GEX port to STM32F072. This is currently the main port.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
gex-f072/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_rtc.c

740 lines
26 KiB

/**
******************************************************************************
* @file stm32f0xx_ll_rtc.c
* @author MCD Application Team
* @brief RTC LL module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
#if defined(USE_FULL_LL_DRIVER)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_ll_rtc.h"
#include "stm32f0xx_ll_cortex.h"
#ifdef USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined(RTC)
/** @addtogroup RTC_LL
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @addtogroup RTC_LL_Private_Constants
* @{
*/
/* Default values used for prescaler */
#define RTC_ASYNCH_PRESC_DEFAULT 0x0000007FU
#define RTC_SYNCH_PRESC_DEFAULT 0x000000FFU
/* Values used for timeout */
#define RTC_INITMODE_TIMEOUT 1000U /* 1s when tick set to 1ms */
#define RTC_SYNCHRO_TIMEOUT 1000U /* 1s when tick set to 1ms */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup RTC_LL_Private_Macros
* @{
*/
#define IS_LL_RTC_HOURFORMAT(__VALUE__) (((__VALUE__) == LL_RTC_HOURFORMAT_24HOUR) \
|| ((__VALUE__) == LL_RTC_HOURFORMAT_AMPM))
#define IS_LL_RTC_ASYNCH_PREDIV(__VALUE__) ((__VALUE__) <= 0x7FU)
#define IS_LL_RTC_SYNCH_PREDIV(__VALUE__) ((__VALUE__) <= 0x7FFFU)
#define IS_LL_RTC_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_FORMAT_BIN) \
|| ((__VALUE__) == LL_RTC_FORMAT_BCD))
#define IS_LL_RTC_TIME_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_TIME_FORMAT_AM_OR_24) \
|| ((__VALUE__) == LL_RTC_TIME_FORMAT_PM))
#define IS_LL_RTC_HOUR12(__HOUR__) (((__HOUR__) > 0U) && ((__HOUR__) <= 12U))
#define IS_LL_RTC_HOUR24(__HOUR__) ((__HOUR__) <= 23U)
#define IS_LL_RTC_MINUTES(__MINUTES__) ((__MINUTES__) <= 59U)
#define IS_LL_RTC_SECONDS(__SECONDS__) ((__SECONDS__) <= 59U)
#define IS_LL_RTC_WEEKDAY(__VALUE__) (((__VALUE__) == LL_RTC_WEEKDAY_MONDAY) \
|| ((__VALUE__) == LL_RTC_WEEKDAY_TUESDAY) \
|| ((__VALUE__) == LL_RTC_WEEKDAY_WEDNESDAY) \
|| ((__VALUE__) == LL_RTC_WEEKDAY_THURSDAY) \
|| ((__VALUE__) == LL_RTC_WEEKDAY_FRIDAY) \
|| ((__VALUE__) == LL_RTC_WEEKDAY_SATURDAY) \
|| ((__VALUE__) == LL_RTC_WEEKDAY_SUNDAY))
#define IS_LL_RTC_DAY(__DAY__) (((__DAY__) >= 1U) && ((__DAY__) <= 31U))
#define IS_LL_RTC_MONTH(__VALUE__) (((__VALUE__) == LL_RTC_MONTH_JANUARY) \
|| ((__VALUE__) == LL_RTC_MONTH_FEBRUARY) \
|| ((__VALUE__) == LL_RTC_MONTH_MARCH) \
|| ((__VALUE__) == LL_RTC_MONTH_APRIL) \
|| ((__VALUE__) == LL_RTC_MONTH_MAY) \
|| ((__VALUE__) == LL_RTC_MONTH_JUNE) \
|| ((__VALUE__) == LL_RTC_MONTH_JULY) \
|| ((__VALUE__) == LL_RTC_MONTH_AUGUST) \
|| ((__VALUE__) == LL_RTC_MONTH_SEPTEMBER) \
|| ((__VALUE__) == LL_RTC_MONTH_OCTOBER) \
|| ((__VALUE__) == LL_RTC_MONTH_NOVEMBER) \
|| ((__VALUE__) == LL_RTC_MONTH_DECEMBER))
#define IS_LL_RTC_YEAR(__YEAR__) ((__YEAR__) <= 99U)
#define IS_LL_RTC_ALMA_MASK(__VALUE__) (((__VALUE__) == LL_RTC_ALMA_MASK_NONE) \
|| ((__VALUE__) == LL_RTC_ALMA_MASK_DATEWEEKDAY) \
|| ((__VALUE__) == LL_RTC_ALMA_MASK_HOURS) \
|| ((__VALUE__) == LL_RTC_ALMA_MASK_MINUTES) \
|| ((__VALUE__) == LL_RTC_ALMA_MASK_SECONDS) \
|| ((__VALUE__) == LL_RTC_ALMA_MASK_ALL))
#define IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(__SEL__) (((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) || \
((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY))
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup RTC_LL_Exported_Functions
* @{
*/
/** @addtogroup RTC_LL_EF_Init
* @{
*/
/**
* @brief De-Initializes the RTC registers to their default reset values.
* @note This function doesn't reset the RTC Clock source and RTC Backup Data
* registers.
* @param RTCx RTC Instance
* @retval An ErrorStatus enumeration value:
* - SUCCESS: RTC registers are de-initialized
* - ERROR: RTC registers are not de-initialized
*/
ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx)
{
ErrorStatus status = ERROR;
/* Check the parameter */
assert_param(IS_RTC_ALL_INSTANCE(RTCx));
/* Disable the write protection for RTC registers */
LL_RTC_DisableWriteProtection(RTCx);
/* Set Initialization mode */
if (LL_RTC_EnterInitMode(RTCx) != ERROR)
{
/* Reset TR, DR and CR registers */
LL_RTC_WriteReg(RTCx, TR, 0x00000000U);
#if defined(RTC_WAKEUP_SUPPORT)
LL_RTC_WriteReg(RTCx, WUTR, RTC_WUTR_WUT);
#endif /* RTC_WAKEUP_SUPPORT */
LL_RTC_WriteReg(RTCx, DR , (RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0));
/* Reset All CR bits except CR[2:0] */
#if defined(RTC_WAKEUP_SUPPORT)
LL_RTC_WriteReg(RTCx, CR, (LL_RTC_ReadReg(RTCx, CR) & RTC_CR_WUCKSEL));
#else
LL_RTC_WriteReg(RTCx, CR, 0x00000000U);
#endif /* RTC_WAKEUP_SUPPORT */
LL_RTC_WriteReg(RTCx, PRER, (RTC_PRER_PREDIV_A | RTC_SYNCH_PRESC_DEFAULT));
LL_RTC_WriteReg(RTCx, ALRMAR, 0x00000000U);
LL_RTC_WriteReg(RTCx, SHIFTR, 0x00000000U);
LL_RTC_WriteReg(RTCx, CALR, 0x00000000U);
LL_RTC_WriteReg(RTCx, ALRMASSR, 0x00000000U);
/* Reset ISR register and exit initialization mode */
LL_RTC_WriteReg(RTCx, ISR, 0x00000000U);
/* Reset Tamper and alternate functions configuration register */
LL_RTC_WriteReg(RTCx, TAFCR, 0x00000000U);
/* Wait till the RTC RSF flag is set */
status = LL_RTC_WaitForSynchro(RTCx);
}
/* Enable the write protection for RTC registers */
LL_RTC_EnableWriteProtection(RTCx);
return status;
}
/**
* @brief Initializes the RTC registers according to the specified parameters
* in RTC_InitStruct.
* @param RTCx RTC Instance
* @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure that contains
* the configuration information for the RTC peripheral.
* @note The RTC Prescaler register is write protected and can be written in
* initialization mode only.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: RTC registers are initialized
* - ERROR: RTC registers are not initialized
*/
ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct)
{
ErrorStatus status = ERROR;
/* Check the parameters */
assert_param(IS_RTC_ALL_INSTANCE(RTCx));
assert_param(IS_LL_RTC_HOURFORMAT(RTC_InitStruct->HourFormat));
assert_param(IS_LL_RTC_ASYNCH_PREDIV(RTC_InitStruct->AsynchPrescaler));
assert_param(IS_LL_RTC_SYNCH_PREDIV(RTC_InitStruct->SynchPrescaler));
/* Disable the write protection for RTC registers */
LL_RTC_DisableWriteProtection(RTCx);
/* Set Initialization mode */
if (LL_RTC_EnterInitMode(RTCx) != ERROR)
{
/* Set Hour Format */
LL_RTC_SetHourFormat(RTCx, RTC_InitStruct->HourFormat);
/* Configure Synchronous and Asynchronous prescaler factor */
LL_RTC_SetSynchPrescaler(RTCx, RTC_InitStruct->SynchPrescaler);
LL_RTC_SetAsynchPrescaler(RTCx, RTC_InitStruct->AsynchPrescaler);
/* Exit Initialization mode */
LL_RTC_DisableInitMode(RTCx);
status = SUCCESS;
}
/* Enable the write protection for RTC registers */
LL_RTC_EnableWriteProtection(RTCx);
return status;
}
/**
* @brief Set each @ref LL_RTC_InitTypeDef field to default value.
* @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure which will be initialized.
* @retval None
*/
void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct)
{
/* Set RTC_InitStruct fields to default values */
RTC_InitStruct->HourFormat = LL_RTC_HOURFORMAT_24HOUR;
RTC_InitStruct->AsynchPrescaler = RTC_ASYNCH_PRESC_DEFAULT;
RTC_InitStruct->SynchPrescaler = RTC_SYNCH_PRESC_DEFAULT;
}
/**
* @brief Set the RTC current time.
* @param RTCx RTC Instance
* @param RTC_Format This parameter can be one of the following values:
* @arg @ref LL_RTC_FORMAT_BIN
* @arg @ref LL_RTC_FORMAT_BCD
* @param RTC_TimeStruct pointer to a RTC_TimeTypeDef structure that contains
* the time configuration information for the RTC.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: RTC Time register is configured
* - ERROR: RTC Time register is not configured
*/
ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct)
{
ErrorStatus status = ERROR;
/* Check the parameters */
assert_param(IS_RTC_ALL_INSTANCE(RTCx));
assert_param(IS_LL_RTC_FORMAT(RTC_Format));
if (RTC_Format == LL_RTC_FORMAT_BIN)
{
if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR)
{
assert_param(IS_LL_RTC_HOUR12(RTC_TimeStruct->Hours));
assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat));
}
else
{
RTC_TimeStruct->TimeFormat = 0x00U;
assert_param(IS_LL_RTC_HOUR24(RTC_TimeStruct->Hours));
}
assert_param(IS_LL_RTC_MINUTES(RTC_TimeStruct->Minutes));
assert_param(IS_LL_RTC_SECONDS(RTC_TimeStruct->Seconds));
}
else
{
if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR)
{
assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours)));
assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat));
}
else
{
RTC_TimeStruct->TimeFormat = 0x00U;
assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours)));
}
assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Minutes)));
assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Seconds)));
}
/* Disable the write protection for RTC registers */
LL_RTC_DisableWriteProtection(RTCx);
/* Set Initialization mode */
if (LL_RTC_EnterInitMode(RTCx) != ERROR)
{
/* Check the input parameters format */
if (RTC_Format != LL_RTC_FORMAT_BIN)
{
LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, RTC_TimeStruct->Hours,
RTC_TimeStruct->Minutes, RTC_TimeStruct->Seconds);
}
else
{
LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Hours),
__LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Minutes),
__LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Seconds));
}
/* Exit Initialization mode */
LL_RTC_DisableInitMode(RTC);
/* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U)
{
status = LL_RTC_WaitForSynchro(RTCx);
}
else
{
status = SUCCESS;
}
}
/* Enable the write protection for RTC registers */
LL_RTC_EnableWriteProtection(RTCx);
return status;
}
/**
* @brief Set each @ref LL_RTC_TimeTypeDef field to default value (Time = 00h:00min:00sec).
* @param RTC_TimeStruct pointer to a @ref LL_RTC_TimeTypeDef structure which will be initialized.
* @retval None
*/
void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct)
{
/* Time = 00h:00min:00sec */
RTC_TimeStruct->TimeFormat = LL_RTC_TIME_FORMAT_AM_OR_24;
RTC_TimeStruct->Hours = 0U;
RTC_TimeStruct->Minutes = 0U;
RTC_TimeStruct->Seconds = 0U;
}
/**
* @brief Set the RTC current date.
* @param RTCx RTC Instance
* @param RTC_Format This parameter can be one of the following values:
* @arg @ref LL_RTC_FORMAT_BIN
* @arg @ref LL_RTC_FORMAT_BCD
* @param RTC_DateStruct pointer to a RTC_DateTypeDef structure that contains
* the date configuration information for the RTC.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: RTC Day register is configured
* - ERROR: RTC Day register is not configured
*/
ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct)
{
ErrorStatus status = ERROR;
/* Check the parameters */
assert_param(IS_RTC_ALL_INSTANCE(RTCx));
assert_param(IS_LL_RTC_FORMAT(RTC_Format));
if ((RTC_Format == LL_RTC_FORMAT_BIN) && ((RTC_DateStruct->Month & 0x10U) == 0x10U))
{
RTC_DateStruct->Month = (RTC_DateStruct->Month & (uint32_t)~(0x10U)) + 0x0AU;
}
if (RTC_Format == LL_RTC_FORMAT_BIN)
{
assert_param(IS_LL_RTC_YEAR(RTC_DateStruct->Year));
assert_param(IS_LL_RTC_MONTH(RTC_DateStruct->Month));
assert_param(IS_LL_RTC_DAY(RTC_DateStruct->Day));
}
else
{
assert_param(IS_LL_RTC_YEAR(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Year)));
assert_param(IS_LL_RTC_MONTH(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Month)));
assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Day)));
}
assert_param(IS_LL_RTC_WEEKDAY(RTC_DateStruct->WeekDay));
/* Disable the write protection for RTC registers */
LL_RTC_DisableWriteProtection(RTCx);
/* Set Initialization mode */
if (LL_RTC_EnterInitMode(RTCx) != ERROR)
{
/* Check the input parameters format */
if (RTC_Format != LL_RTC_FORMAT_BIN)
{
LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, RTC_DateStruct->Day, RTC_DateStruct->Month, RTC_DateStruct->Year);
}
else
{
LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Day),
__LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Month), __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Year));
}
/* Exit Initialization mode */
LL_RTC_DisableInitMode(RTC);
/* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U)
{
status = LL_RTC_WaitForSynchro(RTCx);
}
else
{
status = SUCCESS;
}
}
/* Enable the write protection for RTC registers */
LL_RTC_EnableWriteProtection(RTCx);
return status;
}
/**
* @brief Set each @ref LL_RTC_DateTypeDef field to default value (date = Monday, January 01 xx00)
* @param RTC_DateStruct pointer to a @ref LL_RTC_DateTypeDef structure which will be initialized.
* @retval None
*/
void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct)
{
/* Monday, January 01 xx00 */
RTC_DateStruct->WeekDay = LL_RTC_WEEKDAY_MONDAY;
RTC_DateStruct->Day = 1U;
RTC_DateStruct->Month = LL_RTC_MONTH_JANUARY;
RTC_DateStruct->Year = 0U;
}
/**
* @brief Set the RTC Alarm A.
* @note The Alarm register can only be written when the corresponding Alarm
* is disabled (Use @ref LL_RTC_ALMA_Disable function).
* @param RTCx RTC Instance
* @param RTC_Format This parameter can be one of the following values:
* @arg @ref LL_RTC_FORMAT_BIN
* @arg @ref LL_RTC_FORMAT_BCD
* @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure that
* contains the alarm configuration parameters.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: ALARMA registers are configured
* - ERROR: ALARMA registers are not configured
*/
ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct)
{
/* Check the parameters */
assert_param(IS_RTC_ALL_INSTANCE(RTCx));
assert_param(IS_LL_RTC_FORMAT(RTC_Format));
assert_param(IS_LL_RTC_ALMA_MASK(RTC_AlarmStruct->AlarmMask));
assert_param(IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(RTC_AlarmStruct->AlarmDateWeekDaySel));
if (RTC_Format == LL_RTC_FORMAT_BIN)
{
if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR)
{
assert_param(IS_LL_RTC_HOUR12(RTC_AlarmStruct->AlarmTime.Hours));
assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat));
}
else
{
RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U;
assert_param(IS_LL_RTC_HOUR24(RTC_AlarmStruct->AlarmTime.Hours));
}
assert_param(IS_LL_RTC_MINUTES(RTC_AlarmStruct->AlarmTime.Minutes));
assert_param(IS_LL_RTC_SECONDS(RTC_AlarmStruct->AlarmTime.Seconds));
if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE)
{
assert_param(IS_LL_RTC_DAY(RTC_AlarmStruct->AlarmDateWeekDay));
}
else
{
assert_param(IS_LL_RTC_WEEKDAY(RTC_AlarmStruct->AlarmDateWeekDay));
}
}
else
{
if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR)
{
assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours)));
assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat));
}
else
{
RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U;
assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours)));
}
assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes)));
assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds)));
if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE)
{
assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay)));
}
else
{
assert_param(IS_LL_RTC_WEEKDAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay)));
}
}
/* Disable the write protection for RTC registers */
LL_RTC_DisableWriteProtection(RTCx);
/* Select weekday selection */
if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE)
{
/* Set the date for ALARM */
LL_RTC_ALMA_DisableWeekday(RTCx);
if (RTC_Format != LL_RTC_FORMAT_BIN)
{
LL_RTC_ALMA_SetDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay);
}
else
{
LL_RTC_ALMA_SetDay(RTCx, __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmDateWeekDay));
}
}
else
{
/* Set the week day for ALARM */
LL_RTC_ALMA_EnableWeekday(RTCx);
LL_RTC_ALMA_SetWeekDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay);
}
/* Configure the Alarm register */
if (RTC_Format != LL_RTC_FORMAT_BIN)
{
LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, RTC_AlarmStruct->AlarmTime.Hours,
RTC_AlarmStruct->AlarmTime.Minutes, RTC_AlarmStruct->AlarmTime.Seconds);
}
else
{
LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat,
__LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Hours),
__LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Minutes),
__LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Seconds));
}
/* Set ALARM mask */
LL_RTC_ALMA_SetMask(RTCx, RTC_AlarmStruct->AlarmMask);
/* Enable the write protection for RTC registers */
LL_RTC_EnableWriteProtection(RTCx);
return SUCCESS;
}
/**
* @brief Set each @ref LL_RTC_AlarmTypeDef of ALARMA field to default value (Time = 00h:00mn:00sec /
* Day = 1st day of the month/Mask = all fields are masked).
* @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure which will be initialized.
* @retval None
*/
void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct)
{
/* Alarm Time Settings : Time = 00h:00mn:00sec */
RTC_AlarmStruct->AlarmTime.TimeFormat = LL_RTC_ALMA_TIME_FORMAT_AM;
RTC_AlarmStruct->AlarmTime.Hours = 0U;
RTC_AlarmStruct->AlarmTime.Minutes = 0U;
RTC_AlarmStruct->AlarmTime.Seconds = 0U;
/* Alarm Day Settings : Day = 1st day of the month */
RTC_AlarmStruct->AlarmDateWeekDaySel = LL_RTC_ALMA_DATEWEEKDAYSEL_DATE;
RTC_AlarmStruct->AlarmDateWeekDay = 1U;
/* Alarm Masks Settings : Mask = all fields are not masked */
RTC_AlarmStruct->AlarmMask = LL_RTC_ALMA_MASK_NONE;
}
/**
* @brief Enters the RTC Initialization mode.
* @note The RTC Initialization mode is write protected, use the
* @ref LL_RTC_DisableWriteProtection before calling this function.
* @param RTCx RTC Instance
* @retval An ErrorStatus enumeration value:
* - SUCCESS: RTC is in Init mode
* - ERROR: RTC is not in Init mode
*/
ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx)
{
__IO uint32_t timeout = RTC_INITMODE_TIMEOUT;
ErrorStatus status = SUCCESS;
uint32_t tmp = 0U;
/* Check the parameter */
assert_param(IS_RTC_ALL_INSTANCE(RTCx));
/* Check if the Initialization mode is set */
if (LL_RTC_IsActiveFlag_INIT(RTCx) == 0U)
{
/* Set the Initialization mode */
LL_RTC_EnableInitMode(RTCx);
/* Wait till RTC is in INIT state and if Time out is reached exit */
tmp = LL_RTC_IsActiveFlag_INIT(RTCx);
while ((timeout != 0U) && (tmp != 1U))
{
if (LL_SYSTICK_IsActiveCounterFlag() == 1U)
{
timeout --;
}
tmp = LL_RTC_IsActiveFlag_INIT(RTCx);
if (timeout == 0U)
{
status = ERROR;
}
}
}
return status;
}
/**
* @brief Exit the RTC Initialization mode.
* @note When the initialization sequence is complete, the calendar restarts
* counting after 4 RTCCLK cycles.
* @note The RTC Initialization mode is write protected, use the
* @ref LL_RTC_DisableWriteProtection before calling this function.
* @param RTCx RTC Instance
* @retval An ErrorStatus enumeration value:
* - SUCCESS: RTC exited from in Init mode
* - ERROR: Not applicable
*/
ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx)
{
/* Check the parameter */
assert_param(IS_RTC_ALL_INSTANCE(RTCx));
/* Disable initialization mode */
LL_RTC_DisableInitMode(RTCx);
return SUCCESS;
}
/**
* @brief Waits until the RTC Time and Day registers (RTC_TR and RTC_DR) are
* synchronized with RTC APB clock.
* @note The RTC Resynchronization mode is write protected, use the
* @ref LL_RTC_DisableWriteProtection before calling this function.
* @note To read the calendar through the shadow registers after Calendar
* initialization, calendar update or after wakeup from low power modes
* the software must first clear the RSF flag.
* The software must then wait until it is set again before reading
* the calendar, which means that the calendar registers have been
* correctly copied into the RTC_TR and RTC_DR shadow registers.
* @param RTCx RTC Instance
* @retval An ErrorStatus enumeration value:
* - SUCCESS: RTC registers are synchronised
* - ERROR: RTC registers are not synchronised
*/
ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx)
{
__IO uint32_t timeout = RTC_SYNCHRO_TIMEOUT;
ErrorStatus status = SUCCESS;
uint32_t tmp = 0U;
/* Check the parameter */
assert_param(IS_RTC_ALL_INSTANCE(RTCx));
/* Clear RSF flag */
LL_RTC_ClearFlag_RS(RTCx);
/* Wait the registers to be synchronised */
tmp = LL_RTC_IsActiveFlag_RS(RTCx);
while ((timeout != 0U) && (tmp != 0U))
{
if (LL_SYSTICK_IsActiveCounterFlag() == 1U)
{
timeout--;
}
tmp = LL_RTC_IsActiveFlag_RS(RTCx);
if (timeout == 0U)
{
status = ERROR;
}
}
if (status != ERROR)
{
timeout = RTC_SYNCHRO_TIMEOUT;
tmp = LL_RTC_IsActiveFlag_RS(RTCx);
while ((timeout != 0U) && (tmp != 1U))
{
if (LL_SYSTICK_IsActiveCounterFlag() == 1U)
{
timeout--;
}
tmp = LL_RTC_IsActiveFlag_RS(RTCx);
if (timeout == 0U)
{
status = ERROR;
}
}
}
return (status);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined(RTC) */
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/