Add option '-T' for activating bias-T in rtl_(adsb|fm|power|tcp)

* added debug output when activating
Signed-off-by: hayati ayguen <h_ayguen@web.de>
* fixed options argument
Signed-off-by: Fabian P. Schmidt <kerel-fs@gmx.de>
Signed-off-by: Steve Markgraf <steve@steve-m.de>

src/rtl_adsb.c

@@ -96,6 +96,7 @@ void usage(void)
 		"\t[-e allowed_errors (default: 5)]\n"
 		"\t[-g tuner_gain (default: automatic)]\n"
 		"\t[-p ppm_error (default: 0)]\n"
+		"\t[-T enable bias-T on GPIO PIN 0 (works for rtl-sdr.com v3 dongles)]\n"
 		"\tfilename (a '-' dumps samples to stdout)\n"
 		"\t (omitting the filename also uses stdout)\n\n"
 		"Streaming with netcat:\n"
@@ -371,11 +372,12 @@ int main(int argc, char **argv)
 	int dev_index = 0;
 	int dev_given = 0;
 	int ppm_error = 0;
+	int enable_biastee = 0;
 	pthread_cond_init(&ready, NULL);
 	pthread_mutex_init(&ready_m, NULL);
 	squares_precompute();
 
-	while ((opt = getopt(argc, argv, "d:g:p:e:Q:VS")) != -1)
+	while ((opt = getopt(argc, argv, "d:g:p:e:Q:VST")) != -1)
 	{
 		switch (opt) {
 		case 'd':
@@ -400,6 +402,9 @@ int main(int argc, char **argv)
 		case 'Q':
 			quality = (int)(atof(optarg) * 10);
 			break;
+		case 'T':
+			enable_biastee = 1;
+			break;
 		default:
 			usage();
 			return 0;
@@ -470,6 +475,10 @@ int main(int argc, char **argv)
 	/* Set the sample rate */
 	verbose_set_sample_rate(dev, ADSB_RATE);
 
+	rtlsdr_set_bias_tee(dev, enable_biastee);
+	if (enable_biastee)
+		fprintf(stderr, "activated bias-T on GPIO PIN 0\n");
+
 	/* Reset endpoint before we start reading from it (mandatory) */
 	verbose_reset_buffer(dev);
 

src/rtl_fm.c

@@ -193,6 +193,7 @@ void usage(void)
 		"\t    raw mode outputs 2x16 bit IQ pairs\n"
 		"\t[-s sample_rate (default: 24k)]\n"
 		"\t[-d device_index (default: 0)]\n"
+		"\t[-T enable bias-T on GPIO PIN 0 (works for rtl-sdr.com v3 dongles)]\n"
 		"\t[-g tuner_gain (default: automatic)]\n"
 		"\t[-l squelch_level (default: 0/off)]\n"
 		//"\t    for fm squelch is inverted\n"
@@ -1042,12 +1043,13 @@ int main(int argc, char **argv)
 	int r, opt;
 	int dev_given = 0;
 	int custom_ppm = 0;
+    int enable_biastee = 0;
 	dongle_init(&dongle);
 	demod_init(&demod);
 	output_init(&output);
 	controller_init(&controller);
 
-	while ((opt = getopt(argc, argv, "d:f:g:s:b:l:o:t:r:p:E:F:A:M:h")) != -1) {
+	while ((opt = getopt(argc, argv, "d:f:g:s:b:l:o:t:r:p:E:F:A:M:hT")) != -1) {
 		switch (opt) {
 		case 'd':
 			dongle.dev_index = verbose_device_search(optarg);
@@ -1142,6 +1144,9 @@ int main(int argc, char **argv)
 				demod.deemph = 1;
 				demod.squelch_level = 0;}
 			break;
+		case 'T':
+			enable_biastee = 1;
+			break;
 		case 'h':
 		default:
 			usage();
@@ -1205,6 +1210,10 @@ int main(int argc, char **argv)
 		verbose_gain_set(dongle.dev, dongle.gain);
 	}
 
+	rtlsdr_set_bias_tee(dongle.dev, enable_biastee);
+	if (enable_biastee)
+		fprintf(stderr, "activated bias-T on GPIO PIN 0\n");
+
 	verbose_ppm_set(dongle.dev, dongle.ppm_error);
 
 	if (strcmp(output.filename, "-") == 0) { /* Write samples to stdout */

src/rtl_power.c

@@ -133,6 +133,7 @@ void usage(void)
 		"\t[-d device_index (default: 0)]\n"
 		"\t[-g tuner_gain (default: automatic)]\n"
 		"\t[-p ppm_error (default: 0)]\n"
+		"\t[-T enable bias-T on GPIO PIN 0 (works for rtl-sdr.com v3 dongles)]\n"
 		"\tfilename (a '-' dumps samples to stdout)\n"
 		"\t (omitting the filename also uses stdout)\n"
 		"\n"
@@ -771,6 +772,7 @@ int main(int argc, char **argv)
 	int single = 0;
 	int direct_sampling = 0;
 	int offset_tuning = 0;
+	int enable_biastee = 0;
 	double crop = 0.0;
 	char *freq_optarg;
 	time_t next_tick;
@@ -781,7 +783,7 @@ int main(int argc, char **argv)
 	double (*window_fn)(int, int) = rectangle;
 	freq_optarg = "";
 
-	while ((opt = getopt(argc, argv, "f:i:s:t:d:g:p:e:w:c:F:1PDOh")) != -1) {
+	while ((opt = getopt(argc, argv, "f:i:s:t:d:g:p:e:w:c:F:1PDOhT")) != -1) {
 		switch (opt) {
 		case 'f': // lower:upper:bin_size
 			freq_optarg = strdup(optarg);
@@ -849,6 +851,9 @@ int main(int argc, char **argv)
 			boxcar = 0;
 			comp_fir_size = atoi(optarg);
 			break;
+		case 'T':
+			enable_biastee = 1;
+			break;
 		case 'h':
 		default:
 			usage();
@@ -925,6 +930,10 @@ int main(int argc, char **argv)
 
 	verbose_ppm_set(dev, ppm_error);
 
+	rtlsdr_set_bias_tee(dev, enable_biastee);
+	if (enable_biastee)
+		fprintf(stderr, "activated bias-T on GPIO PIN 0\n");
+
 	if (strcmp(filename, "-") == 0) { /* Write log to stdout */
 		file = stdout;
 #ifdef _WIN32

src/rtl_tcp.c

@@ -78,6 +78,7 @@ typedef struct { /* structure size must be multiple of 2 bytes */
 
 static rtlsdr_dev_t *dev = NULL;
 
+static int enable_biastee = 0;
 static int global_numq = 0;
 static struct llist *ll_buffers = 0;
 static int llbuf_num = 500;
@@ -95,7 +96,8 @@ void usage(void)
 		"\t[-b number of buffers (default: 15, set by library)]\n"
 		"\t[-n max number of linked list buffers to keep (default: 500)]\n"
 		"\t[-d device index (default: 0)]\n"
-		"\t[-P ppm_error (default: 0)]\n");
+		"\t[-P ppm_error (default: 0)]\n"
+		"\t[-T enable bias-T on GPIO PIN 0 (works for rtl-sdr.com v3 dongles)]\n");
 	exit(1);
 }
 
@@ -395,7 +397,7 @@ int main(int argc, char **argv)
 	struct sigaction sigact, sigign;
 #endif
 
-	while ((opt = getopt(argc, argv, "a:p:f:g:s:b:n:d:P:")) != -1) {
+	while ((opt = getopt(argc, argv, "a:p:f:g:s:b:n:d:P:T")) != -1) {
 		switch (opt) {
 		case 'd':
 			dev_index = verbose_device_search(optarg);
@@ -425,6 +427,9 @@ int main(int argc, char **argv)
 		case 'P':
 			ppm_error = atoi(optarg);
 			break;
+		case 'T':
+			enable_biastee = 1;
+			break;
 		default:
 			usage();
 			break;
@@ -495,6 +500,10 @@ int main(int argc, char **argv)
 			fprintf(stderr, "Tuner gain set to %f dB.\n", gain/10.0);
 	}
 
+	rtlsdr_set_bias_tee(dev, enable_biastee);
+	if (enable_biastee)
+		fprintf(stderr, "activated bias-T on GPIO PIN 0\n");
+
 	/* Reset endpoint before we start reading from it (mandatory) */
 	r = rtlsdr_reset_buffer(dev);
 	if (r < 0)