GEX port to STM32F072. This is currently the main port.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
gex-f072/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h

862 lines
37 KiB

7 years ago
/**
******************************************************************************
* @file stm32f0xx_ll_bus.h
* @author MCD Application Team
* @brief Header file of BUS LL module.
@verbatim
##### RCC Limitations #####
==============================================================================
[..]
A delay between an RCC peripheral clock enable and the effective peripheral
enabling should be taken into account in order to manage the peripheral read/write
from/to registers.
(+) This delay depends on the peripheral mapping.
(++) AHB & APB peripherals, 1 dummy read is necessary
[..]
Workarounds:
(#) For AHB & APB peripherals, a dummy read to the peripheral register has been
inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_LL_BUS_H
#define __STM32F0xx_LL_BUS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined(RCC)
/** @defgroup BUS_LL BUS
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
* @{
*/
/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
* @{
*/
#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN
#if defined(DMA2)
#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN
#endif /*DMA2*/
#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBENR_SRAMEN
#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLITFEN
#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN
#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHBENR_GPIOAEN
#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHBENR_GPIOBEN
#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHBENR_GPIOCEN
#if defined(GPIOD)
#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHBENR_GPIODEN
#endif /*GPIOD*/
#if defined(GPIOE)
#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHBENR_GPIOEEN
#endif /*GPIOE*/
#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHBENR_GPIOFEN
#if defined(TSC)
#define LL_AHB1_GRP1_PERIPH_TSC RCC_AHBENR_TSCEN
#endif /*TSC*/
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
* @{
*/
#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
#if defined(TIM2)
#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN
#endif /*TIM2*/
#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN
#if defined(TIM6)
#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN
#endif /*TIM6*/
#if defined(TIM7)
#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN
#endif /*TIM7*/
#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN
#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN
#if defined(SPI2)
#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN
#endif /*SPI2*/
#if defined(USART2)
#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN
#endif /* USART2 */
#if defined(USART3)
#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN
#endif /* USART3 */
#if defined(USART4)
#define LL_APB1_GRP1_PERIPH_USART4 RCC_APB1ENR_USART4EN
#endif /* USART4 */
#if defined(USART5)
#define LL_APB1_GRP1_PERIPH_USART5 RCC_APB1ENR_USART5EN
#endif /* USART5 */
#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN
#if defined(I2C2)
#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN
#endif /*I2C2*/
#if defined(USB)
#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN
#endif /* USB */
#if defined(CAN)
#define LL_APB1_GRP1_PERIPH_CAN RCC_APB1ENR_CANEN
#endif /*CAN*/
#if defined(CRS)
#define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR_CRSEN
#endif /*CRS*/
#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN
#if defined(DAC)
#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN
#endif /*DAC*/
#if defined(CEC)
#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN
#endif /*CEC*/
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH
* @{
*/
#define LL_APB1_GRP2_PERIPH_ALL (uint32_t)0xFFFFFFFFU
#define LL_APB1_GRP2_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
#define LL_APB1_GRP2_PERIPH_ADC1 RCC_APB2ENR_ADC1EN
#if defined(USART8)
#define LL_APB1_GRP2_PERIPH_USART8 RCC_APB2ENR_USART8EN
#endif /*USART8*/
#if defined(USART7)
#define LL_APB1_GRP2_PERIPH_USART7 RCC_APB2ENR_USART7EN
#endif /*USART7*/
#if defined(USART6)
#define LL_APB1_GRP2_PERIPH_USART6 RCC_APB2ENR_USART6EN
#endif /*USART6*/
#define LL_APB1_GRP2_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
#define LL_APB1_GRP2_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
#define LL_APB1_GRP2_PERIPH_USART1 RCC_APB2ENR_USART1EN
#if defined(TIM15)
#define LL_APB1_GRP2_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
#endif /*TIM15*/
#define LL_APB1_GRP2_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
#define LL_APB1_GRP2_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
#define LL_APB1_GRP2_PERIPH_DBGMCU RCC_APB2ENR_DBGMCUEN
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
* @{
*/
/** @defgroup BUS_LL_EF_AHB1 AHB1
* @{
*/
/**
* @brief Enable AHB1 peripherals clock.
* @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n
* AHBENR DMA2EN LL_AHB1_GRP1_EnableClock\n
* AHBENR SRAMEN LL_AHB1_GRP1_EnableClock\n
* AHBENR FLITFEN LL_AHB1_GRP1_EnableClock\n
* AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIOAEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIOBEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIOCEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIODEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIOEEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIOFEN LL_AHB1_GRP1_EnableClock\n
* AHBENR TSCEN LL_AHB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHBENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHBENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB1 peripheral clock is enabled or not
* @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR SRAMEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR FLITFEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR TSCEN LL_AHB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->AHBENR, Periphs) == Periphs);
}
/**
* @brief Disable AHB1 peripherals clock.
* @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n
* AHBENR DMA2EN LL_AHB1_GRP1_DisableClock\n
* AHBENR SRAMEN LL_AHB1_GRP1_DisableClock\n
* AHBENR FLITFEN LL_AHB1_GRP1_DisableClock\n
* AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIOCEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIODEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIOEEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIOFEN LL_AHB1_GRP1_DisableClock\n
* AHBENR TSCEN LL_AHB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHBENR, Periphs);
}
/**
* @brief Force AHB1 peripherals reset.
* @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR GPIODRST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR GPIOERST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR TSCRST LL_AHB1_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHBRSTR, Periphs);
}
/**
* @brief Release AHB1 peripherals reset.
* @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR TSCRST LL_AHB1_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHBRSTR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB1_GRP1 APB1 GRP1
* @{
*/
/**
* @brief Enable APB1 peripherals clock (available in register 1).
* @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n
* APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n
* APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USART4EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USART5EN LL_APB1_GRP1_EnableClock\n
* APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n
* APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USBEN LL_APB1_GRP1_EnableClock\n
* APB1ENR CANEN LL_APB1_GRP1_EnableClock\n
* APB1ENR CRSEN LL_APB1_GRP1_EnableClock\n
* APB1ENR PWREN LL_APB1_GRP1_EnableClock\n
* APB1ENR DACEN LL_APB1_GRP1_EnableClock\n
* APB1ENR CECEN LL_APB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB1 peripheral clock is enabled or not (available in register 1).
* @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USART4EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USART5EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR CANEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR CRSEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs);
}
/**
* @brief Disable APB1 peripherals clock (available in register 1).
* @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n
* APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n
* APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USART4EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USART5EN LL_APB1_GRP1_DisableClock\n
* APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n
* APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USBEN LL_APB1_GRP1_DisableClock\n
* APB1ENR CANEN LL_APB1_GRP1_DisableClock\n
* APB1ENR CRSEN LL_APB1_GRP1_DisableClock\n
* APB1ENR PWREN LL_APB1_GRP1_DisableClock\n
* APB1ENR DACEN LL_APB1_GRP1_DisableClock\n
* APB1ENR CECEN LL_APB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1ENR, Periphs);
}
/**
* @brief Force APB1 peripherals reset (available in register 1).
* @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USART4RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USART5RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR CANRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR CRSRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR CECRST LL_APB1_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_ALL
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB1RSTR, Periphs);
}
/**
* @brief Release APB1 peripherals reset (available in register 1).
* @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USART4RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USART5RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR CANRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR CRSRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_ALL
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1RSTR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB1_GRP2 APB1 GRP2
* @{
*/
/**
* @brief Enable APB1 peripherals clock (available in register 2).
* @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_EnableClock\n
* APB2ENR ADC1EN LL_APB1_GRP2_EnableClock\n
* APB2ENR USART8EN LL_APB1_GRP2_EnableClock\n
* APB2ENR USART7EN LL_APB1_GRP2_EnableClock\n
* APB2ENR USART6EN LL_APB1_GRP2_EnableClock\n
* APB2ENR TIM1EN LL_APB1_GRP2_EnableClock\n
* APB2ENR SPI1EN LL_APB1_GRP2_EnableClock\n
* APB2ENR USART1EN LL_APB1_GRP2_EnableClock\n
* APB2ENR TIM15EN LL_APB1_GRP2_EnableClock\n
* APB2ENR TIM16EN LL_APB1_GRP2_EnableClock\n
* APB2ENR TIM17EN LL_APB1_GRP2_EnableClock\n
* APB2ENR DBGMCUEN LL_APB1_GRP2_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
* @arg @ref LL_APB1_GRP2_PERIPH_ADC1
* @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM1
* @arg @ref LL_APB1_GRP2_PERIPH_SPI1
* @arg @ref LL_APB1_GRP2_PERIPH_USART1
* @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM16
* @arg @ref LL_APB1_GRP2_PERIPH_TIM17
* @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB1 peripheral clock is enabled or not (available in register 2).
* @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR ADC1EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR USART8EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR USART7EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR USART6EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR TIM1EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR SPI1EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR USART1EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR TIM15EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR TIM16EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR TIM17EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR DBGMCUEN LL_APB1_GRP2_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
* @arg @ref LL_APB1_GRP2_PERIPH_ADC1
* @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM1
* @arg @ref LL_APB1_GRP2_PERIPH_SPI1
* @arg @ref LL_APB1_GRP2_PERIPH_USART1
* @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM16
* @arg @ref LL_APB1_GRP2_PERIPH_TIM17
* @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
}
/**
* @brief Disable APB1 peripherals clock (available in register 2).
* @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_DisableClock\n
* APB2ENR ADC1EN LL_APB1_GRP2_DisableClock\n
* APB2ENR USART8EN LL_APB1_GRP2_DisableClock\n
* APB2ENR USART7EN LL_APB1_GRP2_DisableClock\n
* APB2ENR USART6EN LL_APB1_GRP2_DisableClock\n
* APB2ENR TIM1EN LL_APB1_GRP2_DisableClock\n
* APB2ENR SPI1EN LL_APB1_GRP2_DisableClock\n
* APB2ENR USART1EN LL_APB1_GRP2_DisableClock\n
* APB2ENR TIM15EN LL_APB1_GRP2_DisableClock\n
* APB2ENR TIM16EN LL_APB1_GRP2_DisableClock\n
* APB2ENR TIM17EN LL_APB1_GRP2_DisableClock\n
* APB2ENR DBGMCUEN LL_APB1_GRP2_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
* @arg @ref LL_APB1_GRP2_PERIPH_ADC1
* @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM1
* @arg @ref LL_APB1_GRP2_PERIPH_SPI1
* @arg @ref LL_APB1_GRP2_PERIPH_USART1
* @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM16
* @arg @ref LL_APB1_GRP2_PERIPH_TIM17
* @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2ENR, Periphs);
}
/**
* @brief Force APB1 peripherals reset (available in register 2).
* @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ForceReset\n
* APB2RSTR ADC1RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR USART8RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR USART7RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR USART6RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR TIM1RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR SPI1RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR USART1RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR TIM15RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR TIM16RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR TIM17RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR DBGMCURST LL_APB1_GRP2_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_ALL
* @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
* @arg @ref LL_APB1_GRP2_PERIPH_ADC1
* @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM1
* @arg @ref LL_APB1_GRP2_PERIPH_SPI1
* @arg @ref LL_APB1_GRP2_PERIPH_USART1
* @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM16
* @arg @ref LL_APB1_GRP2_PERIPH_TIM17
* @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @brief Release APB1 peripherals reset (available in register 2).
* @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR ADC1RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR USART8RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR USART7RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR USART6RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR TIM1RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR SPI1RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR USART1RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR TIM15RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR TIM16RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR TIM17RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR DBGMCURST LL_APB1_GRP2_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_ALL
* @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
* @arg @ref LL_APB1_GRP2_PERIPH_ADC1
* @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM1
* @arg @ref LL_APB1_GRP2_PERIPH_SPI1
* @arg @ref LL_APB1_GRP2_PERIPH_USART1
* @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM16
* @arg @ref LL_APB1_GRP2_PERIPH_TIM17
* @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined(RCC) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_LL_BUS_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/