GEX core repository.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
gex-core/units/spi/_spi_init.c

195 lines
5.2 KiB

//
// Created by MightyPork on 2018/02/03.
//
#include "platform.h"
#include "unit_base.h"
#define SPI_INTERNAL
#include "_spi_internal.h"
/** Allocate data structure and set defaults */
error_t USPI_preInit(Unit *unit)
{
struct priv *priv = unit->data = calloc_ck(1, sizeof(struct priv));
if (priv == NULL) return E_OUT_OF_MEM;
// some defaults
priv->periph_num = 1;
priv->prescaller = 64;
priv->remap = 0;
priv->cpol = 0;
priv->cpha = 0;
priv->tx_only = false;
priv->lsb_first = false;
priv->ssn_port_name = 'A';
priv->ssn_pins = 0x0001;
return E_SUCCESS;
}
/** Finalize unit set-up */
error_t USPI_init(Unit *unit)
{
bool suc = true;
struct priv *priv = unit->data;
if (!(priv->periph_num >= 1 && priv->periph_num <= 2)) {
dbg("!! Bad SPI periph");
// XXX some chips have also SPI3
return E_BAD_CONFIG;
}
// assign and claim the peripheral
if (priv->periph_num == 1) {
TRY(rsc_claim(unit, R_SPI1));
priv->periph = SPI1;
}
else if (priv->periph_num == 2) {
TRY(rsc_claim(unit, R_SPI2));
priv->periph = SPI2;
}
// This is written for F072, other platforms will need adjustments
// Configure SPI own pins (AF)
char spi_portname;
uint8_t pin_miso;
uint8_t pin_mosi;
uint8_t pin_sck;
uint32_t af_spi;
// TODO
#if GEX_PLAT_F072_DISCOVERY
// SPI1 - many options
// sck, miso, mosi, af
if (priv->periph_num == 1) {
// SPI1
if (priv->remap == 0) {
spi_portname = 'A';
af_spi = LL_GPIO_AF_0;
pin_sck = 5;
pin_miso = 6;
pin_mosi = 7;
}
else if (priv->remap == 1) {
spi_portname = 'B';
af_spi = LL_GPIO_AF_0;
pin_sck = 3;
pin_miso = 4;
pin_mosi = 5;
}
else if (priv->remap == 2) {
// large packages only
spi_portname = 'E';
af_spi = LL_GPIO_AF_1;
pin_sck = 13;
pin_miso = 14;
pin_mosi = 15;
}
else {
return E_BAD_CONFIG;
}
}
else {
// SPI2
if (priv->remap == 0) {
spi_portname = 'B';
af_spi = LL_GPIO_AF_0;
pin_sck = 13;
pin_miso = 14;
pin_mosi = 15;
}
else if (priv->remap == 1) {
// NOTE: the's also a incomplete remap in PB and PC
spi_portname = 'D';
af_spi = LL_GPIO_AF_0;
pin_sck = 1;
pin_miso = 3;
pin_mosi = 4;
}
else {
return E_BAD_CONFIG;
}
}
#elif GEX_PLAT_F103_BLUEPILL
#error "NO IMPL"
#elif GEX_PLAT_F303_DISCOVERY
#error "NO IMPL"
#elif GEX_PLAT_F407_DISCOVERY
#error "NO IMPL"
#else
#error "BAD PLATFORM!"
#endif
// first, we have to claim the pins
TRY(rsc_claim_pin(unit, spi_portname, pin_mosi));
TRY(rsc_claim_pin(unit, spi_portname, pin_miso));
TRY(rsc_claim_pin(unit, spi_portname, pin_sck));
TRY(hw_configure_gpio_af(spi_portname, pin_mosi, af_spi));
TRY(hw_configure_gpio_af(spi_portname, pin_miso, af_spi));
TRY(hw_configure_gpio_af(spi_portname, pin_sck, af_spi));
// configure SSN GPIOs
{
// Claim all needed pins
TRY(rsc_claim_gpios(unit, priv->ssn_port_name, priv->ssn_pins));
TRY(hw_configure_sparse_pins(priv->ssn_port_name, priv->ssn_pins, &priv->ssn_port,
LL_GPIO_MODE_OUTPUT, LL_GPIO_OUTPUT_PUSHPULL));
// Set the initial state - all high
priv->ssn_port->BSRR = priv->ssn_pins;
}
hw_periph_clock_enable(priv->periph);
// Configure SPI - must be configured under reset
LL_SPI_Disable(priv->periph);
{
uint32_t presc = priv->prescaller;
uint32_t lz = __CLZ(presc);
if (lz < 23) lz = 23;
if (lz > 30) lz = 30;
presc = (32 - lz - 2);
LL_SPI_SetBaudRatePrescaler(priv->periph, (presc<<SPI_CR1_BR_Pos)&SPI_CR1_BR_Msk);
LL_SPI_SetClockPolarity(priv->periph, priv->cpol ? LL_SPI_POLARITY_HIGH : LL_SPI_POLARITY_LOW);
LL_SPI_SetClockPhase(priv->periph, priv->cpha ? LL_SPI_PHASE_1EDGE : LL_SPI_PHASE_2EDGE);
LL_SPI_SetTransferDirection(priv->periph, priv->tx_only ? LL_SPI_HALF_DUPLEX_TX : LL_SPI_FULL_DUPLEX);
LL_SPI_SetTransferBitOrder(priv->periph, priv->lsb_first ? LL_SPI_LSB_FIRST : LL_SPI_MSB_FIRST);
LL_SPI_SetNSSMode(priv->periph, LL_SPI_NSS_SOFT);
LL_SPI_SetDataWidth(priv->periph, LL_SPI_DATAWIDTH_8BIT);
LL_SPI_SetRxFIFOThreshold(priv->periph, LL_SPI_RX_FIFO_TH_QUARTER); // trigger RXNE on 1 byte
LL_SPI_SetMode(priv->periph, LL_SPI_MODE_MASTER);
}
LL_SPI_Enable(priv->periph);
return E_SUCCESS;
}
/** Tear down the unit */
void USPI_deInit(Unit *unit)
{
struct priv *priv = unit->data;
// de-init the pins & peripheral only if inited correctly
if (unit->status == E_SUCCESS) {
assert_param(priv->periph);
LL_SPI_DeInit(priv->periph);
hw_periph_clock_disable(priv->periph);
}
// Release all resources
rsc_teardown(unit);
// Free memory
free_ck(unit->data);
}