You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
48 lines
2.9 KiB
48 lines
2.9 KiB
\chapter{Summary}
|
|
|
|
We developed an open source software and hardware platform providing access to hardware buses (SPI, \IIC, USART, and 1-Wire) and low-level circuitry from high-level user applications running on a \gls{PC}. The platform consists of a firmware for the STM32F072 microcontroller, three hardware prototypes, and software libraries in programming languages C and Python, the latter also compatible with MATLAB. The firmware may be used with the custom hardware or STM32 development boards.
|
|
|
|
The devices are connected to the \gls{PC} by one of three interfaces: \gls{USB} as a virtual COM port or using raw endpoint access, a hardware \gls{UART}, or a radio link with the nRF24L01+ transceiver.
|
|
|
|
The firmware is configured by editing INI files exposed in a virtual file system through a \gls{USB} connection, or programmatically via the communication interface. The configuration may be stored permanently in the \gls{MCU}'s flash memory, or temporarily in its \gls{RAM}.
|
|
|
|
\noindent
|
|
The following features are available, implemented as independent functional blocks that can be used in one or more instances:
|
|
|
|
\begin{itemize}[itemsep=1pt]
|
|
\item \textbf{Digital input} with asynchronous pin change detection
|
|
\item \textbf{Digital output}
|
|
\begin{itemize}
|
|
\item Simultaneous update of up to 16 output pins
|
|
\item Pulse generation on any pin, with microsecond or millisecond resolution
|
|
\end{itemize}
|
|
\item \textbf{Digital communication interfaces:}
|
|
\begin{itemize}
|
|
\item \textbf{\gls{SPI}} with up to 16 slaves and multicast support
|
|
\item \textbf{\gls{I2C}} master
|
|
\item \textbf{\gls{USART}} with optional RS-485 driver support
|
|
\item \textbf{1-Wire} master implementing the \gls{ROM} Search algorithm
|
|
\end{itemize}
|
|
\item \textbf{Analog signal acquisition}
|
|
\begin{itemize}
|
|
\item Immediate or averaged voltage measurement
|
|
\item Isochronous sampling: fixed sample count, or a continuous stream
|
|
\item Threshold-based triggering with a pre-trigger buffer
|
|
\end{itemize}
|
|
\item \textbf{Analog signal output}
|
|
\begin{itemize}
|
|
\item Sine, triangle, sawtooth, or rectangle waveform generation using \gls{DDS}
|
|
\item \gls{DC} level output
|
|
\item Optional dithering with a noise signal
|
|
\end{itemize}
|
|
\item \textbf{Frequency, pulse width, and duty cycle measurement}
|
|
\item \textbf{Pulse counting}
|
|
\item \textbf{\gls{PWM} signal generation}
|
|
\item \textbf{NeoPixel RGB \gls{LED} strip control}
|
|
\item \textbf{Multi-channel shift register loading}
|
|
\item \textbf{Capacitive touch sensing}
|
|
\end{itemize}
|
|
|
|
The developed platform may be used as an learning aid, as an inexpensive development tool replacing professional laboratory equipment, or for automation purposes, taking advantage of its hardware interfacing capabilities with a control program running on a PC.
|
|
|
|
Future development shall focus on expanding support to other hardware platforms, improving the software library, and adding support to other programming languages.
|
|
|