You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
473 lines
19 KiB
473 lines
19 KiB
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal_dma.h
|
|
* @author MCD Application Team
|
|
* @brief Header file of DMA HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F1xx_HAL_DMA_H
|
|
#define __STM32F1xx_HAL_DMA_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup DMA
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
|
|
/** @defgroup DMA_Exported_Types DMA Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief DMA Configuration Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
|
|
from memory to memory or from peripheral to memory.
|
|
This parameter can be a value of @ref DMA_Data_transfer_direction */
|
|
|
|
uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
|
|
This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
|
|
|
|
uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
|
|
This parameter can be a value of @ref DMA_Memory_incremented_mode */
|
|
|
|
uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
|
|
This parameter can be a value of @ref DMA_Peripheral_data_size */
|
|
|
|
uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
|
|
This parameter can be a value of @ref DMA_Memory_data_size */
|
|
|
|
uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
|
|
This parameter can be a value of @ref DMA_mode
|
|
@note The circular buffer mode cannot be used if the memory-to-memory
|
|
data transfer is configured on the selected Channel */
|
|
|
|
uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
|
|
This parameter can be a value of @ref DMA_Priority_level */
|
|
} DMA_InitTypeDef;
|
|
|
|
/**
|
|
* @brief HAL DMA State structures definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
|
|
HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
|
|
HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
|
|
HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */
|
|
}HAL_DMA_StateTypeDef;
|
|
|
|
/**
|
|
* @brief HAL DMA Error Code structure definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
|
|
HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */
|
|
}HAL_DMA_LevelCompleteTypeDef;
|
|
|
|
/**
|
|
* @brief HAL DMA Callback ID structure definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
|
|
HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */
|
|
HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */
|
|
HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */
|
|
HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */
|
|
|
|
}HAL_DMA_CallbackIDTypeDef;
|
|
|
|
/**
|
|
* @brief DMA handle Structure definition
|
|
*/
|
|
typedef struct __DMA_HandleTypeDef
|
|
{
|
|
DMA_Channel_TypeDef *Instance; /*!< Register base address */
|
|
|
|
DMA_InitTypeDef Init; /*!< DMA communication parameters */
|
|
|
|
HAL_LockTypeDef Lock; /*!< DMA locking object */
|
|
|
|
HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
|
|
|
|
void *Parent; /*!< Parent object state */
|
|
|
|
void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
|
|
|
|
void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
|
|
|
|
void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
|
|
|
|
void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */
|
|
|
|
__IO uint32_t ErrorCode; /*!< DMA Error code */
|
|
|
|
DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */
|
|
|
|
uint32_t ChannelIndex; /*!< DMA Channel Index */
|
|
|
|
} DMA_HandleTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
|
|
/** @defgroup DMA_Exported_Constants DMA Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup DMA_Error_Code DMA Error Code
|
|
* @{
|
|
*/
|
|
#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */
|
|
#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */
|
|
#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< no ongoing transfer */
|
|
#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
|
|
#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
|
|
* @{
|
|
*/
|
|
#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
|
|
#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */
|
|
#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
|
|
* @{
|
|
*/
|
|
#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */
|
|
#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode Disable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
|
|
* @{
|
|
*/
|
|
#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */
|
|
#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode Disable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
|
|
* @{
|
|
*/
|
|
#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */
|
|
#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */
|
|
#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment: Word */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DMA_Memory_data_size DMA Memory data size
|
|
* @{
|
|
*/
|
|
#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */
|
|
#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment: HalfWord */
|
|
#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment: Word */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DMA_mode DMA mode
|
|
* @{
|
|
*/
|
|
#define DMA_NORMAL 0x00000000U /*!< Normal mode */
|
|
#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular mode */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DMA_Priority_level DMA Priority level
|
|
* @{
|
|
*/
|
|
#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */
|
|
#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */
|
|
#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */
|
|
#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
|
|
* @{
|
|
*/
|
|
#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE)
|
|
#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE)
|
|
#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DMA_flag_definitions DMA flag definitions
|
|
* @{
|
|
*/
|
|
#define DMA_FLAG_GL1 0x00000001U
|
|
#define DMA_FLAG_TC1 0x00000002U
|
|
#define DMA_FLAG_HT1 0x00000004U
|
|
#define DMA_FLAG_TE1 0x00000008U
|
|
#define DMA_FLAG_GL2 0x00000010U
|
|
#define DMA_FLAG_TC2 0x00000020U
|
|
#define DMA_FLAG_HT2 0x00000040U
|
|
#define DMA_FLAG_TE2 0x00000080U
|
|
#define DMA_FLAG_GL3 0x00000100U
|
|
#define DMA_FLAG_TC3 0x00000200U
|
|
#define DMA_FLAG_HT3 0x00000400U
|
|
#define DMA_FLAG_TE3 0x00000800U
|
|
#define DMA_FLAG_GL4 0x00001000U
|
|
#define DMA_FLAG_TC4 0x00002000U
|
|
#define DMA_FLAG_HT4 0x00004000U
|
|
#define DMA_FLAG_TE4 0x00008000U
|
|
#define DMA_FLAG_GL5 0x00010000U
|
|
#define DMA_FLAG_TC5 0x00020000U
|
|
#define DMA_FLAG_HT5 0x00040000U
|
|
#define DMA_FLAG_TE5 0x00080000U
|
|
#define DMA_FLAG_GL6 0x00100000U
|
|
#define DMA_FLAG_TC6 0x00200000U
|
|
#define DMA_FLAG_HT6 0x00400000U
|
|
#define DMA_FLAG_TE6 0x00800000U
|
|
#define DMA_FLAG_GL7 0x01000000U
|
|
#define DMA_FLAG_TC7 0x02000000U
|
|
#define DMA_FLAG_HT7 0x04000000U
|
|
#define DMA_FLAG_TE7 0x08000000U
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Exported macros -----------------------------------------------------------*/
|
|
/** @defgroup DMA_Exported_Macros DMA Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Reset DMA handle state.
|
|
* @param __HANDLE__: DMA handle
|
|
* @retval None
|
|
*/
|
|
#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
|
|
|
|
/**
|
|
* @brief Enable the specified DMA Channel.
|
|
* @param __HANDLE__: DMA handle
|
|
* @retval None
|
|
*/
|
|
#define __HAL_DMA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
|
|
|
|
/**
|
|
* @brief Disable the specified DMA Channel.
|
|
* @param __HANDLE__: DMA handle
|
|
* @retval None
|
|
*/
|
|
#define __HAL_DMA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
|
|
|
|
|
|
/* Interrupt & Flag management */
|
|
|
|
/**
|
|
* @brief Enables the specified DMA Channel interrupts.
|
|
* @param __HANDLE__: DMA handle
|
|
* @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg DMA_IT_TC: Transfer complete interrupt mask
|
|
* @arg DMA_IT_HT: Half transfer complete interrupt mask
|
|
* @arg DMA_IT_TE: Transfer error interrupt mask
|
|
* @retval None
|
|
*/
|
|
#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__)))
|
|
|
|
/**
|
|
* @brief Disable the specified DMA Channel interrupts.
|
|
* @param __HANDLE__: DMA handle
|
|
* @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg DMA_IT_TC: Transfer complete interrupt mask
|
|
* @arg DMA_IT_HT: Half transfer complete interrupt mask
|
|
* @arg DMA_IT_TE: Transfer error interrupt mask
|
|
* @retval None
|
|
*/
|
|
#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__)))
|
|
|
|
/**
|
|
* @brief Check whether the specified DMA Channel interrupt is enabled or not.
|
|
* @param __HANDLE__: DMA handle
|
|
* @param __INTERRUPT__: specifies the DMA interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg DMA_IT_TC: Transfer complete interrupt mask
|
|
* @arg DMA_IT_HT: Half transfer complete interrupt mask
|
|
* @arg DMA_IT_TE: Transfer error interrupt mask
|
|
* @retval The state of DMA_IT (SET or RESET).
|
|
*/
|
|
#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
|
|
|
/**
|
|
* @brief Return the number of remaining data units in the current DMA Channel transfer.
|
|
* @param __HANDLE__: DMA handle
|
|
* @retval The number of remaining data units in the current DMA Channel transfer.
|
|
*/
|
|
#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Include DMA HAL Extension module */
|
|
#include "stm32f1xx_hal_dma_ex.h"
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup DMA_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup DMA_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
/* Initialization and de-initialization functions *****************************/
|
|
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
|
|
HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup DMA_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
/* IO operation functions *****************************************************/
|
|
HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
|
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
|
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
|
|
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
|
|
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
|
|
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
|
|
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma));
|
|
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup DMA_Exported_Functions_Group3
|
|
* @{
|
|
*/
|
|
/* Peripheral State and Error functions ***************************************/
|
|
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
|
|
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup DMA_Private_Macros DMA Private Macros
|
|
* @{
|
|
*/
|
|
|
|
#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
|
|
((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
|
|
((DIRECTION) == DMA_MEMORY_TO_MEMORY))
|
|
|
|
#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U))
|
|
|
|
#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
|
|
((STATE) == DMA_PINC_DISABLE))
|
|
|
|
#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
|
|
((STATE) == DMA_MINC_DISABLE))
|
|
|
|
#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
|
|
((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
|
|
((SIZE) == DMA_PDATAALIGN_WORD))
|
|
|
|
#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
|
|
((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
|
|
((SIZE) == DMA_MDATAALIGN_WORD ))
|
|
|
|
#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
|
|
((MODE) == DMA_CIRCULAR))
|
|
|
|
#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
|
|
((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
|
|
((PRIORITY) == DMA_PRIORITY_HIGH) || \
|
|
((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F1xx_HAL_DMA_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|