diff --git a/GEX HUB (F072)/README.md b/GEX HUB (F072)/README.md new file mode 100644 index 0000000..758573b --- /dev/null +++ b/GEX HUB (F072)/README.md @@ -0,0 +1,17 @@ +GEX F072 hub prototype board +============================ + +This board was the first custom PCB for GEX. + +To flash a firmware, remove JP1, reset and flash using DFU. Replace JP1 and reset for normal operation. + +Press and hold S1 to enable USB VFS with config files. Same process for locking and persisting to Flash. +Settings (but not system settings) can also be changed via the USB API. + +![photo](photo.jpg) + +rev.2 changes +------------- + +The BOOT jumper is now inside the A connector, +and the function is reversed - insert a jumper between BOOT and 3V3 to enter bootloader. diff --git a/f072-hub-r.1/photo.jpg b/GEX HUB (F072)/photo.jpg similarity index 100% rename from f072-hub-r.1/photo.jpg rename to GEX HUB (F072)/photo.jpg diff --git a/f072-hub-r.1/GEX_Dongle.PrjPCB b/GEX HUB (F072)/rev.1/GEX_Dongle.PrjPCB similarity index 100% rename from f072-hub-r.1/GEX_Dongle.PrjPCB rename to GEX HUB (F072)/rev.1/GEX_Dongle.PrjPCB diff --git a/f072-hub-r.1/GEX_Dongle.PrjPCBStructure b/GEX HUB (F072)/rev.1/GEX_Dongle.PrjPCBStructure similarity index 100% rename from f072-hub-r.1/GEX_Dongle.PrjPCBStructure rename to GEX HUB (F072)/rev.1/GEX_Dongle.PrjPCBStructure diff --git a/f072-hub-r.1/GEX_Dongle.SchDoc b/GEX HUB (F072)/rev.1/GEX_Dongle.SchDoc similarity index 100% rename from f072-hub-r.1/GEX_Dongle.SchDoc rename to GEX HUB (F072)/rev.1/GEX_Dongle.SchDoc diff --git a/f072-hub-r.1/GEX_Dongle.pdf b/GEX HUB (F072)/rev.1/GEX_Dongle.pdf similarity index 100% rename from f072-hub-r.1/GEX_Dongle.pdf rename to GEX HUB (F072)/rev.1/GEX_Dongle.pdf diff --git a/f072-hub-r.1/GEX_IDC.PcbDoc b/GEX HUB (F072)/rev.1/GEX_IDC.PcbDoc similarity index 100% rename from f072-hub-r.1/GEX_IDC.PcbDoc rename to GEX HUB (F072)/rev.1/GEX_IDC.PcbDoc diff --git a/GEX HUB (F072)/rev.1/README.md b/GEX HUB (F072)/rev.1/README.md new file mode 100644 index 0000000..f46f587 --- /dev/null +++ b/GEX HUB (F072)/rev.1/README.md @@ -0,0 +1,8 @@ +Errata +------ + +- JP1 - bad footprint, too fine pitch. Can be fixed by soldering the header on the bottom, with slightly bent pins +- P1 - the SWD connector, same problem, no fix needed or available. Use DFU for flashing +- Missign NRESET button. Normally not needed, but often missed. You can solder it on the bottom side from one end of R2 to the GND testpoint. + +![photo](bugfixes.jpg) diff --git a/f072-hub-r.1/bugfixes.jpg b/GEX HUB (F072)/rev.1/bugfixes.jpg similarity index 100% rename from f072-hub-r.1/bugfixes.jpg rename to GEX HUB (F072)/rev.1/bugfixes.jpg diff --git a/f072-hub-r.1/gerbers_oshpark.zip b/GEX HUB (F072)/rev.1/gerbers_oshpark.zip similarity index 100% rename from f072-hub-r.1/gerbers_oshpark.zip rename to GEX HUB (F072)/rev.1/gerbers_oshpark.zip diff --git a/GEX HUB (F072)/rev.2/GEX_IDC.RUL b/GEX HUB (F072)/rev.2/GEX_IDC.RUL new file mode 100755 index 0000000..ef73209 --- /dev/null +++ b/GEX HUB (F072)/rev.2/GEX_IDC.RUL @@ -0,0 +1,36 @@ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=Clearance|NETSCOPE=DifferentNets|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=Clearance|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=TERASYHR|DEFINEDBYLOGICALDOCUMENT=FALSE|GAP=10mil|GENERICCLEARANCE=10mil|OBJECTCLEARANCES=ClearanceObj_Track-ClearanceObj_Track:70000;ClearanceObj_Track-ClearanceObj_SMDPad:70000;ClearanceObj_SMDPad-ClearanceObj_SMDPad:70000¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=Width|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=(InNet('3V3') OR InNet('3V3A') OR InNet('5V'))|SCOPE2EXPRESSION=All|NAME=ThickSupply|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=FBPKYUYG|DEFINEDBYLOGICALDOCUMENT=FALSE|MAXLIMIT=40mil|MINLIMIT=12mil|PREFEREDWIDTH=40mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=Width|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=Width|ENABLED=TRUE|PRIORITY=2|COMMENT= |UNIQUEID=DJBNSUCE|DEFINEDBYLOGICALDOCUMENT=FALSE|MAXLIMIT=100mil|MINLIMIT=7mil|PREFEREDWIDTH=10mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=PlaneConnect|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=PlaneConnect|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=QIXQFIGC|DEFINEDBYLOGICALDOCUMENT=FALSE|PLANECONNECTSTYLE=Relief|RELIEFEXPANSION=20mil|RELIEFENTRIES=4|RELIEFCONDUCTORWIDTH=10mil|RELIEFAIRGAP=10mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=RoutingTopology|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=RoutingTopology|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=UGAPHTQG|DEFINEDBYLOGICALDOCUMENT=FALSE|TOPOLOGY=Shortest¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=RoutingPriority|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=RoutingPriority|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=FNLULPXR|DEFINEDBYLOGICALDOCUMENT=FALSE|ROUTINGPRIORITY=0¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=RoutingLayers|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=RoutingLayers|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=HXUOQAWR|DEFINEDBYLOGICALDOCUMENT=FALSE|TOP LAYER_V5=TRUE|MID LAYER 1_V5=TRUE|MID LAYER 2_V5=TRUE|MID LAYER 3_V5=TRUE|MID LAYER 4_V5=TRUE|MID LAYER 5_V5=TRUE|MID LAYER 6_V5=TRUE|MID LAYER 7_V5=TRUE|MID LAYER 8_V5=TRUE|MID LAYER 9_V5=TRUE|MID LAYER 10_V5=TRUE|MID LAYER 11_V5=TRUE|MID LAYER 12_V5=TRUE|MID LAYER 13_V5=TRUE|MID LAYER 14_V5=TRUE|MID LAYER 15_V5=TRUE|MID LAYER 16_V5=TRUE|MID LAYER 17_V5=TRUE|MID LAYER 18_V5=TRUE|MID LAYER 19_V5=TRUE|MID LAYER 20_V5=TRUE|MID LAYER 21_V5=TRUE|MID LAYER 22_V5=TRUE|MID LAYER 23_V5=TRUE|MID LAYER 24_V5=TRUE|MID LAYER 25_V5=TRUE|MID LAYER 26_V5=TRUE|MID LAYER 27_V5=TRUE|MID LAYER 28_V5=TRUE|MID LAYER 29_V5=TRUE|MID LAYER 30_V5=TRUE|BOTTOM LAYER_V5=TRUE¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=RoutingCorners|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=RoutingCorners|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=AUWPKIHQ|DEFINEDBYLOGICALDOCUMENT=FALSE|CORNERSTYLE=45-Degree|MINSETBACK=100mil|MAXSETBACK=100mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=RoutingVias|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=RoutingVias|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=CALOJAJK|DEFINEDBYLOGICALDOCUMENT=FALSE|HOLEWIDTH=14mil|WIDTH=24mil|VIASTYLE=Through Hole|MINHOLEWIDTH=14mil|MINWIDTH=24mil|MAXHOLEWIDTH=100mil|MAXWIDTH=100mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=PlaneClearance|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=PlaneClearance|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=IOVBUITL|DEFINEDBYLOGICALDOCUMENT=FALSE|CLEARANCE=20mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=SolderMaskExpansion|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=SolderMaskExpansion|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=PXDXORNC|DEFINEDBYLOGICALDOCUMENT=FALSE|EXPANSION=2mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=PasteMaskExpansion|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=PasteMaskExpansion|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=JWJFUWDX|DEFINEDBYLOGICALDOCUMENT=FALSE|EXPANSION=0mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=ShortCircuit|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=ShortCircuit|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=HXCXHPVY|DEFINEDBYLOGICALDOCUMENT=FALSE|ALLOWED=FALSE¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=UnRoutedNet|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=UnRoutedNet|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=FPRVQIIJ|DEFINEDBYLOGICALDOCUMENT=FALSE¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=PolygonConnect|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=InNet('GND') And IsVia|NAME=PolygonConnect_GND|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=RPQVSLSV|DEFINEDBYLOGICALDOCUMENT=FALSE|CONNECTSTYLE=Direct|RELIEFCONDUCTORWIDTH=10mil|RELIEFENTRIES=4|POLYGONRELIEFANGLE=90 Angle|AIRGAPWIDTH=10mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=PolygonConnect|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=PolygonConnect|ENABLED=TRUE|PRIORITY=2|COMMENT= |UNIQUEID=UUPUHHWW|DEFINEDBYLOGICALDOCUMENT=FALSE|CONNECTSTYLE=Relief|RELIEFCONDUCTORWIDTH=10mil|RELIEFENTRIES=4|POLYGONRELIEFANGLE=90 Angle|AIRGAPWIDTH=10mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=ComponentClearance|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=ComponentClearance|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=RHGRIRCX|DEFINEDBYLOGICALDOCUMENT=FALSE|GAP=10mil|COLLISIONCHECKMODE=3|VERTICALGAP=10mil|SHOWDISTANCES=FALSE¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=HoleSize|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=HoleSize|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=LFAOOLYR|DEFINEDBYLOGICALDOCUMENT=FALSE|ABSOLUTEVALUES=TRUE|MAXLIMIT=100mil|MINLIMIT=1mil|MAXPERCENT=80.000|MINPERCENT=20.000¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=FabricationTestpoint|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=FabricationTestpoint|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=UOPFEJGR|DEFINEDBYLOGICALDOCUMENT=FALSE|SIDE=3|TESTPOINTUNDERCOMPONENT=TRUE|MINSIZE=40mil|MAXSIZE=100mil|PREFEREDSIZE=60mil|MINHOLESIZE=0mil|MAXHOLESIZE=40mil|PREFEREDHOLESIZE=32mil|TESTPOINTGRID=1mil|ALLOWSIDETOP=TRUE|ALLOWSIDEBOTTOM=TRUE|USEGRID=TRUE|GRIDTOLERANCE=0.01mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=FabricationTestPointUsage|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=FabricationTestPointUsage|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=BTRTHSXL|DEFINEDBYLOGICALDOCUMENT=FALSE|VALID=0|ALLOWMULTIPLE=FALSE¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=LayerPairs|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=LayerPairs|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=ANCLPJJN|DEFINEDBYLOGICALDOCUMENT=FALSE|ENFORCE=TRUE¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=FanoutControl|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=IsBGA|SCOPE2EXPRESSION=All|NAME=Fanout_BGA|ENABLED=TRUE|PRIORITY=1|COMMENT=Fanout_BGA (Default Rule)|UNIQUEID=EWIMMDHR|DEFINEDBYLOGICALDOCUMENT=FALSE|BGADIR=Out|BGAVIAMODE=Centered|FANOUTSTYLE=Auto|FANOUTDIRECTION=Alternating|VIAGRID=1mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=FanoutControl|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=IsLCC|SCOPE2EXPRESSION=All|NAME=Fanout_LCC|ENABLED=TRUE|PRIORITY=2|COMMENT=Fanout_LCC (Default Rule)|UNIQUEID=PGGWUJHD|DEFINEDBYLOGICALDOCUMENT=FALSE|BGADIR=Out|BGAVIAMODE=Centered|FANOUTSTYLE=Auto|FANOUTDIRECTION=Alternating|VIAGRID=1mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=FanoutControl|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=IsSOIC|SCOPE2EXPRESSION=All|NAME=Fanout_SOIC|ENABLED=TRUE|PRIORITY=3|COMMENT=Fanout_SOIC (Default Rule)|UNIQUEID=WTVRDXTM|DEFINEDBYLOGICALDOCUMENT=FALSE|BGADIR=Out|BGAVIAMODE=Centered|FANOUTSTYLE=Auto|FANOUTDIRECTION=Alternating|VIAGRID=1mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=FanoutControl|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=(CompPinCount < 5)|SCOPE2EXPRESSION=All|NAME=Fanout_Small|ENABLED=TRUE|PRIORITY=4|COMMENT=Fanout_Small (Default Rule)|UNIQUEID=NMVPNRXT|DEFINEDBYLOGICALDOCUMENT=FALSE|BGADIR=Out|BGAVIAMODE=Centered|FANOUTSTYLE=Auto|FANOUTDIRECTION=OutThenIn|VIAGRID=1mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=FanoutControl|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=Fanout_Default|ENABLED=TRUE|PRIORITY=5|COMMENT=Fanout_Default (Default Rule)|UNIQUEID=GELNJKSC|DEFINEDBYLOGICALDOCUMENT=FALSE|BGADIR=Out|BGAVIAMODE=Centered|FANOUTSTYLE=Auto|FANOUTDIRECTION=Alternating|VIAGRID=1mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=Height|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=Height|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=BCHIAKRY|DEFINEDBYLOGICALDOCUMENT=FALSE|MINHEIGHT=0mil|MAXHEIGHT=1000mil|PREFHEIGHT=500mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=DiffPairsRouting|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=DiffPairsRouting|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=NFYIMYKF|DEFINEDBYLOGICALDOCUMENT=FALSE|MAXLIMIT=10mil|MINLIMIT=10mil|MOSTFREQGAP=10mil|TOPLAYER_MINWIDTH=15mil|TOPLAYER_MAXWIDTH=15mil|TOPLAYER_PREFWIDTH=15mil|MIDLAYER1_MINWIDTH=15mil|MIDLAYER1_MAXWIDTH=15mil|MIDLAYER1_PREFWIDTH=15mil|MIDLAYER2_MINWIDTH=15mil|MIDLAYER2_MAXWIDTH=15mil|MIDLAYER2_PREFWIDTH=15mil|MIDLAYER3_MINWIDTH=15mil|MIDLAYER3_MAXWIDTH=15mil|MIDLAYER3_PREFWIDTH=15mil|MIDLAYER4_MINWIDTH=15mil|MIDLAYER4_MAXWIDTH=15mil|MIDLAYER4_PREFWIDTH=15mil|MIDLAYER5_MINWIDTH=15mil|MIDLAYER5_MAXWIDTH=15mil|MIDLAYER5_PREFWIDTH=15mil|MIDLAYER6_MINWIDTH=15mil|MIDLAYER6_MAXWIDTH=15mil|MIDLAYER6_PREFWIDTH=15mil|MIDLAYER7_MINWIDTH=15mil|MIDLAYER7_MAXWIDTH=15mil|MIDLAYER7_PREFWIDTH=15mil|MIDLAYER8_MINWIDTH=15mil|MIDLAYER8_MAXWIDTH=15mil|MIDLAYER8_PREFWIDTH=15mil|MIDLAYER9_MINWIDTH=15mil|MIDLAYER9_MAXWIDTH=15mil|MIDLAYER9_PREFWIDTH=15mil|MIDLAYER10_MINWIDTH=15mil|MIDLAYER10_MAXWIDTH=15mil|MIDLAYER10_PREFWIDTH=15mil|MIDLAYER11_MINWIDTH=15mil|MIDLAYER11_MAXWIDTH=15mil|MIDLAYER11_PREFWIDTH=15mil|MIDLAYER12_MINWIDTH=15mil|MIDLAYER12_MAXWIDTH=15mil|MIDLAYER12_PREFWIDTH=15mil|MIDLAYER13_MINWIDTH=15mil|MIDLAYER13_MAXWIDTH=15mil|MIDLAYER13_PREFWIDTH=15mil|MIDLAYER14_MINWIDTH=15mil|MIDLAYER14_MAXWIDTH=15mil|MIDLAYER14_PREFWIDTH=15mil|MIDLAYER15_MINWIDTH=15mil|MIDLAYER15_MAXWIDTH=15mil|MIDLAYER15_PREFWIDTH=15mil|MIDLAYER16_MINWIDTH=15mil|MIDLAYER16_MAXWIDTH=15mil|MIDLAYER16_PREFWIDTH=15mil|MIDLAYER17_MINWIDTH=15mil|MIDLAYER17_MAXWIDTH=15mil|MIDLAYER17_PREFWIDTH=15mil|MIDLAYER18_MINWIDTH=15mil|MIDLAYER18_MAXWIDTH=15mil|MIDLAYER18_PREFWIDTH=15mil|MIDLAYER19_MINWIDTH=15mil|MIDLAYER19_MAXWIDTH=15mil|MIDLAYER19_PREFWIDTH=15mil|MIDLAYER20_MINWIDTH=15mil|MIDLAYER20_MAXWIDTH=15mil|MIDLAYER20_PREFWIDTH=15mil|MIDLAYER21_MINWIDTH=15mil|MIDLAYER21_MAXWIDTH=15mil|MIDLAYER21_PREFWIDTH=15mil|MIDLAYER22_MINWIDTH=15mil|MIDLAYER22_MAXWIDTH=15mil|MIDLAYER22_PREFWIDTH=15mil|MIDLAYER23_MINWIDTH=15mil|MIDLAYER23_MAXWIDTH=15mil|MIDLAYER23_PREFWIDTH=15mil|MIDLAYER24_MINWIDTH=15mil|MIDLAYER24_MAXWIDTH=15mil|MIDLAYER24_PREFWIDTH=15mil|MIDLAYER25_MINWIDTH=15mil|MIDLAYER25_MAXWIDTH=15mil|MIDLAYER25_PREFWIDTH=15mil|MIDLAYER26_MINWIDTH=15mil|MIDLAYER26_MAXWIDTH=15mil|MIDLAYER26_PREFWIDTH=15mil|MIDLAYER27_MINWIDTH=15mil|MIDLAYER27_MAXWIDTH=15mil|MIDLAYER27_PREFWIDTH=15mil|MIDLAYER28_MINWIDTH=15mil|MIDLAYER28_MAXWIDTH=15mil|MIDLAYER28_PREFWIDTH=15mil|MIDLAYER29_MINWIDTH=15mil|MIDLAYER29_MAXWIDTH=15mil|MIDLAYER29_PREFWIDTH=15mil|MIDLAYER30_MINWIDTH=15mil|MIDLAYER30_MAXWIDTH=15mil|MIDLAYER30_PREFWIDTH=15mil|BOTTOMLAYER_MINWIDTH=15mil|BOTTOMLAYER_MAXWIDTH=15mil|BOTTOMLAYER_PREFWIDTH=15mil|MAXUNCOUPLEDLENGTH=500mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=HoleToHoleClearance|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=HoleToHoleClearance|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=QACBKLFM|DEFINEDBYLOGICALDOCUMENT=FALSE|GAP=10mil|ALLOWSTACKEDMICROVIAS=TRUE¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=MinimumSolderMaskSliver|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=MinimumSolderMaskSliver|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=BTYGJFHO|DEFINEDBYLOGICALDOCUMENT=FALSE|MINSOLDERMASKWIDTH=10mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=SilkToSolderMaskClearance|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=IsPad|SCOPE2EXPRESSION=All|NAME=SilkToSolderMaskClearance|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=LYRNVRPC|DEFINEDBYLOGICALDOCUMENT=FALSE|MINSILKSCREENTOMASKGAP=10mil|CLEARANCETOEXPOSEDCOPPER=TRUE¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=SilkToSilkClearance|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=SilkToSilkClearance|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=HEOBIINN|DEFINEDBYLOGICALDOCUMENT=FALSE|SILKTOSILKCLEARANCE=10mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=NetAntennae|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=NetAntennae|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=FQBRTGGY|DEFINEDBYLOGICALDOCUMENT=FALSE|NETANTENNAETOLERANCE=0mil¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=AssemblyTestpoint|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=AssemblyTestpoint|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=BFRPUGEJ|DEFINEDBYLOGICALDOCUMENT=FALSE|TESTPOINTUNDERCOMPONENT=TRUE|MINSIZE=40mil|MAXSIZE=100mil|PREFEREDSIZE=60mil|MINHOLESIZE=0mil|MAXHOLESIZE=40mil|PREFEREDHOLESIZE=32mil|TESTPOINTGRID=1mil|USEGRID=TRUE|GRIDTOLERANCE=0.01mil|ALLOWSIDETOP=TRUE|ALLOWSIDEBOTTOM=TRUE¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=AssemblyTestPointUsage|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=AssemblyTestPointUsage|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=DNQNNAOU|DEFINEDBYLOGICALDOCUMENT=FALSE¶ +SELECTION=FALSE|LAYER=TOP|LOCKED=FALSE|POLYGONOUTLINE=FALSE|USERROUTED=TRUE|UNIONINDEX=0|RULEKIND=UnpouredPolygon|NETSCOPE=AnyNet|LAYERKIND=SameLayer|SCOPE1EXPRESSION=All|SCOPE2EXPRESSION=All|NAME=UnpouredPolygon|ENABLED=TRUE|PRIORITY=1|COMMENT= |UNIQUEID=IVELWTCG|DEFINEDBYLOGICALDOCUMENT=FALSE¶ diff --git a/GEX HUB (F072)/rev.2/GEX_IDC.rev2.PcbDoc b/GEX HUB (F072)/rev.2/GEX_IDC.rev2.PcbDoc new file mode 100755 index 0000000..ae8c246 Binary files /dev/null and b/GEX HUB (F072)/rev.2/GEX_IDC.rev2.PcbDoc differ diff --git a/GEX HUB (F072)/rev.2/GEX_IDC.rev2.SchDoc b/GEX HUB (F072)/rev.2/GEX_IDC.rev2.SchDoc new file mode 100755 index 0000000..4e99cda Binary files /dev/null and b/GEX HUB (F072)/rev.2/GEX_IDC.rev2.SchDoc differ diff --git a/GEX HUB (F072)/rev.2/README.md b/GEX HUB (F072)/rev.2/README.md new file mode 100644 index 0000000..6b929e6 --- /dev/null +++ b/GEX HUB (F072)/rev.2/README.md @@ -0,0 +1,13 @@ +GEX F072 hub prototype board, rev.2 +============================ + +This revision fixes some issues with the first version. + +- Connectors now all have both 3V3 and 5V +- BOOT jumper was moved to the A connector and inverted, so putting on a jumper to short it with 3V3 enables bootloader +- Added the NRST pin to the A connector +- Removed the debug connector footprint (was wrong before anyway, and all pins are in the connectors now) +- Added a position for a reset button on the backside +- Added some useful info to the backside silk layer + +This revision should be compatible with the previous HUB firmware without any changes. diff --git a/GEX HUB (F072)/rev.2/gerbers_oshpark.zip b/GEX HUB (F072)/rev.2/gerbers_oshpark.zip new file mode 100755 index 0000000..151ccbb Binary files /dev/null and b/GEX HUB (F072)/rev.2/gerbers_oshpark.zip differ diff --git a/GEX Radio Dongle (F103 NRF caster)/README.md b/GEX Radio Dongle (F103 NRF caster)/README.md new file mode 100644 index 0000000..e1b92a7 --- /dev/null +++ b/GEX Radio Dongle (F103 NRF caster)/README.md @@ -0,0 +1,13 @@ +GEX Radio Dongle +================ + +This board is a GEX accessory. It conencts to GEX Zero (or other GEXes with the NRF module) +and provides UART-like connection using a USB virtual comport. + +The board is fitted with a USB type A connector, a reset button and a debug header. +A NRF24L01+ is soldered onto the PCb and the flat antenna sticks outside the board for better transmission. + +There are no GPIOs broken out due to the limited board size, other than those used for the radio module. This, however, +includes full SPI and 3 other GPIOs, which could be used for other applications if the NRF module is not installed. + +This board uses STM32F103C8T6 (same like Bluepill), so the firmware should be bluepill compatible. diff --git a/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.PcbDoc b/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.PcbDoc new file mode 100755 index 0000000..c19503f Binary files /dev/null and b/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.PcbDoc differ diff --git a/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.PrjPcb b/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.PrjPcb new file mode 100755 index 0000000..b729764 --- /dev/null +++ b/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.PrjPcb @@ -0,0 +1,1096 @@ +[Design] +Version=1.0 +HierarchyMode=0 +ChannelRoomNamingStyle=0 +ReleasesFolder= +ReleaseVaultGUID= +ReleaseVaultName= +ChannelDesignatorFormatString=$Component_$RoomName +ChannelRoomLevelSeperator=_ +OpenOutputs=1 +ArchiveProject=0 +TimestampOutput=0 +SeparateFolders=0 +TemplateLocationPath= +PinSwapBy_Netlabel=1 +PinSwapBy_Pin=1 +AllowPortNetNames=0 +AllowSheetEntryNetNames=1 +AppendSheetNumberToLocalNets=0 +NetlistSinglePinNets=0 +DefaultConfiguration=Default Configuration +UserID=0xFFFFFFFF +DefaultPcbProtel=1 +DefaultPcbPcad=0 +ReorderDocumentsOnCompile=1 +NameNetsHierarchically=0 +PowerPortNamesTakePriority=0 +PushECOToAnnotationFile=1 +DItemRevisionGUID= +ReportSuppressedErrorsInMessages=0 +FSMCodingStyle=eFMSDropDownList_OneProcess +FSMEncodingStyle=eFMSDropDownList_OneHot +OutputPath= +LogFolderPath= +ManagedProjectGUID= + +[Preferences] +PrefsVaultGUID= +PrefsRevisionGUID= + +[Document1] +DocumentPath=GEX_Radio.SchDoc +AnnotationEnabled=1 +AnnotateStartValue=1 +AnnotationIndexControlEnabled=0 +AnnotateSuffix= +AnnotateScope=All +AnnotateOrder=0 +DoLibraryUpdate=1 +DoDatabaseUpdate=1 +ClassGenCCAutoEnabled=1 +ClassGenCCAutoRoomEnabled=1 +ClassGenNCAutoScope=None +DItemRevisionGUID= +GenerateClassCluster=0 +DocumentUniqueId=INBFMFQB + +[Document2] +DocumentPath=GEX_Radio.PcbDoc +AnnotationEnabled=1 +AnnotateStartValue=1 +AnnotationIndexControlEnabled=0 +AnnotateSuffix= +AnnotateScope=All +AnnotateOrder=-1 +DoLibraryUpdate=1 +DoDatabaseUpdate=1 +ClassGenCCAutoEnabled=1 +ClassGenCCAutoRoomEnabled=1 +ClassGenNCAutoScope=None +DItemRevisionGUID= +GenerateClassCluster=0 +DocumentUniqueId=MQHABHDJ + +[GeneratedDocument1] +DocumentPath=Project Outputs for GEX_Radio\Design Rule Check - GEX_Radio.html +DItemRevisionGUID= + +[GeneratedDocument2] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.DRR +DItemRevisionGUID= + +[GeneratedDocument3] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.EXTREP +DItemRevisionGUID= + +[GeneratedDocument4] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.GBL +DItemRevisionGUID= + +[GeneratedDocument5] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.GBO +DItemRevisionGUID= + +[GeneratedDocument6] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.GBS +DItemRevisionGUID= + +[GeneratedDocument7] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.GM1 +DItemRevisionGUID= + +[GeneratedDocument8] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.GTL +DItemRevisionGUID= + +[GeneratedDocument9] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.GTO +DItemRevisionGUID= + +[GeneratedDocument10] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.GTS +DItemRevisionGUID= + +[GeneratedDocument11] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.LDP +DItemRevisionGUID= + +[GeneratedDocument12] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.REP +DItemRevisionGUID= + +[GeneratedDocument13] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.RUL +DItemRevisionGUID= + +[GeneratedDocument14] +DocumentPath=Project Outputs for GEX_Radio\GEX_Radio.TXT +DItemRevisionGUID= + +[Configuration1] +Name=Default Configuration +ParameterCount=0 +ConstraintFileCount=0 +ReleaseItemId= +CurrentRevision= +Variant=[No Variations] +OutputJobsCount=0 + +[OutputGroup1] +Name=Netlist Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=CadnetixNetlist +OutputName1=Cadnetix Netlist +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +OutputType2=CalayNetlist +OutputName2=Calay Netlist +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +OutputType3=EDIF +OutputName3=EDIF for PCB +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +OutputType4=EESofNetlist +OutputName4=EESof Netlist +OutputDocumentPath4= +OutputVariantName4= +OutputDefault4=0 +OutputType5=IntergraphNetlist +OutputName5=Intergraph Netlist +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 +OutputType6=MentorBoardStationNetlist +OutputName6=Mentor BoardStation Netlist +OutputDocumentPath6= +OutputVariantName6= +OutputDefault6=0 +OutputType7=MultiWire +OutputName7=MultiWire +OutputDocumentPath7= +OutputVariantName7= +OutputDefault7=0 +OutputType8=OrCadPCB2Netlist +OutputName8=Orcad/PCB2 Netlist +OutputDocumentPath8= +OutputVariantName8= +OutputDefault8=0 +OutputType9=PADSNetlist +OutputName9=PADS ASCII Netlist +OutputDocumentPath9= +OutputVariantName9= +OutputDefault9=0 +OutputType10=Pcad +OutputName10=Pcad for PCB +OutputDocumentPath10= +OutputVariantName10= +OutputDefault10=0 +OutputType11=PCADNetlist +OutputName11=PCAD Netlist +OutputDocumentPath11= +OutputVariantName11= +OutputDefault11=0 +OutputType12=PCADnltNetlist +OutputName12=PCADnlt Netlist +OutputDocumentPath12= +OutputVariantName12= +OutputDefault12=0 +OutputType13=Protel2Netlist +OutputName13=Protel2 Netlist +OutputDocumentPath13= +OutputVariantName13= +OutputDefault13=0 +OutputType14=ProtelNetlist +OutputName14=Protel +OutputDocumentPath14= +OutputVariantName14= +OutputDefault14=0 +OutputType15=RacalNetlist +OutputName15=Racal Netlist +OutputDocumentPath15= +OutputVariantName15= +OutputDefault15=0 +OutputType16=RINFNetlist +OutputName16=RINF Netlist +OutputDocumentPath16= +OutputVariantName16= +OutputDefault16=0 +OutputType17=SciCardsNetlist +OutputName17=SciCards Netlist +OutputDocumentPath17= +OutputVariantName17= +OutputDefault17=0 +OutputType18=TangoNetlist +OutputName18=Tango Netlist +OutputDocumentPath18= +OutputVariantName18= +OutputDefault18=0 +OutputType19=TelesisNetlist +OutputName19=Telesis Netlist +OutputDocumentPath19= +OutputVariantName19= +OutputDefault19=0 +OutputType20=Verilog +OutputName20=Verilog File +OutputDocumentPath20= +OutputVariantName20= +OutputDefault20=0 +OutputType21=VHDL +OutputName21=VHDL File +OutputDocumentPath21= +OutputVariantName21= +OutputDefault21=0 +OutputType22=WireListNetlist +OutputName22=WireList Netlist +OutputDocumentPath22= +OutputVariantName22= +OutputDefault22=0 +OutputType23=XSpiceNetlist +OutputName23=XSpice Netlist +OutputDocumentPath23= +OutputVariantName23= +OutputDefault23=0 + +[OutputGroup2] +Name=Simulator Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=AdvSimNetlist +OutputName1=Mixed Sim +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 + +[OutputGroup3] +Name=Documentation Outputs +Description= +TargetPrinter=Virtual Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=Assembler Source Print +OutputName1=Assembler Source Prints +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType2=C Source Print +OutputName2=C Source Prints +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +PageOptions2=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType3=C/C++ Header Print +OutputName3=C/C++ Header Prints +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType4=C++ Source Print +OutputName4=C++ Source Prints +OutputDocumentPath4= +OutputVariantName4= +OutputDefault4=0 +PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType5=Composite +OutputName5=Composite Drawing +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 +PageOptions5=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType6=FSM Print +OutputName6=FSM Prints +OutputDocumentPath6= +OutputVariantName6= +OutputDefault6=0 +PageOptions6=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType7=OpenBus Print +OutputName7=OpenBus Prints +OutputDocumentPath7= +OutputVariantName7= +OutputDefault7=0 +PageOptions7=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType8=PCB 3D Print +OutputName8=PCB 3D Print +OutputDocumentPath8= +OutputVariantName8=[No Variations] +OutputDefault8=0 +PageOptions8=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType9=PCB 3D Video +OutputName9=PCB 3D Video +OutputDocumentPath9= +OutputVariantName9=[No Variations] +OutputDefault9=0 +PageOptions9=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType10=PCB Print +OutputName10=PCB Prints +OutputDocumentPath10= +OutputVariantName10= +OutputDefault10=0 +PageOptions10=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType11=PCBDrawing +OutputName11=Draftsman +OutputDocumentPath11= +OutputVariantName11= +OutputDefault11=0 +PageOptions11=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType12=PCBLIB Print +OutputName12=PCBLIB Prints +OutputDocumentPath12= +OutputVariantName12= +OutputDefault12=0 +PageOptions12=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType13=PDF3D +OutputName13=PDF3D +OutputDocumentPath13= +OutputVariantName13=[No Variations] +OutputDefault13=0 +PageOptions13=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType14=Report Print +OutputName14=Report Prints +OutputDocumentPath14= +OutputVariantName14= +OutputDefault14=0 +PageOptions14=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType15=Schematic Print +OutputName15=Schematic Prints +OutputDocumentPath15= +OutputVariantName15= +OutputDefault15=0 +PageOptions15=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType16=SimView Print +OutputName16=SimView Prints +OutputDocumentPath16= +OutputVariantName16= +OutputDefault16=0 +PageOptions16=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType17=VHDL Print +OutputName17=VHDL Prints +OutputDocumentPath17= +OutputVariantName17= +OutputDefault17=0 +PageOptions17=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType18=Wave Print +OutputName18=Wave Prints +OutputDocumentPath18= +OutputVariantName18= +OutputDefault18=0 +PageOptions18=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType19=WaveSim Print +OutputName19=WaveSim Prints +OutputDocumentPath19= +OutputVariantName19= +OutputDefault19=0 +PageOptions19=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 + +[OutputGroup4] +Name=Assembly Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=Assembly +OutputName1=Assembly Drawings +OutputDocumentPath1= +OutputVariantName1=[No Variations] +OutputDefault1=0 +PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType2=Pick Place +OutputName2=Generates pick and place files +OutputDocumentPath2= +OutputVariantName2=[No Variations] +OutputDefault2=0 +OutputType3=Test Points For Assembly +OutputName3=Test Point Report +OutputDocumentPath3= +OutputVariantName3=[No Variations] +OutputDefault3=0 + +[OutputGroup5] +Name=Fabrication Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=CompositeDrill +OutputName1=Composite Drill Drawing +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType2=Drill +OutputName2=Drill Drawing/Guides +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +PageOptions2=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType3=Board Stack Report +OutputName3=Report Board Stack +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType4=Final +OutputName4=Final Artwork Prints +OutputDocumentPath4= +OutputVariantName4=[No Variations] +OutputDefault4=0 +PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType5=Gerber X2 +OutputName5=Gerber X2 Files +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 +OutputType6=ODB +OutputName6=ODB++ Files +OutputDocumentPath6= +OutputVariantName6=[No Variations] +OutputDefault6=0 +OutputType7=Mask +OutputName7=Solder/Paste Mask Prints +OutputDocumentPath7= +OutputVariantName7= +OutputDefault7=0 +PageOptions7=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType8=NC Drill +OutputName8=NC Drill Files +OutputDocumentPath8= +OutputVariantName8= +OutputDefault8=0 +Configuration8_Name1=OutputConfigurationParameter1 +Configuration8_Item1=BoardEdgeRoutToolDia=2000000|GenerateBoardEdgeRout=False|GenerateDrilledSlotsG85=False|GenerateEIADrillFile=False|GenerateSeparatePlatedNonPlatedFiles=False|NumberOfDecimals=5|NumberOfUnits=2|OptimizeChangeLocationCommands=True|OriginPosition=Relative|Record=DrillView|Units=Imperial|ZeroesMode=SuppressTrailingZeroes +OutputType9=IPC2581 +OutputName9=IPC-2581 Files +OutputDocumentPath9= +OutputVariantName9= +OutputDefault9=0 +OutputType10=Plane +OutputName10=Power-Plane Prints +OutputDocumentPath10= +OutputVariantName10= +OutputDefault10=0 +PageOptions10=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType11=Test Points +OutputName11=Test Point Report +OutputDocumentPath11= +OutputVariantName11= +OutputDefault11=0 +OutputType12=Gerber +OutputName12=Gerber Files +OutputDocumentPath12= +OutputVariantName12=[No Variations] +OutputDefault12=0 +Configuration12_Name1=OutputConfigurationParameter1 +Configuration12_Item1=AddToAllLayerClasses.Set= |AddToAllPlots.Set=SerializeLayerHash.Version~2,ClassName~TLayerToBoolean|CentrePlots=False|DrillDrawingSymbol=GraphicsSymbol|DrillDrawingSymbolSize=200000|EmbeddedApertures=True|FilmBorderSize=10000000|FilmXSize=200000000|FilmYSize=160000000|FlashAllFills=False|FlashPadShapes=True|G54OnApertureChange=False|GenerateDRCRulesFile=True|GenerateDRCRulesFile=True|GenerateReliefShapes=True|GerberUnit=Imperial|GerberUnit=Imperial|IncludeUnconnectedMidLayerPads=False|LayerClassesMirror.Set= |LayerClassesPlot.Set= |LeadingAndTrailingZeroesMode=SuppressLeadingZeroes|MaxApertureSize=2500000|MinusApertureTolerance=50|MinusApertureTolerance=50|Mirror.Set=SerializeLayerHash.Version~2,ClassName~TLayerToBoolean|MirrorDrillDrawingPlots=False|MirrorDrillGuidePlots=False|NoRegularPolygons=False|NumberOfDecimals=5|NumberOfDecimals=5|OptimizeChangeLocationCommands=True|OptimizeChangeLocationCommands=True|OriginPosition=Relative|Panelize=False|Plot.Set=SerializeLayerHash.Version~2,ClassName~TLayerToBoolean,16973830~1,16973834~1,16777217~1,16842751~1,16973835~1,16973831~1,16908289~1|PlotPositivePlaneLayers=False|PlotUsedDrillDrawingLayerPairs=False|PlotUsedDrillGuideLayerPairs=False|PlusApertureTolerance=50|PlusApertureTolerance=50|Record=GerberView|SoftwareArcs=False|Sorted=False|Sorted=False + +[OutputGroup6] +Name=Report Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=BOM_PartType +OutputName1=Bill of Materials +OutputDocumentPath1= +OutputVariantName1=[No Variations] +OutputDefault1=0 +PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType2=ComponentCrossReference +OutputName2=Component Cross Reference Report +OutputDocumentPath2= +OutputVariantName2=[No Variations] +OutputDefault2=0 +OutputType3=ReportHierarchy +OutputName3=Report Project Hierarchy +OutputDocumentPath3= +OutputVariantName3=[No Variations] +OutputDefault3=0 +OutputType4=Script +OutputName4=Script Output +OutputDocumentPath4= +OutputVariantName4=[No Variations] +OutputDefault4=0 +OutputType5=SimpleBOM +OutputName5=Simple BOM +OutputDocumentPath5= +OutputVariantName5=[No Variations] +OutputDefault5=0 +OutputType6=SinglePinNetReporter +OutputName6=Report Single Pin Nets +OutputDocumentPath6= +OutputVariantName6=[No Variations] +OutputDefault6=0 + +[OutputGroup7] +Name=Other Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=Text Print +OutputName1=Text Print +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType2=Text Print +OutputName2=Text Print +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +PageOptions2=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType3=Text Print +OutputName3=Text Print +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType4=Text Print +OutputName4=Text Print +OutputDocumentPath4= +OutputVariantName4= +OutputDefault4=0 +PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType5=Text Print +OutputName5=Text Print +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 +PageOptions5=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType6=Text Print +OutputName6=Text Print +OutputDocumentPath6= +OutputVariantName6= +OutputDefault6=0 +PageOptions6=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType7=Text Print +OutputName7=Text Print +OutputDocumentPath7= +OutputVariantName7= +OutputDefault7=0 +PageOptions7=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType8=Text Print +OutputName8=Text Print +OutputDocumentPath8= +OutputVariantName8= +OutputDefault8=0 +PageOptions8=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType9=Text Print +OutputName9=Text Print +OutputDocumentPath9= +OutputVariantName9= +OutputDefault9=0 +PageOptions9=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType10=Text Print +OutputName10=Text Print +OutputDocumentPath10= +OutputVariantName10= +OutputDefault10=0 +PageOptions10=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType11=Text Print +OutputName11=Text Print +OutputDocumentPath11= +OutputVariantName11= +OutputDefault11=0 +PageOptions11=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType12=Text Print +OutputName12=Text Print +OutputDocumentPath12= +OutputVariantName12= +OutputDefault12=0 +PageOptions12=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType13=Text Print +OutputName13=Text Print +OutputDocumentPath13= +OutputVariantName13= +OutputDefault13=0 +PageOptions13=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType14=Text Print +OutputName14=Text Print +OutputDocumentPath14= +OutputVariantName14= +OutputDefault14=0 +PageOptions14=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType15=Text Print +OutputName15=Text Print +OutputDocumentPath15= +OutputVariantName15= +OutputDefault15=0 +PageOptions15=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType16=Text Print +OutputName16=Text Print +OutputDocumentPath16= +OutputVariantName16= +OutputDefault16=0 +PageOptions16=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType17=Text Print +OutputName17=Text Print +OutputDocumentPath17= +OutputVariantName17= +OutputDefault17=0 +PageOptions17=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType18=Text Print +OutputName18=Text Print +OutputDocumentPath18= +OutputVariantName18= +OutputDefault18=0 +PageOptions18=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType19=Text Print +OutputName19=Text Print +OutputDocumentPath19= +OutputVariantName19= +OutputDefault19=0 +PageOptions19=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType20=Text Print +OutputName20=Text Print +OutputDocumentPath20= +OutputVariantName20= +OutputDefault20=0 +PageOptions20=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType21=Text Print +OutputName21=Text Print +OutputDocumentPath21= +OutputVariantName21= +OutputDefault21=0 +PageOptions21=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType22=Text Print +OutputName22=Text Print +OutputDocumentPath22= +OutputVariantName22= +OutputDefault22=0 +PageOptions22=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType23=Text Print +OutputName23=Text Print +OutputDocumentPath23= +OutputVariantName23= +OutputDefault23=0 +PageOptions23=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType24=Text Print +OutputName24=Text Print +OutputDocumentPath24= +OutputVariantName24= +OutputDefault24=0 +PageOptions24=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType25=Text Print +OutputName25=Text Print +OutputDocumentPath25= +OutputVariantName25= +OutputDefault25=0 +PageOptions25=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType26=Text Print +OutputName26=Text Print +OutputDocumentPath26= +OutputVariantName26= +OutputDefault26=0 +PageOptions26=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType27=Text Print +OutputName27=Text Print +OutputDocumentPath27= +OutputVariantName27= +OutputDefault27=0 +PageOptions27=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType28=Text Print +OutputName28=Text Print +OutputDocumentPath28= +OutputVariantName28= +OutputDefault28=0 +PageOptions28=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType29=Text Print +OutputName29=Text Print +OutputDocumentPath29= +OutputVariantName29= +OutputDefault29=0 +PageOptions29=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 + +[OutputGroup8] +Name=Validation Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=Component states check +OutputName1=Vault's components states check +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +OutputType2=Configuration compliance +OutputName2=Environment configuration compliance check +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +OutputType3=Design Rules Check +OutputName3=Design Rules Check +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType4=Differences Report +OutputName4=Differences Report +OutputDocumentPath4= +OutputVariantName4= +OutputDefault4=0 +PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType5=Electrical Rules Check +OutputName5=Electrical Rules Check +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 +PageOptions5=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType6=Footprint Comparison Report +OutputName6=Footprint Comparison Report +OutputDocumentPath6= +OutputVariantName6= +OutputDefault6=0 + +[OutputGroup9] +Name=Export Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=AutoCAD dwg/dxf PCB +OutputName1=AutoCAD dwg/dxf File PCB +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +OutputType2=AutoCAD dwg/dxf Schematic +OutputName2=AutoCAD dwg/dxf File Schematic +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +OutputType3=ExportIDF +OutputName3=Export IDF +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +OutputType4=ExportSTEP +OutputName4=Export STEP +OutputDocumentPath4= +OutputVariantName4=[No Variations] +OutputDefault4=0 +OutputType5=NetList Sch +OutputName5=NetList Sch +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 + +[Modification Levels] +Type1=1 +Type2=1 +Type3=1 +Type4=1 +Type5=1 +Type6=1 +Type7=1 +Type8=1 +Type9=1 +Type10=1 +Type11=1 +Type12=1 +Type13=1 +Type14=1 +Type15=1 +Type16=1 +Type17=1 +Type18=1 +Type19=1 +Type20=1 +Type21=1 +Type22=1 +Type23=1 +Type24=1 +Type25=1 +Type26=1 +Type27=1 +Type28=1 +Type29=1 +Type30=1 +Type31=1 +Type32=1 +Type33=1 +Type34=1 +Type35=1 +Type36=1 +Type37=1 +Type38=1 +Type39=1 +Type40=1 +Type41=1 +Type42=1 +Type43=1 +Type44=1 +Type45=1 +Type46=1 +Type47=1 +Type48=1 +Type49=1 +Type50=1 +Type51=1 +Type52=1 +Type53=1 +Type54=1 +Type55=1 +Type56=1 +Type57=1 +Type58=1 +Type59=1 +Type60=1 +Type61=1 +Type62=1 +Type63=1 +Type64=1 +Type65=1 +Type66=1 +Type67=1 +Type68=1 +Type69=1 +Type70=1 +Type71=1 +Type72=1 +Type73=1 +Type74=1 +Type75=1 +Type76=1 +Type77=1 +Type78=1 +Type79=1 +Type80=1 + +[Difference Levels] +Type1=1 +Type2=1 +Type3=1 +Type4=1 +Type5=1 +Type6=1 +Type7=1 +Type8=1 +Type9=1 +Type10=1 +Type11=1 +Type12=1 +Type13=1 +Type14=1 +Type15=1 +Type16=1 +Type17=1 +Type18=1 +Type19=1 +Type20=1 +Type21=1 +Type22=1 +Type23=1 +Type24=1 +Type25=1 +Type26=1 +Type27=1 +Type28=1 +Type29=1 +Type30=1 +Type31=1 +Type32=1 +Type33=1 +Type34=1 +Type35=1 +Type36=1 +Type37=1 +Type38=1 +Type39=1 +Type40=1 +Type41=1 +Type42=1 +Type43=1 +Type44=1 +Type45=1 + +[Electrical Rules Check] +Type1=1 +Type2=1 +Type3=2 +Type4=1 +Type5=2 +Type6=2 +Type7=1 +Type8=1 +Type9=1 +Type10=1 +Type11=2 +Type12=2 +Type13=2 +Type14=1 +Type15=1 +Type16=1 +Type17=1 +Type18=1 +Type19=1 +Type20=1 +Type21=1 +Type22=1 +Type23=1 +Type24=1 +Type25=2 +Type26=2 +Type27=2 +Type28=1 +Type29=1 +Type30=1 +Type31=1 +Type32=2 +Type33=2 +Type34=2 +Type35=1 +Type36=2 +Type37=1 +Type38=2 +Type39=2 +Type40=2 +Type41=0 +Type42=2 +Type43=1 +Type44=1 +Type45=2 +Type46=1 +Type47=2 +Type48=2 +Type49=1 +Type50=2 +Type51=1 +Type52=1 +Type53=1 +Type54=1 +Type55=1 +Type56=2 +Type57=1 +Type58=1 +Type59=2 +Type60=1 +Type61=2 +Type62=2 +Type63=1 +Type64=0 +Type65=2 +Type66=3 +Type67=2 +Type68=2 +Type69=2 +Type70=2 +Type71=2 +Type72=2 +Type73=2 +Type74=1 +Type75=2 +Type76=1 +Type77=1 +Type78=1 +Type79=1 +Type80=2 +Type81=3 +Type82=3 +Type83=3 +Type84=3 +Type85=3 +Type86=2 +Type87=2 +Type88=2 +Type89=1 +Type90=1 +Type91=3 +Type92=3 +Type93=2 +Type94=2 +Type95=2 +Type96=2 +Type97=2 +Type98=0 +Type99=1 +Type100=2 +Type101=1 +Type102=2 +Type103=2 +Type104=1 +Type105=2 +Type106=2 +Type107=2 +Type108=2 +Type109=1 +Type110=1 +Type111=1 + +[ERC Connection Matrix] +L1=NNNNNNNNNNNWNNNWW +L2=NNWNNNNWWWNWNWNWN +L3=NWEENEEEENEWNEEWN +L4=NNENNNWEENNWNENWN +L5=NNNNNNNNNNNNNNNNN +L6=NNENNNNEENNWNENWN +L7=NNEWNNWEENNWNENWN +L8=NWEENEENEEENNEENN +L9=NWEENEEEENEWNEEWW +L10=NWNNNNNENNEWNNEWN +L11=NNENNNNEEENWNENWN +L12=WWWWNWWNWWWNWWWNN +L13=NNNNNNNNNNNWNNNWW +L14=NWEENEEEENEWNEEWW +L15=NNENNNNEEENWNENWW +L16=WWWWNWWNWWWNWWWNW +L17=WNNNNNNNWNNNWWWWN + +[Annotate] +SortOrder=3 +SortLocation=0 +MatchParameter1=Comment +MatchStrictly1=1 +MatchParameter2=Library Reference +MatchStrictly2=1 +PhysicalNamingFormat=$Component_$RoomName +GlobalIndexSortOrder=3 +GlobalIndexSortLocation=0 + +[PrjClassGen] +CompClassManualEnabled=0 +CompClassManualRoomEnabled=0 +NetClassAutoBusEnabled=1 +NetClassAutoCompEnabled=0 +NetClassAutoNamedHarnessEnabled=0 +NetClassManualEnabled=1 +NetClassSeparateForBusSections=0 + +[LibraryUpdateOptions] +SelectedOnly=0 +UpdateVariants=1 +PartTypes=0 +FullReplace=1 +UpdateDesignatorLock=1 +UpdatePartIDLock=1 +PreserveParameterLocations=1 +PreserveParameterVisibility=1 +DoGraphics=1 +DoParameters=1 +DoModels=1 +AddParameters=0 +RemoveParameters=0 +AddModels=1 +RemoveModels=1 +UpdateCurrentModels=1 + +[DatabaseUpdateOptions] +SelectedOnly=0 +UpdateVariants=1 +PartTypes=0 + +[NetInfos] +Net1=NetName=VBUS|NetColor=$00FF6EFF +Net2=NetName=3V3|NetColor=$006E6EFF +Net3=NetName=GND|NetColor=$00FF6E6E + +[Comparison Options] +ComparisonOptions0=Kind=Net|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0 +ComparisonOptions1=Kind=Net Class|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0 +ComparisonOptions2=Kind=Component Class|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0 +ComparisonOptions3=Kind=Rule|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0 +ComparisonOptions4=Kind=Differential Pair|MinPercent=50|MinMatch=1|ShowMatch=0|Confirm=0|UseName=0|InclAllRules=0 +ComparisonOptions5=Kind=Code Memory|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0 + +[SmartPDF] +PageOptions=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 + diff --git a/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.PrjPcbStructure b/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.PrjPcbStructure new file mode 100755 index 0000000..5447661 --- /dev/null +++ b/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.PrjPcbStructure @@ -0,0 +1 @@ +Record=TopLevelDocument|FileName=GEX_Radio.SchDoc diff --git a/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.SchDoc b/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.SchDoc new file mode 100755 index 0000000..531fee2 Binary files /dev/null and b/GEX Radio Dongle (F103 NRF caster)/rev.1/GEX_Radio.SchDoc differ diff --git a/GEX Radio Dongle (F103 NRF caster)/rev.1/gerbers_oshpark.zip b/GEX Radio Dongle (F103 NRF caster)/rev.1/gerbers_oshpark.zip new file mode 100755 index 0000000..0d05e13 Binary files /dev/null and b/GEX Radio Dongle (F103 NRF caster)/rev.1/gerbers_oshpark.zip differ diff --git a/GEX Zero (F072)/README.md b/GEX Zero (F072)/README.md new file mode 100644 index 0000000..f8c7076 --- /dev/null +++ b/GEX Zero (F072)/README.md @@ -0,0 +1,56 @@ +GEX Zero +======== + +This form factor is designed to be mechanically compatible with the +Raspberry Pi Zero (W). This makes it possible to use PHATs and cases for the Pi Zero. + +Pins are mapped to the 20x2 header to maximize compatibility with PHATS. +Functions like UART, SPI and I2C should all be available. + +![render](gzrender.png) +![top](gztop.png) +![bot](gzb.png) + + +## Pin mapping + +### Main header + +```none + + 3V3 1 | 2 5V + PB7 3 | 4 5V + PB6 5 | 6 GND + PA8 7 | 8 PB10 + GND 9 | 10 PB11 + PB1 11 | 12 PB8 +PA10 13 | 14 GND + PB9 15 | 16 PA0 + 3V3 17 | 18 PA1 + PB5 19 | 20 GND + PB4 21 | 22 PA2 + PB3 23 | 24 PA3 + GND 25 | 26 PA4 + PB2 27 | 28 PA5 +PC10 29 | 30 GND +PC11 31 | 32 PA7 + PB0 33 | 34 GND +PB15 35 | 36 PA6 +PB12 37 | 38 PB14 + GND 39 | 40 PB13 + +``` + +### Small header + +GND, Debug TX (PA9), PA13, PA14 (SWD) + +## Radio interface + +This board has a position for NRF24L01+. + +The radio module uses one of the SPI ports as alternate functions on some otherwise unused PC pins. +PB12 and PB14 can only be used as regular GPIO when the radio link is enabled, not SPI. PB13 must be +left unconnected, as there is no available remap for the clock line. + +The radio module is used for remote control with the GEX Dongle and provides a fast, half duplex connection. diff --git a/GEX Zero (F072)/gzb.png b/GEX Zero (F072)/gzb.png new file mode 100755 index 0000000..4dff15d Binary files /dev/null and b/GEX Zero (F072)/gzb.png differ diff --git a/GEX Zero (F072)/gzrender.png b/GEX Zero (F072)/gzrender.png new file mode 100755 index 0000000..301c64e Binary files /dev/null and b/GEX Zero (F072)/gzrender.png differ diff --git a/GEX Zero (F072)/gztop.png b/GEX Zero (F072)/gztop.png new file mode 100755 index 0000000..7980f8a Binary files /dev/null and b/GEX Zero (F072)/gztop.png differ diff --git a/GEX Zero (F072)/rev.1/GEX_Zero.PcbDoc b/GEX Zero (F072)/rev.1/GEX_Zero.PcbDoc new file mode 100755 index 0000000..f2c9d75 Binary files /dev/null and b/GEX Zero (F072)/rev.1/GEX_Zero.PcbDoc differ diff --git a/GEX Zero (F072)/rev.1/GEX_Zero.PrjPcb b/GEX Zero (F072)/rev.1/GEX_Zero.PrjPcb new file mode 100755 index 0000000..c321540 --- /dev/null +++ b/GEX Zero (F072)/rev.1/GEX_Zero.PrjPcb @@ -0,0 +1,1383 @@ +[Design] +Version=1.0 +HierarchyMode=0 +ChannelRoomNamingStyle=0 +ReleasesFolder= +ReleaseVaultGUID= +ReleaseVaultName= +ChannelDesignatorFormatString=$Component_$RoomName +ChannelRoomLevelSeperator=_ +OpenOutputs=1 +ArchiveProject=0 +TimestampOutput=0 +SeparateFolders=0 +TemplateLocationPath= +PinSwapBy_Netlabel=1 +PinSwapBy_Pin=1 +AllowPortNetNames=0 +AllowSheetEntryNetNames=1 +AppendSheetNumberToLocalNets=0 +NetlistSinglePinNets=0 +DefaultConfiguration=Default Configuration +UserID=0xFFFFFFFF +DefaultPcbProtel=1 +DefaultPcbPcad=0 +ReorderDocumentsOnCompile=1 +NameNetsHierarchically=0 +PowerPortNamesTakePriority=0 +PushECOToAnnotationFile=1 +DItemRevisionGUID= +ReportSuppressedErrorsInMessages=0 +FSMCodingStyle=eFMSDropDownList_OneProcess +FSMEncodingStyle=eFMSDropDownList_OneHot +OutputPath= +LogFolderPath= +ManagedProjectGUID= + +[Preferences] +PrefsVaultGUID= +PrefsRevisionGUID= + +[Document1] +DocumentPath=GEX_Zero.PcbDoc +AnnotationEnabled=1 +AnnotateStartValue=1 +AnnotationIndexControlEnabled=0 +AnnotateSuffix= +AnnotateScope=All +AnnotateOrder=-1 +DoLibraryUpdate=1 +DoDatabaseUpdate=1 +ClassGenCCAutoEnabled=1 +ClassGenCCAutoRoomEnabled=1 +ClassGenNCAutoScope=None +DItemRevisionGUID= +GenerateClassCluster=0 +DocumentUniqueId=PLHEHHLL + +[Document2] +DocumentPath=GEX_Zero.SchDoc +AnnotationEnabled=1 +AnnotateStartValue=1 +AnnotationIndexControlEnabled=0 +AnnotateSuffix= +AnnotateScope=All +AnnotateOrder=0 +DoLibraryUpdate=1 +DoDatabaseUpdate=1 +ClassGenCCAutoEnabled=1 +ClassGenCCAutoRoomEnabled=1 +ClassGenNCAutoScope=None +DItemRevisionGUID= +GenerateClassCluster=0 +DocumentUniqueId=DMHYCNHM + +[GeneratedDocument1] +DocumentPath=Project Outputs for GEX_Zero\Design Rule Check - GEX_Zero.html +DItemRevisionGUID= + +[GeneratedDocument2] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.DRR +DItemRevisionGUID= + +[GeneratedDocument3] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.EXTREP +DItemRevisionGUID= + +[GeneratedDocument4] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.GBL +DItemRevisionGUID= + +[GeneratedDocument5] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.GBO +DItemRevisionGUID= + +[GeneratedDocument6] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.GBS +DItemRevisionGUID= + +[GeneratedDocument7] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.GM1 +DItemRevisionGUID= + +[GeneratedDocument8] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.GTL +DItemRevisionGUID= + +[GeneratedDocument9] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.GTO +DItemRevisionGUID= + +[GeneratedDocument10] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.GTS +DItemRevisionGUID= + +[GeneratedDocument11] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.LDP +DItemRevisionGUID= + +[GeneratedDocument12] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.REP +DItemRevisionGUID= + +[GeneratedDocument13] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.RUL +DItemRevisionGUID= + +[GeneratedDocument14] +DocumentPath=Project Outputs for GEX_Zero\GEX_Zero.TXT +DItemRevisionGUID= + +[Configuration1] +Name=Default Configuration +ParameterCount=0 +ConstraintFileCount=0 +ReleaseItemId= +CurrentRevision= +Variant=[No Variations] +OutputJobsCount=0 + +[OutputGroup1] +Name=Netlist Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=CadnetixNetlist +OutputName1=Cadnetix Netlist +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +OutputType2=CalayNetlist +OutputName2=Calay Netlist +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +OutputType3=EDIF +OutputName3=EDIF for PCB +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +OutputType4=EESofNetlist +OutputName4=EESof Netlist +OutputDocumentPath4= +OutputVariantName4= +OutputDefault4=0 +OutputType5=IntergraphNetlist +OutputName5=Intergraph Netlist +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 +OutputType6=MentorBoardStationNetlist +OutputName6=Mentor BoardStation Netlist +OutputDocumentPath6= +OutputVariantName6= +OutputDefault6=0 +OutputType7=MultiWire +OutputName7=MultiWire +OutputDocumentPath7= +OutputVariantName7= +OutputDefault7=0 +OutputType8=OrCadPCB2Netlist +OutputName8=Orcad/PCB2 Netlist +OutputDocumentPath8= +OutputVariantName8= +OutputDefault8=0 +OutputType9=PADSNetlist +OutputName9=PADS ASCII Netlist +OutputDocumentPath9= +OutputVariantName9= +OutputDefault9=0 +OutputType10=Pcad +OutputName10=Pcad for PCB +OutputDocumentPath10= +OutputVariantName10= +OutputDefault10=0 +OutputType11=PCADNetlist +OutputName11=PCAD Netlist +OutputDocumentPath11= +OutputVariantName11= +OutputDefault11=0 +OutputType12=PCADnltNetlist +OutputName12=PCADnlt Netlist +OutputDocumentPath12= +OutputVariantName12= +OutputDefault12=0 +OutputType13=Protel2Netlist +OutputName13=Protel2 Netlist +OutputDocumentPath13= +OutputVariantName13= +OutputDefault13=0 +OutputType14=ProtelNetlist +OutputName14=Protel +OutputDocumentPath14= +OutputVariantName14= +OutputDefault14=0 +OutputType15=RacalNetlist +OutputName15=Racal Netlist +OutputDocumentPath15= +OutputVariantName15= +OutputDefault15=0 +OutputType16=RINFNetlist +OutputName16=RINF Netlist +OutputDocumentPath16= +OutputVariantName16= +OutputDefault16=0 +OutputType17=SciCardsNetlist +OutputName17=SciCards Netlist +OutputDocumentPath17= +OutputVariantName17= +OutputDefault17=0 +OutputType18=TangoNetlist +OutputName18=Tango Netlist +OutputDocumentPath18= +OutputVariantName18= +OutputDefault18=0 +OutputType19=TelesisNetlist +OutputName19=Telesis Netlist +OutputDocumentPath19= +OutputVariantName19= +OutputDefault19=0 +OutputType20=Verilog +OutputName20=Verilog File +OutputDocumentPath20= +OutputVariantName20= +OutputDefault20=0 +OutputType21=VHDL +OutputName21=VHDL File +OutputDocumentPath21= +OutputVariantName21= +OutputDefault21=0 +OutputType22=WireListNetlist +OutputName22=WireList Netlist +OutputDocumentPath22= +OutputVariantName22= +OutputDefault22=0 +OutputType23=XSpiceNetlist +OutputName23=XSpice Netlist +OutputDocumentPath23= +OutputVariantName23= +OutputDefault23=0 + +[OutputGroup2] +Name=Simulator Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=AdvSimNetlist +OutputName1=Mixed Sim +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 + +[OutputGroup3] +Name=Documentation Outputs +Description= +TargetPrinter=Virtual Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=Assembler Source Print +OutputName1=Assembler Source Prints +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType2=C Source Print +OutputName2=C Source Prints +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +PageOptions2=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType3=C/C++ Header Print +OutputName3=C/C++ Header Prints +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType4=C++ Source Print +OutputName4=C++ Source Prints +OutputDocumentPath4= +OutputVariantName4= +OutputDefault4=0 +PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType5=Composite +OutputName5=Composite Drawing +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 +PageOptions5=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType6=FSM Print +OutputName6=FSM Prints +OutputDocumentPath6= +OutputVariantName6= +OutputDefault6=0 +PageOptions6=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType7=OpenBus Print +OutputName7=OpenBus Prints +OutputDocumentPath7= +OutputVariantName7= +OutputDefault7=0 +PageOptions7=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType8=PCB 3D Print +OutputName8=PCB 3D Print +OutputDocumentPath8= +OutputVariantName8=[No Variations] +OutputDefault8=0 +PageOptions8=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType9=PCB 3D Video +OutputName9=PCB 3D Video +OutputDocumentPath9= +OutputVariantName9=[No Variations] +OutputDefault9=0 +PageOptions9=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType10=PCB Print +OutputName10=PCB Prints +OutputDocumentPath10= +OutputVariantName10= +OutputDefault10=0 +PageOptions10=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType11=PCBDrawing +OutputName11=Draftsman +OutputDocumentPath11= +OutputVariantName11= +OutputDefault11=0 +PageOptions11=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType12=PCBLIB Print +OutputName12=PCBLIB Prints +OutputDocumentPath12= +OutputVariantName12= +OutputDefault12=0 +PageOptions12=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType13=PDF3D +OutputName13=PDF3D +OutputDocumentPath13= +OutputVariantName13=[No Variations] +OutputDefault13=0 +PageOptions13=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType14=Report Print +OutputName14=Report Prints +OutputDocumentPath14= +OutputVariantName14= +OutputDefault14=0 +PageOptions14=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType15=Schematic Print +OutputName15=Schematic Prints +OutputDocumentPath15= +OutputVariantName15= +OutputDefault15=0 +PageOptions15=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType16=SimView Print +OutputName16=SimView Prints +OutputDocumentPath16= +OutputVariantName16= +OutputDefault16=0 +PageOptions16=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType17=VHDL Print +OutputName17=VHDL Prints +OutputDocumentPath17= +OutputVariantName17= +OutputDefault17=0 +PageOptions17=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType18=Wave Print +OutputName18=Wave Prints +OutputDocumentPath18= +OutputVariantName18= +OutputDefault18=0 +PageOptions18=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType19=WaveSim Print +OutputName19=WaveSim Prints +OutputDocumentPath19= +OutputVariantName19= +OutputDefault19=0 +PageOptions19=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 + +[OutputGroup4] +Name=Assembly Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=Assembly +OutputName1=Assembly Drawings +OutputDocumentPath1= +OutputVariantName1=[No Variations] +OutputDefault1=0 +PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType2=Pick Place +OutputName2=Generates pick and place files +OutputDocumentPath2= +OutputVariantName2=[No Variations] +OutputDefault2=0 +OutputType3=Test Points For Assembly +OutputName3=Test Point Report +OutputDocumentPath3= +OutputVariantName3=[No Variations] +OutputDefault3=0 + +[OutputGroup5] +Name=Fabrication Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=CompositeDrill +OutputName1=Composite Drill Drawing +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType2=Drill +OutputName2=Drill Drawing/Guides +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +PageOptions2=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType3=Board Stack Report +OutputName3=Report Board Stack +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType4=Final +OutputName4=Final Artwork Prints +OutputDocumentPath4= +OutputVariantName4=[No Variations] +OutputDefault4=0 +PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType5=Gerber X2 +OutputName5=Gerber X2 Files +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 +OutputType6=ODB +OutputName6=ODB++ Files +OutputDocumentPath6= +OutputVariantName6=[No Variations] +OutputDefault6=0 +OutputType7=Mask +OutputName7=Solder/Paste Mask Prints +OutputDocumentPath7= +OutputVariantName7= +OutputDefault7=0 +PageOptions7=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType8=NC Drill +OutputName8=NC Drill Files +OutputDocumentPath8= +OutputVariantName8= +OutputDefault8=0 +Configuration8_Name1=OutputConfigurationParameter1 +Configuration8_Item1=BoardEdgeRoutToolDia=2000000|GenerateBoardEdgeRout=False|GenerateDrilledSlotsG85=False|GenerateEIADrillFile=False|GenerateSeparatePlatedNonPlatedFiles=False|NumberOfDecimals=5|NumberOfUnits=2|OptimizeChangeLocationCommands=True|OriginPosition=Relative|Record=DrillView|Units=Imperial|ZeroesMode=SuppressTrailingZeroes +OutputType9=IPC2581 +OutputName9=IPC-2581 Files +OutputDocumentPath9= +OutputVariantName9= +OutputDefault9=0 +OutputType10=Plane +OutputName10=Power-Plane Prints +OutputDocumentPath10= +OutputVariantName10= +OutputDefault10=0 +PageOptions10=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType11=Test Points +OutputName11=Test Point Report +OutputDocumentPath11= +OutputVariantName11= +OutputDefault11=0 +OutputType12=Gerber +OutputName12=Gerber Files +OutputDocumentPath12= +OutputVariantName12=[No Variations] +OutputDefault12=0 +Configuration12_Name1=OutputConfigurationParameter1 +Configuration12_Item1=AddToAllLayerClasses.Set= |AddToAllPlots.Set=SerializeLayerHash.Version~2,ClassName~TLayerToBoolean|CentrePlots=False|DrillDrawingSymbol=GraphicsSymbol|DrillDrawingSymbolSize=200000|EmbeddedApertures=True|FilmBorderSize=10000000|FilmXSize=200000000|FilmYSize=160000000|FlashAllFills=False|FlashPadShapes=True|G54OnApertureChange=False|GenerateDRCRulesFile=True|GenerateDRCRulesFile=True|GenerateReliefShapes=True|GerberUnit=Imperial|GerberUnit=Imperial|IncludeUnconnectedMidLayerPads=False|LayerClassesMirror.Set= |LayerClassesPlot.Set= |LeadingAndTrailingZeroesMode=SuppressLeadingZeroes|MaxApertureSize=2500000|MinusApertureTolerance=50|MinusApertureTolerance=50|Mirror.Set=SerializeLayerHash.Version~2,ClassName~TLayerToBoolean|MirrorDrillDrawingPlots=False|MirrorDrillGuidePlots=False|NoRegularPolygons=False|NumberOfDecimals=5|NumberOfDecimals=5|OptimizeChangeLocationCommands=True|OptimizeChangeLocationCommands=True|OriginPosition=Relative|Panelize=False|Plot.Set=SerializeLayerHash.Version~2,ClassName~TLayerToBoolean,16973830~1,16973834~1,16777217~1,16842751~1,16973835~1,16973831~1,16908289~1|PlotPositivePlaneLayers=False|PlotUsedDrillDrawingLayerPairs=False|PlotUsedDrillGuideLayerPairs=False|PlusApertureTolerance=50|PlusApertureTolerance=50|Record=GerberView|SoftwareArcs=False|Sorted=False|Sorted=False + +[OutputGroup6] +Name=Report Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=BOM_PartType +OutputName1=Bill of Materials +OutputDocumentPath1= +OutputVariantName1=[No Variations] +OutputDefault1=0 +PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType2=ComponentCrossReference +OutputName2=Component Cross Reference Report +OutputDocumentPath2= +OutputVariantName2=[No Variations] +OutputDefault2=0 +OutputType3=ReportHierarchy +OutputName3=Report Project Hierarchy +OutputDocumentPath3= +OutputVariantName3=[No Variations] +OutputDefault3=0 +OutputType4=Script +OutputName4=Script Output +OutputDocumentPath4= +OutputVariantName4=[No Variations] +OutputDefault4=0 +OutputType5=SimpleBOM +OutputName5=Simple BOM +OutputDocumentPath5= +OutputVariantName5=[No Variations] +OutputDefault5=0 +OutputType6=SinglePinNetReporter +OutputName6=Report Single Pin Nets +OutputDocumentPath6= +OutputVariantName6=[No Variations] +OutputDefault6=0 + +[OutputGroup7] +Name=Other Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=Text Print +OutputName1=Text Print +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType2=Text Print +OutputName2=Text Print +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +PageOptions2=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType3=Text Print +OutputName3=Text Print +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType4=Text Print +OutputName4=Text Print +OutputDocumentPath4= +OutputVariantName4= +OutputDefault4=0 +PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType5=Text Print +OutputName5=Text Print +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 +PageOptions5=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType6=Text Print +OutputName6=Text Print +OutputDocumentPath6= +OutputVariantName6= +OutputDefault6=0 +PageOptions6=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType7=Text Print +OutputName7=Text Print +OutputDocumentPath7= +OutputVariantName7= +OutputDefault7=0 +PageOptions7=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType8=Text Print +OutputName8=Text Print +OutputDocumentPath8= +OutputVariantName8= +OutputDefault8=0 +PageOptions8=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType9=Text Print +OutputName9=Text Print +OutputDocumentPath9= +OutputVariantName9= +OutputDefault9=0 +PageOptions9=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType10=Text Print +OutputName10=Text Print +OutputDocumentPath10= +OutputVariantName10= +OutputDefault10=0 +PageOptions10=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType11=Text Print +OutputName11=Text Print +OutputDocumentPath11= +OutputVariantName11= +OutputDefault11=0 +PageOptions11=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType12=Text Print +OutputName12=Text Print +OutputDocumentPath12= +OutputVariantName12= +OutputDefault12=0 +PageOptions12=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType13=Text Print +OutputName13=Text Print +OutputDocumentPath13= +OutputVariantName13= +OutputDefault13=0 +PageOptions13=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType14=Text Print +OutputName14=Text Print +OutputDocumentPath14= +OutputVariantName14= +OutputDefault14=0 +PageOptions14=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType15=Text Print +OutputName15=Text Print +OutputDocumentPath15= +OutputVariantName15= +OutputDefault15=0 +PageOptions15=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType16=Text Print +OutputName16=Text Print +OutputDocumentPath16= +OutputVariantName16= +OutputDefault16=0 +PageOptions16=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType17=Text Print +OutputName17=Text Print +OutputDocumentPath17= +OutputVariantName17= +OutputDefault17=0 +PageOptions17=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType18=Text Print +OutputName18=Text Print +OutputDocumentPath18= +OutputVariantName18= +OutputDefault18=0 +PageOptions18=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType19=Text Print +OutputName19=Text Print +OutputDocumentPath19= +OutputVariantName19= +OutputDefault19=0 +PageOptions19=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType20=Text Print +OutputName20=Text Print +OutputDocumentPath20= +OutputVariantName20= +OutputDefault20=0 +PageOptions20=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType21=Text Print +OutputName21=Text Print +OutputDocumentPath21= +OutputVariantName21= +OutputDefault21=0 +PageOptions21=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType22=Text Print +OutputName22=Text Print +OutputDocumentPath22= +OutputVariantName22= +OutputDefault22=0 +PageOptions22=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType23=Text Print +OutputName23=Text Print +OutputDocumentPath23= +OutputVariantName23= +OutputDefault23=0 +PageOptions23=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType24=Text Print +OutputName24=Text Print +OutputDocumentPath24= +OutputVariantName24= +OutputDefault24=0 +PageOptions24=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType25=Text Print +OutputName25=Text Print +OutputDocumentPath25= +OutputVariantName25= +OutputDefault25=0 +PageOptions25=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType26=Text Print +OutputName26=Text Print +OutputDocumentPath26= +OutputVariantName26= +OutputDefault26=0 +PageOptions26=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType27=Text Print +OutputName27=Text Print +OutputDocumentPath27= +OutputVariantName27= +OutputDefault27=0 +PageOptions27=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType28=Text Print +OutputName28=Text Print +OutputDocumentPath28= +OutputVariantName28= +OutputDefault28=0 +PageOptions28=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType29=Text Print +OutputName29=Text Print +OutputDocumentPath29= +OutputVariantName29= +OutputDefault29=0 +PageOptions29=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 + +[OutputGroup8] +Name=Validation Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=Component states check +OutputName1=Vault's components states check +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +OutputType2=Configuration compliance +OutputName2=Environment configuration compliance check +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +OutputType3=Design Rules Check +OutputName3=Design Rules Check +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType4=Differences Report +OutputName4=Differences Report +OutputDocumentPath4= +OutputVariantName4= +OutputDefault4=0 +PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType5=Electrical Rules Check +OutputName5=Electrical Rules Check +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 +PageOptions5=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 +OutputType6=Footprint Comparison Report +OutputName6=Footprint Comparison Report +OutputDocumentPath6= +OutputVariantName6= +OutputDefault6=0 + +[OutputGroup9] +Name=Export Outputs +Description= +TargetPrinter=Bullzip PDF Printer +PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1 +OutputType1=AutoCAD dwg/dxf PCB +OutputName1=AutoCAD dwg/dxf File PCB +OutputDocumentPath1= +OutputVariantName1= +OutputDefault1=0 +OutputType2=AutoCAD dwg/dxf Schematic +OutputName2=AutoCAD dwg/dxf File Schematic +OutputDocumentPath2= +OutputVariantName2= +OutputDefault2=0 +OutputType3=ExportIDF +OutputName3=Export IDF +OutputDocumentPath3= +OutputVariantName3= +OutputDefault3=0 +OutputType4=ExportSTEP +OutputName4=Export STEP +OutputDocumentPath4= +OutputVariantName4=[No Variations] +OutputDefault4=0 +OutputType5=NetList Sch +OutputName5=NetList Sch +OutputDocumentPath5= +OutputVariantName5= +OutputDefault5=0 + +[Modification Levels] +Type1=1 +Type2=1 +Type3=1 +Type4=1 +Type5=1 +Type6=1 +Type7=1 +Type8=1 +Type9=1 +Type10=1 +Type11=1 +Type12=1 +Type13=1 +Type14=1 +Type15=1 +Type16=1 +Type17=1 +Type18=1 +Type19=1 +Type20=1 +Type21=1 +Type22=1 +Type23=1 +Type24=1 +Type25=1 +Type26=1 +Type27=1 +Type28=1 +Type29=1 +Type30=1 +Type31=1 +Type32=1 +Type33=1 +Type34=1 +Type35=1 +Type36=1 +Type37=1 +Type38=1 +Type39=1 +Type40=1 +Type41=1 +Type42=1 +Type43=1 +Type44=1 +Type45=1 +Type46=1 +Type47=1 +Type48=1 +Type49=1 +Type50=1 +Type51=1 +Type52=1 +Type53=1 +Type54=1 +Type55=1 +Type56=1 +Type57=1 +Type58=1 +Type59=1 +Type60=1 +Type61=1 +Type62=1 +Type63=1 +Type64=1 +Type65=1 +Type66=1 +Type67=1 +Type68=1 +Type69=1 +Type70=1 +Type71=1 +Type72=1 +Type73=1 +Type74=1 +Type75=1 +Type76=1 +Type77=1 +Type78=1 +Type79=1 +Type80=1 + +[Difference Levels] +Type1=1 +Type2=1 +Type3=1 +Type4=1 +Type5=1 +Type6=1 +Type7=1 +Type8=1 +Type9=1 +Type10=1 +Type11=1 +Type12=1 +Type13=1 +Type14=1 +Type15=1 +Type16=1 +Type17=1 +Type18=1 +Type19=1 +Type20=1 +Type21=1 +Type22=1 +Type23=1 +Type24=1 +Type25=1 +Type26=1 +Type27=1 +Type28=1 +Type29=1 +Type30=1 +Type31=1 +Type32=1 +Type33=1 +Type34=1 +Type35=1 +Type36=1 +Type37=1 +Type38=1 +Type39=1 +Type40=1 +Type41=1 +Type42=1 +Type43=1 +Type44=1 +Type45=1 + +[Electrical Rules Check] +Type1=1 +Type2=1 +Type3=2 +Type4=1 +Type5=2 +Type6=2 +Type7=1 +Type8=1 +Type9=1 +Type10=1 +Type11=2 +Type12=2 +Type13=2 +Type14=1 +Type15=1 +Type16=1 +Type17=1 +Type18=1 +Type19=1 +Type20=1 +Type21=1 +Type22=1 +Type23=1 +Type24=1 +Type25=2 +Type26=2 +Type27=2 +Type28=1 +Type29=1 +Type30=1 +Type31=1 +Type32=2 +Type33=2 +Type34=2 +Type35=1 +Type36=2 +Type37=1 +Type38=2 +Type39=2 +Type40=2 +Type41=0 +Type42=2 +Type43=1 +Type44=1 +Type45=2 +Type46=1 +Type47=2 +Type48=2 +Type49=1 +Type50=2 +Type51=1 +Type52=1 +Type53=1 +Type54=1 +Type55=1 +Type56=2 +Type57=1 +Type58=1 +Type59=2 +Type60=1 +Type61=2 +Type62=2 +Type63=1 +Type64=0 +Type65=2 +Type66=3 +Type67=2 +Type68=2 +Type69=2 +Type70=2 +Type71=2 +Type72=2 +Type73=2 +Type74=1 +Type75=2 +Type76=1 +Type77=1 +Type78=1 +Type79=1 +Type80=2 +Type81=3 +Type82=3 +Type83=3 +Type84=3 +Type85=3 +Type86=2 +Type87=2 +Type88=2 +Type89=1 +Type90=1 +Type91=3 +Type92=3 +Type93=2 +Type94=2 +Type95=2 +Type96=2 +Type97=2 +Type98=0 +Type99=1 +Type100=2 +Type101=1 +Type102=2 +Type103=2 +Type104=1 +Type105=2 +Type106=2 +Type107=2 +Type108=2 +Type109=1 +Type110=1 +Type111=1 + +[ERC Connection Matrix] +L1=NNNNNNNNNNNWNNNWW +L2=NNWNNNNWWWNWNWNWN +L3=NWEENEEEENEWNEEWN +L4=NNENNNWEENNWNENWN +L5=NNNNNNNNNNNNNNNNN +L6=NNENNNNEENNWNENWN +L7=NNEWNNWEENNWNENWN +L8=NWEENEENEEENNEENN +L9=NWEENEEEENEWNEEWW +L10=NWNNNNNENNEWNNEWN +L11=NNENNNNEEENWNENWN +L12=WWWWNWWNWWWNWWWNN +L13=NNNNNNNNNNNWNNNWW +L14=NWEENEEEENEWNEEWW +L15=NNENNNNEEENWNENWW +L16=WWWWNWWNWWWNWWWNW +L17=WNNNNNNNWNNNWWWWN + +[Annotate] +SortOrder=3 +SortLocation=0 +MatchParameter1=Comment +MatchStrictly1=1 +MatchParameter2=Library Reference +MatchStrictly2=1 +PhysicalNamingFormat=$Component_$RoomName +GlobalIndexSortOrder=3 +GlobalIndexSortLocation=0 + +[PrjClassGen] +CompClassManualEnabled=0 +CompClassManualRoomEnabled=0 +NetClassAutoBusEnabled=1 +NetClassAutoCompEnabled=0 +NetClassAutoNamedHarnessEnabled=0 +NetClassManualEnabled=1 +NetClassSeparateForBusSections=0 + +[LibraryUpdateOptions] +SelectedOnly=0 +UpdateVariants=1 +PartTypes=0 +ComponentLibIdentifierKind0=Library Name And Type +ComponentLibraryIdentifier0=ABU_standard.SchLib +ComponentDesignItemID0=BSS84 +ComponentSymbolReference0=BSS84 +ComponentUpdate0=0 +ComponentIsDeviceSheet0=0 +ComponentLibIdentifierKind1=Library Name And Type +ComponentLibraryIdentifier1=ABU_standard.SchLib +ComponentDesignItemID1=C +ComponentSymbolReference1=C +ComponentUpdate1=0 +ComponentIsDeviceSheet1=0 +ComponentLibIdentifierKind2=Library Name And Type +ComponentLibraryIdentifier2=ABU_standard.SchLib +ComponentDesignItemID2=JUMP +ComponentSymbolReference2=JUMP +ComponentUpdate2=0 +ComponentIsDeviceSheet2=0 +ComponentLibIdentifierKind3=Library Name And Type +ComponentLibraryIdentifier3=ABU_standard.SchLib +ComponentDesignItemID3=L +ComponentSymbolReference3=L +ComponentUpdate3=0 +ComponentIsDeviceSheet3=0 +ComponentLibIdentifierKind4=Library Name And Type +ComponentLibraryIdentifier4=ABU_standard.SchLib +ComponentDesignItemID4=LED +ComponentSymbolReference4=LED +ComponentUpdate4=0 +ComponentIsDeviceSheet4=0 +ComponentLibIdentifierKind5=Library Name And Type +ComponentLibraryIdentifier5=ABU_standard.SchLib +ComponentDesignItemID5=R +ComponentSymbolReference5=R +ComponentUpdate5=0 +ComponentIsDeviceSheet5=0 +ComponentLibIdentifierKind6=Library Name And Type +ComponentLibraryIdentifier6=ABU_standard.SchLib +ComponentDesignItemID6=XTALL +ComponentSymbolReference6=XTALL +ComponentUpdate6=0 +ComponentIsDeviceSheet6=0 +ComponentLibIdentifierKind7=Library Name And Type +ComponentLibraryIdentifier7=CONN.SchLib +ComponentDesignItemID7=USB_Micro_TypeB_Molex_105017 +ComponentSymbolReference7=USB_Micro_TypeB_Molex_105017 +ComponentUpdate7=0 +ComponentIsDeviceSheet7=0 +ComponentLibIdentifierKind8=Library Name And Type +ComponentLibraryIdentifier8=CUSTOM.SchLib +ComponentDesignItemID8=MCP1603 +ComponentSymbolReference8=MCP1603 +ComponentUpdate8=0 +ComponentIsDeviceSheet8=0 +ComponentLibIdentifierKind9=Library Name And Type +ComponentLibraryIdentifier9=CUSTOM.SchLib +ComponentDesignItemID9=NRF_MINI +ComponentSymbolReference9=NRF_MINI +ComponentUpdate9=0 +ComponentIsDeviceSheet9=0 +ComponentLibIdentifierKind10=Library Name And Type +ComponentLibraryIdentifier10=CUSTOM.SchLib +ComponentDesignItemID10=STM32F072RBT6 +ComponentSymbolReference10=STM32F072RBT6 +ComponentUpdate10=0 +ComponentIsDeviceSheet10=0 +ComponentLibIdentifierKind11=Library Name And Type +ComponentLibraryIdentifier11=CUSTOM.SchLib +ComponentDesignItemID11=SW_SPST_4PAD +ComponentSymbolReference11=SW_SPST_4PAD +ComponentUpdate11=1 +ComponentIsDeviceSheet11=0 +ComponentLibIdentifierKind12=Library Name And Type +ComponentLibraryIdentifier12=CUSTOM.SchLib +ComponentDesignItemID12=USBLC6_ESD +ComponentSymbolReference12=USBLC6_ESD +ComponentUpdate12=0 +ComponentIsDeviceSheet12=0 +ComponentLibIdentifierKind13=Library Name And Type +ComponentLibraryIdentifier13=Miscellaneous Connectors.IntLib +ComponentDesignItemID13=Header 20X2 +ComponentSymbolReference13=Header 20X2 +ComponentUpdate13=0 +ComponentIsDeviceSheet13=0 +ComponentLibIdentifierKind14=Library Name And Type +ComponentLibraryIdentifier14=Miscellaneous Connectors.IntLib +ComponentDesignItemID14=Header 2X2 +ComponentSymbolReference14=Header 2X2 +ComponentUpdate14=0 +ComponentIsDeviceSheet14=0 +FullReplace=1 +UpdateDesignatorLock=1 +UpdatePartIDLock=1 +PreserveParameterLocations=1 +PreserveParameterVisibility=1 +DoGraphics=1 +DoParameters=1 +DoModels=1 +AddParameters=0 +RemoveParameters=0 +AddModels=1 +RemoveModels=1 +UpdateCurrentModels=1 +ParameterName0=Comment +ParameterUpdate0=1 +ParameterName1=Component Kind +ParameterUpdate1=1 +ParameterName2=Description +ParameterUpdate2=1 +ParameterName3=HelpURL +ParameterUpdate3=1 +ParameterName4=LatestRevisionDate +ParameterUpdate4=1 +ParameterName5=LatestRevisionNote +ParameterUpdate5=1 +ParameterName6=Library Reference +ParameterUpdate6=1 +ParameterName7=Model +ParameterUpdate7=1 +ParameterName8=Package +ParameterUpdate8=1 +ParameterName9=Package / Case +ParameterUpdate9=1 +ParameterName10=Part number +ParameterUpdate10=1 +ParameterName11=Publisher +ParameterUpdate11=1 +ParameterName12=Supplier 1 +ParameterUpdate12=1 +ParameterName13=Supplier 2 +ParameterUpdate13=1 +ParameterName14=Supplier Part Number 1 +ParameterUpdate14=1 +ParameterName15=Supplier Part Number 2 +ParameterUpdate15=1 +ParameterName16=Value +ParameterUpdate16=1 +ModelTypeGroup0=PCBLIB +ModelTypeUpdate0=1 +ModelType0=PCBLIB +ModelName0=0805_SolderShort +ModelUpdate0=1 +ModelType1=PCBLIB +ModelName1=0805_SolderShort_2 +ModelUpdate1=1 +ModelType2=PCBLIB +ModelName2=AXIAL-0.3S +ModelUpdate2=1 +ModelType3=PCBLIB +ModelName3=AXIAL-0.5L +ModelUpdate3=1 +ModelType4=PCBLIB +ModelName4=C0805 +ModelUpdate4=1 +ModelType5=PCBLIB +ModelName5=C1206 +ModelUpdate5=1 +ModelType6=PCBLIB +ModelName6=CC5750-2220 +ModelUpdate6=1 +ModelType7=PCBLIB +ModelName7=HDR2X2 +ModelUpdate7=1 +ModelType8=PCBLIB +ModelName8=HDR2X20 +ModelUpdate8=1 +ModelType9=PCBLIB +ModelName9=JUMP_2 +ModelUpdate9=1 +ModelType10=PCBLIB +ModelName10=L_3x3 +ModelUpdate10=1 +ModelType11=PCBLIB +ModelName11=LED SMD PLCC-4 +ModelUpdate11=1 +ModelType12=PCBLIB +ModelName12=LED SMD PLCC-4_AAAC +ModelUpdate12=1 +ModelType13=PCBLIB +ModelName13=LED_3mm +ModelUpdate13=1 +ModelType14=PCBLIB +ModelName14=LED_3mm_90deg +ModelUpdate14=1 +ModelType15=PCBLIB +ModelName15=LED_5mm +ModelUpdate15=1 +ModelType16=PCBLIB +ModelName16=LED_SMD +ModelUpdate16=1 +ModelType17=PCBLIB +ModelName17=LQFP64 +ModelUpdate17=1 +ModelType18=PCBLIB +ModelName18=NRF_MINI +ModelUpdate18=1 +ModelType19=PCBLIB +ModelName19=PIN_2x2 +ModelUpdate19=1 +ModelType20=PCBLIB +ModelName20=PIN_2x20 +ModelUpdate20=1 +ModelType21=PCBLIB +ModelName21=R Shunt S-2 +ModelUpdate21=1 +ModelType22=PCBLIB +ModelName22=R0805 +ModelUpdate22=1 +ModelType23=PCBLIB +ModelName23=R0805_SHORTABLE +ModelUpdate23=1 +ModelType24=PCBLIB +ModelName24=R0805_SHORTABLE/jumper +ModelUpdate24=1 +ModelType25=PCBLIB +ModelName25=R0805_testpin +ModelUpdate25=1 +ModelType26=PCBLIB +ModelName26=R0805_trimr +ModelUpdate26=1 +ModelType27=PCBLIB +ModelName27=R1206 +ModelUpdate27=1 +ModelType28=PCBLIB +ModelName28=R1210 +ModelUpdate28=1 +ModelType29=PCBLIB +ModelName29=SOT23 +ModelUpdate29=1 +ModelType30=PCBLIB +ModelName30=SOT23-5 +ModelUpdate30=1 +ModelType31=PCBLIB +ModelName31=SOT23-6 +ModelUpdate31=1 +ModelType32=PCBLIB +ModelName32=SW_TINY_4PAD +ModelUpdate32=1 +ModelType33=PCBLIB +ModelName33=TURTLE_BTN +ModelUpdate33=1 +ModelType34=PCBLIB +ModelName34=USB_Micro-B_AFCI_10118194 +ModelUpdate34=1 +ModelType35=PCBLIB +ModelName35=USB_Micro-B_Molex_105017 +ModelUpdate35=1 +ModelType36=PCBLIB +ModelName36=XTAL-SMD-50-32 +ModelUpdate36=1 +ModelTypeGroup1=SI +ModelTypeUpdate1=1 +ModelType37=SI +ModelName37=Connector +ModelUpdate37=1 + +[DatabaseUpdateOptions] +SelectedOnly=0 +UpdateVariants=1 +PartTypes=0 + +[NetInfos] +Net1=NetName=PA7|NetColor=clYellow +Net2=NetName=5V|NetColor=$006E6EFF +Net3=NetName=PB0|NetColor=clYellow +Net4=NetName=PB6|NetColor=clYellow +Net5=NetName=PA6|NetColor=clYellow +Net6=NetName=PB12|NetColor=clYellow +Net7=NetName=PB3|NetColor=clYellow +Net8=NetName=PB10|NetColor=clYellow +Net9=NetName=PA2|NetColor=clYellow +Net10=NetName=PA5|NetColor=clYellow +Net11=NetName=DEBUG_TX|NetColor=clYellow +Net12=NetName=DM|NetColor=$00FF6EFF +Net13=NetName=GND|NetColor=$00FF6E6E +Net14=NetName=PB4|NetColor=clYellow +Net15=NetName=DP|NetColor=$00FF6EFF +Net16=NetName=NetP2_2|NetColor=$00FF6EFF +Net17=NetName=PB9|NetColor=clYellow +Net18=NetName=PC10|NetColor=clYellow +Net19=NetName=PB11|NetColor=clYellow +Net20=NetName=N_IRQ|NetColor=$006EFF6E +Net21=NetName=N_MISO|NetColor=$006EFF6E +Net22=NetName=N_NSS|NetColor=$006EFF6E +Net23=NetName=N_RESET|NetColor=$006EFF6E +Net24=NetName=PB7|NetColor=clYellow +Net25=NetName=USB_N|NetColor=$00FF6EFF +Net26=NetName=PB14|NetColor=clYellow +Net27=NetName=USB_P|NetColor=$00FF6EFF +Net28=NetName=PA3|NetColor=clYellow +Net29=NetName=PB8|NetColor=clYellow +Net30=NetName=N_CE|NetColor=$006EFF6E +Net31=NetName=PA13|NetColor=clYellow +Net32=NetName=PA0|NetColor=clYellow +Net33=NetName=N_MOSI|NetColor=$006EFF6E +Net34=NetName=3V3|NetColor=$006E6EFF +Net35=NetName=PA1|NetColor=clYellow +Net36=NetName=N_SCK|NetColor=clYellow +Net37=NetName=PC11|NetColor=clYellow +Net38=NetName=PB1|NetColor=clYellow +Net39=NetName=PB5|NetColor=clYellow +Net40=NetName=DP_P|NetColor=$00FF6EFF +Net41=NetName=NetP2_3|NetColor=$00FF6EFF +Net42=NetName=DM_N|NetColor=$00FF6EFF +Net43=NetName=PA14|NetColor=clYellow +Net44=NetName=PA8|NetColor=clYellow +Net45=NetName=PA4|NetColor=clYellow +Net46=NetName=PB15|NetColor=clYellow +Net47=NetName=PA10|NetColor=clYellow +Net48=NetName=PB2|NetColor=clYellow + +[Comparison Options] +ComparisonOptions0=Kind=Net|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0 +ComparisonOptions1=Kind=Net Class|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0 +ComparisonOptions2=Kind=Component Class|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0 +ComparisonOptions3=Kind=Rule|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0 +ComparisonOptions4=Kind=Differential Pair|MinPercent=50|MinMatch=1|ShowMatch=0|Confirm=0|UseName=0|InclAllRules=0 +ComparisonOptions5=Kind=Code Memory|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0 + +[SmartPDF] +PageOptions=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9 + diff --git a/GEX Zero (F072)/rev.1/GEX_Zero.PrjPcbStructure b/GEX Zero (F072)/rev.1/GEX_Zero.PrjPcbStructure new file mode 100755 index 0000000..58e0ebd --- /dev/null +++ b/GEX Zero (F072)/rev.1/GEX_Zero.PrjPcbStructure @@ -0,0 +1 @@ +Record=TopLevelDocument|FileName=GEX_Zero.SchDoc diff --git a/GEX Zero (F072)/rev.1/GEX_Zero.SchDoc b/GEX Zero (F072)/rev.1/GEX_Zero.SchDoc new file mode 100755 index 0000000..007a6c4 Binary files /dev/null and b/GEX Zero (F072)/rev.1/GEX_Zero.SchDoc differ diff --git a/f072-hub-r.1/README.md b/f072-hub-r.1/README.md deleted file mode 100644 index 8bb4aef..0000000 --- a/f072-hub-r.1/README.md +++ /dev/null @@ -1,22 +0,0 @@ -GEX F072 hub prototype board -============================ - -This board was the first custom PCB for GEX. - -To flash a firmware, remove JP1, reset and flash using DFU. Replace JP1 and reset for normal operation. - -Press and hold S1 to enable USB VFS with config files. Same process for locking and persisting to Flash. -Settings (but not system settings) can also be changed via the USB API. - -![photo](photo.jpg) - -Errata ------- - -*which is an euphemnism for bugs* - -- JP1 - bad footprint, too fine pitch. Can be fixed by soldering the header on the bottom, with slightly bent pins -- P1 - the SWD connector, same problem, no fix needed or available. Use DFU for flashing -- Missign NRESET button. Normally not needed, but often missed. You can solder it on the bottom side from one end of R2 to the GND testpoint. - -![photo](bugfixes.jpg) diff --git a/panel Zero+Hub+Dongle/GEX_PNL_1b.zip b/panel Zero+Hub+Dongle/GEX_PNL_1b.zip new file mode 100755 index 0000000..cf1beb9 Binary files /dev/null and b/panel Zero+Hub+Dongle/GEX_PNL_1b.zip differ diff --git a/panel Zero+Hub+Dongle/README.md b/panel Zero+Hub+Dongle/README.md new file mode 100644 index 0000000..21cba1c --- /dev/null +++ b/panel Zero+Hub+Dongle/README.md @@ -0,0 +1,8 @@ +This is a panelized PCB including + +- 2x GEX Hub +- 3x GEX Zero +- 3x GEX Radio Dongle + +![img](panel.png) + diff --git a/panel Zero+Hub+Dongle/panel.png b/panel Zero+Hub+Dongle/panel.png new file mode 100755 index 0000000..a2860bc Binary files /dev/null and b/panel Zero+Hub+Dongle/panel.png differ