GEX port to STM32F072. This is currently the main port.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
gex-f072/GexUnits/fcap/_fcap_init.c

148 lines
3.8 KiB

//
// Created by MightyPork on 2018/02/03.
//
#include "platform.h"
#include "unit_base.h"
#define FCAP_INTERNAL
#include "_fcap_internal.h"
/** Allocate data structure and set defaults */
error_t UFCAP_preInit(Unit *unit)
{
struct priv *priv = unit->data = calloc_ck(1, sizeof(struct priv));
if (priv == NULL) return E_OUT_OF_MEM;
priv->conf.signal_pname = 'A';
priv->conf.signal_pnum = 0;
priv->conf.active_level = 1;
priv->conf.direct_presc = 1;
priv->conf.dfilter = 0;
priv->conf.direct_msec = 1000;
priv->conf.startmode = OPMODE_IDLE;
return E_SUCCESS;
}
/** Finalize unit set-up */
error_t UFCAP_init(Unit *unit)
{
bool suc = true;
struct priv *priv = unit->data;
// ---- Resolve what to configure ----
TIM_TypeDef * const TIMx = TIM2;
Resource timRsc = R_TIM2;
TIM_TypeDef * const TIMy = TIM14;
Resource tim2Rsc = R_TIM14;
uint32_t ll_ch_a = 0;
uint32_t ll_ch_b = 0;
switch (priv->conf.signal_pname) {
case 'A':
switch (priv->conf.signal_pnum) {
case 5:
case 15:
case 0: ll_ch_a = LL_TIM_CHANNEL_CH1; break;
case 1: ll_ch_a = LL_TIM_CHANNEL_CH2; break;
default:
dbg("Bad signal pin!");
return E_BAD_CONFIG;
}
break;
case 'B':
switch (priv->conf.signal_pnum) {
case 3: ll_ch_a = LL_TIM_CHANNEL_CH2; break;
default:
dbg("Bad signal pin!");
return E_BAD_CONFIG;
}
break;
default:
dbg("Bad signal pin port!");
return E_BAD_CONFIG;
}
const uint32_t ll_timpin_af = LL_GPIO_AF_2;
bool a_direct = true;
switch (ll_ch_a) {
case LL_TIM_CHANNEL_CH1:
ll_ch_b = LL_TIM_CHANNEL_CH2;
break;
case LL_TIM_CHANNEL_CH2:
ll_ch_b = LL_TIM_CHANNEL_CH1;
a_direct = false;
break;
}
// ---- CLAIM ----
TRY(rsc_claim_pin(unit, priv->conf.signal_pname, priv->conf.signal_pnum));
TRY(rsc_claim(unit, timRsc));
TRY(rsc_claim(unit, tim2Rsc));
// ---- INIT ----
assert_param(ll_ch_a != ll_ch_b);
priv->TIMx = TIMx;
priv->TIMy = TIMy;
priv->ll_ch_a = ll_ch_a;
priv->ll_ch_b = ll_ch_b;
priv->a_direct = a_direct;
// Load defaults
priv->active_level = priv->conf.active_level;
priv->direct_presc = priv->conf.direct_presc;
priv->dfilter = priv->conf.dfilter;
priv->direct_msec = priv->conf.direct_msec;
priv->opmode = priv->conf.startmode;
TRY(hw_configure_gpio_af(priv->conf.signal_pname, priv->conf.signal_pnum, ll_timpin_af));
GPIO_TypeDef *gpio = hw_port2periph(priv->conf.signal_pname, &suc);
uint32_t ll_pin = hw_pin2ll(priv->conf.signal_pnum, &suc);
LL_GPIO_SetPinPull(gpio, ll_pin, LL_GPIO_PULL_DOWN); // XXX change to pull-up if the polarity is inverted
hw_periph_clock_enable(TIMx);
hw_periph_clock_enable(TIMy);
irqd_attach(TIMx, UFCAP_TIMxHandler, unit);
irqd_attach(TIMy, UFCAP_TIMyHandler, unit);
UFCAP_SwitchMode(unit, priv->opmode); // switch to the default opmode
return E_SUCCESS;
}
/** Tear down the unit */
void UFCAP_deInit(Unit *unit)
{
struct priv *priv = unit->data;
// de-init peripherals
if (unit->status == E_SUCCESS ) {
UFCAP_SwitchMode(unit, OPMODE_IDLE);
TIM_TypeDef *TIMx = priv->TIMx;
TIM_TypeDef *TIMy = priv->TIMy;
LL_TIM_DeInit(TIMx);
LL_TIM_DeInit(TIMy);
irqd_detach(TIMx, UFCAP_TIMxHandler);
irqd_detach(TIMy, UFCAP_TIMyHandler);
hw_periph_clock_disable(TIMx);
hw_periph_clock_disable(TIMy);
}
// Release all resources, deinit pins
rsc_teardown(unit);
// Free memory
free_ck(unit->data);
}