GEX port to STM32F072. This is currently the main port.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
gex-f072/GexUnits/dout/_dout_init.c

72 lines
1.7 KiB

//
// Created by MightyPork on 2018/02/03.
//
#include "platform.h"
#include "unit_base.h"
#define DOUT_INTERNAL
#include "_dout_internal.h"
/** Allocate data structure and set defaults */
error_t DOut_preInit(Unit *unit)
{
struct priv *priv = unit->data = calloc_ck(1, sizeof(struct priv));
if (priv == NULL) return E_OUT_OF_MEM;
// some defaults
priv->port_name = 'A';
priv->pins = 0x0001;
priv->open_drain = 0x0000;
priv->initial = 0x0000;
return E_SUCCESS;
}
/** Finalize unit set-up */
error_t DOut_init(Unit *unit)
{
bool suc = true;
struct priv *priv = unit->data;
priv->initial &= priv->pins;
priv->open_drain &= priv->pins;
// --- Parse config ---
priv->port = hw_port2periph(priv->port_name, &suc);
if (!suc) return E_BAD_CONFIG;
// Claim all needed pins
TRY(rsc_claim_gpios(unit, priv->port_name, priv->pins));
for (int i = 0; i < 16; i++) {
if (priv->pins & (1 << i)) {
uint32_t ll_pin = hw_pin2ll((uint8_t) i, &suc);
// --- Init hardware ---
LL_GPIO_SetPinMode(priv->port, ll_pin, LL_GPIO_MODE_OUTPUT);
LL_GPIO_SetPinOutputType(priv->port, ll_pin,
(priv->open_drain & (1 << i)) ? LL_GPIO_OUTPUT_OPENDRAIN : LL_GPIO_OUTPUT_PUSHPULL);
LL_GPIO_SetPinSpeed(priv->port, ll_pin, LL_GPIO_SPEED_FREQ_HIGH);
}
}
// Set the initial state
priv->port->ODR &= ~priv->pins;
priv->port->ODR |= priv->initial;
return E_SUCCESS;
}
/** Tear down the unit */
void DOut_deInit(Unit *unit)
{
// pins are de-inited during teardown
// Release all resources
rsc_teardown(unit);
// Free memory
free_ck(unit->data);
}