The nRF24L01+ wireless dongle firmware
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
gex-nrf-dongle/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h

428 lines
16 KiB

/**
******************************************************************************
* @file stm32f1xx_hal_rtc_ex.h
* @author MCD Application Team
* @brief Header file of RTC HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_RTC_EX_H
#define __STM32F1xx_HAL_RTC_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup RTCEx
* @{
*/
/** @addtogroup RTCEx_Private_Macros
* @{
*/
/** @defgroup RTCEx_Alias_For_Legacy Alias define maintained for legacy
* @{
*/
#define HAL_RTCEx_TamperTimeStampIRQHandler HAL_RTCEx_TamperIRQHandler
/**
* @}
*/
/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
* @{
*/
#define IS_RTC_TAMPER(__TAMPER__) ((__TAMPER__) == RTC_TAMPER_1)
#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL))
#if RTC_BKP_NUMBER > 10U
#define IS_RTC_BKP(BKP) (((BKP) <= (uint32_t)RTC_BKP_DR10) || (((BKP) >= (uint32_t)RTC_BKP_DR11) && ((BKP) <= (uint32_t)RTC_BKP_DR42)))
#else
#define IS_RTC_BKP(BKP) ((BKP) <= (uint32_t)RTC_BKP_NUMBER)
#endif
#define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x0000007FU)
/**
* @}
*/
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
* @{
*/
/**
* @brief RTC Tamper structure definition
*/
typedef struct
{
uint32_t Tamper; /*!< Specifies the Tamper Pin.
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
uint32_t Trigger; /*!< Specifies the Tamper Trigger.
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
}RTC_TamperTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
* @{
*/
/** @defgroup RTCEx_Tamper_Pins_Definitions Tamper Pins Definitions
* @{
*/
#define RTC_TAMPER_1 BKP_CR_TPE /*!< Select tamper to be enabled (mainly for legacy purposes) */
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Trigger_Definitions Tamper Trigger Definitions
* @{
*/
#define RTC_TAMPERTRIGGER_LOWLEVEL BKP_CR_TPAL /*!< A high level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
#define RTC_TAMPERTRIGGER_HIGHLEVEL 0x00000000U /*!< A low level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
/**
* @}
*/
/** @defgroup RTCEx_Backup_Registers_Definitions Backup Registers Definitions
* @{
*/
#if RTC_BKP_NUMBER > 0U
#define RTC_BKP_DR1 0x00000001U
#define RTC_BKP_DR2 0x00000002U
#define RTC_BKP_DR3 0x00000003U
#define RTC_BKP_DR4 0x00000004U
#define RTC_BKP_DR5 0x00000005U
#define RTC_BKP_DR6 0x00000006U
#define RTC_BKP_DR7 0x00000007U
#define RTC_BKP_DR8 0x00000008U
#define RTC_BKP_DR9 0x00000009U
#define RTC_BKP_DR10 0x0000000AU
#endif /* RTC_BKP_NUMBER > 0 */
#if RTC_BKP_NUMBER > 10U
#define RTC_BKP_DR11 0x00000010U
#define RTC_BKP_DR12 0x00000011U
#define RTC_BKP_DR13 0x00000012U
#define RTC_BKP_DR14 0x00000013U
#define RTC_BKP_DR15 0x00000014U
#define RTC_BKP_DR16 0x00000015U
#define RTC_BKP_DR17 0x00000016U
#define RTC_BKP_DR18 0x00000017U
#define RTC_BKP_DR19 0x00000018U
#define RTC_BKP_DR20 0x00000019U
#define RTC_BKP_DR21 0x0000001AU
#define RTC_BKP_DR22 0x0000001BU
#define RTC_BKP_DR23 0x0000001CU
#define RTC_BKP_DR24 0x0000001DU
#define RTC_BKP_DR25 0x0000001EU
#define RTC_BKP_DR26 0x0000001FU
#define RTC_BKP_DR27 0x00000020U
#define RTC_BKP_DR28 0x00000021U
#define RTC_BKP_DR29 0x00000022U
#define RTC_BKP_DR30 0x00000023U
#define RTC_BKP_DR31 0x00000024U
#define RTC_BKP_DR32 0x00000025U
#define RTC_BKP_DR33 0x00000026U
#define RTC_BKP_DR34 0x00000027U
#define RTC_BKP_DR35 0x00000028U
#define RTC_BKP_DR36 0x00000029U
#define RTC_BKP_DR37 0x0000002AU
#define RTC_BKP_DR38 0x0000002BU
#define RTC_BKP_DR39 0x0000002CU
#define RTC_BKP_DR40 0x0000002DU
#define RTC_BKP_DR41 0x0000002EU
#define RTC_BKP_DR42 0x0000002FU
#endif /* RTC_BKP_NUMBER > 10 */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
* @{
*/
/**
* @brief Enable the RTC Tamper interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP1: Tamper A interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT(BKP->CSR, (__INTERRUPT__))
/**
* @brief Disable the RTC Tamper interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP1: Tamper A interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT(BKP->CSR, (__INTERRUPT__))
/**
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.
* This parameter can be:
* @arg RTC_IT_TAMP1
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & ((__INTERRUPT__))) != RESET)? SET : RESET)
/**
* @brief Get the selected RTC Tamper's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_TAMP1F
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) ((((BKP->CSR) & (__FLAG__)) != RESET)? SET : RESET)
/**
* @brief Get the selected RTC Tamper's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.
* This parameter can be:
* @arg RTC_IT_TAMP1
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & (BKP_CSR_TEF)) != RESET)? SET : RESET)
/**
* @brief Clear the RTC Tamper's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_TAMP1F
* @retval None
*/
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT(BKP->CSR, BKP_CSR_CTE | BKP_CSR_CTI)
/**
* @brief Enable the RTC Second interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled
* This parameter can be any combination of the following values:
* @arg RTC_IT_SEC: Second A interrupt
* @retval None
*/
#define __HAL_RTC_SECOND_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
/**
* @brief Disable the RTC Second interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Second interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_SEC: Second A interrupt
* @retval None
*/
#define __HAL_RTC_SECOND_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
/**
* @brief Check whether the specified RTC Second interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_IT_SEC: Second A interrupt
* @retval None
*/
#define __HAL_RTC_SECOND_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET)
/**
* @brief Get the selected RTC Second's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_SEC
* @retval None
*/
#define __HAL_RTC_SECOND_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
/**
* @brief Clear the RTC Second's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_SEC
* @retval None
*/
#define __HAL_RTC_SECOND_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)
/**
* @brief Enable the RTC Overflow interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled
* This parameter can be any combination of the following values:
* @arg RTC_IT_OW: Overflow A interrupt
* @retval None
*/
#define __HAL_RTC_OVERFLOW_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
/**
* @brief Disable the RTC Overflow interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_OW: Overflow A interrupt
* @retval None
*/
#define __HAL_RTC_OVERFLOW_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
/**
* @brief Check whether the specified RTC Overflow interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_IT_OW: Overflow A interrupt
* @retval None
*/
#define __HAL_RTC_OVERFLOW_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__))) ) != RESET)? SET : RESET)
/**
* @brief Get the selected RTC Overflow's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_OW
* @retval None
*/
#define __HAL_RTC_OVERFLOW_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
/**
* @brief Clear the RTC Overflow's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_OW
* @retval None
*/
#define __HAL_RTC_OVERFLOW_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup RTCEx_Exported_Functions
* @{
*/
/* RTC Tamper functions *****************************************/
/** @addtogroup RTCEx_Exported_Functions_Group1
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
/**
* @}
*/
/* RTC Second functions *****************************************/
/** @addtogroup RTCEx_Exported_Functions_Group2
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef* hrtc);
void HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
/* Extension Control functions ************************************************/
/** @addtogroup RTCEx_Exported_Functions_Group3
* @{
*/
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_RTC_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/