new schems and updated comments

před 6 roky · 824ebbab51
--- a/HUB/rev.1/GEX_Dongle.pdf
+++ b/HUB/rev.1/GEX_Dongle.pdf
--- a/HUB/rev.1/GexHubSchemRev1.pdf
+++ b/HUB/rev.1/GexHubSchemRev1.pdf
--- a/HUB/rev.2/GexHubSchemRev2.pdf
+++ b/HUB/rev.2/GexHubSchemRev2.pdf
--- a/Dongle/rev.1/GexRadioSchemRev1.pdf
+++ b/Dongle/rev.1/GexRadioSchemRev1.pdf
--- a/Dongle/rev.1/gex-radio-rev1-schematic.pdf
+++ b/Dongle/rev.1/gex-radio-rev1-schematic.pdf
--- a/Zero/README.md
+++ b/Zero/README.md
@ -54,3 +54,8 @@ PB12 and PB14 can only be used as regular GPIO when the radio link is enabled, n
 left unconnected, as there is no available remap for the clock line.

 The radio module is used for remote control with the GEX Dongle and provides a fast, half duplex connection.
+
+## BUGS
+
+- One of the I2C pull-ups is at the wrong pin in the header (off by one, easy fix by cutting a trace and shorting with solder)
+- Pins PB15 and PB14 should be swapped in the connector for SPI pHATs compatibility (when the bototm SPI port is used)
--- a/Zero/rev.1/GexZeroSchemRev1.pdf
+++ b/Zero/rev.1/GexZeroSchemRev1.pdf
--- a/Zero/rev.1/gex-zero-rev1-schematic.pdf
+++ b/Zero/rev.1/gex-zero-rev1-schematic.pdf
--- a/Zero/rev.2/GEX_Zero.PrjPcb
+++ b/Zero/rev.2/GEX_Zero.PrjPcb
--- a/Zero/rev.2/GEX_Zero.PrjPcbStructure
+++ b/Zero/rev.2/GEX_Zero.PrjPcbStructure
@ -0,0 +1 @@
+Record=TopLevelDocument|FileName=GEX_Zero.SchDoc
--- a/Zero/rev.2/GEX_Zero.SchDoc
+++ b/Zero/rev.2/GEX_Zero.SchDoc
--- a/Zero/rev.2/GexZeroSchemRev2.pdf
+++ b/Zero/rev.2/GexZeroSchemRev2.pdf
				`@ -0,0 +1 @@`
				`Record=TopLevelDocument\|FileName=GEX_Zero.SchDoc`