You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
313 lines
13 KiB
313 lines
13 KiB
7 years ago
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file stm32f0xx_hal_gpio.h
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @brief Header file of GPIO HAL module.
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
|
* and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||
|
|
* may be used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||
|
|
#ifndef __STM32F0xx_HAL_GPIO_H
|
||
|
|
#define __STM32F0xx_HAL_GPIO_H
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32f0xx_hal_def.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM32F0xx_HAL_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup GPIO
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported types ------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @defgroup GPIO_Exported_Types GPIO Exported Types
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/**
|
||
|
|
* @brief GPIO Init structure definition
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||
|
|
This parameter can be any value of @ref GPIO_pins */
|
||
|
|
|
||
|
|
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||
|
|
This parameter can be a value of @ref GPIO_mode */
|
||
|
|
|
||
|
|
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
|
||
|
|
This parameter can be a value of @ref GPIO_pull */
|
||
|
|
|
||
|
|
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
||
|
|
This parameter can be a value of @ref GPIO_speed */
|
||
|
|
|
||
|
|
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
|
||
|
|
This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
|
||
|
|
}GPIO_InitTypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief GPIO Bit SET and Bit RESET enumeration
|
||
|
|
*/
|
||
|
|
typedef enum
|
||
|
|
{
|
||
|
|
GPIO_PIN_RESET = 0U,
|
||
|
|
GPIO_PIN_SET
|
||
|
|
}GPIO_PinState;
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported constants --------------------------------------------------------*/
|
||
|
|
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/** @defgroup GPIO_pins GPIO pins
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */
|
||
|
|
#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */
|
||
|
|
#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */
|
||
|
|
#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */
|
||
|
|
#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */
|
||
|
|
#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */
|
||
|
|
#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */
|
||
|
|
#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */
|
||
|
|
#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */
|
||
|
|
#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */
|
||
|
|
#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */
|
||
|
|
#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */
|
||
|
|
#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */
|
||
|
|
#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */
|
||
|
|
#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */
|
||
|
|
#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */
|
||
|
|
#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */
|
||
|
|
|
||
|
|
#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup GPIO_mode GPIO mode
|
||
|
|
* @brief GPIO Configuration Mode
|
||
|
|
* Elements values convention: 0xX0yz00YZ
|
||
|
|
* - X : GPIO mode or EXTI Mode
|
||
|
|
* - y : External IT or Event trigger detection
|
||
|
|
* - z : IO configuration on External IT or Event
|
||
|
|
* - Y : Output type (Push Pull or Open Drain)
|
||
|
|
* - Z : IO Direction mode (Input, Output, Alternate or Analog)
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define GPIO_MODE_INPUT (0x00000000U) /*!< Input Floating Mode */
|
||
|
|
#define GPIO_MODE_OUTPUT_PP (0x00000001U) /*!< Output Push Pull Mode */
|
||
|
|
#define GPIO_MODE_OUTPUT_OD (0x00000011U) /*!< Output Open Drain Mode */
|
||
|
|
#define GPIO_MODE_AF_PP (0x00000002U) /*!< Alternate Function Push Pull Mode */
|
||
|
|
#define GPIO_MODE_AF_OD (0x00000012U) /*!< Alternate Function Open Drain Mode */
|
||
|
|
#define GPIO_MODE_ANALOG (0x00000003U) /*!< Analog Mode */
|
||
|
|
#define GPIO_MODE_IT_RISING (0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
|
||
|
|
#define GPIO_MODE_IT_FALLING (0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
|
||
|
|
#define GPIO_MODE_IT_RISING_FALLING (0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||
|
|
#define GPIO_MODE_EVT_RISING (0x10120000U) /*!< External Event Mode with Rising edge trigger detection */
|
||
|
|
#define GPIO_MODE_EVT_FALLING (0x10220000U) /*!< External Event Mode with Falling edge trigger detection */
|
||
|
|
#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup GPIO_speed GPIO speed
|
||
|
|
* @brief GPIO Output Maximum frequency
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 2 MHz, please refer to the product datasheet */
|
||
|
|
#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 4 MHz to 10 MHz, please refer to the product datasheet */
|
||
|
|
#define GPIO_SPEED_FREQ_HIGH (0x00000003U) /*!< range 10 MHz to 50 MHz, please refer to the product datasheet */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup GPIO_pull GPIO pull
|
||
|
|
* @brief GPIO Pull-Up or Pull-Down Activation
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */
|
||
|
|
#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */
|
||
|
|
#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported macro ------------------------------------------------------------*/
|
||
|
|
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the specified EXTI line flag is set or not.
|
||
|
|
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
|
||
|
|
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||
|
|
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||
|
|
*/
|
||
|
|
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear the EXTI's line pending flags.
|
||
|
|
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
|
||
|
|
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the specified EXTI line is asserted or not.
|
||
|
|
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||
|
|
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||
|
|
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||
|
|
*/
|
||
|
|
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear the EXTI's line pending bits.
|
||
|
|
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
|
||
|
|
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Generate a Software interrupt on selected EXTI line.
|
||
|
|
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||
|
|
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private macros ------------------------------------------------------------*/
|
||
|
|
/** @addtogroup GPIO_Private_Macros GPIO Private Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
|
||
|
|
|
||
|
|
#define IS_GPIO_PIN(__PIN__) ((((__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
|
||
|
|
(((__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
|
||
|
|
|
||
|
|
#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
|
||
|
|
((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
|
||
|
|
((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
|
||
|
|
((__MODE__) == GPIO_MODE_AF_PP) ||\
|
||
|
|
((__MODE__) == GPIO_MODE_AF_OD) ||\
|
||
|
|
((__MODE__) == GPIO_MODE_IT_RISING) ||\
|
||
|
|
((__MODE__) == GPIO_MODE_IT_FALLING) ||\
|
||
|
|
((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
|
||
|
|
((__MODE__) == GPIO_MODE_EVT_RISING) ||\
|
||
|
|
((__MODE__) == GPIO_MODE_EVT_FALLING) ||\
|
||
|
|
((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
|
||
|
|
((__MODE__) == GPIO_MODE_ANALOG))
|
||
|
|
|
||
|
|
#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\
|
||
|
|
((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\
|
||
|
|
((__SPEED__) == GPIO_SPEED_FREQ_HIGH))
|
||
|
|
|
||
|
|
#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\
|
||
|
|
((__PULL__) == GPIO_PULLUP) || \
|
||
|
|
((__PULL__) == GPIO_PULLDOWN))
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Include GPIO HAL Extended module */
|
||
|
|
#include "stm32f0xx_hal_gpio_ex.h"
|
||
|
|
|
||
|
|
/* Exported functions --------------------------------------------------------*/
|
||
|
|
/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
|
||
|
|
* @brief Initialization and Configuration functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Initialization and de-initialization functions *****************************/
|
||
|
|
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
|
||
|
|
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* IO operation functions *****************************************************/
|
||
|
|
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||
|
|
void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
|
||
|
|
void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||
|
|
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||
|
|
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
|
||
|
|
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* __STM32F0xx_HAL_GPIO_H */
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|