GEX core repository.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
gex-core/platform/plat_compat.h

104 lines
3.2 KiB

//
// Created by MightyPork on 2017/12/08.
//
#ifndef GEX_PLAT_COMPAT_H
#define GEX_PLAT_COMPAT_H
#if defined(GEX_PLAT_F103_BLUEPILL)
// platform name for the version string
#define GEX_PLATFORM "STM32F103-Bluepill"
// This platform has the Banks field on the Flash config struct for settings save
#define PLAT_FLASHBANKS 1
#include <stm32f1xx.h>
#include <stm32f1xx_hal.h>
#include <stm32f1xx_ll_adc.h>
#include <stm32f1xx_ll_bus.h>
#include <stm32f1xx_ll_cortex.h>
#include <stm32f1xx_ll_crc.h>
#include <stm32f1xx_ll_dac.h>
#include <stm32f1xx_ll_dma.h>
#include <stm32f1xx_ll_exti.h>
#include <stm32f1xx_ll_fsmc.h>
#include <stm32f1xx_ll_gpio.h>
#include <stm32f1xx_ll_i2c.h>
#include <stm32f1xx_ll_iwdg.h>
#include <stm32f1xx_ll_pwr.h>
#include <stm32f1xx_ll_rcc.h>
#include <stm32f1xx_ll_rtc.h>
#include <stm32f1xx_ll_sdmmc.h>
#include <stm32f1xx_ll_spi.h>
#include <stm32f1xx_ll_system.h>
#include <stm32f1xx_ll_tim.h>
#include <stm32f1xx_ll_usart.h>
#include <stm32f1xx_ll_usb.h>
#include <stm32f1xx_ll_utils.h>
#include <stm32f1xx_ll_wwdg.h>
// size, determines position of the flash storage
#define FLASH_SIZE (64*1024)
#define SETTINGS_BLOCK_SIZE (1024*2) // this must be a multiple of FLASH pages
#define SETTINGS_FLASH_ADDR (0x08000000 + FLASH_SIZE - SETTINGS_BLOCK_SIZE)
// Number of GPIO ports A,B,C...
#define PORTS_COUNT 5
// Lock jumper config
#define LOCK_JUMPER_PORT 'C'
#define LOCK_JUMPER_PIN 14
// Status LED config
#define STATUS_LED_PORT 'C'
#define STATUS_LED_PIN 13
#elif defined(GEX_PLAT_F072_DISCOVERY)
// platform name for the version string
#define GEX_PLATFORM "STM32F072-Discovery"
#include <stm32f0xx.h>
#include <stm32f0xx_ll_adc.h>
#include <stm32f0xx_ll_bus.h>
#include <stm32f0xx_ll_comp.h>
#include <stm32f0xx_ll_cortex.h>
#include <stm32f0xx_ll_crc.h>
#include <stm32f0xx_ll_crs.h>
#include <stm32f0xx_ll_dac.h>
#include <stm32f0xx_ll_dma.h>
#include <stm32f0xx_ll_exti.h>
#include <stm32f0xx_ll_gpio.h>
#include <stm32f0xx_ll_i2c.h>
#include <stm32f0xx_ll_iwdg.h>
#include <stm32f0xx_ll_pwr.h>
#include <stm32f0xx_ll_rcc.h>
#include <stm32f0xx_ll_rtc.h>
#include <stm32f0xx_ll_spi.h>
#include <stm32f0xx_ll_system.h>
#include <stm32f0xx_ll_tim.h>
#include <stm32f0xx_ll_usart.h>
#include <stm32f0xx_ll_utils.h>
#include <stm32f0xx_ll_wwdg.h>
// size, determines position of the flash storage
#define FLASH_SIZE (128*1024)
#define SETTINGS_BLOCK_SIZE (1024*2) // this must be a multiple of FLASH pages
#define SETTINGS_FLASH_ADDR (0x08000000 + FLASH_SIZE - SETTINGS_BLOCK_SIZE)
// Number of GPIO ports A,B,C...
#define PORTS_COUNT 6
// Lock jumper config
#define LOCK_JUMPER_PORT 'F'
#define LOCK_JUMPER_PIN 1 // OSC OUT, not used in BYPASS mode (receiving clock from the ST-Link MCO)
// Status LED config
#define STATUS_LED_PORT 'C'
#define STATUS_LED_PIN 6 // RED LED "UP"
#else
#error "BAD PLATFORM! Please select GEX platform using a -DGEX_PLAT_* compile flag"
#endif
#endif //GEX_PLAT_COMPAT_H