new schems and updated comments

master
Ondřej Hruška 6 years ago
parent 93d653b277
commit 824ebbab51
Signed by: MightyPork
GPG Key ID: 2C5FD5035250423D
  1. BIN
      GEX HUB/rev.1/GEX_Dongle.pdf
  2. BIN
      GEX HUB/rev.1/GexHubSchemRev1.pdf
  3. BIN
      GEX HUB/rev.2/GexHubSchemRev2.pdf
  4. BIN
      GEX Radio Dongle/rev.1/GexRadioSchemRev1.pdf
  5. BIN
      GEX Radio Dongle/rev.1/gex-radio-rev1-schematic.pdf
  6. 5
      GEX Zero/README.md
  7. BIN
      GEX Zero/rev.1/GexZeroSchemRev1.pdf
  8. BIN
      GEX Zero/rev.1/gex-zero-rev1-schematic.pdf
  9. 1385
      GEX Zero/rev.2/GEX_Zero.PrjPcb
  10. 1
      GEX Zero/rev.2/GEX_Zero.PrjPcbStructure
  11. BIN
      GEX Zero/rev.2/GEX_Zero.SchDoc
  12. BIN
      GEX Zero/rev.2/GexZeroSchemRev2.pdf

Binary file not shown.

Binary file not shown.

Binary file not shown.

@ -54,3 +54,8 @@ PB12 and PB14 can only be used as regular GPIO when the radio link is enabled, n
left unconnected, as there is no available remap for the clock line.
The radio module is used for remote control with the GEX Dongle and provides a fast, half duplex connection.
## BUGS
- One of the I2C pull-ups is at the wrong pin in the header (off by one, easy fix by cutting a trace and shorting with solder)
- Pins PB15 and PB14 should be swapped in the connector for SPI pHATs compatibility (when the bototm SPI port is used)

File diff suppressed because it is too large Load Diff

@ -0,0 +1 @@
Record=TopLevelDocument|FileName=GEX_Zero.SchDoc

Binary file not shown.
Loading…
Cancel
Save