improved the readme

README.md

@@ -1,26 +1,23 @@
 # TinyFrame
 
 TinyFrame is a simple library for building and parsing data frames to be sent 
-over a serial interface (e.g. UART, telnet etc.). The code is written to build with 
+over a serial interface (e.g. UART, telnet, socket). The code is written to build with 
-`--std=gnu89` and later.
+`--std=gnu99` and mostly compatible with `--std=gnu89`.
+
+The library provides a high level interface for passing messages between the two peers.
+Multi-message sessions, response listeners, checksums, timeouts are all handled by the library.
 
 TinyFrame is suitable for a wide range of applications, including inter-microcontroller 
 communication, as a protocol for FTDI-based PC applications or for messaging through
-UDP packets. If you find a good use for it, please let me know so I can add it here!
+UDP packets.
-
-Frames can be protected by a checksum (~XOR, CRC16 or CRC32) and contain 
-a unique ID field which can be used for chaining related messages. The highest bit 
-of the generated frame IDs is different in each peer to avoid collisions.
-Peers are functionally equivalent and can send messages to each other 
-(the names "master" and "slave" are used only for convenience).
 
 The library lets you register listeners (callback functions) to wait for (1) any frame, (2)
-a particular frame Type, or (3) a specific message ID. This high-level API lets the user 
+a particular frame Type, or (3) a specific message ID. This high-level API is general 
-easily implement various async communication patterns.
+enough to implement most communication patterns.
 
 TinyFrame is re-entrant and supports creating multiple instances with the limitation
-that their structure (field sizes and checksum type) must be the same. There is a support
+that their structure (field sizes and checksum type) is the same. There is a support
-for adding multi-threaded access to a shared instance using a mutex (via a callback stub).
+for adding multi-threaded access to a shared instance using a mutex.
 
 TinyFrame also comes with (optional) helper functions for building and parsing message
 payloads, those are provided in the `utils/` folder.
@@ -34,18 +31,30 @@ TinyFrame has been ported to mutiple languages:
 - Rust port - [cpsdqs/tinyframe-rs](https://github.com/cpsdqs/tinyframe-rs)
 - JavaScript port - [cpsdqs/tinyframe-js](https://github.com/cpsdqs/tinyframe-js)
 
-Please note most of the ports are experimental and may exhibit various bugs or missing features. Testers are welcome :)
+Please note most of the ports are experimental and may exhibit various bugs or missing 
+features. Testers are welcome :)
+
+## Functional overview
+
+The basic functionality of TinyFrame is explained here. For particlars, such as the
+API function, it's recommended to read the doc comments in the header file.
 
-## Frame structure
+### Structure of a frame
 
-All fields in the message frame have a configurable size (see the top of the header file).
+Each frame consists of a header and a payload. Both parts can be protected by a checksum, 
-By just changing a definition in the header, such as `TF_LEN_BYTES` (1, 2 or 4), the library
+ensuring a frame with a malformed header (e.g. with a corrupted length field) or a corrupted
-seamlessly switches between `uint8_t`, `uint16_t` and `uint32_t`. Choose field lengths that
+payload is rejected.
-best suit your application needs. 
 
-For example, you don't need 4 bytes (`uint32_t`) for the 
+The frame header contains a frame ID and a message type. Frame ID is incremented with each
-length field if your payloads are 20 bytes long, using a 1-byte field (`uint8_t`) will save
+new message. The highest bit of the ID field is fixed to 1 and 0 for the two peers, 
-3 bytes. This may be significant if you need high throughput.
+avoiding a conflict.
+
+Frame ID can be re-used in a response to tie the two messages together. Values of the
+type field are user defined.
+
+All fields in the frame have a configurable size. By changing a field in the config 
+file, such as `TF_LEN_BYTES` (1, 2 or 4), the library seamlessly switches between `uint8_t`,
+`uint16_t` and `uint32_t` for all functions working with the field. 
 
 ```
 ,-----+-----+-----+------+------------+- - - -+-------------,
@@ -59,17 +68,69 @@ LEN ......... number of data bytes in the frame
 TYPE ........ message type (used to run Type Listeners, pick any values you like)
 HEAD_CKSUM .. header checksum
 
-DATA ........ LEN bytes of data (can be 0, in which case DATA_CKSUM is omitted as well)
+DATA ........ LEN bytes of data
-DATA_CKSUM .. data checksum
+DATA_CKSUM .. data checksum (left out if LEN is 0)
 ```
 
+### Message listeners
+
+TinyFrame is based on the concept of message listeners. A listener is a callback function 
+waiting for a particular message Type or ID to be received.
+
+There are 3 listener types, in the order of precedence:
+ 
+- **ID listeners** - waiting for a response
+- **Type listeners** - waiting for a message of the given Type field
+- **Generic listeners** - fallback
+
+ID listeners can be registered automatically when sending a message. All listeners can 
+also be registered and removed manually. 
+
+ID listeners are used to receive the response to a request. When registerign an ID 
+listener, it's possible to attach custom user data to it that will be made available to 
+the listener callback. This data (`void *`) can be any kind of application context 
+variable.
+
+ID listeners can be assigned a timeout. When a listener expires, before it's removed,
+the callback is fired with NULL payload data in order to let the user `free()` any
+attached userdata. This happens only if the userdata is not NULL.
+
+Listener callbacks return values of the `TF_Result` enum:
+
+- `TF_CLOSE` - message accepted, remove the listener
+- `TF_STAY` - message accepted, stay registered
+- `TF_RENEW` - sameas `TF_STAY`, but the ID listener's timeout is renewed
+- `TF_NEXT` - message NOT accepted, keep the listener and pass the message to the next 
+              listener capable of handling it.
+
+### Data buffers, multi-part frames
+
+TinyFrame uses two data buffers: a small transmit buffer and a larger receive buffer.
+The transmit buffer is used to prepare bytes to send, either all at once, or in a 
+circular fashion if the buffer is not large enough. The buffer must be large enough to 
+contain the frame header, so e.g. 32 bytes should be sufficient for short messages.
+
+Using the `*_Multipart()` sending functions, it's further possible to split the frame 
+header and payload to multiple function calls, allowing the applciation to e.g. generate
+the payload on-the-fly.
+
+In contrast to the transmit buffer, the receive buffer must be large enough to contain 
+an entire frame. This is because the final checksum must be verified before the frame 
+is handled.
+ 
+If frames larger than the possible receive buffer size are required (e.g. in embedded 
+systems with small RAM), it's recommended to implement a multi-message transport mechanism
+at a higher level and send the data in chunks.
+
 ## Usage Hints
 
 - All TinyFrame functions, typedefs and macros start with the `TF_` prefix.
-- Both peers must include the library with the same parameters (configured at the top of the header file)
+- Both peers must include the library with the same config parameters
+- See `TF_Integration.example.c` and `TF_Config.example.c` for reference how to configure and integrate the library.
+- DO NOT modify the library files, if possible. This makes it easy to upgrade.
 - Start by calling `TF_Init()` with `TF_MASTER` or `TF_SLAVE` as the argument. This creates a handle.
-  Use `TF_InitStatic()` to avoid the use of malloc(). If multiple instances are used, you can tag them 
+  Use `TF_InitStatic()` to avoid the use of malloc(). 
-  using the `tf.userdata` / `tf.usertag` field.
+- If multiple instances are used, you can tag them using the `tf.userdata` / `tf.usertag` field.
 - Implement `TF_WriteImpl()` - declared at the bottom of the header file as `extern`.
   This function is used by `TF_Send()` and others to write bytes to your UART (or other physical layer).
   A frame can be sent in it's entirety, or in multiple parts, depending on its size.
@@ -78,25 +139,30 @@ DATA_CKSUM .. data checksum
   in a bad state (such as receiving a partial frame) and can also time-out ID listeners.
 - Bind Type or Generic listeners using `TF_AddTypeListener()` or `TF_AddGenericListener()`.
 - Send a message using `TF_Send()`, `TF_Query()`, `TF_SendSimple()`, `TF_QuerySimple()`.
-  Query functions take a listener callback (function pointer)that will be added as 
+  Query functions take a listener callback (function pointer) that will be added as 
   an ID listener and wait for a response.
+- Use the `*_Multipart()` variant of the above sending functions for payloads generated in
+  multiple function calls. The payload is sent afterwards by calling `TF_Multipart_Payload()`
+  and the frame is closed by `TF_Multipart_Close()`.
+- If custom checksum implementation is needed, select `TF_CKSUM_CUSTOM8`, 16 or 32 and 
+  implement the three checksum functions.
 - To reply to a message (when your listener gets called), use `TF_Respond()`
-  with the msg boject you received, replacing the `data` pointer (and `len`) with response.
+  with the msg object you received, replacing the `data` pointer (and `len`) with a response.
-- Manually reset the parser using `TF_ResetParser()`
+- At any time you can manually reset the message parser using `TF_ResetParser()`. It can also 
-
+  be reset automatically after a timeout configured in the config file.
-### Message listeners
+
-
+### Gotchas to look out for
-Listeners are callback functions that are called by TinyFrame when a message which 
+
-they can handle is received.
+- If any userdata is attached to an ID listener with a timeout, when the listener times out,
-
+  it will be called with NULL `msg->data` to let the user free the userdata. Therefore 
-There are 3 listener types:
+  it's needed to check `msg->data` before proceeding to handle the message.
- 
+- If a multi-part frame is being sent, the Tx part of the library is locked to prevent 
-- ID listeners
+  concurrent access. The frame must be fully sent and closed before attempting to send
-- Type listeners
+  anything else. 
-- Generic listeners
+- If multiple threads are used, don't forget to implement the mutex callbacks to avoid 
-
+  concurrent access to the Tx functions. The default implementation is not entirely thread
-Listeners return an enum constant based on what should be done next - remove the listener, 
+  safe, as it can't rely on platform-specific resources like mutexes or atomic access. 
-keep it, renew it's timeout, or let some other listener handle the message.
+  Set `TF_USE_MUTEX` to `1` in the config file.
 
 ### Examples
 

TinyFrame.c

@@ -269,7 +269,7 @@ static void _TF_FN cleanup_id_listener(TinyFrame *tf, TF_COUNT i, struct TF_IdLi
     if (lst->fn == NULL) return;
 
     // Make user clean up their data - only if not NULL
-    if (lst->userdata != NULL) {
+    if (lst->userdata != NULL || lst->userdata2 != NULL) {
         msg.userdata = lst->userdata;
         msg.userdata2 = lst->userdata2;
         msg.data = NULL; // this is a signal that the listener should clean up