some debugging progress for new plat

doublebuf
Ondřej Hruška 7 years ago
parent 83177b86d2
commit a24e19a2af
Signed by: MightyPork
GPG Key ID: 2C5FD5035250423D
  1. 6
      CMakeLists.txt
  2. 2
      Inc/main.h
  3. 24
      Inc/stm32f0xx_hal_conf.h
  4. 90
      Inc/usb.h
  5. 6
      Makefile
  6. 6
      Src/main.c
  7. 123
      Src/usb.c

@ -38,9 +38,9 @@ include_directories(
# CMSIS + HAL # CMSIS + HAL
Drivers/CMSIS/Include Drivers/CMSIS/Include
Drivers/CMSIS/Device/ST/STM32F1xx/Include Drivers/CMSIS/Device/ST/STM32F0xx/Include
Drivers/STM32F1xx_HAL_Driver/Inc Drivers/STM32F0xx_HAL_Driver/Inc
Drivers/STM32F1xx_HAL_Driver/Inc/Legacy Drivers/STM32F0xx_HAL_Driver/Inc/Legacy
# USB Library # USB Library
User/USB/STM32_USB_Device_Library/Core/Inc User/USB/STM32_USB_Device_Library/Core/Inc

@ -52,7 +52,7 @@
/* Includes ------------------------------------------------------------------*/ /* Includes ------------------------------------------------------------------*/
/* USER CODE BEGIN Includes */ /* USER CODE BEGIN Includes */
#include "stm32_assert.h"
/* USER CODE END Includes */ /* USER CODE END Includes */
/* Private define ------------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/

@ -43,6 +43,7 @@
#include "main.h" #include "main.h"
/* Exported types ------------------------------------------------------------*/ /* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/
#define USBD_NUM_ENDPOINTS 3
/* ########################## Module Selection ############################## */ /* ########################## Module Selection ############################## */
/** /**
@ -168,12 +169,6 @@
#define PREFETCH_ENABLE 1 #define PREFETCH_ENABLE 1
#define INSTRUCTION_CACHE_ENABLE 0 #define INSTRUCTION_CACHE_ENABLE 0
#define DATA_CACHE_ENABLE 0 #define DATA_CACHE_ENABLE 0
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
#define USE_FULL_ASSERT 1U
/* ################## SPI peripheral configuration ########################## */ /* ################## SPI peripheral configuration ########################## */
@ -293,23 +288,6 @@
#include "stm32f0xx_hal_wwdg.h" #include "stm32f0xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */ #endif /* HAL_WWDG_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus #ifdef __cplusplus
} }
#endif #endif

@ -1,90 +0,0 @@
/**
******************************************************************************
* File Name : USB.h
* Description : This file provides code for the configuration
* of the USB instances.
******************************************************************************
* This notice applies to any and all portions of this file
* that are not between comment pairs USER CODE BEGIN and
* USER CODE END. Other portions of this file, whether
* inserted by the user or by software development tools
* are owned by their respective copyright owners.
*
* Copyright (c) 2017 STMicroelectronics International N.V.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted, provided that the following conditions are met:
*
* 1. Redistribution of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of other
* contributors to this software may be used to endorse or promote products
* derived from this software without specific written permission.
* 4. This software, including modifications and/or derivative works of this
* software, must execute solely and exclusively on microcontroller or
* microprocessor devices manufactured by or for STMicroelectronics.
* 5. Redistribution and use of this software other than as permitted under
* this license is void and will automatically terminate your rights under
* this license.
*
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __usb_H
#define __usb_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal.h"
#include "main.h"
#include "stm32_assert.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
extern PCD_HandleTypeDef hpcd_USB_FS;
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
void MX_USB_PCD_Init(void);
/* USER CODE BEGIN Prototypes */
/* USER CODE END Prototypes */
#ifdef __cplusplus
}
#endif
#endif /*__ usb_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

@ -11,7 +11,7 @@
# ------------------------------------------------ # ------------------------------------------------
include User/gex.mk include User/gex.mk
GEX_PLAT=F072B_DISCOVERY GEX_PLAT=F072_DISCOVERY
###################################### ######################################
# target # target
@ -82,18 +82,14 @@ Middlewares/Third_Party/FreeRTOS/Source/croutine.c \
Middlewares/Third_Party/FreeRTOS/Source/event_groups.c \ Middlewares/Third_Party/FreeRTOS/Source/event_groups.c \
Middlewares/Third_Party/FreeRTOS/Source/list.c \ Middlewares/Third_Party/FreeRTOS/Source/list.c \
Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/port.c \ Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/port.c \
Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c \
Middlewares/Third_Party/FreeRTOS/Source/queue.c \ Middlewares/Third_Party/FreeRTOS/Source/queue.c \
Middlewares/Third_Party/FreeRTOS/Source/tasks.c \ Middlewares/Third_Party/FreeRTOS/Source/tasks.c \
Middlewares/Third_Party/FreeRTOS/Source/timers.c \ Middlewares/Third_Party/FreeRTOS/Source/timers.c \
Src/freertos.c \
Src/gpio.c \
Src/main.c \ Src/main.c \
Src/stm32f0xx_hal_msp.c \ Src/stm32f0xx_hal_msp.c \
Src/stm32f0xx_hal_timebase_TIM.c \ Src/stm32f0xx_hal_timebase_TIM.c \
Src/stm32f0xx_it.c \ Src/stm32f0xx_it.c \
Src/system_stm32f0xx.c \ Src/system_stm32f0xx.c \
Src/usb.c \
Src/main.c Src/main.c
C_SOURCES += $(foreach sdir,$(GEX_SRC_DIR),$(wildcard $(sdir)/*.c)) C_SOURCES += $(foreach sdir,$(GEX_SRC_DIR),$(wildcard $(sdir)/*.c))

@ -50,11 +50,9 @@
#include "main.h" #include "main.h"
#include "stm32f0xx_hal.h" #include "stm32f0xx_hal.h"
#include "cmsis_os.h" #include "cmsis_os.h"
#include "usb.h"
#include "gpio.h"
/* USER CODE BEGIN Includes */ /* USER CODE BEGIN Includes */
#include "gex_hooks.h"
/* USER CODE END Includes */ /* USER CODE END Includes */
/* Private variables ---------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/
@ -101,7 +99,7 @@ int main(void)
/* USER CODE END SysInit */ /* USER CODE END SysInit */
/* Initialize all configured peripherals */ /* Initialize all configured peripherals */
MX_GPIO_Init(); GEX_PreInit();
/* USER CODE BEGIN 2 */ /* USER CODE BEGIN 2 */

@ -1,123 +0,0 @@
/**
******************************************************************************
* File Name : USB.c
* Description : This file provides code for the configuration
* of the USB instances.
******************************************************************************
* This notice applies to any and all portions of this file
* that are not between comment pairs USER CODE BEGIN and
* USER CODE END. Other portions of this file, whether
* inserted by the user or by software development tools
* are owned by their respective copyright owners.
*
* Copyright (c) 2017 STMicroelectronics International N.V.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted, provided that the following conditions are met:
*
* 1. Redistribution of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of other
* contributors to this software may be used to endorse or promote products
* derived from this software without specific written permission.
* 4. This software, including modifications and/or derivative works of this
* software, must execute solely and exclusively on microcontroller or
* microprocessor devices manufactured by or for STMicroelectronics.
* 5. Redistribution and use of this software other than as permitted under
* this license is void and will automatically terminate your rights under
* this license.
*
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb.h"
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
PCD_HandleTypeDef hpcd_USB_FS;
/* USB init function */
void MX_USB_PCD_Init(void)
{
hpcd_USB_FS.Instance = USB;
hpcd_USB_FS.Init.dev_endpoints = 8;
hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_64;
hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
hpcd_USB_FS.Init.low_power_enable = DISABLE;
hpcd_USB_FS.Init.lpm_enable = DISABLE;
hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
{
_Error_Handler(__FILE__, __LINE__);
}
}
void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
{
if(pcdHandle->Instance==USB)
{
/* USER CODE BEGIN USB_MspInit 0 */
/* USER CODE END USB_MspInit 0 */
/* USB clock enable */
__HAL_RCC_USB_CLK_ENABLE();
/* USER CODE BEGIN USB_MspInit 1 */
/* USER CODE END USB_MspInit 1 */
}
}
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
{
if(pcdHandle->Instance==USB)
{
/* USER CODE BEGIN USB_MspDeInit 0 */
/* USER CODE END USB_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USB_CLK_DISABLE();
/* USER CODE BEGIN USB_MspDeInit 1 */
/* USER CODE END USB_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Loading…
Cancel
Save