2C_ADDR 0x34
#define R820T_CHECK_ADDR 0x00
#define R820T_CHECK_VAL 0x69
#define R828D_I2C_ADDR 0x74
#define R828D_XTAL_FREQ 16000000
#define R82XX_CHECK_ADDR 0x00
#define R82XX_CHECK_VAL 0x69
#define R82XX_IF_FREQ 3570000
@ -66,7 +69,6 @@ struct r82xx_config {
uint32_t xtal;
enum r82xx_chip rafael_chip;
unsigned int max_i2c_msg_len;
int use_diplexer;
int use_predetect;
};
@ -79,6 +81,7 @@ struct r82xx_priv {
uint16_t pll; /* kHz */
uint32_t int_freq;
uint8_t fil_cal_code;
uint8_t input;
int has_lock;
int init_done;

81
src/librtlsdr.c
Unescape View File

@ -184,13 +184,18 @@ int fc2580_set_gain_mode(void *dev, int manual) { return 0; }
int r820t_init(void *dev) {
rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
devt->r82xx_p.rtl_dev = dev;
devt->r82xx_c.i2c_addr = R820T_I2C_ADDR;
if (devt->tuner_type == RTLSDR_TUNER_R828D) {
devt->r82xx_c.i2c_addr = R828D_I2C_ADDR;
devt->r82xx_c.rafael_chip = CHIP_R828D;
} else {
devt->r82xx_c.i2c_addr = R820T_I2C_ADDR;
devt->r82xx_c.rafael_chip = CHIP_R820T;
}
rtlsdr_get_xtal_freq(devt, NULL, &devt->r82xx_c.xtal);
devt->r82xx_c.rafael_chip = CHIP_R820T;
devt->r82xx_c.max_i2c_msg_len = 2;
devt->r82xx_c.use_diplexer = 0;
devt->r82xx_c.use_predetect = 0;
devt->r82xx_p.cfg = &devt->r82xx_c;
@ -214,6 +219,7 @@ int r820t_set_gain_mode(void *dev, int manual) {
rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
return r82xx_set_gain(&devt->r82xx_p, manual, 0);
}
/* definition order must match enum rtlsdr_tuner */
static rtlsdr_tuner_iface_t tuners[] = {
{
@ -244,6 +250,11 @@ static rtlsdr_tuner_iface_t tuners[] = {
r820t_set_freq, r820t_set_bw, r820t_set_gain, NULL,
r820t_set_gain_mode
},
{
r820t_init, r820t_exit,
r820t_set_freq, r820t_set_bw, r820t_set_gain, NULL,
r820t_set_gain_mode
},
};
typedef struct rtlsdr_dongle {
@ -892,7 +903,7 @@ int rtlsdr_get_tuner_gains(rtlsdr_dev_t *dev, int *gains)
63, 65, 67, 68, 70, 71, 179, 181, 182,
184, 186, 188, 191, 197 };
const int fc2580_gains[] = { 0 /* no gain values */ };
const int r820t_gains[] = { 0, 9, 14, 27, 37, 77, 87, 125, 144, 157,
const int r82xx_gains[] = { 0, 9, 14, 27, 37, 77, 87, 125, 144, 157,
166, 197, 207, 229, 254, 280, 297, 328,
338, 364, 372, 386, 402, 421, 434, 439,
445, 480, 496 };
@ -918,7 +929,8 @@ int rtlsdr_get_tuner_gains(rtlsdr_dev_t *dev, int *gains)
ptr = fc2580_gains; len = sizeof(fc2580_gains);
break;
case RTLSDR_TUNER_R820T:
ptr = r820t_gains; len = sizeof(r820t_gains);
case RTLSDR_TUNER_R828D:
ptr = r82xx_gains; len = sizeof(r82xx_gains);
break;
default:
ptr = unknown_gains; len = sizeof(unknown_gains);
@ -1103,7 +1115,8 @@ int rtlsdr_set_direct_sampling(rtlsdr_dev_t *dev, int on)
rtlsdr_set_i2c_repeater(dev, 0);
}
if (dev->tuner_type == RTLSDR_TUNER_R820T) {
if ((dev->tuner_type == RTLSDR_TUNER_R820T) ||
(dev->tuner_type == RTLSDR_TUNER_R828D)) {
r |= rtlsdr_set_if_freq(dev, R82XX_IF_FREQ);
/* enable spectrum inversion */
@ -1145,7 +1158,8 @@ int rtlsdr_set_offset_tuning(rtlsdr_dev_t *dev, int on)
if (!dev)
return -1;
if (dev->tuner_type == RTLSDR_TUNER_R820T)
if ((dev->tuner_type == RTLSDR_TUNER_R820T) ||
(dev->tuner_type == RTLSDR_TUNER_R828D))
return -2;
if (dev->direct_sampling)
@ -1432,27 +1446,19 @@ int rtlsdr_open(rtlsdr_dev_t **out_dev, uint32_t index)
goto found;
}
reg = rtlsdr_i2c_read_reg(dev, R820T_I2C_ADDR, R820T_CHECK_ADDR);
if (reg == R820T_CHECK_VAL) {
reg = rtlsdr_i2c_read_reg(dev, R820T_I2C_ADDR, R82XX_CHECK_ADDR);
if (reg == R82XX_CHECK_VAL) {
fprintf(stderr, "Found Rafael Micro R820T tuner\n");
dev->tuner_type = RTLSDR_TUNER_R820T;
/* disable Zero-IF mode */
rtlsdr_demod_write_reg(dev, 1, 0xb1, 0x1a, 1);
/* only enable In-phase ADC input */
rtlsdr_demod_write_reg(dev, 0, 0x08, 0x4d, 1);
/* the R820T uses 3.57 MHz IF for the DVB-T 6 MHz mode, and
* 4.57 MHz for the 8 MHz mode */
rtlsdr_set_if_freq(dev, R82XX_IF_FREQ);
/* enable spectrum inversion */
rtlsdr_demod_write_reg(dev, 1, 0x15, 0x01, 1);
goto found;
}
reg = rtlsdr_i2c_read_reg(dev, R828D_I2C_ADDR, R82XX_CHECK_ADDR);
if (reg == R82XX_CHECK_VAL) {
fprintf(stderr, "Found Rafael Micro R828D tuner\n");
dev->tuner_type = RTLSDR_TUNER_R828D;
}
/* initialise GPIOs */
rtlsdr_set_gpio_output(dev, 5);
@ -1476,14 +1482,35 @@ int rtlsdr_open(rtlsdr_dev_t **out_dev, uint32_t index)
}
found:
if (dev->tuner_type == RTLSDR_TUNER_UNKNOWN) {
/* use the rtl clock value by default */
dev->tun_xtal = dev->rtl_xtal;
dev->tuner = &tuners[dev->tuner_type];
switch (dev->tuner_type) {
case RTLSDR_TUNER_R828D:
dev->tun_xtal = R828D_XTAL_FREQ;
case RTLSDR_TUNER_R820T:
/* disable Zero-IF mode */
rtlsdr_demod_write_reg(dev, 1, 0xb1, 0x1a, 1);
/* only enable In-phase ADC input */
rtlsdr_demod_write_reg(dev, 0, 0x08, 0x4d, 1);
/* the R82XX use 3.57 MHz IF for the DVB-T 6 MHz mode, and
* 4.57 MHz for the 8 MHz mode */
rtlsdr_set_if_freq(dev, R82XX_IF_FREQ);
/* enable spectrum inversion */
rtlsdr_demod_write_reg(dev, 1, 0x15, 0x01, 1);
break;
case RTLSDR_TUNER_UNKNOWN:
fprintf(stderr, "No supported tuner found\n");
rtlsdr_set_direct_sampling(dev, 1);
break;
default:
break;
}
dev->tuner = &tuners[dev->tuner_type];
dev->tun_xtal = dev->rtl_xtal; /* use the rtl clock value by default */
if (dev->tuner->init)
r = dev->tuner->init(dev);

55
src/tuner_r82xx.c
Unescape View File

@ -31,9 +31,8 @@
#include "tuner_r82xx.h"
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
#define VCO_POWER_REF 0x02
#define DIP_FREQ 32000000
#define MHZ(x) ((x)*1000*1000)
#define KHZ(x) ((x)*1000)
/*
* Static constants
@ -430,13 +429,14 @@ static int r82xx_set_pll(struct r82xx_priv *priv, uint32_t freq)
uint8_t mix_div = 2;
uint8_t div_buf = 0;
uint8_t div_num = 0;
uint8_t vco_power_ref = 2;
uint8_t refdiv2 = 0;
uint8_t ni, si, nint, vco_fine_tune, val;
uint8_t data[5];
/* Frequency in kHz */
freq_khz = (freq + 500) / 1000;
pll_ref = priv->cfg->xtal; // / 1000;
pll_ref = priv->cfg->xtal;
pll_ref_khz = (priv->cfg->xtal + 500) / 1000;
rc = r82xx_write_reg_mask(priv, 0x10, refdiv2, 0x10);
@ -471,11 +471,14 @@ static int r82xx_set_pll(struct r82xx_priv *priv, uint32_t freq)
if (rc < 0)
return rc;
if (priv->cfg->rafael_chip == CHIP_R828D)
vco_power_ref = 1;
vco_fine_tune = (data[4] & 0x30) >> 4;
if (vco_fine_tune > VCO_POWER_REF)
if (vco_fine_tune > vco_power_ref)
div_num = div_num - 1;
else if (vco_fine_tune < VCO_POWER_REF)
else if (vco_fine_tune < vco_power_ref)
div_num = div_num + 1;
rc = r82xx_write_reg_mask(priv, 0x10, div_num << 5, 0xe0);
@ -486,8 +489,8 @@ static int r82xx_set_pll(struct r82xx_priv *priv, uint32_t freq)
nint = vco_freq / (2 * pll_ref);
vco_fra = (vco_freq - 2 * pll_ref * nint) / 1000;
if (nint > 63) {
fprintf(stderr, "No valid PLL values for %u kHz!\n", freq);
if (nint > ((128 / vco_power_ref) - 1)) {
fprintf(stderr, "[R82XX] No valid PLL values for %u Hz!\n", freq);
return -EINVAL;
}
@ -545,6 +548,7 @@ static int r82xx_set_pll(struct r82xx_priv *priv, uint32_t freq)
}
if (!(data[2] & 0x40)) {
printf("[R82XX] PLL not locked!\n");
priv->has_lock = 0;
return 0;
}
@ -628,17 +632,6 @@ static int r82xx_sysfreq_sel(struct r82xx_priv *priv, uint32_t freq,
break;
}
if (priv->cfg->use_diplexer &&
((priv->cfg->rafael_chip == CHIP_R820T) ||
(priv->cfg->rafael_chip == CHIP_R828S) ||
(priv->cfg->rafael_chip == CHIP_R820C))) {
if (freq > DIP_FREQ)
air_cable1_in = 0x00;
else
air_cable1_in = 0x60;
cable2_in = 0x00;
}
if (priv->cfg->use_predetect) {
rc = r82xx_write_reg_mask(priv, 0x06, pre_dect, 0x40);
if (rc < 0)
@ -658,6 +651,8 @@ static int r82xx_sysfreq_sel(struct r82xx_priv *priv, uint32_t freq,
if (rc < 0)
return rc;
priv->input = air_cable1_in;
/* Air-IN only for Astrometa */
rc = r82xx_write_reg_mask(priv, 0x05, air_cable1_in, 0x60);
if (rc < 0)
@ -675,11 +670,6 @@ static int r82xx_sysfreq_sel(struct r82xx_priv *priv, uint32_t freq,
rc = r82xx_write_reg_mask(priv, 0x0a, filter_cur, 0x60);
if (rc < 0)
return rc;
/*
* Original driver initializes regs 0x05 and 0x06 with the
* same value again on this point. Probably, it is just an
* error there
*/
/*
* Set LNA
@ -1088,8 +1078,7 @@ int r82xx_set_freq(struct r82xx_priv *priv, uint32_t freq)
{
int rc = -EINVAL;
uint32_t lo_freq = freq + priv->int_freq;
lo_freq = freq + priv->int_freq;
uint8_t air_cable1_in;
rc = r82xx_set_mux(priv, lo_freq);
if (rc < 0)
@ -1099,6 +1088,18 @@ int r82xx_set_freq(struct r82xx_priv *priv, uint32_t freq)
if (rc < 0 || !priv->has_lock)
goto err;
/* switch between 'Cable1' and 'Air-In' inputs on sticks with
* R828D tuner. We switch at 345 MHz, because that's where the
* noise-floor has about the same level with identical LNA
* settings. The original driver used 320 MHz. */
air_cable1_in = (freq > MHZ(345)) ? 0x00 : 0x60;
if ((priv->cfg->rafael_chip == CHIP_R828D) &&
(air_cable1_in != priv->input)) {
priv->input = air_cable1_in;
rc = r82xx_write_reg_mask(priv, 0x05, air_cable1_in, 0x60);
}
err:
if (rc < 0)
fprintf(stderr, "%s: failed=%d\n", __func__, rc);
@ -1234,8 +1235,6 @@ int r82xx_init(struct r82xx_priv *priv)
goto err;
rc = r82xx_sysfreq_sel(priv, 0, TUNER_DIGITAL_TV, SYS_DVBT);
if (rc < 0)
goto err;
err:
if (rc < 0)

Write Preview
Loading…
Cancel
Save