You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
663 lines
27 KiB
663 lines
27 KiB
7 years ago
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file stm32f0xx_hal_comp.h
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @brief Header file of COMP HAL module.
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
|
* and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||
|
|
* may be used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||
|
|
#ifndef __STM32F0xx_HAL_COMP_H
|
||
|
|
#define __STM32F0xx_HAL_COMP_H
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined(STM32F051x8) || defined(STM32F058xx) || \
|
||
|
|
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
|
||
|
|
defined(STM32F091xC) || defined(STM32F098xx)
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32f0xx_hal_def.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM32F0xx_HAL_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup COMP COMP
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported types ------------------------------------------------------------*/
|
||
|
|
/** @defgroup COMP_Exported_Types COMP Exported Types
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief COMP Init structure definition
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
|
||
|
|
uint32_t InvertingInput; /*!< Selects the inverting input of the comparator.
|
||
|
|
This parameter can be a value of @ref COMP_InvertingInput */
|
||
|
|
|
||
|
|
uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator.
|
||
|
|
This parameter can be a value of @ref COMP_NonInvertingInput */
|
||
|
|
|
||
|
|
uint32_t Output; /*!< Selects the output redirection of the comparator.
|
||
|
|
This parameter can be a value of @ref COMP_Output */
|
||
|
|
|
||
|
|
uint32_t OutputPol; /*!< Selects the output polarity of the comparator.
|
||
|
|
This parameter can be a value of @ref COMP_OutputPolarity */
|
||
|
|
|
||
|
|
uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator.
|
||
|
|
This parameter can be a value of @ref COMP_Hysteresis */
|
||
|
|
|
||
|
|
uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator
|
||
|
|
to adjust the speed/consumption.
|
||
|
|
This parameter can be a value of @ref COMP_Mode */
|
||
|
|
|
||
|
|
uint32_t WindowMode; /*!< Selects the window mode of the comparator 1 & 2.
|
||
|
|
This parameter can be a value of @ref COMP_WindowMode */
|
||
|
|
|
||
|
|
uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode).
|
||
|
|
This parameter can be a value of @ref COMP_TriggerMode */
|
||
|
|
|
||
|
|
}COMP_InitTypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief COMP Handle Structure definition
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
COMP_TypeDef *Instance; /*!< Register base address */
|
||
|
|
COMP_InitTypeDef Init; /*!< COMP required parameters */
|
||
|
|
HAL_LockTypeDef Lock; /*!< Locking object */
|
||
|
|
__IO uint32_t State; /*!< COMP communication state
|
||
|
|
This parameter can be a value of @ref COMP_State */
|
||
|
|
}COMP_HandleTypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported constants --------------------------------------------------------*/
|
||
|
|
/** @defgroup COMP_Exported_Constants COMP Exported Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_State COMP State
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define HAL_COMP_STATE_RESET (0x00000000U) /*!< COMP not yet initialized or disabled */
|
||
|
|
#define HAL_COMP_STATE_READY (0x00000001U) /*!< COMP initialized and ready for use */
|
||
|
|
#define HAL_COMP_STATE_READY_LOCKED (0x00000011U) /*!< COMP initialized but the configuration is locked */
|
||
|
|
#define HAL_COMP_STATE_BUSY (0x00000002U) /*!< COMP is running */
|
||
|
|
#define HAL_COMP_STATE_BUSY_LOCKED (0x00000012U) /*!< COMP is running and the configuration is locked */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_OutputPolarity COMP OutputPolarity
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define COMP_OUTPUTPOL_NONINVERTED (0x00000000U) /*!< COMP output on GPIO isn't inverted */
|
||
|
|
#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMP1POL /*!< COMP output on GPIO is inverted */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_Hysteresis COMP Hysteresis
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define COMP_HYSTERESIS_NONE (0x00000000U) /*!< No hysteresis */
|
||
|
|
#define COMP_HYSTERESIS_LOW COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */
|
||
|
|
#define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */
|
||
|
|
#define COMP_HYSTERESIS_HIGH COMP_CSR_COMP1HYST /*!< Hysteresis level high */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_Mode COMP Mode
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Please refer to the electrical characteristics in the device datasheet for
|
||
|
|
the power consumption values */
|
||
|
|
#define COMP_MODE_HIGHSPEED (0x00000000U) /*!< High Speed */
|
||
|
|
#define COMP_MODE_MEDIUMSPEED COMP_CSR_COMP1MODE_0 /*!< Medium Speed */
|
||
|
|
#define COMP_MODE_LOWPOWER COMP_CSR_COMP1MODE_1 /*!< Low power mode */
|
||
|
|
#define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMP1MODE /*!< Ultra-low power mode */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_InvertingInput COMP InvertingInput
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define COMP_INVERTINGINPUT_1_4VREFINT (0x00000000U) /*!< 1/4 VREFINT connected to comparator inverting input */
|
||
|
|
#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMP1INSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
|
||
|
|
#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMP1INSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
|
||
|
|
#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMP1INSEL_1|COMP_CSR_COMP1INSEL_0) /*!< VREFINT connected to comparator inverting input */
|
||
|
|
#define COMP_INVERTINGINPUT_DAC1 COMP_CSR_COMP1INSEL_2 /*!< DAC_OUT1 (PA4) connected to comparator inverting input */
|
||
|
|
#define COMP_INVERTINGINPUT_DAC1SWITCHCLOSED (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1SW1) /*!< DAC_OUT1 (PA4) connected to comparator inverting input
|
||
|
|
and close switch (PA0 for COMP1 only) */
|
||
|
|
#define COMP_INVERTINGINPUT_DAC2 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_0) /*!< DAC_OUT2 (PA5) connected to comparator inverting input */
|
||
|
|
#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_1) /*!< IO (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_NonInvertingInput COMP NonInvertingInput
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define COMP_NONINVERTINGINPUT_IO1 (0x00000000U) /*!< I/O1 (PA1 for COMP1, PA3 for COMP2)
|
||
|
|
connected to comparator non inverting input */
|
||
|
|
#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_Output COMP Output
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Output Redirection common for COMP1 and COMP2 */
|
||
|
|
#define COMP_OUTPUT_NONE (0x00000000U) /*!< COMP output isn't connected to other peripherals */
|
||
|
|
#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMP1OUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
|
||
|
|
#define COMP_OUTPUT_TIM1IC1 COMP_CSR_COMP1OUTSEL_1 /*!< COMP output connected to TIM1 Input Capture 1 */
|
||
|
|
#define COMP_OUTPUT_TIM1OCREFCLR (COMP_CSR_COMP1OUTSEL_1|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM1 OCREF Clear */
|
||
|
|
#define COMP_OUTPUT_TIM2IC4 COMP_CSR_COMP1OUTSEL_2 /*!< COMP output connected to TIM2 Input Capture 4 */
|
||
|
|
#define COMP_OUTPUT_TIM2OCREFCLR (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM2 OCREF Clear */
|
||
|
|
#define COMP_OUTPUT_TIM3IC1 (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_1) /*!< COMP output connected to TIM3 Input Capture 1 */
|
||
|
|
#define COMP_OUTPUT_TIM3OCREFCLR COMP_CSR_COMP1OUTSEL /*!< COMP output connected to TIM3 OCREF Clear */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_OutputLevel COMP OutputLevel
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* When output polarity is not inverted, comparator output is low when
|
||
|
|
the non-inverting input is at a lower voltage than the inverting input*/
|
||
|
|
#define COMP_OUTPUTLEVEL_LOW (0x00000000U)
|
||
|
|
/* When output polarity is not inverted, comparator output is high when
|
||
|
|
the non-inverting input is at a higher voltage than the inverting input */
|
||
|
|
#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMP1OUT
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_TriggerMode COMP TriggerMode
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define COMP_TRIGGERMODE_NONE (0x00000000U) /*!< No External Interrupt trigger detection */
|
||
|
|
#define COMP_TRIGGERMODE_IT_RISING (0x00000001U) /*!< External Interrupt Mode with Rising edge trigger detection */
|
||
|
|
#define COMP_TRIGGERMODE_IT_FALLING (0x00000002U) /*!< External Interrupt Mode with Falling edge trigger detection */
|
||
|
|
#define COMP_TRIGGERMODE_IT_RISING_FALLING (0x00000003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||
|
|
#define COMP_TRIGGERMODE_EVENT_RISING (0x00000010U) /*!< Event Mode with Rising edge trigger detection */
|
||
|
|
#define COMP_TRIGGERMODE_EVENT_FALLING (0x00000020U) /*!< Event Mode with Falling edge trigger detection */
|
||
|
|
#define COMP_TRIGGERMODE_EVENT_RISING_FALLING (0x00000030U) /*!< Event Mode with Rising/Falling edge trigger detection */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_WindowMode COMP WindowMode
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define COMP_WINDOWMODE_DISABLE (0x00000000U) /*!< Window mode disabled */
|
||
|
|
#define COMP_WINDOWMODE_ENABLE COMP_CSR_WNDWEN /*!< Window mode enabled: non inverting input of comparator 2
|
||
|
|
is connected to the non inverting input of comparator 1 (PA1) */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_Flag COMP Flag
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define COMP_FLAG_LOCK ((uint32_t)COMP_CSR_COMPxLOCK) /*!< Lock flag */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported macros -----------------------------------------------------------*/
|
||
|
|
/** @defgroup COMP_Exported_Macros COMP Exported Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @brief Reset COMP handle state
|
||
|
|
* @param __HANDLE__ COMP handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the specified comparator.
|
||
|
|
* @param __HANDLE__ COMP handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \
|
||
|
|
SET_BIT(COMP->CSR, COMP_CSR_COMP1EN) : \
|
||
|
|
SET_BIT(COMP->CSR, COMP_CSR_COMP2EN))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the specified comparator.
|
||
|
|
* @param __HANDLE__ COMP handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \
|
||
|
|
CLEAR_BIT(COMP->CSR, COMP_CSR_COMP1EN) : \
|
||
|
|
CLEAR_BIT(COMP->CSR, COMP_CSR_COMP2EN))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Lock the specified comparator configuration.
|
||
|
|
* @param __HANDLE__ COMP handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_LOCK(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \
|
||
|
|
SET_BIT(COMP->CSR, COMP_CSR_COMP1LOCK) : \
|
||
|
|
SET_BIT(COMP->CSR, COMP_CSR_COMP2LOCK))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the COMP1 EXTI line rising edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the COMP1 EXTI line rising edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the COMP1 EXTI line falling edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the COMP1 EXTI line falling edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the COMP1 EXTI line rising & falling edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
|
||
|
|
__HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE(); \
|
||
|
|
__HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE(); \
|
||
|
|
} while(0)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the COMP1 EXTI line rising & falling edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
|
||
|
|
__HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE(); \
|
||
|
|
__HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE(); \
|
||
|
|
} while(0)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the COMP1 EXTI line in interrupt mode.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the COMP1 EXTI line in interrupt mode.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Generate a software interrupt on the COMP1 EXTI line.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP1)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the COMP1 EXTI Line in event mode.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the COMP1 EXTI Line in event mode.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the COMP1 EXTI line flag is set or not.
|
||
|
|
* @retval RESET or SET
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP1)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear the COMP1 EXTI flag.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP1)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the COMP2 EXTI line rising edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the COMP2 EXTI line rising edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the COMP2 EXTI line falling edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the COMP2 EXTI line falling edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the COMP2 EXTI line rising & falling edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
|
||
|
|
__HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE(); \
|
||
|
|
__HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE(); \
|
||
|
|
} while(0)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the COMP2 EXTI line rising & falling edge trigger.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
|
||
|
|
__HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE(); \
|
||
|
|
__HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE(); \
|
||
|
|
} while(0)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the COMP2 EXTI line in interrupt mode.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the COMP2 EXTI line in interrupt mode.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Generate a software interrupt on the COMP2 EXTI line.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the COMP2 EXTI Line in event mode.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the COMP2 EXTI Line in event mode.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the COMP2 EXTI line flag is set or not.
|
||
|
|
* @retval RESET or SET
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear the COMP2 EXTI flag.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP2)
|
||
|
|
|
||
|
|
/** @brief Check whether the specified COMP flag is set or not.
|
||
|
|
* @param __HANDLE__ specifies the COMP Handle.
|
||
|
|
* @param __FLAG__ specifies the flag to check.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg COMP_FLAG_LOCK: lock flag
|
||
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||
|
|
*/
|
||
|
|
#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->CSR & (__FLAG__)) == (__FLAG__))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported functions --------------------------------------------------------*/
|
||
|
|
/** @addtogroup COMP_Exported_Functions COMP Exported Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/** @addtogroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions
|
||
|
|
* @brief Initialization and Configuration functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Initialization and de-initialization functions ****************************/
|
||
|
|
HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp);
|
||
|
|
HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp);
|
||
|
|
void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp);
|
||
|
|
void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup COMP_Exported_Functions_Group2 I/O operation functions
|
||
|
|
* @brief Data transfers functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* IO operation functions *****************************************************/
|
||
|
|
HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp);
|
||
|
|
HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp);
|
||
|
|
HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp);
|
||
|
|
HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp);
|
||
|
|
void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup COMP_Exported_Functions_Group3 Peripheral Control functions
|
||
|
|
* @brief management functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Peripheral Control functions ***********************************************/
|
||
|
|
HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
|
||
|
|
uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
|
||
|
|
|
||
|
|
/* Callback in Interrupt mode */
|
||
|
|
void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup COMP_Exported_Functions_Group4 Peripheral State functions
|
||
|
|
* @brief Peripheral State functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Peripheral State and Error functions ***************************************/
|
||
|
|
uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private types -------------------------------------------------------------*/
|
||
|
|
/* Private constants ---------------------------------------------------------*/
|
||
|
|
/** @defgroup COMP_Private_Constants COMP Private Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/** @defgroup COMP_ExtiLine COMP EXTI Lines
|
||
|
|
* Elements values convention: XXXX0000
|
||
|
|
* - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define COMP_EXTI_LINE_COMP1 ((uint32_t)EXTI_IMR_MR21) /*!< EXTI line 21 connected to COMP1 output */
|
||
|
|
#define COMP_EXTI_LINE_COMP2 ((uint32_t)EXTI_IMR_MR22) /*!< EXTI line 22 connected to COMP2 output */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private macros ------------------------------------------------------------*/
|
||
|
|
/** @defgroup COMP_Private_Macros COMP Private Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/** @defgroup COMP_GET_EXTI_LINE COMP Private macros to get EXTI line associated with Comparators
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/**
|
||
|
|
* @brief Get the specified EXTI line for a comparator instance.
|
||
|
|
* @param __INSTANCE__ specifies the COMP instance.
|
||
|
|
* @retval value of @ref COMP_ExtiLine
|
||
|
|
*/
|
||
|
|
#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 : \
|
||
|
|
COMP_EXTI_LINE_COMP2)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_IS_COMP_Definitions COMP Private macros to check input parameters
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \
|
||
|
|
((POL) == COMP_OUTPUTPOL_INVERTED))
|
||
|
|
|
||
|
|
#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \
|
||
|
|
((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \
|
||
|
|
((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \
|
||
|
|
((HYSTERESIS) == COMP_HYSTERESIS_HIGH))
|
||
|
|
|
||
|
|
#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \
|
||
|
|
((MODE) == COMP_MODE_MEDIUMSPEED) || \
|
||
|
|
((MODE) == COMP_MODE_LOWPOWER) || \
|
||
|
|
((MODE) == COMP_MODE_ULTRALOWPOWER))
|
||
|
|
|
||
|
|
#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
|
||
|
|
((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
|
||
|
|
((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
|
||
|
|
((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
|
||
|
|
((INPUT) == COMP_INVERTINGINPUT_DAC1) || \
|
||
|
|
((INPUT) == COMP_INVERTINGINPUT_DAC1SWITCHCLOSED) || \
|
||
|
|
((INPUT) == COMP_INVERTINGINPUT_DAC2) || \
|
||
|
|
((INPUT) == COMP_INVERTINGINPUT_IO1))
|
||
|
|
|
||
|
|
#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
|
||
|
|
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
|
||
|
|
|
||
|
|
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
|
||
|
|
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
|
||
|
|
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
|
||
|
|
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
|
||
|
|
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
|
||
|
|
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
|
||
|
|
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
|
||
|
|
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))
|
||
|
|
|
||
|
|
#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLE) || \
|
||
|
|
((WINDOWMODE) == COMP_WINDOWMODE_ENABLE))
|
||
|
|
|
||
|
|
#define IS_COMP_TRIGGERMODE(__MODE__) (((__MODE__) == COMP_TRIGGERMODE_NONE) || \
|
||
|
|
((__MODE__) == COMP_TRIGGERMODE_IT_RISING) || \
|
||
|
|
((__MODE__) == COMP_TRIGGERMODE_IT_FALLING) || \
|
||
|
|
((__MODE__) == COMP_TRIGGERMODE_IT_RISING_FALLING) || \
|
||
|
|
((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING) || \
|
||
|
|
((__MODE__) == COMP_TRIGGERMODE_EVENT_FALLING) || \
|
||
|
|
((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING_FALLING))
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup COMP_Lock COMP Lock
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define COMP_LOCK_DISABLE (0x00000000U)
|
||
|
|
#define COMP_LOCK_ENABLE COMP_CSR_COMP1LOCK
|
||
|
|
|
||
|
|
#define COMP_STATE_BIT_LOCK (0x10U)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private functions ---------------------------------------------------------*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#endif /* STM32F051x8 || STM32F058xx || */
|
||
|
|
/* STM32F071xB || STM32F072xB || STM32F078xx || */
|
||
|
|
/* STM32F091xC || STM32F098xx */
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* __STM32F0xx_HAL_COMP_H */
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||
|
|
|