You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
727 lines
47 KiB
727 lines
47 KiB
7 years ago
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file stm32f1xx_hal_adc_ex.h
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @brief Header file of ADC HAL extension module.
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
|
* and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||
|
|
* may be used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||
|
|
#ifndef __STM32F1xx_HAL_ADC_EX_H
|
||
|
|
#define __STM32F1xx_HAL_ADC_EX_H
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32f1xx_hal_def.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup ADCEx
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported types ------------------------------------------------------------*/
|
||
|
|
/** @defgroup ADCEx_Exported_Types ADCEx Exported Types
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief ADC Configuration injected Channel structure definition
|
||
|
|
* @note Parameters of this structure are shared within 2 scopes:
|
||
|
|
* - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
|
||
|
|
* - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
|
||
|
|
* AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
|
||
|
|
* @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
|
||
|
|
* ADC state can be either:
|
||
|
|
* - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ExternalTrigInjecConv')
|
||
|
|
* - For all except parameters 'ExternalTrigInjecConv': ADC enabled without conversion on going on injected group.
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
uint32_t InjectedChannel; /*!< Selection of ADC channel to configure
|
||
|
|
This parameter can be a value of @ref ADC_channels
|
||
|
|
Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability.
|
||
|
|
Note: On STM32F1 devices with several ADC: Only ADC1 can access internal measurement channels (VrefInt/TempSensor)
|
||
|
|
Note: On STM32F10xx8 and STM32F10xxB devices: A low-amplitude voltage glitch may be generated (on ADC input 0) on the PA0 pin, when the ADC is converting with injection trigger.
|
||
|
|
It is advised to distribute the analog channels so that Channel 0 is configured as an injected channel.
|
||
|
|
Refer to errata sheet of these devices for more details. */
|
||
|
|
uint32_t InjectedRank; /*!< Rank in the injected group sequencer
|
||
|
|
This parameter must be a value of @ref ADCEx_injected_rank
|
||
|
|
Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
|
||
|
|
uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel.
|
||
|
|
Unit: ADC clock cycles
|
||
|
|
Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits).
|
||
|
|
This parameter can be a value of @ref ADC_sampling_times
|
||
|
|
Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
|
||
|
|
If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
|
||
|
|
Note: In case of usage of internal measurement channels (VrefInt/TempSensor),
|
||
|
|
sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
|
||
|
|
Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 5us to 17.1us min). */
|
||
|
|
uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
|
||
|
|
Offset value must be a positive number.
|
||
|
|
Depending of ADC resolution selected (12, 10, 8 or 6 bits),
|
||
|
|
this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
|
||
|
|
uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
|
||
|
|
To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
|
||
|
|
This parameter must be a number between Min_Data = 1 and Max_Data = 4.
|
||
|
|
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
||
|
|
configure a channel on injected group can impact the configuration of other channels previously set. */
|
||
|
|
uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
|
||
|
|
Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
|
||
|
|
Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
|
||
|
|
This parameter can be set to ENABLE or DISABLE.
|
||
|
|
Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
|
||
|
|
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
||
|
|
configure a channel on injected group can impact the configuration of other channels previously set. */
|
||
|
|
uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
|
||
|
|
This parameter can be set to ENABLE or DISABLE.
|
||
|
|
Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
|
||
|
|
Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
|
||
|
|
Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
|
||
|
|
To maintain JAUTO always enabled, DMA must be configured in circular mode.
|
||
|
|
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
||
|
|
configure a channel on injected group can impact the configuration of other channels previously set. */
|
||
|
|
uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
|
||
|
|
If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
|
||
|
|
If set to external trigger source, triggering is on event rising edge.
|
||
|
|
This parameter can be a value of @ref ADCEx_External_trigger_source_Injected
|
||
|
|
Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
|
||
|
|
If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
|
||
|
|
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
||
|
|
configure a channel on injected group can impact the configuration of other channels previously set. */
|
||
|
|
}ADC_InjectionConfTypeDef;
|
||
|
|
|
||
|
|
#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
/**
|
||
|
|
* @brief Structure definition of ADC multimode
|
||
|
|
* @note The setting of these parameters with function HAL_ADCEx_MultiModeConfigChannel() is conditioned to ADCs state (both ADCs of the common group).
|
||
|
|
* State of ADCs of the common group must be: disabled.
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode.
|
||
|
|
This parameter can be a value of @ref ADCEx_Common_mode
|
||
|
|
Note: In dual mode, a change of channel configuration generates a restart that can produce a loss of synchronization. It is recommended to disable dual mode before any configuration change.
|
||
|
|
Note: In case of simultaneous mode used: Exactly the same sampling time should be configured for the 2 channels that will be sampled simultaneously by ACD1 and ADC2.
|
||
|
|
Note: In case of interleaved mode used: To avoid overlap between conversions, maximum sampling time allowed is 7 ADC clock cycles for fast interleaved mode and 14 ADC clock cycles for slow interleaved mode.
|
||
|
|
Note: Some multimode parameters are fixed on STM32F1 and can be configured on other STM32 devices with several ADC (multimode configuration structure can have additional parameters).
|
||
|
|
The equivalences are:
|
||
|
|
- Parameter 'DMAAccessMode': On STM32F1, this parameter is fixed to 1 DMA channel (one DMA channel for both ADC, DMA of ADC master). On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_DMAACCESSMODE_12_10_BITS'.
|
||
|
|
- Parameter 'TwoSamplingDelay': On STM32F1, this parameter is fixed to 7 or 14 ADC clock cycles depending on fast or slow interleaved mode selected. On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_TWOSAMPLINGDELAY_7CYCLES' (for fast interleaved mode). */
|
||
|
|
|
||
|
|
|
||
|
|
}ADC_MultiModeTypeDef;
|
||
|
|
#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/* Exported constants --------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @defgroup ADCEx_Exported_Constants ADCEx Exported Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup ADCEx_injected_rank ADCEx rank into injected group
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define ADC_INJECTED_RANK_1 0x00000001U
|
||
|
|
#define ADC_INJECTED_RANK_2 0x00000002U
|
||
|
|
#define ADC_INJECTED_RANK_3 0x00000003U
|
||
|
|
#define ADC_INJECTED_RANK_4 0x00000004U
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup ADCEx_External_trigger_edge_Injected ADCEx external trigger enable for injected group
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE 0x00000000U
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING ((uint32_t)ADC_CR2_JEXTTRIG)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup ADC_External_trigger_source_Regular ADC External trigger selection for regular group
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/*!< List of external triggers with generic trigger name, independently of */
|
||
|
|
/* ADC target, sorted by trigger name: */
|
||
|
|
|
||
|
|
/*!< External triggers of regular group for ADC1&ADC2 only */
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T4_CC4 ADC1_2_EXTERNALTRIG_T4_CC4
|
||
|
|
#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11
|
||
|
|
|
||
|
|
#if defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
/*!< External triggers of regular group for ADC3 only */
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T2_CC3 ADC3_EXTERNALTRIG_T2_CC3
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T3_CC1 ADC3_EXTERNALTRIG_T3_CC1
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T5_CC1 ADC3_EXTERNALTRIG_T5_CC1
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T5_CC3 ADC3_EXTERNALTRIG_T5_CC3
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T8_CC1 ADC3_EXTERNALTRIG_T8_CC1
|
||
|
|
#endif /* STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
/*!< External triggers of regular group for all ADC instances */
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_3_EXTERNALTRIG_T1_CC3
|
||
|
|
|
||
|
|
#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
|
||
|
|
/*!< Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and */
|
||
|
|
/* XL-density devices. */
|
||
|
|
/* To use it on ADC or ADC2, a remap of trigger must be done from */
|
||
|
|
/* EXTI line 11 to TIM8_TRGO with macro: */
|
||
|
|
/* __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() */
|
||
|
|
/* __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE() */
|
||
|
|
|
||
|
|
/* Note for internal constant value management: If TIM8_TRGO is available, */
|
||
|
|
/* its definition is set to value for ADC1&ADC2 by default and changed to */
|
||
|
|
/* value for ADC3 by HAL ADC driver if ADC3 is selected. */
|
||
|
|
#define ADC_EXTERNALTRIGCONV_T8_TRGO ADC1_2_EXTERNALTRIG_T8_TRGO
|
||
|
|
#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
|
||
|
|
|
||
|
|
#define ADC_SOFTWARE_START ADC1_2_3_SWSTART
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup ADCEx_External_trigger_source_Injected ADCEx External trigger selection for injected group
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/*!< List of external triggers with generic trigger name, independently of */
|
||
|
|
/* ADC target, sorted by trigger name: */
|
||
|
|
|
||
|
|
/*!< External triggers of injected group for ADC1&ADC2 only */
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
|
||
|
|
|
||
|
|
#if defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
/*!< External triggers of injected group for ADC3 only */
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ADC3_EXTERNALTRIGINJEC_T4_CC3
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ADC3_EXTERNALTRIGINJEC_T8_CC2
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ADC3_EXTERNALTRIGINJEC_T5_TRGO
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ADC3_EXTERNALTRIGINJEC_T5_CC4
|
||
|
|
#endif /* STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
/*!< External triggers of injected group for all ADC instances */
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO
|
||
|
|
|
||
|
|
#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
|
||
|
|
/*!< Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and */
|
||
|
|
/* XL-density devices. */
|
||
|
|
/* To use it on ADC1 or ADC2, a remap of trigger must be done from */
|
||
|
|
/* EXTI line 11 to TIM8_CC4 with macro: */
|
||
|
|
/* __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() */
|
||
|
|
/* __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE() */
|
||
|
|
|
||
|
|
/* Note for internal constant value management: If TIM8_CC4 is available, */
|
||
|
|
/* its definition is set to value for ADC1&ADC2 by default and changed to */
|
||
|
|
/* value for ADC3 by HAL ADC driver if ADC3 is selected. */
|
||
|
|
#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T8_CC4
|
||
|
|
#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
|
||
|
|
|
||
|
|
#define ADC_INJECTED_SOFTWARE_START ADC1_2_3_JSWSTART
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
/** @defgroup ADCEx_Common_mode ADC Extended Dual ADC Mode
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define ADC_MODE_INDEPENDENT 0x00000000U /*!< ADC dual mode disabled (ADC independent mode) */
|
||
|
|
#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)( ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined regular simultaneous + injected simultaneous mode, on groups regular and injected */
|
||
|
|
#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)( ADC_CR1_DUALMOD_1 )) /*!< ADC dual mode enabled: Combined regular simultaneous + alternate trigger mode, on groups regular and injected */
|
||
|
|
#define ADC_DUALMODE_INJECSIMULT_INTERLFAST ((uint32_t)( ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined injected simultaneous + fast interleaved mode, on groups regular and injected (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
|
||
|
|
#define ADC_DUALMODE_INJECSIMULT_INTERLSLOW ((uint32_t)( ADC_CR1_DUALMOD_2 )) /*!< ADC dual mode enabled: Combined injected simultaneous + slow Interleaved mode, on groups regular and injected (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
|
||
|
|
#define ADC_DUALMODE_INJECSIMULT ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Injected simultaneous mode, on group injected */
|
||
|
|
#define ADC_DUALMODE_REGSIMULT ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 )) /*!< ADC dual mode enabled: Regular simultaneous mode, on group regular */
|
||
|
|
#define ADC_DUALMODE_INTERLFAST ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Fast interleaved mode, on group regular (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
|
||
|
|
#define ADC_DUALMODE_INTERLSLOW ((uint32_t)(ADC_CR1_DUALMOD_3 )) /*!< ADC dual mode enabled: Slow interleaved mode, on group regular (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
|
||
|
|
#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CR1_DUALMOD_3 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Alternate trigger mode, on group injected */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/* Private constants ---------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @addtogroup ADCEx_Private_Constants ADCEx Private Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Regular ADC Extended Internal HAL driver trigger selection for regular group
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* List of external triggers of regular group for ADC1, ADC2, ADC3 (if ADC */
|
||
|
|
/* instance is available on the selected device). */
|
||
|
|
/* (used internally by HAL driver. To not use into HAL structure parameters) */
|
||
|
|
|
||
|
|
/* External triggers of regular group for ADC1&ADC2 (if ADCx available) */
|
||
|
|
#define ADC1_2_EXTERNALTRIG_T1_CC1 0x00000000U
|
||
|
|
#define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)( ADC_CR2_EXTSEL_0))
|
||
|
|
#define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)( ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
|
||
|
|
#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 ))
|
||
|
|
#define ADC1_2_EXTERNALTRIG_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
|
||
|
|
#define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 ))
|
||
|
|
#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
/* Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and */
|
||
|
|
/* XL-density devices. */
|
||
|
|
#define ADC1_2_EXTERNALTRIG_T8_TRGO ADC1_2_EXTERNALTRIG_EXT_IT11
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
/* External triggers of regular group for ADC3 */
|
||
|
|
#define ADC3_EXTERNALTRIG_T3_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
|
||
|
|
#define ADC3_EXTERNALTRIG_T2_CC3 ADC1_2_EXTERNALTRIG_T1_CC2
|
||
|
|
#define ADC3_EXTERNALTRIG_T8_CC1 ADC1_2_EXTERNALTRIG_T2_CC2
|
||
|
|
#define ADC3_EXTERNALTRIG_T8_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
|
||
|
|
#define ADC3_EXTERNALTRIG_T5_CC1 ADC1_2_EXTERNALTRIG_T4_CC4
|
||
|
|
#define ADC3_EXTERNALTRIG_T5_CC3 ADC1_2_EXTERNALTRIG_EXT_IT11
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* External triggers of regular group for ADC1&ADC2&ADC3 (if ADCx available) */
|
||
|
|
#define ADC1_2_3_EXTERNALTRIG_T1_CC3 ((uint32_t)( ADC_CR2_EXTSEL_1 ))
|
||
|
|
#define ADC1_2_3_SWSTART ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected ADC Extended Internal HAL driver trigger selection for injected group
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* List of external triggers of injected group for ADC1, ADC2, ADC3 (if ADC */
|
||
|
|
/* instance is available on the selected device). */
|
||
|
|
/* (used internally by HAL driver. To not use into HAL structure parameters) */
|
||
|
|
|
||
|
|
/* External triggers of injected group for ADC1&ADC2 (if ADCx available) */
|
||
|
|
#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_1 ))
|
||
|
|
#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)( ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
|
||
|
|
#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 ))
|
||
|
|
#define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
|
||
|
|
#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 ))
|
||
|
|
#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
/* Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and */
|
||
|
|
/* XL-density devices. */
|
||
|
|
#define ADC1_2_EXTERNALTRIGINJEC_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
/* External triggers of injected group for ADC3 */
|
||
|
|
#define ADC3_EXTERNALTRIGINJEC_T4_CC3 ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
|
||
|
|
#define ADC3_EXTERNALTRIGINJEC_T8_CC2 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
|
||
|
|
#define ADC3_EXTERNALTRIGINJEC_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
|
||
|
|
#define ADC3_EXTERNALTRIGINJEC_T5_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
|
||
|
|
#define ADC3_EXTERNALTRIGINJEC_T5_CC4 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
|
||
|
|
#endif /* STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
/* External triggers of injected group for ADC1&ADC2&ADC3 (if ADCx available) */
|
||
|
|
#define ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO 0x00000000U
|
||
|
|
#define ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)( ADC_CR2_JEXTSEL_0))
|
||
|
|
#define ADC1_2_3_JSWSTART ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/* Exported macro ------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/* Private macro -------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @defgroup ADCEx_Private_Macro ADCEx Private Macro
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Macro reserved for internal HAL driver usage, not intended to be used in */
|
||
|
|
/* code of final user. */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief For devices with 3 ADCs: Defines the external trigger source
|
||
|
|
* for regular group according to ADC into common group ADC1&ADC2 or
|
||
|
|
* ADC3 (some triggers with same source have different value to
|
||
|
|
* be programmed into ADC EXTSEL bits of CR2 register).
|
||
|
|
* For devices with 2 ADCs or less: this macro makes no change.
|
||
|
|
* @param __HANDLE__: ADC handle
|
||
|
|
* @param __EXT_TRIG_CONV__: External trigger selected for regular group.
|
||
|
|
* @retval External trigger to be programmed into EXTSEL bits of CR2 register
|
||
|
|
*/
|
||
|
|
#if defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
#define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \
|
||
|
|
(( (((__HANDLE__)->Instance) == ADC3) \
|
||
|
|
)? \
|
||
|
|
( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T8_TRGO \
|
||
|
|
)? \
|
||
|
|
(ADC3_EXTERNALTRIG_T8_TRGO) \
|
||
|
|
: \
|
||
|
|
(__EXT_TRIG_CONV__) \
|
||
|
|
) \
|
||
|
|
: \
|
||
|
|
(__EXT_TRIG_CONV__) \
|
||
|
|
)
|
||
|
|
#else
|
||
|
|
#define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \
|
||
|
|
(__EXT_TRIG_CONV__)
|
||
|
|
#endif /* STM32F103xE || STM32F103xG */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief For devices with 3 ADCs: Defines the external trigger source
|
||
|
|
* for injected group according to ADC into common group ADC1&ADC2 or
|
||
|
|
* ADC3 (some triggers with same source have different value to
|
||
|
|
* be programmed into ADC JEXTSEL bits of CR2 register).
|
||
|
|
* For devices with 2 ADCs or less: this macro makes no change.
|
||
|
|
* @param __HANDLE__: ADC handle
|
||
|
|
* @param __EXT_TRIG_INJECTCONV__: External trigger selected for injected group.
|
||
|
|
* @retval External trigger to be programmed into JEXTSEL bits of CR2 register
|
||
|
|
*/
|
||
|
|
#if defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
#define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \
|
||
|
|
(( (((__HANDLE__)->Instance) == ADC3) \
|
||
|
|
)? \
|
||
|
|
( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4 \
|
||
|
|
)? \
|
||
|
|
(ADC3_EXTERNALTRIGINJEC_T8_CC4) \
|
||
|
|
: \
|
||
|
|
(__EXT_TRIG_INJECTCONV__) \
|
||
|
|
) \
|
||
|
|
: \
|
||
|
|
(__EXT_TRIG_INJECTCONV__) \
|
||
|
|
)
|
||
|
|
#else
|
||
|
|
#define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \
|
||
|
|
(__EXT_TRIG_INJECTCONV__)
|
||
|
|
#endif /* STM32F103xE || STM32F103xG */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Verification if multimode is enabled for the selected ADC (multimode ADC master or ADC slave) (applicable for devices with several ADCs)
|
||
|
|
* @param __HANDLE__: ADC handle
|
||
|
|
* @retval Multimode state: RESET if multimode is disabled, other value if multimode is enabled
|
||
|
|
*/
|
||
|
|
#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
#define ADC_MULTIMODE_IS_ENABLE(__HANDLE__) \
|
||
|
|
(( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2) \
|
||
|
|
)? \
|
||
|
|
(ADC1->CR1 & ADC_CR1_DUALMOD) \
|
||
|
|
: \
|
||
|
|
(RESET) \
|
||
|
|
)
|
||
|
|
#else
|
||
|
|
#define ADC_MULTIMODE_IS_ENABLE(__HANDLE__) \
|
||
|
|
(RESET)
|
||
|
|
#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Verification of condition for ADC start conversion: ADC must be in non-multimode, or multimode with handle of ADC master (applicable for devices with several ADCs)
|
||
|
|
* @param __HANDLE__: ADC handle
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \
|
||
|
|
(( (((__HANDLE__)->Instance) == ADC2) \
|
||
|
|
)? \
|
||
|
|
((ADC1->CR1 & ADC_CR1_DUALMOD) == RESET) \
|
||
|
|
: \
|
||
|
|
(!RESET) \
|
||
|
|
)
|
||
|
|
#else
|
||
|
|
#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \
|
||
|
|
(!RESET)
|
||
|
|
#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check ADC multimode setting: In case of multimode, check whether ADC master of the selected ADC has feature auto-injection enabled (applicable for devices with several ADCs)
|
||
|
|
* @param __HANDLE__: ADC handle
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
#define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__) \
|
||
|
|
(( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2) \
|
||
|
|
)? \
|
||
|
|
(ADC1->CR1 & ADC_CR1_JAUTO) \
|
||
|
|
: \
|
||
|
|
(RESET) \
|
||
|
|
)
|
||
|
|
#else
|
||
|
|
#define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__) \
|
||
|
|
(RESET)
|
||
|
|
#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
/**
|
||
|
|
* @brief Set handle of the other ADC sharing the common multimode settings
|
||
|
|
* @param __HANDLE__: ADC handle
|
||
|
|
* @param __HANDLE_OTHER_ADC__: other ADC handle
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__) \
|
||
|
|
((__HANDLE_OTHER_ADC__)->Instance = ADC2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set handle of the ADC slave associated to the ADC master
|
||
|
|
* On STM32F1 devices, ADC slave is always ADC2 (this can be different
|
||
|
|
* on other STM32 devices)
|
||
|
|
* @param __HANDLE_MASTER__: ADC master handle
|
||
|
|
* @param __HANDLE_SLAVE__: ADC slave handle
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__) \
|
||
|
|
((__HANDLE_SLAVE__)->Instance = ADC2)
|
||
|
|
|
||
|
|
#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \
|
||
|
|
((CHANNEL) == ADC_INJECTED_RANK_2) || \
|
||
|
|
((CHANNEL) == ADC_INJECTED_RANK_3) || \
|
||
|
|
((CHANNEL) == ADC_INJECTED_RANK_4))
|
||
|
|
|
||
|
|
#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \
|
||
|
|
((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING))
|
||
|
|
|
||
|
|
/** @defgroup ADCEx_injected_nb_conv_verification ADCEx injected nb conv verification
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define IS_ADC_INJECTED_NB_CONV(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 4U))
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC)
|
||
|
|
#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
|
||
|
|
((REGTRIG) == ADC_SOFTWARE_START))
|
||
|
|
#endif
|
||
|
|
#if defined (STM32F101xE)
|
||
|
|
#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_SOFTWARE_START))
|
||
|
|
#endif
|
||
|
|
#if defined (STM32F101xG)
|
||
|
|
#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
|
||
|
|
((REGTRIG) == ADC_SOFTWARE_START))
|
||
|
|
#endif
|
||
|
|
#if defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_SOFTWARE_START))
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC)
|
||
|
|
#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
|
||
|
|
#endif
|
||
|
|
#if defined (STM32F101xE)
|
||
|
|
#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
|
||
|
|
((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
|
||
|
|
#endif
|
||
|
|
#if defined (STM32F101xG)
|
||
|
|
#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
|
||
|
|
#endif
|
||
|
|
#if defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
|
||
|
|
((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
|
||
|
|
((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \
|
||
|
|
((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \
|
||
|
|
((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \
|
||
|
|
((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLFAST) || \
|
||
|
|
((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLSLOW) || \
|
||
|
|
((MODE) == ADC_DUALMODE_INJECSIMULT) || \
|
||
|
|
((MODE) == ADC_DUALMODE_REGSIMULT) || \
|
||
|
|
((MODE) == ADC_DUALMODE_INTERLFAST) || \
|
||
|
|
((MODE) == ADC_DUALMODE_INTERLSLOW) || \
|
||
|
|
((MODE) == ADC_DUALMODE_ALTERTRIG) )
|
||
|
|
#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
/* Exported functions --------------------------------------------------------*/
|
||
|
|
/** @addtogroup ADCEx_Exported_Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* IO operation functions *****************************************************/
|
||
|
|
/** @addtogroup ADCEx_Exported_Functions_Group1
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* ADC calibration */
|
||
|
|
HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc);
|
||
|
|
|
||
|
|
/* Blocking mode: Polling */
|
||
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
|
||
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
|
||
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
|
||
|
|
|
||
|
|
/* Non-blocking mode: Interruption */
|
||
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
|
||
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
|
||
|
|
|
||
|
|
#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
/* ADC multimode */
|
||
|
|
HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length);
|
||
|
|
HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef *hadc);
|
||
|
|
#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
/* ADC retrieve conversion value intended to be used with polling or interruption */
|
||
|
|
uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
|
||
|
|
#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef *hadc);
|
||
|
|
#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
|
||
|
|
|
||
|
|
/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */
|
||
|
|
void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/* Peripheral Control functions ***********************************************/
|
||
|
|
/** @addtogroup ADCEx_Exported_Functions_Group2
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
|
||
|
|
#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
|
||
|
|
HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode);
|
||
|
|
#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* __STM32F1xx_HAL_ADC_EX_H */
|
||
|
|
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|