GEX port to STM32F072. This is currently the main port.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
gex-f072/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_i2c.c

246 lines
8.7 KiB

7 years ago
/**
******************************************************************************
* @file stm32f0xx_ll_i2c.c
* @author MCD Application Team
* @brief I2C LL module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
#if defined(USE_FULL_LL_DRIVER)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_ll_i2c.h"
#include "stm32f0xx_ll_bus.h"
#ifdef USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined (I2C1) || defined (I2C2)
/** @defgroup I2C_LL I2C
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup I2C_LL_Private_Macros
* @{
*/
#define IS_LL_I2C_PERIPHERAL_MODE(__VALUE__) (((__VALUE__) == LL_I2C_MODE_I2C) || \
((__VALUE__) == LL_I2C_MODE_SMBUS_HOST) || \
((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE) || \
((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE_ARP))
#define IS_LL_I2C_ANALOG_FILTER(__VALUE__) (((__VALUE__) == LL_I2C_ANALOGFILTER_ENABLE) || \
((__VALUE__) == LL_I2C_ANALOGFILTER_DISABLE))
#define IS_LL_I2C_DIGITAL_FILTER(__VALUE__) ((__VALUE__) <= 0x0000000FU)
#define IS_LL_I2C_OWN_ADDRESS1(__VALUE__) ((__VALUE__) <= 0x000003FFU)
#define IS_LL_I2C_TYPE_ACKNOWLEDGE(__VALUE__) (((__VALUE__) == LL_I2C_ACK) || \
((__VALUE__) == LL_I2C_NACK))
#define IS_LL_I2C_OWN_ADDRSIZE(__VALUE__) (((__VALUE__) == LL_I2C_OWNADDRESS1_7BIT) || \
((__VALUE__) == LL_I2C_OWNADDRESS1_10BIT))
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup I2C_LL_Exported_Functions
* @{
*/
/** @addtogroup I2C_LL_EF_Init
* @{
*/
/**
* @brief De-initialize the I2C registers to their default reset values.
* @param I2Cx I2C Instance.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: I2C registers are de-initialized
* - ERROR: I2C registers are not de-initialized
*/
uint32_t LL_I2C_DeInit(I2C_TypeDef *I2Cx)
{
ErrorStatus status = SUCCESS;
/* Check the I2C Instance I2Cx */
assert_param(IS_I2C_ALL_INSTANCE(I2Cx));
if (I2Cx == I2C1)
{
/* Force reset of I2C clock */
LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1);
/* Release reset of I2C clock */
LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1);
}
#if defined(I2C2)
else if (I2Cx == I2C2)
{
/* Force reset of I2C clock */
LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C2);
/* Release reset of I2C clock */
LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C2);
}
#endif
else
{
status = ERROR;
}
return status;
}
/**
* @brief Initialize the I2C registers according to the specified parameters in I2C_InitStruct.
* @param I2Cx I2C Instance.
* @param I2C_InitStruct pointer to a @ref LL_I2C_InitTypeDef structure.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: I2C registers are initialized
* - ERROR: Not applicable
*/
uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct)
{
/* Check the I2C Instance I2Cx */
assert_param(IS_I2C_ALL_INSTANCE(I2Cx));
/* Check the I2C parameters from I2C_InitStruct */
assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode));
assert_param(IS_LL_I2C_ANALOG_FILTER(I2C_InitStruct->AnalogFilter));
assert_param(IS_LL_I2C_DIGITAL_FILTER(I2C_InitStruct->DigitalFilter));
assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1));
assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge));
assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize));
/* Disable the selected I2Cx Peripheral */
LL_I2C_Disable(I2Cx);
/*---------------------------- I2Cx CR1 Configuration ------------------------
* Configure the analog and digital noise filters with parameters :
* - AnalogFilter: I2C_CR1_ANFOFF bit
* - DigitalFilter: I2C_CR1_DNF[3:0] bits
*/
LL_I2C_ConfigFilters(I2Cx, I2C_InitStruct->AnalogFilter, I2C_InitStruct->DigitalFilter);
/*---------------------------- I2Cx TIMINGR Configuration --------------------
* Configure the SDA setup, hold time and the SCL high, low period with parameter :
* - Timing: I2C_TIMINGR_PRESC[3:0], I2C_TIMINGR_SCLDEL[3:0], I2C_TIMINGR_SDADEL[3:0],
* I2C_TIMINGR_SCLH[7:0] and I2C_TIMINGR_SCLL[7:0] bits
*/
LL_I2C_SetTiming(I2Cx, I2C_InitStruct->Timing);
/* Enable the selected I2Cx Peripheral */
LL_I2C_Enable(I2Cx);
/*---------------------------- I2Cx OAR1 Configuration -----------------------
* Disable, Configure and Enable I2Cx device own address 1 with parameters :
* - OwnAddress1: I2C_OAR1_OA1[9:0] bits
* - OwnAddrSize: I2C_OAR1_OA1MODE bit
*/
LL_I2C_DisableOwnAddress1(I2Cx);
LL_I2C_SetOwnAddress1(I2Cx, I2C_InitStruct->OwnAddress1, I2C_InitStruct->OwnAddrSize);
/* OwnAdress1 == 0 is reserved for General Call address */
if (I2C_InitStruct->OwnAddress1 != 0U)
{
LL_I2C_EnableOwnAddress1(I2Cx);
}
/*---------------------------- I2Cx MODE Configuration -----------------------
* Configure I2Cx peripheral mode with parameter :
* - PeripheralMode: I2C_CR1_SMBDEN and I2C_CR1_SMBHEN bits
*/
LL_I2C_SetMode(I2Cx, I2C_InitStruct->PeripheralMode);
/*---------------------------- I2Cx CR2 Configuration ------------------------
* Configure the ACKnowledge or Non ACKnowledge condition
* after the address receive match code or next received byte with parameter :
* - TypeAcknowledge: I2C_CR2_NACK bit
*/
LL_I2C_AcknowledgeNextData(I2Cx, I2C_InitStruct->TypeAcknowledge);
return SUCCESS;
}
/**
* @brief Set each @ref LL_I2C_InitTypeDef field to default value.
* @param I2C_InitStruct Pointer to a @ref LL_I2C_InitTypeDef structure.
* @retval None
*/
void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct)
{
/* Set I2C_InitStruct fields to default values */
I2C_InitStruct->PeripheralMode = LL_I2C_MODE_I2C;
I2C_InitStruct->Timing = 0U;
I2C_InitStruct->AnalogFilter = LL_I2C_ANALOGFILTER_ENABLE;
I2C_InitStruct->DigitalFilter = 0U;
I2C_InitStruct->OwnAddress1 = 0U;
I2C_InitStruct->TypeAcknowledge = LL_I2C_NACK;
I2C_InitStruct->OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* I2C1 || I2C2 */
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/